How to Install a COMPLETELY New Front Suspension in your Car or Truck
HTML-код
- Опубликовано: 19 апр 2019
- Learn how to replace the ENTIRE front suspension of your car in this two episode series. Here I will show you how to install a brand new wheel bearing, ball joints, control arms, tie rod, strut, and axle.
The ball joint and wheel bearing has to be pressed into the knuckle and I have a bunch of tips and tricks to make that easy. I show how to properly install a tie rod (safely) and get an accurate measurement so you can get the car aligned. I also show you how to properly torque down bolts with bushings so you don't tear them. The rest of the suspension parts are pretty simple to install and then we go for a ride to see how much better the car handles!
First EPISODE: • How to Rebuild the Ent...
How to Replace Sway Bar End Links: • How to Replace Sway Ba...
How to Replace Wheel Bearing: • How to Replace a Front...
Tools and Products:
Extendable Ratchet Set: amzn.to/3PzSjOs
Mevotech Suspension Parts: amzn.to/2VKrmfr
Rust Paint: amzn.to/2Dg5yAV
Impact gun: amzn.to/2It3KIo
Torque Wrench: amzn.to/2UO2yFY
Bearing Press: amzn.to/2Gh8tv3
Ball Joint Press: amzn.to/2UTxEvR
Silicone Paste: amzn.to/2DsSisN
Grease Gun: amzn.to/2Iy11hm
Chassis Grease: amzn.to/2IGc2g5
→ Become a ChrisFix Subscriber: ruclips.net/user/subscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. 
Авто/Мото
I am pumped now that the suspension is all good and the surprise at the end of the video! We are gonna have some fun with this car!
PS I will have a car meetup in Toronto Canada this Tuesday. Check my stories on RUclips, Instagram or Facebook page for more info!!!
Cant wait!
ChrisFix bro I have been subscribed since u we’re doing vids bout how loud Corvettes were
ChrisFix what software do you use to edit?
nice
I’ll love it
What Chris loves:
-his family
-drifting
-cars
-soapy wooder
-Cooper
-blinker fluid
-medium strength thread locker
Also soapy water.
@@Pogaspm wooder*
@@zonda4388 Sorry.
and the brekerbahh
That’s true 🤣
I find it funny that you buy your mom a car and you’re not allowed to put a balljoint in the freezer lol. Great Vid!👍🏼
I find it funny that he hasn't used that RUclips money to get his own pad.
@@9HighFlyer9 more money for car parts
Right!
HighFlyer he’s smart
@@9HighFlyer9 Why do you think he lives at home?
Chris you are the MAN!! I have saved $2700 in car repairs by doing it myself watching your videos. You are one of the best car repair instructors on RUclips. My car is running so much smoother and with excellent response. Thank you for taking the time to show the world how to do car repairs the RIGHT WAY!!!
Glad to help and nice work!
ChirsFix, a kind of guy that returns tools in a better condition than when he picked them up. Good guy Chris.
😂I can see the meme now. “Borrows tools, returns them cleaned and polished”
Can you imagine having ChrisFix as your neighbour?
...doorbell rings
"HEY GUY, ChrisFix here, and I need about a cup of sugar to make some medium strength cupcakes"
2dfx 😂
Or just watching through your window as some absolute weapon with a camera is going at it.
lol
Lol😂😂😂
Whish he was so I could borrow some tools from him
The best thing on youtube will be... A Chrisfix Ebay Turbo install video.... I promise you, it'll be the best install video ever!!!
ABSOLUTELY!🔥🔥🔥
True
Or an ebay supercharger install
Hell yeah
@@alexandercurtis4427 turbo is probably. Better
Chris, Your videos have been so helpful. My son is 16 and just bought his first car and we've been working on it and watching your videos for guidance. Thank you for what you do! Your presentation, quality, and content are unmatched on RUclips. The videos are easy to watch and extremely informative. Once again, Thank you.
Thanks a lot! I'm glad the videos have been providing guidance on his car!
How’s the car going 9 months later?
@@Lovesausage269 damn 8 months later and he still didn’t reply to you. How do you feel sir?
@@A-Karim2003 I can only assume they didn’t do a very good job and are still in a coma
@@Lovesausage269 I think the kid got into an accident and died.
While i don't see myself rebuilding the entire front end, this was a very informative video & gave me a better understanding of the front end of the vehicle
I'm glad you still found the video informative!
I really enjoy how Chris' wife/mother is presumably totally fine with a driveway full of cars being worked on and a garage full of tools, but bearings in the freezer - thats where they draw the line.
yeah ! when they know how much money he generates from youtube they should more than fine with whatever is happening in that driveway lol
why doesn't this have more likes?
Why?
It's actually his mother lol, but your so right lmfao
@@shepshepson hence why he said wife/mother
25:21 casually has turbo kit on the ground
@@NoName-tm8pn lol
Amazing the knowledge that people can gain ...I wondered about how Chris was as a kid...who did he look up to...how was he introduced to mechanics/cars ...and who ultimately fostered that interest turning it into the thing that helps US...the REST of the world!? Kudos to his mentor and kudo's to Chris for having such a generous spirit to share with us!
True. Good observation
Idk if you've already checked this out but his appearance on Graham Stephens' podcast clarifies some more about his story 🤠
I've been doing this for many decades. Even though you're using hand tools and no full fitted workshop it's very clear you know what you're doing. A lot of very good guidance for those that don't. Really good videos Chris.
Nice I've been waiting to put my car back together since the last video
nice, i also startet rebuilding the front suspension of my 1999 audi TT after i saw the last video ;)
Lol
Nice! Now you know the proper way to do it! Luckily you only had to wait a week. Could have been a month!
Most importantly, it does not need sooaaapy waader
ChrisFix oof
Still cant understand who would dislike Chris' videos...
Obviously its mechanics that charge outrageges prices to do this job lol
@@ADGaming-7619 I'm a mechanic and I have no say in how much I get paid for fixing a car. I get paid a set amount of money for each job I do. The other day I spent 3 hours chasing wires and I only got paid an hour of labor. It's the shop who makes all the money lol. Plus most mechanics/technicians love Chrisfix, ETCG, Humble Mechanic, EE, and that one guy who rails lines of coke and sleeps in his trunk. Even the older guys watch these. You can learn a lot even from DYIers
Dislikes came from those who didn't grasp the instructions at first try😀.
ASSHOLES ... ASSHOLES DISLIKE THEM ,THE GUY IS JUST TRYING TO HELP.
haters, who else? lol
Thanks for making cars not scary for me. Doing your own work and saving huge amounts of money feels so good.
You’re doing a great thing with this channel, Chris.
I work at a dealership and I started watching your videos when I was a porter at the beginning of 2022.. I’m doing main shop work now on the side and I’ve gotten so much better by watching your videos. Thanks Man !
"Always lubricate the shaft so it doesn't go in dry"
- Chrisfix 2019
That's what she said
Great advice! 🤣
That’s not what she said...
Like seriously.... that’s actually what he said
And you got 69 likes lol
LMAOOOO
Nobody:
Chrisfix: "Let's put on some medium strength thread locker."
Lmao
We use salt...
But the bolt will come lose if you don't put medium strength threadloker on it
@Livin Vids he's just trolling
@Livin Vids he's trolling, salt will rust metal
I've got new suspension for my C4 Corvette coming in soon. I'm gonna be watching this over and over in preparation. Your channel is my favorite resource for working on cars and I always reference your videos before starting work. Thank you so much for taking the time to show us how to do all these things!
EDIT: I also remember watching this video many times before working on my Crown Vic's suspension as well!
Man I miss my vic. How did it go?
Love the way you make things look so doable for the average person working on their vehicle. Your videos are absolutely my favorite to watch when I am looking to try my hand at replacing something on a car/truck or even just to garner some knowledge for future projects. Thank you for the video!
ChrisFix adds medium strength thread locker to his pancakes.
And greases his butthole
@@siddharthkapoor1056 "*always be sure to fully lubricate*"
@@siddharthkapoor1056 ahahaahhahahahah
amazing!!
Thread locker companies love him..
Mechanic shops hate him!
lol
lol
ChrisFix I watch your videos everyday
He lost my mechanic about $700 dollars so far lol
Bruh, thread locker thread locker, it’s very expensive in your local mechanic
I just bought an 08 volvo c30 t5 and the entire suspension needs replaced and both estimates for work was over 3 grand. Nearly half of what I bought the car for. This is pure gold. Got the parts on order since I already had 3/4ths the tools needed for this.
Thanks!
Hey Chris! Thanks to your detailed gutting and fresh install of the front suspension, I was able to do mine seamlessly. Your easy to follow guides are phenomenal!
Who else will not be replacing their suspension anytime soon, and it’s just that chrisfix is god and we must watch every video lolol
Haha, i don't even own a car yet, he's jus good to watch😂😂
Jay McHugh same
Chrisfix got me thinking should i replace my 04 grand am suspension now 😂
I'm rockin a 94 Integra. I've been slowly replacing bits and pieces of my suspension over the last few years. But after watching this I'm thinking I might just do it all at once so it's done right. But Chris always makes it look much easier than it is.
Yes
Me at auto zone: hey Chrisfix said I can rent bearing installer
Auto zone employee: who tf is Chrisfix
Chrisfix : hey guys, Chrisfix here and am bout woop your ass if you don’t rent your tools for free to my subscribers
Most of them know of me which is nice and they all rent tools so don’t worry!
@@chrisfix I live in Italy, it's very hard to find a shop that rents their tools here, and it's usually a pretty expensive service.
When I was younger I used to buy the most expensive tools together with a close friend, by paying 50-50 and then sharing them while needed.
@Bunda Par Indeed.
The people at my autozone would say, what tf is a bearing installer?
Watching in 2024. Thanks Chris.This is Gold !
Thanks a lot!
Chris is like the Mechanic God or Guru his videos taught me how to do body work patching holes, and rust sanding, I just learned how to change inner and outer tie rods now I'm learning how to redo my entire front suspension this is great stuff
My car has been sitting in the air for a week solid
Should have waited for the other video
@@louisegreen29LOL
Lol this comment made me laugh to hard 😂
The Music Plug lmao
I got you beat. My truck's been on the frame, on jack stands, since the start of winter. But I'm getting it close to being road worthy again.
Next video
Hey guys chrisfix here😀
Today i am gonna show you how to build a airplane with simple tools. All you need is a hammer jack and some wrenches😉🤣🤣🤣
Lol😂😂😂
You forgot the soapy wooder xD
Probably be more reliable than Boeing at this point
Thankyou guys for all the likes. Yea soapy water chrisfix edition 😂😂
@@alexzummo5342 🤣🤣Yup
This is cool thank you! I'm learning from ZERO here. I had to watch it like 6 times to understand the whole thing, I was stuck on the lower arm installation and then I realized those bushings are not shown in the beginning neither the Strut fork. Thanks man!
A natural talent for teaching and also editing! I can’t even imagine how long these videos take to put together. I’m about to tackle my second full front end suspension install. The only reason I was ever comfortable doing it at all is because of ChrisFix! You’re the best! Thanks for being the best!
anyone else find these soothing af?? literally watching this with a drink. confidence that its helpful and true, but also entertaining. Quality content sir.
Turbo?!
Oh yeah, that is what I'm talking about
Keep it up Chris!
I rewatched part 1 and 2 about 13 times. I can't wait for Rear suspension video
Subscribed ! Great Instructional Videos Chris ! 50 years old and replaced my Brakes, Rotors and Calipers first time ever thanks to your Videos !!
Nobody :
ChrisFix : "Out with the old, in with the new"
Never let the axle go in dry.
Chrifix probably puts threadlocker on the lid of his milk jugs 🤣
Jokes aside, awesome video as usual!
*medium strength
Does he put anti seize on the orange juice?
right after cleaning it with soapy wooder xD
i would too but in canada we have milk bags
But how tight does he torque it
My favorite part is “I’d get in trouble for that” under his breath so relatable you are my favorite RUclipsr weather it was ur mom or ur wife I feel u bro, ur videos are the BEST, you’re a real one
The fact that he uses all of his life time and effort to make this videos to learn to us how to fix our cars without moving an inch is awesome keep up the good work bro
Always nice to watch someone who loves what they do
Chris: And I bought a ebay turbo kit for the Honda
Me: *surprised Pikachu face*
Omega LTU i heard they were wu tang war whistlers but it could be nagasaki noisey bois
@@sean0611 The nagasaki noisey bois about to rip!!!!!
I have to say this is the most instructive video on car maintenance I have ever seen. Very easy to understand. Thank you.
Hi Chris, like all of your DIY videos, this one is just as amazing! I just recently aquired a 2005 Saturn Ion 2, Pacific Blue, 4 door coupe, with 5 speed manual transmission with over 214,000 miles, in desperate need of having its loose front end steering suspesion replaced. I have a realatively good idea of the time and the work needed to get the job done, and you shared several valuable tips on making it that much more easier. Thank you for being such an inspiration to all and your care and attention to detail. Great work on your step-by-step detailed explaination and excellent video editing. Your videos and your sense of humor make your videos so much fun to watch! Thank you!
Thanks a lot! Good luck with the car!
That torque wrench click sound is satisfying.
I hope Santa brings me one this year.
Sounds like my knuckles
Yeap until I learn then if you drop the torque wrench you need to resend for calibration 😞
You're the man Chris. Your videos helped me fix my car, then my families cars and now I work in an actual shop making $18 an hour and I haven't even got any ASE certs. Your videos videos made it look easy, so I tried. Sure enough I could do it and I enjoy doing it! Thanks man.
Nice man! where you work at? I work in a shop too but they don't pay as good.
@@camilohernandez17 you got gosted
@@camilohernandez17 he’s not going to
reply dude
Lmao
Another amazing video ChrisFix! I have no intention of ever taking apart and reinstalling the suspension on any car and yet I watched both videos in their entirety just because you do such a great job at explaining everything, and I’m just curious about the process. Thanks
Yeah it just help understand what people are talking about - I never understood what tie rods were etc.
I felt so much excitement and Joy when he gave it a ride after alignment! That accomplishment and work paid off
Anyone else just watch the videos for satisfaction rather then actully doing what he’s doing 😂
Joe Bidion Oh absolutely. I find it very cathartic. There’s no in hell I’m actually doing this shit in real life though.
Yep. I wish there were more time and more money for me to do that though.
Why? Everything he did is pretty simple.
@@John_Rod Yeah man these guys gotta get out and try. Start slow like changing the oil, then the spark plugs, then the brakes, then timing belt, etc etc
J Rodriguez I don’t have the time or an appropriate place to fully redo the front suspension on a car. I wish I did, but alas I do not.
Everyone: man you need VERY expensive tools to fix cars
Chrisfix: hold my soapy wooder/beer
Minimaster 56 lmfaoooo😂😂😂
Torque wrenches are hundreds of dollars my dude.
@@Brunghis you can get a cheap reliable one from amazon
@@elias8294 or rent one
Noir A I link the professional torque wrench I use in the description and it’s under $100.
This is one of the best videos I've seen explaining how a car is put together. I've always enjoyed learning how cars work and watching a suspension system installed really shows how steering and drive power make sense. I wish I could play around with cars and learn hands on, but I don't have the resources or space. Loved this video!
You are a brilliant RUclipsr and great car mechanic!! I pray you are always healthy and safe
I was so fascinated by what ChrisFix was doing that I finished watching the whole video
Me to
😂😂😂 me three
Same BHAHAA
Absolutely yes! His every video I watched fascinated me ❤️
me four
Feeling cute. Might change my whole suspension. Idk
😂😂😂😂😂
Feeling cute might do a suspension delete later
I did not foresee my driver's side lower control arm bolt being blocked by the transmission mount on my '03 TL lol! Found a video of someone removing the same LCA on the driver's side of an '02 Accord, lo and behold it's the same suspension structure as my TL! I had to raise the transmission a few inches to remove the mount (so nerve-racking) but I did it and completed the full suspension rework. You can do anything if you do your research and get your hands dirty! Thanks ChrisFix, your detailed videos give me so much confidence working on my car!! :)
i have absolutely no experience fixing cars and this is so amazing. you are so knowledgeable and skilled. i'm amazed!
Best Mechanic On The Internet👌 💯
No Questions Asked.
Thanks John
@@chrisfix you're beautiful chris
@@chrisfix You're welcome. You're videos have taught me stuff that I've always wanted to learn. You make it easy for us beginners 💯
@@R.E.HILL_ Maybe you should make a RUclips channel...I haven't checked, but if you make videos on how to do the stuff he does. Then maybe I'd follow you too and see who does it better, but from what I know. He is very detailed on everything, unlike people that I've watched that just say, it's okay if it breaks, or just keep turning, and if the bolt breaks, buy a new one, etc. Hes professional. It's also a DIY channel. So let it be. Thank you.
Awesome video man, the production quality is insane, CAN'T WAIT FOR THAT TURBO VIDEO BUILD
Thanks
@@chrisfix Hey chris can you link the kit you bought?
after coming back to your channel after a year long brake I've gotten so interested in working on cars that I am now starting to do just that and I would like to thank you for the amazing content you produce. Your content is very in depth and detailed and I cant wait to see what you have in store for us in the future!
You make it look very easy to install the whole suspension system by self than what it actually is. Good job bro. Keep doing this, you got one subs from me
Almost 2 years, and here i am still waiting for the turbo video for this one...
I'll be able to do that once the dynos and tuners can open up again! The virus unfortunately changed around a lot of plans around with regards to turbo/supercharging and a lot of other videos, but I have received some good news about when I'll be able to get that done now! Stay tuned!
Oh my, i didnt expect you will notice me! Im sooo happy! You’re such a big inspiration Chris, you are the reason why automotive is my passion, doing DIY on my super budget project car i learn too much from you, just wanna say thank you so much hope you can read this! Oh my im so happy ❤️
ChrisFix ohh i see, but now this is a good news from me knowing that this project is still on going, hoping to see more Entertaining and Very educating videos from you! :)
@@chrisfix I'm also been waiting for this video for a while now. Stay safe brother and I'll stay tuned!
@@minhpham27 Not sure if the pun was intended or not... but damn it was good 😂
ChrisFix is so satisfying to watch I’m just waiting to see that turbo kit installed 😉
Buzon
Me too
What about twin Turbo
Used this info to completely rebuilt the front suspension on my '99 4x4 Dakota. Even if the Dakota suspension is more complex, torsion bars being involved, the same principle applies as described in this excellent video and it turned out very nice...Thanks for posting!
do u know how to get stock torsion? ima have to rebuild my suspension and steering and im not sure how to key the torsion bars to stock level. 98 dakota 4wd here.
You gave me the confidence to rebuild my own suspensions on my cars and I know you save thousands of people hundreds of thousands of dollars great job
Thousands of people and hundreds of thousands of dollars… hmm
My dude. I work at a dealership in parts/service, and I think what you do here is amazing. So many customers could save thousands if they simply followed your step by step guides. This is a service to the public and enjoyable to watch for those of us who already know how.
Like I always say it's the internet age and college is obsolete
@@birdman1128 tell that to your medical team if you ever find yourself in the hospital
@@GuitarGuy650 I never get sick or hurt
@@birdman1128 🤣 Lol okay .You must be a teenager who still thinks that they're invincible because this is genuinely the funniest thing I've read in a long while
@@youcancallmedaddy72 thy have the cure for cancer locked away in a vault somewhere because it's more profitable to treat the disease than to cure it
your videos are the best, thank you for making them
Thank you!
Very fine job sir!
@@chrisfix one day I'm gonna buy my own set of tools and my own car to repair it! At least the cheaper parts, cuz some replacements are expensive!
Man! I wish you would have down a lowered 2002 Chevy Silverado this way!! I’ve learned so much in this video, what names are the parts that I had no clue what was their purpose, grease fittings and the function of parts. You explain things so well. I appreciate your time & skills in editing this video for us. Thank you!
Ive done front suspension work a few times, mostly cv axle replacement, but i wish i had seen this video before, very informative.
2015 MOOG: wILl ThIs fIT iN My hONdA?
2019 ChrisFix: Will it fit in my Honda?
Damn what a time to be alive
There was definitely audible laughter ringing out from my office when that text popped up.
Love your vids, straight to the point with no filler. Keep it this way, awesomeness!
Great video Chris! I’ve been watching your videos for years. It has helped me fix so many problems on my own can’t thank you enough for taking the time to do these videos.
Chrisfix uploading a new video is like a dream coming true!!!
"Lightly tap it with a hammer" *WHAP WHAP WHAP WHAP WHAP* Perfect! XDXDXDXDXDXD
18:34
tappy tap tap
I thought binge watching is only for Netflix originals! Your videos r so informative, addictive. Thanks a ton Chris. I know I never do this repair myself but still I watched till end! So well made and right to those subtle details.
Seeing how easy all of these things are is amazing. Your saving millions of people hundred of dollars. Thank you Chris Fix.
who else is still waiting for him to put on the turbo kit?? cause am!
Hes 2 busy driving his new truck no more video updates.
He still bought his dreamcar lol
Me too
Yes, I am too. Come on chrisfix. Put on the Turbo already
Meeeeee.....
You know it’s a good vid when it starts off like “HEY GUYS, Chris Fix here!”
@chrisfix I've learned sooo much from you with only knowing how to do an oil change! You're literally a life saver man. My mom's car got hit and we can't afford a shop so this video helped me rebuild her suspension! You're the greatest man!
Chris has saved me more money than anyone could ever thank u love how you explain everything so easy and understandable
My brain:
How To Install A COMPLETELY New Car Or Truck In Your Front Suspension
I think its the other way round
@Nathan craft that’s exactly the point
now it just needs a fresh coat of paint and a detail, maybe a tune up, and you’ll have a perfect Honda DelSol.
Exactly
That turbo kit and a decent exhaust would be great.
Please do a video on how to paint a car sometime in the future
ChrisFix are you going to wrap the del sol or paint it
@@MrPhatties kolam
.
This is a great video . I am tempted to try doing this on my 2011 Sienna on which I got rear shocks and front struts only replaced. I went to CB and they said the whole suspension needs to be replaced, control arms and all! Dealer said everything looked good, except for one small leak in a rear shock which can wait. And a small business repair owner advised replacing just the shocks/struts plus sway bars only, stating springs and other components are okay - he didn't want to replace things that were in acceptable condition! After this was done, although I do notice some improvement, I can still feel the bumps in the road and noise, although less than before, but not as much reduced as I thought they would be, like in a new car - which was a bit disappointing. It is intriguing to me to know where all the 'soft cushioning' comes from, that 'rounds off' the bumps' impact into a nice thud. It's been a nagging question in my mind as to what else needs to be done. Perhaps if you have time, you will be able to explain the symptoms that can be experienced when different components individually degrade, so that we viewers can have some sense of what component is likely the cause. Also how long does it take for a novice to do something like this. A lot of videos advise caution w.r.t damaging brake lines or other wires etc.
Bro you have literally saved my life I'm 17 growing up life's hitting shit happens and I'm lost and your helping me out of alot from showing me how to fix my car
Keep those Honda Civic vids coming buddy!your tapping into a strong community!!!
Michael M. Del sol
This car isn't a ricer, it's a ruster
Captainriri021 Gaming Del Sol is a Civic.
@@spartacussmith7070 technically the Del Sol is based off the CRX, which in turn is based off the Civic. It was sold in foreign markets as "Civic Del Sol" and "CRX Del Sol", only in North America it's called "Del Sol"
I don't need replace my front suspension, but it was soo satisfying.
I dont even have a car
Same hahah
@@eathanrichards6363 bruh same here
just now found this channel. I was on a, A1 auto install video and someone made reference to this channel, I came to check it out and now I am hooked. great channel Crisfix. thanks for the great information.
Man you make it look so easy, took me 3 hour to replace the struts on a mulibu 2011, thank you for all the tips 👍👍👍
Chris: *Uses common hand tools*
Me: "I could do this"
Chris: "Now get out your grease gun"
Me: "oof"
Love you tho
Hahahaa i feel you bro.i dont have it as well.hahahhaa
You can rent a grease gun :-)
wait...
This made me laugh too hard
@@moejoejoe works every time.
A grease gun is very common though. One of of the most useful mechanic tools...
I just found your channel about 4 days ago.
*I was planning to buy my first car, because I've used the one my father had, but since June I live in another country*
I own my drivers license for almost 2 and a half years, and I wasn't interested about learning how to superclean your car, or how to fix a rusty part.. Honestly I thought it is too hard for me, and i'd rather be paying a couple hundreds of dollars for a mecanic instead of doing it myself.. "BTW i don' t have the required tools" - or that's what I've thought-
A few days earlier I've found your channel, and I started to be interested, and to feel more confident too. I've inspected a car today(the Chrisfix way) and I've negotiated the price for almost the half of it.
I am really excited to see your next videos too, and I just want to say thank you from all of my heart, your channel had changed my thoughts about cars, and fixing them. Thank you Chris :)
That’s awesome man!
Wow that’s deep man
That's deep bro lol
That's real deep dude
Great little pointers and tips! Love the bungee cord and axle move.
Great job just went through this with my car in the shop and there is alot to the install but I did everything except shocks and struts , excellent presentation and install and enjoyed your video.
Hell yes! So stoked for the turbo build.
Thanks to ChrisFix, I started hating all vehicle repair shops that don't use medium strength threadlocker in my country :P haha
lol
dude I never comment on any videos ever but just seeing chrisfix replace his suspension system was satisfying and the work well done is always very much appreciated
I do love how you explain the pressing of the ball joint and the bearing. Id say inform the viewer that on most cars you're able to get the control arm with the balljoint already pressed in. The same goes for the bearing. Although the bearing will be more common to have to press it in.
It's nice when they have parts like that but good to show regardless!
Man i love watching these kind of videos. 3 months ago i knew nothing about cars, and now i'm working on my car every weekend, replacing this and that, it's awesome!
Its cool to be able to fix them but I don't look for shit to do.
Love how this guys makes everything simple and organized makes me want to build an repair cars for a living
I'm glad you find the videos simple and organized!
Better choice than college...you will always have a job.
Actually he's the guy who made me get into cars 2 and a half years ago, before that I wasn't interested in cars, and now I'm starting my business flipping old cars and restoring them.
@@defalt45 bro what are you serious I started watching him 3 years ago and all I’ve done is give all my friends cheap tune ups
@@tygill7401 then starting working on cars more? When you get the money buy a cheap project car in bad condition and repair it/mod it/resell it and make a profit.
The great thing is that how you sequencely put all things apart before installing...keep the good work up chris....like you do everytime...
I LOVE the ending! How happy and smooth his car is!! 🚗 💨