Great fit with my A6700. I added a 25mm Arca Swiss plate to the left side for vertical mounting to tripod. It doesn’t interfere with any of the doors or the movement of the display. I also like the NATO rail on the left side and ARRI mount on the top for quick mounting of side and top handles when used for video. I like that it has a QD socket on the bottom which gives me another strap mounting option and it doesn’t interfere with the PD Capture plate that I also installed at the bottom. The only downside is I already lost the magnetic mounted tool during normal use. Not a big deal as Small Rig does sell the replacement tool for less than $5.
I could see my tool going missing as well.. I've noticed it's kind of loose and moves around a bit in it's storage spot, lol. I really like the versatility of the cage and how it doesn't add much bulk to the camera so the whole setup still keeps down at a reasonable size and weight. My only gripe is that the corner shoe is very loose with my DJI mic receiver and I have to slide a small piece of paper in there under the mic which is kind of a clip which doesn't have a way to "tighten" it in place like my flash has. The receiver fits tight in the top center shoe on the camera itself but it's hard to slide it into place as it impacts with the viewfinder cover and kind of annoying needing to remove it each time. I have some Peak clutch grip which is super nice but it blocks the battery door and has to be removed each time you swap the battery and just became more of a headache than it was worth, lol.
@@kentao4 HAHA yeah, I def got way to much stuff the first few times I went. Now when I just drop by on the way home is to park and peep my car in the sweet gas station lighting and to grab a coffee :D lol.
Похоже, что переходная пластина ручки SmallRig MD4019 предназначена только для FX30/FX3 и клеток 3667, 2999, 3241, 3639 и 3594. Для комплекта SmallRig Cage Kit 4336 не требуется переходная пластина для ручки, поскольку в верхней части клетки уже имеется установочное отверстие ARRI 3/8"-16 и резьбовые отверстия 1/4"-20 для крепления ручки, а также точки крепления на стороны клетки. Вам просто нужно убедиться, что отверстия, встроенные в клетку, совпадают с любой ручкой или приспособлением, которое вы хотите использовать.
Nope... A flash works perfectly fine with the cage. I just reconfirmed fitment and hooked up my Godox v860iii and it attaches fine with plenty of room between it and the cage.
@@D3RPZILLA If so, I think I will buy the cage because not only it’s the lightest one among others, but also it doesn’t block my installed Godox V860III.
Great fit with my A6700. I added a 25mm Arca Swiss plate to the left side for vertical mounting to tripod. It doesn’t interfere with any of the doors or the movement of the display. I also like the NATO rail on the left side and ARRI mount on the top for quick mounting of side and top handles when used for video. I like that it has a QD socket on the bottom which gives me another strap mounting option and it doesn’t interfere with the PD Capture plate that I also installed at the bottom. The only downside is I already lost the magnetic mounted tool during normal use. Not a big deal as Small Rig does sell the replacement tool for less than $5.
I could see my tool going missing as well.. I've noticed it's kind of loose and moves around a bit in it's storage spot, lol. I really like the versatility of the cage and how it doesn't add much bulk to the camera so the whole setup still keeps down at a reasonable size and weight. My only gripe is that the corner shoe is very loose with my DJI mic receiver and I have to slide a small piece of paper in there under the mic which is kind of a clip which doesn't have a way to "tighten" it in place like my flash has. The receiver fits tight in the top center shoe on the camera itself but it's hard to slide it into place as it impacts with the viewfinder cover and kind of annoying needing to remove it each time. I have some Peak clutch grip which is super nice but it blocks the battery door and has to be removed each time you swap the battery and just became more of a headache than it was worth, lol.
I went to the Buc-Ee’s in TN for the first time this weekend. Massive!
Haha, nice! Buc-ees is the bomb! I live like an exit away from one and stop almost every day on the way home from the gym, lol.
@@D3RPZILLA lol not from the gym! I drove from the Philly area. I’d be 300 lbs if I was close! I bought one of everything I swear!
@@kentao4 HAHA yeah, I def got way to much stuff the first few times I went. Now when I just drop by on the way home is to park and peep my car in the sweet gas station lighting and to grab a coffee :D lol.
@@D3RPZILLA nice! I get it. I drove down to break mine in on the tail of the dragon. That was a blast.
Я так понимаю, что установить SmallRig MD4019 на SmallRig Cage Kit 4336 не реально?
Похоже, что переходная пластина ручки SmallRig MD4019 предназначена только для FX30/FX3 и клеток 3667, 2999, 3241, 3639 и 3594. Для комплекта SmallRig Cage Kit 4336 не требуется переходная пластина для ручки, поскольку в верхней части клетки уже имеется установочное отверстие ARRI 3/8"-16 и резьбовые отверстия 1/4"-20 для крепления ручки, а также точки крепления на стороны клетки. Вам просто нужно убедиться, что отверстия, встроенные в клетку, совпадают с любой ручкой или приспособлением, которое вы хотите использовать.
fkng awesome bro
Thank you! 🙏
Will this cage block the usage of external flash?
Nope... A flash works perfectly fine with the cage. I just reconfirmed fitment and hooked up my Godox v860iii and it attaches fine with plenty of room between it and the cage.
@@D3RPZILLA Wow, that’s a great news. Believe it or not, our flashes are the same.
@@D3RPZILLA If so, I think I will buy the cage because not only it’s the lightest one among others, but also it doesn’t block my installed Godox V860III.
@@IngriqiDin awesome! Yes, you will have no issues with that flash and cage combination. Tons of space for everything to fit perfectly.