How to Replace Rear Brakes 2007-2013 Chevrolet Silverado 1500
HTML-код
- Опубликовано: 26 авг 2024
- Buy Now!
New Brake Shoe & Drum Kit from 1AAuto.com 1aau.to/ia/1ABD...
This video shows you how to install rear brakes on your 2007-2013 Chevrolet Silverado 1500. Even though they are an older technology, you still find drum brakes on the rear of many modern vehicles. Like disc brakes, the brake drum and shoes will wear down over time, requiring replacement.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa8r/1A...
• Pocket Screwdriver
• 8mm Wrench 1aau.to/ogQ/1AX...
• 22mm Socket 1aau.to/omM/1AX...
• Brake Spring Tool
• Needle nose pliers 1aau.to/oza/1AX...
• Needle nose pliers 1aau.to/oza/1AX...
• Pliers
• Ratchet 1aau.to/obmC/1A...
• Torque Wrench 1aau.to/oaro/1A...
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oyr/1AX...
• Dust Mask 1aau.to/or/1AXS...
• Gloves 1aau.to/oGL/1AX...
• Safety Glasses 1aau.to/oAs/1AX...
• Floor Jack 1aau.to/oTM/1AX...
• Hammer 1aau.to/oND/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/oqU/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 2nd Generation 2007-2013: • Chevy Silverado 2nd Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
GOTTT DAAMN ITS WAY MORE INVOLVED THAN DISC BRAKES. SHET, I HAVENT DONE DRUMS IN DECADES.
I DONT FEEL LIKE FOCKING WITH IT
😮😢
what size are the jacking bolts please
New wheel cylinder at 9:08, must've missed that part..
Curious… Why bleed the brakes if you’re not opening the system if there’s air in the system, there’s something else wrong. You shouldn’t really ever have to bleed the brakes if you’re not opening it.?
Your camera guy did very well and your mechanic.
Giving everything a nice coating of brake fluid. Crazy how mechanics treat these vehicles. I'm probably less typical trying to keep things clean and protected w coatings as intended. Wonder why things don't last.
What size bolts did you use to back off the drum ? & if the brakes I bought didn’t come with hardware is it fine to reuse the old stuff ?
Great video, I was a little nervous about taking the plate that connects to the parking break line off but I see now that the old one can be reused. Thanks.
My adjuster is at its shortest point and I still can’t get the drum on.
Thank you so much I did not know how to put that adjuster in since it was missing from my truck
I seen one video they had the long spring u release at the bottom from the parking brake
Where you get the tool
What size are the bolts ?
I been looking for a backing plate & can not find one any where , any ideas ?
Do those access covers in your 4:04 in your video come with brake pads ?
I used m10 bolts on mine to get the cover off
Do access covers in your 4:08 part of your video come with brake pads or rotor ?
What are those access covers do ? What is there purpose?
What about the parking brake for the 2097 Chevrolet Silverado 1500 LS
yo cuz- dont you read the comments? WHAT SIZE BOLTS???