Just want to say hands down your videos are the best. I feel like im with my buddies working on stuff. I been having issues with a damn txt series 36 volt and followed your diag videos. Just narrowed it down to this switch(hopefully). Keep posting these videos they really do help. Oh and also we need to do a go fund me for you to get a magnetic volt meter haha. Them things NEVER want to stay where you set them.
The magnetic volt meter. Somebody’s needs to patent that. lol. Go fund me sounds good. Lmao. Nah joking. But appreciate the words. What’s your cart doing. Also what voltage did you get on the its. Hit that like and subscribe button for me.
I brunt the reed wire , [& it brunt control wires up i brought a new one & insalled it , but now othing serms too work, dis i do away wirh every thing like its throttle
@@reubenwilson7312 or if you don’t want to give me your email post pictures on your you tube page and I will see what you have going on. Or just post a video on your page
@@muasirlagunas2430 yes sir thanks for watching man. I appreciate it. Thanks for describing also. I post a video every Monday night and every Saturday night of every week if you ever need me to post a video of anything, just send me a description of what kind of beer do you want and I’ll make it for you
It is a 2015 txt 51 volts at battery, switch, solenoid and controller. Replaced ITS, solenoid, micro switch and controller. Controller has 51 volts on B+ 0 volts on B- No voltage drop on M- when pedal is pushed. Solenoid clicks but no movement
I have a Zone cart and I have a problem with the acceleration pedal not working but when I lift up the rubber matte, I have not lid to open to get to this box. So I assume I have to get to it from underneath?
Question for you for a ezgo TXT 1995. or cart died all of a sudden from while we were using it after coming to a stop. I changed the solenoid the key switch the it’s pedal sensor and the switch as well I’ve I’ve watched the video. All the numbers match for the parts that I’ve changed out with the multimeter that match with yours. The only issue that I have is with the white wire when I test the white wire hooked up to the sensor and depress the gas pedal I’m reading 0.03. I ordered two of the sensors And this is the second one. Is this a bad sensor or is there something else that may be causing that not to be reading correctly. This has an alltrax controller in it
@@Golfcartwhispererok so on controller 0 from white white and 0 from black wire. Time for a new controller? If so what do you recommend? Unless you thinking something else.😂
Great video! I have a 95' EzGo Medalist 36v. My issue is that the cart goes in reverse with no problem, but it goes in forward sometimes and sometimes it will not go forward. I move the forward/reverse switch back and forth and sometimes it will go forward. Any advice? Not sure what to check. The fact that it will go into forward sometimes and sometimes not, has me baffled.
@@michaelstephenson8009 I am going to sen you a video to watch. Test like the video and let me know if have any questions. But the only thing that controls forward and reverse is the f n r board.
I am reading 14 volts continuously on the white wire going to the ITS However I am not getting any voltage on the black wire going to the ITS. I’m not sure if it’s a wiring issue something else?
I have an 2003 Ezgo TXT electric PDS, 36 volt with lithium battery. It has started to stop after letting my foot off the pedal. I have to turn off the key switch and turn it back on while completely stopped and it will go again. I have changed the FR switch, key switch, solenoid, diode, 250 ohm resistor, ITS and foot pedal micro switch. I think the foot switch needs to be adjusted because it jumps when starting. I have a new controller in the box if that is the problem. What do you think?
We have the Eco Battery. It does it all the time but a few weeks ago after an extended ride, didn't do it. Mostly, it's all the time though even when not on a full charge. It does not seem to be heat related because it starts doing it immediately.
Working on a 36v 96 txt. Worked fine till nothing. No clicking at solenoid. Bypassed reed switch, new solenoid, battery bank, and batteries test good. Any suggestions where yo look would be greatly appreciated. Thank you
My black and white wire from the its connector has no voltage. Key on or off. But everything else does according to your vids. Could this be controller?
@@joeyhalleck5628 yes if you have no voltage coming out the controller. Going to the its. Replace Controller as long as all voltages check like in the video above. I have over 200 videos on my channel I have some that tell you how to test the controller. Watch them if in doubt. What type of cart is it. Ezgo pds or series
@@joeyhalleck5628watch this video here and tell me what voltage your missing. If any questions let me know. EZGO GOLF CART WONT MOVE. TROUBLESHOOT WHOLE CART!! ruclips.net/video/lD2Z8SECq5U/видео.html
I am working on a 36 TXT PDS at the moment. I can can make the solenoid hit when you jump it with pack voltage. The reed switch is bypassed for the Summit onboard charger but I have pack votage at the harness. All of the micro switches function but I am only getting 6v when it gets back to the F/R rocker, key switch, and foot switch. The cart has a DCX400 controller on it. Could there be something burnt in the controller after the reed switch?
@@KyleWhite-b6l also what does voltage show on all 4 post on the tow switch. Black lead on main negative and red lead on tow switch wires one at a time. Leave the black lead on main negative. During the test. And just move the red lead from wire to wire
@@KyleWhite-b6l my I just read what you said again and you said you can make the sol click when you give it pack voltage. Does it run when you give it pack bolatge
@@KyleWhite-b6l sound like to me either you have low voltage going in. Or the controller is only putting out 6 volt. Which I’ve never seen before but I know how that goes.
If it’s a pds Ezgo and the sol clicks and stays engaged till you let go of gas. Check motor. If it’s a series cart and you replaced controller and the f n r looks good check motor.
@HeyHeyHey97 getting just under 7volts on white and black at controller zero to 100% throttle no matter where at, once solenoid closes completing circuit
@@reubenwilson7312 put volt meter on dc voltage 200. Black lead on May negative red lead on the green and red wire You should get battery voltage on your black-and-white. You should get 14 bolts on one and full pedal 1.5 to 3 V DC depending what type of Ezgo it is.
Thanks for watching and commenting. On my channel I have different levels of member perks. If you want you can take a look at them. And see which one suits you.
Just want to say hands down your videos are the best. I feel like im with my buddies working on stuff. I been having issues with a damn txt series 36 volt and followed your diag videos. Just narrowed it down to this switch(hopefully). Keep posting these videos they really do help. Oh and also we need to do a go fund me for you to get a magnetic volt meter haha. Them things NEVER want to stay where you set them.
The magnetic volt meter. Somebody’s needs to patent that. lol. Go fund me sounds good. Lmao. Nah joking. But appreciate the words. What’s your cart doing. Also what voltage did you get on the its. Hit that like and subscribe button for me.
I brunt the reed wire , [& it brunt control wires up i brought a new one & insalled it , but now othing serms too work, dis i do away wirh every thing like its throttle
Had to replace a wire too motor & most likly , didnt mark nothing but got them wrong any thing you do will help me for sure
@@reubenwilson7312 if you have an email let me get it so I can reach out that way. You have too much going on to text on you tube
@@reubenwilson7312 or if you don’t want to give me your email post pictures on your you tube page and I will see what you have going on. Or just post a video on your page
Ive been watching a bunch of videos these are great honestly thank you man just subscribed!
@@muasirlagunas2430 yes sir thanks for watching man. I appreciate it. Thanks for describing also. I post a video every Monday night and every Saturday night of every week if you ever need me to post a video of anything, just send me a description of what kind of beer do you want and I’ll make it for you
It is a 2015 txt
51 volts at battery, switch, solenoid and controller. Replaced ITS, solenoid, micro switch and controller. Controller has 51 volts on B+
0 volts on B-
No voltage drop on M- when pedal is pushed.
Solenoid clicks but no movement
You have 0 volts on b-? How are you measuring that. Put black lead on b-and red lead on b+ on controller and hit gas and tell me what you get
Watch this video. I have part 2 also
Ezgo golf cart 48 volt troubleshooting PART 1
ruclips.net/video/5acAHCKcr0I/видео.html
I have a Zone cart and I have a problem with the acceleration pedal not working but when I lift up the rubber matte, I have not lid to open to get to this box. So I assume I have to get to it from underneath?
@@DmbDaleJr yes you have to get it underneath and there’s nothing in there that you can do. It’s all sealed meaning you can’t change no components.
@ so the cart is trash now?
@@DmbDaleJr yes you have to get to it from underneath, but there’s nothing in there that you can’t replace all you can do is check voltage ohms
@ what do you mean, you have a problem with the accelerator pedal? What’s the car doing?
@@Golfcartwhisperer it was working fine today and then all of a sudden, it won’t move ….full charge….wont go in reverse or forward.
Question for you for a ezgo TXT 1995. or cart died all of a sudden from while we were using it after coming to a stop. I changed the solenoid the key switch the it’s pedal sensor and the switch as well I’ve I’ve watched the video. All the numbers match for the parts that I’ve changed out with the multimeter that match with yours. The only issue that I have is with the white wire when I test the white wire hooked up to the sensor and depress the gas pedal I’m reading 0.03. I ordered two of the sensors And this is the second one. Is this a bad sensor or is there something else that may be causing that not to be reading correctly. This has an alltrax controller in it
@@jasonreid1776 have you watched my other video on About troubleshooting the whole cart
I have watch that one as well. Not the best at this.
I’m gonna go thru that one and I’ll message with findings
@ and we’ll get it going. That’s what this channel is for to teach
@@Golfcartwhispererok so on controller 0 from white white and 0 from black wire. Time for a new controller? If so what do you recommend? Unless you thinking something else.😂
Great video! I have a 95' EzGo Medalist 36v. My issue is that the cart goes in reverse with no problem, but it goes in forward sometimes and sometimes it will not go forward. I move the forward/reverse switch back and forth and sometimes it will go forward. Any advice? Not sure what to check. The fact that it will go into forward sometimes and sometimes not, has me baffled.
@@michaelstephenson8009 I am going to sen you a video to watch. Test like the video and let me know if have any questions. But the only thing that controls forward and reverse is the f n r board.
@@michaelstephenson8009 ruclips.net/video/AJMxTTlW0QY/видео.htmlsi=qjwZTAGfgcV1szuM
@@Golfcartwhisperer Thank you very much!
@@Golfcartwhisperer Okay, I'll check this out. I will let you know that this morning, after charging the cart over night, it went into forward. crazy
@@Golfcartwhisperer Can you tell me where the f n r board is located on my cart?
I am reading 14 volts continuously on the white wire going to the ITS However I am not getting any voltage on the black wire going to the ITS. I’m not sure if it’s a wiring issue something else?
@@dougmcilvenny9875 what kind of Ezgo do you have a pds?
I have an 2003 Ezgo TXT electric PDS, 36 volt with lithium battery. It has started to stop after letting my foot off the pedal. I have to turn off the key switch and turn it back on while completely stopped and it will go again. I have changed the FR switch, key switch, solenoid, diode, 250 ohm resistor, ITS and foot pedal micro switch. I think the foot switch needs to be adjusted because it jumps when starting. I have a new controller in the box if that is the problem. What do you think?
@@gregoryjenkins5682 does it do all the time or just right off charge. Also what type of battery
We have the Eco Battery. It does it all the time but a few weeks ago after an extended ride, didn't do it. Mostly, it's all the time though even when not on a full charge. It does not seem to be heat related because it starts doing it immediately.
@ does the car beep when it quits also, are you driving at half speed a lot?
@@gregoryjenkins5682 also how long ago has lithium battery been in?
@ does the battery gauge shut off
Working on a 36v 96 txt. Worked fine till nothing. No clicking at solenoid. Bypassed reed switch, new solenoid, battery bank, and batteries test good. Any suggestions where yo look would be greatly appreciated. Thank you
@@chadsmith1092 I am going to share a link with you
@@chadsmith1092 ruclips.net/video/P0luR97tDa8/видео.htmlsi=N8NPY3gkUVDjMw5q
@@chadsmith1092 watch this. Keep and let me know what you find out. Or if you don’t understand let me know and I’ll help
@@chadsmith1092 ruclips.net/video/d5KReDFc2K4/видео.htmlsi=pg6odNiAh9z4JThQ
@@chadsmith1092 watch these videos both of them are about the same carr
My black and white wire from the its connector has no voltage. Key on or off. But everything else does according to your vids. Could this be controller?
@@joeyhalleck5628 yes if you have no voltage coming out the controller. Going to the its. Replace Controller as long as all voltages check like in the video above. I have over 200 videos on my channel I have some that tell you how to test the controller. Watch them if in doubt. What type of cart is it. Ezgo pds or series
@@Golfcartwhisperer ezgo txt pds 2010
@@joeyhalleck5628watch this video here and tell me what voltage your missing. If any questions let me know. EZGO GOLF CART WONT MOVE. TROUBLESHOOT WHOLE CART!!
ruclips.net/video/lD2Z8SECq5U/видео.html
I am working on a 36 TXT PDS at the moment. I can can make the solenoid hit when you jump it with pack voltage. The reed switch is bypassed for the Summit onboard charger but I have pack votage at the harness. All of the micro switches function but I am only getting 6v when it gets back to the F/R rocker, key switch, and foot switch. The cart has a DCX400 controller on it. Could there be something burnt in the controller after the reed switch?
@@KyleWhite-b6l run you a jumper wire from main positive to the small post on sol yellow wire and see if runs
@@KyleWhite-b6l also what does voltage show on all 4 post on the tow switch. Black lead on main negative and red lead on tow switch wires one at a time. Leave the black lead on main negative. During the test. And just move the red lead from wire to wire
@@KyleWhite-b6l my I just read what you said again and you said you can make the sol click when you give it pack voltage. Does it run when you give it pack bolatge
@@KyleWhite-b6l sound like to me either you have low voltage going in. Or the controller is only putting out 6 volt. Which I’ve never seen before but I know how that goes.
Need Help today put control wires on nothing happing
If the white wire going to the ITS shows 14 volts and the blank side shows the same, is that a problem?
Replace the its
I replaced the ITS, controller, solenoid, and batteries. The key switch checks out. Solenoid clicks, but cart won’t run. Any thoughts?
@@danielscott8934 what does voltage check on everything
What type of cart is it. Meaning a pds or series
If it’s a pds Ezgo and the sol clicks and stays engaged till you let go of gas. Check motor. If it’s a series cart and you replaced controller and the f n r looks good check motor.
Hey hey hey! Great stuff buddy! This is awesome content as always! Sorry I’ve been gone for a minute.
Welcome back! I figured you’re tired and were in the Bahamas
Welcome back! I’m just tying to make a living.
@@Golfcartwhisperer 😂🤣
Well at least pay the water bill
Where does the green and the red wire from the micro connect to?
An A#$ pulled my wires lose!
The controller harness
And what would that look like. It's a Robinson engine.
And I can't figure out where this red or green wire connects to!
@@bernardjohnson1208 oh you have a gas car. Your green connects to the keyswitch and your red comes off the solenoid
Working on same exact cart in this video, Getting 6 volts at white wire 14 and some change at black. You said should only get 1.5 on white
That’s correct replace its or check for water in box. Thanks for telling me what kind of car you have
I would first take the floor board up and look to make sure no water. Then if there’s is. Replace the its.
@HeyHeyHey97 no water no cracks at its bossman
@HeyHeyHey97 getting just under 7volts on white and black at controller zero to 100% throttle no matter where at, once solenoid closes completing circuit
@@Aj-wb5rg so on the black wire, you have 14 V and on the white wire is a voltage you said above, correct
Need help reed wire brunted, now what to do
@@reubenwilson7312 I replied to your messages and replied on your page did you get my stuff I sent you
Where is that switch located??
@@josephsam2776 under the floormat
Howcyou che c k witg a meter what voltagw should you get
@@reubenwilson7312 put volt meter on dc voltage 200. Black lead on May negative red lead on the green and red wire
You should get battery voltage on your black-and-white. You should get 14 bolts on one and full pedal 1.5 to 3 V DC depending what type of Ezgo it is.
How you jump reed wire
@@reubenwilson7312 I replied in your page and as well as my other videos you. Commented in did you get that number
Thanks. I’ll try that next.
k let me know
Johnny Sins works on golf carts ?!
7 days a week
Very helpful, I'll check mine tomorrow. I need your help please. Maybe I could get your number. Thank you for everything you do, Mike
Thanks for watching and commenting. On my channel I have different levels of member perks. If you want you can take a look at them. And see which one suits you.
For one on one phone help. You must be a member of my page.
@@Golfcartwhisperer how do I do that I already subscribed
@michaelvogel5300 wen yo go to my main page it will say member. And just click on it.
@@Golfcartwhisperer ok will do