Motor grader CAT 24 M manuver

Поделиться
HTML-код
  • Опубликовано: 31 дек 2024

Комментарии • 171

  • @jumadichurchill136
    @jumadichurchill136 4 года назад

    Cantik bang Rifai manuver motorgreder cat24 m,nya nyimak aja bang top bgt👍👍

  • @akiceman25
    @akiceman25 4 года назад +9

    When he's completing a pass he should lift his toe prior to starting his turn. This would allow the material to flow off the heel and deposit it in the windrow without curving it at the end. Benefits of this include allowing traffic to flow uninterrupted, no need to drive over top windrow, and easier to get back on the windrow on the next pass. Many years in the 16m, h & g, but would love to try out the 24m!

    • @RIFAIMining
      @RIFAIMining  4 года назад +4

      thank you for taking the time to view my video

    • @t-dog8528
      @t-dog8528 4 года назад +2

      alternatively run the tail all the way to the side and still cross winrow on inside front, it's only a haul road and on last pass run that baby out from patch up area half square on so it can be bought across patch next full cut

  • @lcsugiono6274
    @lcsugiono6274 3 года назад +1

    Ini adalah teknik/metode manuver dalam maintenance jalan yang benar,Blade selalu tepat diletakkan pada windrow (gundukan2 material yang memanjang yang dihasilkan ooleh alat2 gali),dan arah manuver juga benar dalam mengkombinasikan learning wheel(memiringkan roda) dan articulation serta merubah sudut porpulsion Blade (besar sudut Blade terhadap center line /garis tengah frame (rangka) 👍👍👍

    • @ianyan2664
      @ianyan2664 10 месяцев назад

      Bang belajar dimana bang apa ada bukunya

  • @paulpeters5199
    @paulpeters5199 5 лет назад +2

    Very good operator to run a grader non stop and maneuver it hats off to you

  • @jerukwudelchannel
    @jerukwudelchannel 4 года назад +1

    Mntap...operatornya hebat...slm pemula

  • @mangilberau9315
    @mangilberau9315 3 года назад +1

    Subhanallah berkahnya
    Semoga sehat selalu dan bahagia ❤️

  • @kelvinbaihaqi9929
    @kelvinbaihaqi9929 4 года назад +3

    Bersyukur dan beruntung bgt dilatih sama beliau🙏

  • @Malikberau
    @Malikberau 4 года назад +1

    Hdir bang rifai,pemula yg sdah sukses

  • @lbbradley55
    @lbbradley55 5 лет назад +8

    First time I have seen the Articulate in the middle. Frame ! Very efficient turns. My Father was a Equipment operator during the Korean War. Army Corps of Engineering. He ran Cat Graders Pans and D-7 & the first D-8 Cat Dozer that were sent became His Machine. !
    Just Lost Him. 11/23/19
    Sure Miss You Dad...

    • @ockeyboys4579
      @ockeyboys4579 4 года назад

      Sorry to hear about your father. The newer ones do actually articulate and makes it so much easier aswell.

    • @lbbradley55
      @lbbradley55 4 года назад

      Ockey Boys
      Thank you
      Yeah they are interesting.
      That's a BIG GRADER
      Dad was very proud that first D-8 CAT they sent them became his machine. I have a few photos of him with it.
      They all had cable lift and clutch and break to steer them. ( Clutch pedal and lever break ) L R
      No Hydrologic nothing. They also had a 1 HP Brigs & Stratton pony start engine they had to crank up to start the Cats.
      I still find videos of them.

  • @sulyadiwardi6667
    @sulyadiwardi6667 3 года назад +1

    Mantap bosku semangat semoga sukses selalu🙏🙏🤝🤝👍👍

  • @oliverwabwire2836
    @oliverwabwire2836 6 лет назад +3

    A monster grader, in highly capable hands ...such a joy to watch!

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      Oliver Wabwire thank's Mr oliver

  • @ifbiconfishingboy2477
    @ifbiconfishingboy2477 4 года назад

    Selamat berkarya terus mantap vidionya good👌🏻 saodara lama nyimak kembali😎
    Sadara baru ayo merapat kita ngopi

  • @jimmyhalfranto5431
    @jimmyhalfranto5431 4 года назад +1

    Mantap bos,,salam dari jambi

  • @alifchannelvlog4724
    @alifchannelvlog4724 4 года назад +1

    Selalu safety dalam bekerja ya bosku. Salam sukses dan membawa berkah bosku. Mampir great kn jalan saya ya bos ku

  • @richardsampson4446
    @richardsampson4446 5 лет назад +2

    Really productive and efficient. Sometimes you need to be able to get the job done quickly. Good skills.

    • @RIFAIMining
      @RIFAIMining  4 года назад

      Thank you for taking the time to view my video 🙏🙏🙏

  • @DickiHandayuda
    @DickiHandayuda 4 года назад

    Keren lanjut kan kawan biar semangat saya bawa kan kopi hitam yah biar tmbah semangat terus👈👍🙏

  • @benthompson809
    @benthompson809 3 года назад +3

    In civil we would call this a “cut/fill transition”. In mining we call it a road, “more delays more pays”
    I would suggest a “square box out 📦”_cut, followed bye a genuine hard rock base equaled by compaction of the surface layers -2mtres minimum.

  • @nicoredfighterchannel5836
    @nicoredfighterchannel5836 4 года назад +1

    Mau buat apa tu kak, keren alatnya

  • @MrZygy3
    @MrZygy3 9 лет назад +6

    Mantab... Keren Videonya...

    • @RIFAIMining
      @RIFAIMining  9 лет назад +3

      Makasih sudah meluangkan waktu buat melihat video saya......

    • @arturolopez3898
      @arturolopez3898 7 лет назад

      sugiono tc that's what I'm talking about.

    • @RIFAIMining
      @RIFAIMining  7 лет назад

      +Arturo Lopez where is your come from?

  • @tutekohe1361
    @tutekohe1361 6 лет назад +4

    Fast, accurate operation of a big, capable machine.

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      Tu te Kohe thanks Mr Tu te kohe

    • @huvvy
      @huvvy 5 лет назад +1

      Why? Cause he learned how to turn around and roll a windrow on a haul road

  • @JMRanchMontana
    @JMRanchMontana 5 лет назад +9

    He’s a smooth operator!!!

    • @RIFAIMining
      @RIFAIMining  5 лет назад +2

      Thanks mr.curt schnitzer

    • @t-dog8528
      @t-dog8528 4 года назад

      what? you didn't see the bouncing

  • @PhyroMcBruceEsq
    @PhyroMcBruceEsq Год назад +1

    What do we reckon, 3rd gear?

  • @4saudaratv371
    @4saudaratv371 4 года назад +2

    Keren mobil alat berat nya, 👍👍

  • @agustini8604
    @agustini8604 4 года назад +1

    Kereeen pak sugi

  • @arshadmahmood9403
    @arshadmahmood9403 8 лет назад +7

    very nice work style well done

  • @HashimAlhassanyaro-xg8zs
    @HashimAlhassanyaro-xg8zs Год назад

    Hello i like cat grader is good for work

  • @dannymanny6917
    @dannymanny6917 5 лет назад +4

    I run a 160M, love these machines.

  • @enrique599
    @enrique599 7 лет назад +2

    Claro ejemplo de cómo sacar la mayor eficiencia de la máquina, sin duda un gran operador

    • @RIFAIMining
      @RIFAIMining  7 лет назад

      thank's enrique 13,i'm from kalimantan north - indonesian as instructor heavy equipment the coal mining bigges company at kalimantan

  • @Lovelove-je2ji
    @Lovelove-je2ji 6 лет назад +3

    I'm thankful for this video that is imparting knowledge to me and other friends who are interested in gaining useful knowledge.

    • @RIFAIMining
      @RIFAIMining  6 лет назад +1

      คนนี้ที่ใช่ Love love thank you for taking the time to see my video, hopefully useful

    • @Lovelove-je2ji
      @Lovelove-je2ji 6 лет назад

      Dawet Hitam tarakan l like to see you very glad that you convey the knowledge knowledge ... l am in Thailand without a large scale model to see it ... l thank you too. I

    • @lendavidhart9710
      @lendavidhart9710 6 лет назад

      @@RIFAIMining Sug LC, Thank you for posting very nlce video work and grader work, thanks for sharing.

  •  6 лет назад +1

    I was off graders way before the M controls came out, but I'd still dig to have a go of a 24.

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      M-series is a very advanced motor grader

  • @emanoelbenigno3814
    @emanoelbenigno3814 6 лет назад +6

    Muito prazeroso ver esse monstro em ação

  • @sutoyotoyo8761
    @sutoyotoyo8761 4 года назад

    Pokok.y wOw bgt..... Gimana cara mengoprasikan.y???jadi pengen belajar

    • @RIFAIMining
      @RIFAIMining  4 года назад

      Wahhh....yang koment operator senior

  • @nathiolifant6842
    @nathiolifant6842 5 лет назад +4

    Can't believe it's 6:32 am in South Africa, I need to go to work and I'm watching a video of a grader up and down moving the dirt instead.

    • @RIFAIMining
      @RIFAIMining  5 лет назад +1

      thank you for taking the time to view my video

  • @robbiekennedy1029
    @robbiekennedy1029 5 лет назад

    Great bit of driveng........ And good we tip of doin a haul road... Tanks for sharing....

    • @RIFAIMining
      @RIFAIMining  5 лет назад

      Thank you for taking the time to view my video about efective grading motor grader

    • @robbiekennedy1029
      @robbiekennedy1029 5 лет назад

      @@RIFAIMining I am a dozer driver but I b on graders on and off and I think thats a great clip of how to keep grader goin on haul road wit out stoping..... I am lookin forward till My next outting on d grader... Cheers man

    • @RIFAIMining
      @RIFAIMining  5 лет назад +1

      Good,i'm from Indonesian Kalimantan east coal mining,i'm as trainer equipment

  • @Problem_Catur
    @Problem_Catur 4 года назад +1

    Jos Gandos...🙏👍

  • @ririran3027
    @ririran3027 3 года назад

    Semangat terus kawan,, salam kenal

  • @theman338
    @theman338 4 года назад

    War biasa Manuferx..👍👍👍

  • @bangkumisberau2602
    @bangkumisberau2602 4 года назад +2

    24 M 👍👍👍

  • @Donihendra
    @Donihendra 4 года назад +1

    Mantap bos

  • @Lovelove-je2ji
    @Lovelove-je2ji 6 лет назад

    I have never seen this large scale car in Thailand. Thanks to this video clip for people who are interested in the knowledge....Thank you.

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      ผู้ ใช้งาน thank's Mr.after see my the video

    • @Lovelove-je2ji
      @Lovelove-je2ji 6 лет назад

      Dawet Hitam tarakan l thank you too. This video clip to your friends have been watching ... Thank you

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      ผู้ ใช้งาน I made this video in terms of demonstrating the correct and efficient operating techniques so that operational costs can be minimized. This video I want to give to East Kalimantan Indonesia

  • @goollodosaTV
    @goollodosaTV 4 года назад

    Kita adalah teman. Terima kasih😁

  • @sunside79334
    @sunside79334 6 лет назад +2

    skilled driver, nice.

  • @watunesochanel
    @watunesochanel 2 года назад

    Mantap Dan Keren

  • @paochannel6443
    @paochannel6443 4 года назад +1

    Mantap..

  • @Rumahmurahlampung
    @Rumahmurahlampung 4 года назад

    Goodd👍👍👍

  • @_trucktv
    @_trucktv 4 года назад

    Sangat keren,untuk buat jalan.

  • @David-wu7jj
    @David-wu7jj 5 лет назад +1

    Nice operating he's done that once or twice before

    • @RIFAIMining
      @RIFAIMining  5 лет назад

      Thank's mr.david...😀😀😀

  • @rp1645
    @rp1645 4 года назад

    Does anyone know what blade on this grader is equv to in a dozer
    For egs. A D- 4 or 450 just asking if any one know. Thank you

    • @RIFAIMining
      @RIFAIMining  4 года назад

      The blade on this grader measures 7.3 meters in length and approximately 1 meter in height. the equivalent of a dozer can be compared to the size of the blade.

  • @khafidproject9264
    @khafidproject9264 4 года назад

    Mantep bosku..👍

  • @nathanielcatsicas9792
    @nathanielcatsicas9792 4 года назад

    Do you cut, repair and spread or just cut to one side?

    • @RIFAIMining
      @RIFAIMining  4 года назад +2

      I only demonstrated how the technique of absorption is effective

  • @nasrin035
    @nasrin035 4 года назад

    Mantap, kawan baru nyimak 🙏mampir kang

  • @johnm.evangelis693
    @johnm.evangelis693 7 лет назад +1

    Great job!!!

    • @RIFAIMining
      @RIFAIMining  7 лет назад

      thank's mr.jhon M evangelis,I do this to give an example of how to combine leaning wheel anda articulated and moldboard correctly when manuvering in order to produce the effectivitness of motor grader 24M

  • @samg8572
    @samg8572 8 лет назад +3

    Good to see a grader operator who can keep the machine moving constantly. Two-bit wannabes you see everywhere with 'years' of experience who have to stop the machine to set the blade before each run and still dig the toe in the whole way 😡😡

    • @RIFAIMining
      @RIFAIMining  8 лет назад +4

      As a trainer motor grader i tried to do job well and profesionally so as to be used as a reference an usefull for other,thank for your comment....

    • @RIFAIMining
      @RIFAIMining  7 лет назад

      Sam Grimshaw thank's guys for taking the time to see my video

    • @Grabatire
      @Grabatire 7 лет назад

      Not every job site that provides that opportunity, space-wise, but nice to watch an operator who can take advantage of the machines capabilities.

    • @rossgray3070
      @rossgray3070 6 лет назад +5

      Go and do some final trim along side kerb and get it ready for asphalt with a couple of culled sacs and intersections in it, I can tell you it don't happen like that video, not when you are trimming to 5 mm.

    • @RyTrapp0
      @RyTrapp0 5 лет назад

      @@rossgray3070 At the end of the day, all that matters is the quality of the finished work and how quickly it can be done - style points don't end up on your pay check, that's a fact
      not taking anything away from this operator of course

  • @liesbennoui965
    @liesbennoui965 2 года назад

    🤔Strasbourg ✋

  • @اسامةالتاجر
    @اسامةالتاجر 5 лет назад

    this is beautiful

  • @Denfastories
    @Denfastories 4 года назад

    Itu mau di buat ap to mas kok di ratakan??

  • @juprinizam1245
    @juprinizam1245 4 года назад

    Wow.... bagus ini klau mau di pakai usir orang demo yg anarkis 😅😅😅

  • @NeoclassicalRadagast
    @NeoclassicalRadagast 5 лет назад +1

    He's good, good operator, but personally on that last pass I would have turned out to my right and come back straight at the windrow.

    • @RIFAIMining
      @RIFAIMining  5 лет назад +1

      Thank's Mr,Nicolas

    • @huvvy
      @huvvy 5 лет назад +2

      Yeah wow he can turn it around and roll a windrow, dont have to be a skilled operator to do that

  • @wasjoko5475
    @wasjoko5475 4 года назад

    Buat jalan tol lur..??

  • @اسامةالتاجر
    @اسامةالتاجر 5 лет назад

    Hello, are you America or Canada?

  • @BangTurOfficial
    @BangTurOfficial 4 года назад

    Josssss...

  • @ZingaraJoe
    @ZingaraJoe 7 лет назад

    A Williamson turn on a motor grader, well done.

    • @RIFAIMining
      @RIFAIMining  7 лет назад

      Zingara Joe thank's mr.zingara joe

  • @Thevacomaticvacuumcorner
    @Thevacomaticvacuumcorner 6 лет назад

    a U turn whit a grader nice job sir

    • @RIFAIMining
      @RIFAIMining  6 лет назад +1

      Antoinecorner thanks Mr.antoinecorner

  • @NurAini-ek9qk
    @NurAini-ek9qk 4 года назад

    Mantap I like

  • @adaffalahardhana8686
    @adaffalahardhana8686 5 лет назад

    Andai kalo aku bisa kerja ditambang 😃kalo dikebun medannya sulit2 😂

    • @RIFAIMining
      @RIFAIMining  5 лет назад

      Semua bisa kerja ditambang...semua area kerja sama resiko dan bahayanya, yang terpenting adalah bagaimana bekerja dengan aman pada area high risk

    • @adaffalahardhana8686
      @adaffalahardhana8686 5 лет назад

      Mantap Jiwa, Doain aku ya pak semoga kapan hari bisa kerja di tambang 😁😁😁

    • @RIFAIMining
      @RIFAIMining  5 лет назад

      Aaminn...

  • @อาคมมากบุญ-ภ7ฐ
    @อาคมมากบุญ-ภ7ฐ 4 года назад +1

    กรีดทางลงให้เพราะไหร

  • @البساطةمعسعيدةوفاتي

    جميييييل

  • @Malikberau
    @Malikberau 4 года назад +1

    24 m lati kayak nya

  • @street2955
    @street2955 4 года назад

    Mantap

  • @piralcedunia3018
    @piralcedunia3018 4 года назад

    Smagat

  • @tippmannallstar
    @tippmannallstar 7 лет назад

    A god among men

    • @RIFAIMining
      @RIFAIMining  7 лет назад

      halo...tippmannallstar,where do you come from?

    • @tippmannallstar
      @tippmannallstar 7 лет назад

      sugiono tc Alberta, Canada

    • @RIFAIMining
      @RIFAIMining  7 лет назад +2

      +tippmannallstar i'm for kalimantan north Island, indonesian

    • @richardpantin1108
      @richardpantin1108 6 лет назад

      How many years of experience do you have operating Grader?

  • @Vanhoyer
    @Vanhoyer 8 лет назад

    Mau nanya ni pak...?
    Ini dimana project nya pak...?
    Pengen belajar ni pak mengendari motor gradernya pake joys stick ya pak..?

    • @RIFAIMining
      @RIFAIMining  8 лет назад

      Ini saya buat diberau kalimantan timur khususnya Buma-Lati waktu saya mendemonstrasikan teknik manuver yang efesien dengan menggunakan motor grader M-series,video ini untuk siswa2 saya yang harapan nya temen2 operator dapat mengaplikasikannya dengan baik dan benar2 efesiensi saat mengoperasikan motor grader

  • @samsidarhamdan510
    @samsidarhamdan510 4 года назад

    Mantaaap

  • @alimuhammad35
    @alimuhammad35 6 лет назад

    RAPI...How long you have been operating grader Pak?
    Gk minat adu Nasib d rantau kami Pak? Hehe..
    Salam dr Melbourne Australia 🙏

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      Muhammad Ali ini video waktu saya mencontohkan teknik grading dan manuver dengan menggunakan Caterpillar M-series,ini sebagai alat peraga untuk para operator untuk penyegaran tentang teknik operasi yang benar dan efisien,saya sangat berminat sekali untuk melihat temen2 yang ada diluar Indonesia sebagai ajang silahturahmi dan sharing tentang teknik operasi yang baik

    • @alimuhammad35
      @alimuhammad35 6 лет назад

      Dawet Hitam tarakan
      Oh begitu, klo Sy operator Excavator Pak... Bisa dong bagi2 ilmu nya grader pak, sbb Sya Penge dkemudian hari bisa jd operator grader juga.
      Klo Disini udah mulai bnyk yg pakai 'Trimble Grade control' or GPS sedikit diManja.

    • @RIFAIMining
      @RIFAIMining  6 лет назад

      Muhammad Ali boleh,ini wa saya 082218451797,saya juga sambil belajar terus mencari ilmu yang baik

    • @masmaskuri4973
      @masmaskuri4973 5 лет назад

      Very nice... Pak tlg bagi video tutorial P2H GREDER 24M dari bawah sampai masuk kabin

    • @RIFAIMining
      @RIFAIMining  5 лет назад

      @@masmaskuri4973 untuk p2h,dasar tahapannya cuman ada 4:
      1.pemeriksaan mengelilingi unit
      2.pemeriksaan sebelum engine hidup
      3.pemeriksaan setelah engine hidup
      4.pemeriksaan setelah beroperasi
      Untuk masing2 unit pastinya berbeda2 bagian yang dichek

  • @gradercutter9073
    @gradercutter9073 6 лет назад

    im a Grader operater.but want to operate like that. nooo reavers

    • @RIFAIMining
      @RIFAIMining  6 лет назад +1

      Grader Cutter this technique is actually easy to use only a combination of very precision

  • @RIFAIMining
    @RIFAIMining  8 лет назад

    Thank's arsyad mahmood....

    • @atiladorsay3478
      @atiladorsay3478 4 года назад

      Sugiono LC hi is he doing laser levellin?

  • @autotronicarb3809
    @autotronicarb3809 7 лет назад

    Las llantas delanteras están invertidas en la dirección de giro los tacones de las huellas de las llantas tienen el sentido invertido, eso provoca una trepidación en toda la máquina.

    • @albertogarcia5276
      @albertogarcia5276 5 лет назад

      Imagino que te referiras a que los neumaticos delanteros estan montados al reves. No se que significa trepidacion pero en una maquina sin traccion delantera que esten montados al reves poco importa

    • @opieteller5952
      @opieteller5952 5 лет назад +1

      Se montan al revés para q tengan más tracción, en todas las motos q e traído están así por q da mejor funcionamiento

    • @joseferreyra3231
      @joseferreyra3231 5 лет назад

      @@opieteller5952 es verdad afirma mas la máquina

  • @joshedwards2535
    @joshedwards2535 5 лет назад

    Definitely not the operators first day.

    • @RIFAIMining
      @RIFAIMining  5 лет назад

      thank you for taking the time to view a video of the operation of the Caterpillar 24 M motor grader

    • @xreconusmc3156
      @xreconusmc3156 4 года назад

      Josh Edwards nah about 32 plus years of service

  • @6gunronnie834
    @6gunronnie834 2 года назад +1

    Novice.

  • @دموعلعين-ذ7غ
    @دموعلعين-ذ7غ 6 лет назад

    شكرأ

  • @TheDew1983
    @TheDew1983 4 года назад +1

    Must be a new operator, they gouge their heel or toe on almost every turn cutting a ditch lmfao

    • @RIFAIMining
      @RIFAIMining  4 года назад +1

      thank you for taking the time to view my video

  • @Bagheli811
    @Bagheli811 6 лет назад

    nice

  • @husnithamrin541
    @husnithamrin541 2 года назад

    No way

  • @allstar1805
    @allstar1805 4 года назад

    #SALAM KENAL
    GOTONG ROYONG YUK.

  • @Jjason601
    @Jjason601 7 лет назад

    Not bad

  • @narsingh8578
    @narsingh8578 5 лет назад +1

    अरे भाई साहब इस ग्रेटर से डंपिंग तोड़ती दिखाओ

  • @danielgarces4929
    @danielgarces4929 7 лет назад

    queloco Qoooooo

  • @اسامةالتاجر
    @اسامةالتاجر 5 лет назад

    Nice, I am from Algeria. Please contact us soon

  • @aruechanel2906
    @aruechanel2906 2 года назад

    Mantap