Oil Pump install on a type 1 vw engine on Grease Pit
HTML-код
- Опубликовано: 7 сен 2024
- I am getting close to finishing up Grease Pit and and today I install the CB oil pump.
CB Performance oil pumps
Maxi 30 Full Flow Oil Pump
www.cbperforma....
Oil Pump porting
• How I port an Air-cool...
You could loosen off the case bolts to install the oil pump easier.
All the best👍🏾🇬🇧🛠
Good stuff! Wish I would have done my own. I had uy who installed new pistons do it, and it leaks like crazy here! So irritating paying to have someone do it wrong at an actual shop. Guy also bent cooking find on heads by whacking them with a mullet to get off. Nice car love to see more of it.
@@ahernandez9860 I will admit it, sometimes those heads will be stuck on the cylinders. Especially if they have been on there awhile. 043 castings are the worst for some reason. 🤠😎
Just what I was looking for. Thanks for the help!
I install the pump housing into the left side of the case using two bolts while the case is split, then when I close things up its already in place and aligned without having to press it in.
Nice informative Video! Keep up the series, looking forward to hearing it run!
Along for the ride...👍🏴
extremely great presentation, I wish you lived next door.
My 74 engine had a semi auto stick hooked up to it before. I have to change the pump it’s weird looking. I need to see which one I need. Great Video!
It will most likely depend on what cam you're engine has in it. Early and aftermarket cams have a flat cam gear as to later engines which have a dished cam gear. I think 71 and later engines had the dished cam gear.
For a stock 1969 converted to the doghouse and 1600 dual-port, what is the best oil pump/oil pump size for my single relief case with stock crank, heads, rockers, cam, compression, and distributor?
I like using a 26mm pump.
I just watched your video and I got a question on your oil pump is that a remote pump where you'll have your oil filter set someplace else
Yes, I always run a full flow oil filter set up. Thanks for watching.
wouldn't vasoline be a better choice to prime the pump?
I've always used grease, I have heard of people using pre-lube.
Do you have a complete series of this whole build on this motor if you do let me know
I believe it's the build I named Grease Pit
Great vid! Did that kit come with the pump cover gasket? ...I just bought one, but the website didn't specify.
Yes it did, thanks
Do you have to plug the case with the CB pump? I didn’t think you had to, but would like to know for sure.
I always plug the case.