Thanks for this video! The 13’ LX model was little different that there were only 4 tabs in wheel well and a bolt underneath the edge of the door and also a tab beside it. The tools helped a lot. The tabs in wheel well was a real pain to remove.
Does anyone know what the part is called that is between the fender and the door? The plastic ones and you have to push on it to release the fender from the clips?
watching the bumper cover removal and the headlight - do you actually have to remove them both? Seems like if you remove the vertical phillips head screw, and a few of the pins on the underside of the vehicle (under the bumper cover), then you can access that 10mm bolt that secures the headlight to the fender. If you remove that, and then do everything else you show for the fender, will that allow the fender to come off, or do you still have to remove the light, and thereby the bumper cover?
just did that yesterday. yes it is possible to reach the 10mm bolt without taking off the entire bumper and headlight. there are actually two 10mm needs to be removed, one attaching the headlight to the fender, one attaching the fender to the frame. it was pretty awkward to access the two bolts with the bumper on. if I would do it again, I would remove the bumper first. no need to remove the headlight for sure
The first half of the video you spent explaining plastic push clips, great job.
I definitely appreciate the video champ. I will be trying to do this today. Praying I can do it lol
Great video!!!
Quick question do you.know if the outter roof panel can be removed for thos same car?
Thanks for this video! The 13’ LX model was little different that there were only 4 tabs in wheel well and a bolt underneath the edge of the door and also a tab beside it. The tools helped a lot. The tabs in wheel well was a real pain to remove.
I would imagine they're a bit different because 2013 is the next gen 😅 Glad it worked though
What are the tiny black screw/pins that are also there, I can't figure out how to remove them
Hello, can you name the clips that are on the lower part of the wheel fender liner
Does this car have a sunroof? Trying to locate where the drain tubes exit on a similar car.
Do I have to take it all apart or can I just find something to pop it out. With
Does anyone know what the part is called that is between the fender and the door? The plastic ones and you have to push on it to release the fender from the clips?
www.google.com/search?q=2008+accord+fender+close+out&ie=UTF-8&oe=UTF-8&hl=en-us&client=safari#ip=1&oshop=apv&oshopproduct=cid:16176245667289395066,oid:9752065862956023585,iid:10089024020932206480,pvt:hg&piu=ps:28&pvs=0
watching the bumper cover removal and the headlight - do you actually have to remove them both? Seems like if you remove the vertical phillips head screw, and a few of the pins on the underside of the vehicle (under the bumper cover), then you can access that 10mm bolt that secures the headlight to the fender. If you remove that, and then do everything else you show for the fender, will that allow the fender to come off, or do you still have to remove the light, and thereby the bumper cover?
just did that yesterday. yes it is possible to reach the 10mm bolt without taking off the entire bumper and headlight. there are actually two 10mm needs to be removed, one attaching the headlight to the fender, one attaching the fender to the frame. it was pretty awkward to access the two bolts with the bumper on. if I would do it again, I would remove the bumper first. no need to remove the headlight for sure
Just what i needed. Thank you sir!!
Dam on some no homo shit, I would like to give you a hug cause you just saved me a shit ton of money bruh 🤙🏻
Does that rocker piece on the bottom of the fender come off?
That part is riveted to the fender so it’s part of the fender assembly. To take it off, you will need to take the whole fender off.
Hi, first of all thank you for the video, can you provide a link to buy pre-painted front right side fender?
Extreme auto body parts and paint....google it
Same process for a 2009 TSX 4cyl?
Definitely great 👍
What about those tiny little screws bolts that also adhere the fender? You skipped those
Did you ever find out? I am stuck on these
@@TheAnnieSisters Those are rivets and I ended up sawzawing the fender off. Usually drill those out, but I didn't have the right bit at the time.
Should i completely remove the bumper and the headlight or i can just loosen them and work?
you are the man!!!
thx a lot
Awesome vids.... Show me how to remove the gas door please... 10th gen. Thanks
Good video. Thanks
Thank u sir
Great video . What’s the name of the tool you used with the hook you used to remove the fender well
It is usually referred to as a pick and hook set but you can buy them individually as a hook tool
Gracias 😎
You dont have to remove the headlight nor bumper , to remove the fender
He needs that labor
Great! Appreciate thus video!
Don't look like you need to take the headlight off to remove the fender?
You have to because the bottom light bracket attaches to the fender
Who thought of the Hodge Twins with the song at the end?
!