2008 - 2012 Honda Accord Front Bumper Removal and Install!
HTML-код
- Опубликовано: 15 сен 2024
- Welcome back everyone! In this video, Bob shows how to remove and install a front bumper in a 2008 Honda Accord. Let us know in the comment's what you think! Thanks for watching!
Products used in this video:
Push Clips (6 Sizes) - amzn.to/3BDSC5z
Push Clips (22 Sizes!) - amzn.to/42OHoHp
Push Clips (36 Sizes!) - amzn.to/42PvjBZ
Screwdriver Set - amzn.to/3IpFwge
Some other items to consider:
Ryobi electric ratchet - amzn.to/3uD4dPp
Ryobi Battery and Charger - amzn.to/3AKa4WM
Ratcheting Wrenches - amzn.to/3OY15pk
Socket Set (with swivel extension) - amzn.to/3Ix9SvX
Breaker bar set - amzn.to/3nT5LRD
Tool Kit - amzn.to/3acTWPN
Shop Rags - amzn.to/3e3OBv3
Shop Towels - amzn.to/3mRx0dG
Extensions - amzn.to/3cgcfEU
Loctite - amzn.to/3dyyMOe
Brake Cleaner - amzn.to/3uyr8vT
Spark Plugs Sockets - amzn.to/3zVkBgu
Spark Plug Gap Tool - amzn.to/3KUdSti
Dielectric Grease - amzn.to/3Ku6DHb
Video Gear:
DJI Osmo Mobile 3 - amzn.to/32mHI39
GoPro Hero 10 Black (basic kit) - amzn.to/3nVqSCy
GoPro Hero 10 Black (extra batteries) - amzn.to/3NVOmCp
GoPro Hero 10 Black (batteries and accessories) - amzn.to/3Rs49vs
62" Camera Tripod - amzn.to/2JNEnne
GoPro Single Suction Mount - amzn.to/3kbbzl3
GoPro Three-Arm Suction Mount - amzn.to/3k6ke8h
As an Amazon Associate, we earn from qualifying purchases.
We get commissions for purchases made through links in this post.
Disclaimer:
Trick Shift Garage hosts are DIY (Do IT Yourself), not mechanics. Due to factors beyond the control of Trick Shift Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Trick Shift Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Trick Shift Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Trick Shift Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Trick Shift Garage. 
Авто/Мото
Great short video and everything explained well!!! Thanks for sharing ❤
Thank you very much. 🙏
This is EXACTLY what I needed. My man. ❤❤❤
Glad it helped! Thanks for watching! 🤟
Thanks for this. Simple explanations and to the point.
Thanks for watching and taking the time to leave a comment! 🙏
Bro where have you been, your channel is exactly what I needed thank you
Lol anytime, Adrian!
Thank you. Fixing my daughters headlights.
Awesome, glad you got it done! Thanks for watching and taking the time to leave a comment! 🤟
Thank you very much, this was very helpful
Anytime! Thanks for watching and taking the time to leave a comment! We appreciate it! 🤟
Great walkthrough, fam :)
Thank you 🙏
Very helpful. Thanks!
Anytime! Thanks for watching! 🤟
Does anyone know where to get replacement grill in canada
I need this video for a 2010 mini van
Sorry, we don't have one available.
Great6 job. Thank you.
Thanks for watching! 🤟
Thank you!
Thanks for watching! 🙏
What size of push clip does it use for the bumper?
I can't remember, but if you get a universal kit there are different sizes in them.
My bumper fall down a bit. I don’t know will if i just put new clips, it will lift up number a bit or no?
Check the 2 tabs at the top. They hold the bumper in place so you can put everything together.
What size screws were those by the wheel?
Are you talking about the Phillips screws?
Very helpful ful
I'm glad it helped you! Thanks for watching! 🤟
I saw you included 3 links for clip kits, did you use the one with 6 different sizes?
Yes
Great and helpful video
Thanks for watching and taking the time to leave a comment! 🤟
1:49 what is the name of this product?
Hello Jamie. Those are just car ramps. Here is a link to them and I will also place a link in the description of the video. Thanks for the reminder!
Car ramps - amzn.to/43fiFfA
please what size is the screw that’s behind the fender liner u need to replace mine :/
It's just a Phillips screw.
How many clips will I need to replace? And what sizes?
That depends on how many clips are broken. You can resuse the clips if they are still in good condition.
As far as the size, I'm not sure. I just went into the clip kit I bought and found the one that would secure the shields properly without moving.
3:31 what is that jug at the bottom near the headlight housing ?
It's a resonator for the intakes on these cars. Seems to be pretty common with Hondas. After browsing on some forums, some people say it's necessary to have and others say it isn't. Here is a link for it:
www.hondapartsguys.com/oem-parts/honda-chamber-assembly-resonator-17230r40a00?origin=pla&gclid=CjwKCAiA44OtBhAOEiwAj4gpOQr1CwafpJFe37XetSNshmxa2aBQiVFZwQlmOrlwK5f4vgysyE2dXxoCkCAQAvD_BwE
i really like your watch, which brand is it?
That was my Galaxy S3 Classic. The battery life started sucking, so I upgraded to a Galaxy Wear 6 (I think that's what it's called).
This looks beyond easy. I just got in a car accident breaking my bumper. Got the same exact color, where did you get the bumper? Online?
This is actually the same bumper, I just wanted to do a video on how to remove and install one.
A local junkyard will have one most likely
@@kid5042 and I can take it to a shop to get it painted after I assume
@@trevey16 Nah you most likely won’t need to, this was probably the most common color this car was in
@@kid5042 appreciate it.
Can you swap 12 accord front bumper with 13-17 front bumper??
No, completely different platforms unfortunately.
@@TrickShiftGarage wow kinda disappointed but thanks a lot
Part numbers for bumper retainer clips
Bought on line for 2011 accord - se. Not one fitted.
Does anyone know where i could buy the right parts?
The dealership. The clips in the description worked perfectly for me. If you want factory replacement parts, you need to go to a dealership or find a Honda parts retailer online.
The video on how to replace the grill isn't in the direction.
That's in the other video. This just shows you how to remove and install a front bumper. Thanks for watching! 🤟
Can i use a 2010 grill on a 2012?
After doing some research, I don't believe you can. I think the 2008-2010 bumpers and grilles need to be paired together, and the 2011-2012 need to be paired together.
Thanks, i really appreciate it @TrickShiftGarage
Anytime brother. 🤟
Thank you for your help just subscribe to your channel. peace and blessings to you and yours. In the name of jesus christ the Lord. Thank you 🙏
Thank you very much! 🙏
I nid de bomper