Thank you for the help. I wish you guys would show the attachments on the piece also. Due to the way my 2005 Mazda 3 sport was set up, I had to modify the add on pieces for it to work. In addition, I had to change everything from the radiator support up. Had a few screws remaining because of the damage and broken accessories that I could not find to purchase. Thanks for the outstanding videos though!!! You guys have assisted me a lot. Next is the 2007 Dodge Caliber fenders, bumper and impact bracket.
We currently do not have an auto repair video that shows you how to replace the headlights on your Mazda 6. If you look at the back of the headlights inside the engine bay, there should be a few bolts that hold them in place. Hope this helps you out.We do carry replacement headlights for this vehicle. 1aauto.com 888-844-3393
thanks for the video clip,it has helped me understand how to do a minor repair on my wifes car after she got to close to a kerb while parking,it look easier than i thought,thanks again.
i have a yuuuuge power steering leak. i waited a week for some guy to come and help me, he never came through. so i watched this vid and took the damn bumper off and found the problem. the high pressure hose was loose due to the banjo bolt. now i really feel like a dumbass. once i work on a car i actually do pretty good and enjoy it. i was just intimidated. thx for the vid!!!!!
do i have to remove the bumper cover to remove and replace the headlight assemblies? i've heard that i do, but also saw somewhere online that someone said that you can change the headlight assemblies without removing the whole bumper cover. Thx in advance for any help.
I installed an aftermarket bumper and upper brackets along with a fender on a 2008 Mazda 3 and having a hard time seating the bumper into the brackets. I installed using the later half of your videos instruction. Any tips to get the bumper to seat correctly into the brackets? It's not flush and pokes out a little.
+ponyxpress2 new headlights really make a big difference, don't they? Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com?RUclips&CTA%20Comment&ATony
if one of the hole from where I catch the bumper with a screw its broken like I cant put a bolt/screw in it because it is cracked , can I make another hole where its not broken to catch the bumper in? or should I buy a new bumper?
Hi I want to change my sidelight bulbs its the one to the top right and left with the highbeam and I can't seem to remove those do I just pull it straight out or turn it clockwise?
GReeeeNBoiMaTTo If you want to remove the socket, turn it counterclockwise. To remove the bulb from the socket, just pull it off. Check out this video for further instruction ruclips.net/video/NfT6p9896HY/видео.htmlm58s
+elroduke barkey Thank you for watching! We do not have the exact specifications for those bolts, but you should be able to match them up if you take on to the hardware store! 1aauto.com
Reviving the dead here but... on the 2006 hatchback, the two front screws are rubber topped fasteners. I cant for the life of me figure out how to remove them. Help!
I figured it out. They are large push pin connectors. There is a slot in the side to pry the center pin up and then you can pull up the whole assembly. You do not need to remove the rubber top.
+blackrat1228 Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
for some reason my clips on the side won't come out, the screw in the middle that is supposed to come part way out don't at all they just spin...... its like that for all the clips on the 2 sides except one that i got out. are they stripped or why are they giving me so much trouble. if I have to rip them out where can i buy more clips to replace them.
You may want to see if there's a fastener that is rotating with the screw, which may need to be held in place so that you can back the screw out. 1aauto.com
+SuperSalazar94 The horns should be accessible without removing the entire bumper. Check right behind the grille, that is where they are located on most vehicles!
+luti 72 At this moment, the closest how-to video we have to your request is for this vehicle, which is very similar to the one you have. The steps may not be 100% the same, but should contain an adequate amount of information necessary for accomplishing this task:
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Thank you for the help. I wish you guys would show the attachments on the piece also. Due to the way my 2005 Mazda 3 sport was set up, I had to modify the add on pieces for it to work. In addition, I had to change everything from the radiator support up. Had a few screws remaining because of the damage and broken accessories that I could not find to purchase. Thanks for the outstanding videos though!!! You guys have assisted me a lot. Next is the 2007 Dodge Caliber fenders, bumper and impact bracket.
We currently do not have an auto repair video that shows you how to replace the headlights on your Mazda 6. If you look at the back of the headlights inside the engine bay, there should be a few bolts that hold them in place. Hope this helps you out.We do carry replacement headlights for this vehicle. 1aauto.com 888-844-3393
thanks for the video clip,it has helped me understand how to do a minor repair on my wifes car after she got to close to a kerb while parking,it look easier than i thought,thanks again.
i have a yuuuuge power steering leak. i waited a week for some guy to come and help me, he never came through.
so i watched this vid and took the damn bumper off and found the problem. the high pressure hose was loose due to the banjo bolt. now i really feel like a dumbass. once i work on a car i actually do pretty good and enjoy it. i was just intimidated. thx for the vid!!!!!
Thank you so much!!! This video was so helpful!!
do i have to remove the bumper cover to remove and replace the headlight assemblies?
i've heard that i do, but also saw somewhere online that someone said that you can change the headlight assemblies without removing the whole bumper cover. Thx in advance for any help.
Jay S yes the bumper has tho come off
how about to remove/replace rear bumper cover for 2010 Mazda 3? thanks!
Love this video!!! Do you have a tutorial on how to replace an a/c condenser on a 2006 Mazda 3?
Very useful. Thanks.
do you need to do this to remove the front headlights?
Yes
I installed an aftermarket bumper and upper brackets along with a fender on a 2008 Mazda 3 and having a hard time seating the bumper into the brackets. I installed using the later half of your videos instruction. Any tips to get the bumper to seat correctly into the brackets? It's not flush and pokes out a little.
+ponyxpress2 new headlights really make a big difference, don't they? Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com?RUclips&CTA%20Comment&ATony
What about the grill? What if I’m replacing the bumper cover but keeping the grill
Hi Do you know if this procedure is the same for Mazda 2
+Graham Charlton We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task.
@@1AAuto ok thank you
if one of the hole from where I catch the bumper with a screw its broken like I cant put a bolt/screw in it because it is cracked , can I make another hole where its not broken to catch the bumper in? or should I buy a new bumper?
I ran into this same problem as both bolts broke on my my bumper. I just used a good strength zip tie in each corner
Hi I want to change my sidelight bulbs its the one to the top right and left with the highbeam and I can't seem to remove those do I just pull it straight out or turn it clockwise?
GReeeeNBoiMaTTo If you want to remove the socket, turn it counterclockwise. To remove the bulb from the socket, just pull it off. Check out this video for further instruction ruclips.net/video/NfT6p9896HY/видео.htmlm58s
What are the bolt sizes? Like I need to buy some of them
+elroduke barkey Thank you for watching! We do not have the exact specifications for those bolts, but you should be able to match them up if you take on to the hardware store! 1aauto.com
could you do a video for 2012?
Hi would this be the same removal as the the mazda 5
Reviving the dead here but... on the 2006 hatchback, the two front screws are rubber topped fasteners. I cant for the life of me figure out how to remove them. Help!
+Jspeed Jones We do not have a video for the hatchback, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
I figured it out. They are large push pin connectors. There is a slot in the side to pry the center pin up and then you can pull up the whole assembly. You do not need to remove the rubber top.
Do you have a video on this for a pontiac g6 2006 or do you know where I could get information on how to do this to my Pontiac g6
Nicely done, came in handy. Thanks
+blackrat1228 Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
for some reason my clips on the side won't come out, the screw in the middle that is supposed to come part way out don't at all they just spin...... its like that for all the clips on the 2 sides except one that i got out. are they stripped or why are they giving me so much trouble. if I have to rip them out where can i buy more clips to replace them.
You may want to see if there's a fastener that is rotating with the screw, which may need to be held in place so that you can back the screw out. 1aauto.com
I would like to see a 2003 Mazda 3....
You might be able to.
How can you replace the brackets for the front bumper
Thank-you so much
We currently do not have an auto repair video that shows that particular repair. 1aauto.com 888-844-3393
Thank you.
INSERT VIDEO
nice, thanks!
is this also how to replace horn on this model?
+SuperSalazar94 The horns should be accessible without removing the entire bumper. Check right behind the grille, that is where they are located on most vehicles!
how bout a 2014 Mazda 3 sport?
+luti 72 At this moment, the closest how-to video we have to your request is for this vehicle, which is very similar to the one you have. The steps may not be 100% the same, but should contain an adequate amount of information necessary for accomplishing this task:
can i do this without having the car jacked up?
nice :)
+Chase Kile Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What About Mazda 6 2012