Merci beaucoup pour vos explicatons. J'avais le même problème sur mon 3008 hy phase 1. (erreur 0EB3) .Après ajout additif toujours le même problème. Erreur commande pompe additif. Impossible de démarrer la pompe avec le diag. Après démontage de la pompe comme vous, mise à jour additif et effacement des erreurs BSI ça fonctionne ...Merci encore et félicitations :)
C3 mk 2 here, was not a one bolt job for me unfortunately. Got 2 of them off but was defeated by a riveted clip. Decided to take just th bottom half of the box off instead (3 spring quarter turn screws)
HELLO, CAN YOU HELP ME. I HAVE A CITROEN C-ELYSEE DIESEL ENGINE. A FEW MONTHS AGO I FILLED THE BAG WITH FAP ADDITIVE. NOW A NEW FAULT APPEARED TO ME, THE ENGINE FAULT LIGHT TURNED ON AND I CANNOT ACCELERATE THE CAR OVER 90 KM. THE COMPUTER GAVE ME THE ERROR P1434 WHICH MAKES REFERENCE TO THE ADDITIVE SYSTEM AND THE PUMP. IN THE WORKSHOP THEY REMOVED THE PUMP AND TESTED IT AND IT RUNS PERFECT. THEY HAVE NOT BEEN ABLE TO GIVE ME A SOLUTION AND THE FAILURE CONTINUES. COULD YOU GUIDE ME? THANK YOU
My C4 has this issue. However only comes on during long journeys and after half an hour maybe. My mechanic has topped up the fluid yet it still remains. The warning appears for between 5 seconds and maybe two minutes before disappearing, then will beep and appear again. Also, this usually occurs when accelerating at higher speeds. Any ideas? Thanks.
I do not have "special functions" option so I'm unable to make it as if I changed the pump, even if the car is fine. Is there any other way around this?
No sadly not, they are there to help lower the temperature at wich the dpf regenerates, turning it off would shortly block the dpf so if it's on get it sorted fast!
Hi, I need your advice on my Citroen DS4. The car has 2 major issues; 1st this same error "SERVICE" light and "Engine fault: Please repair is on 2. The Auto gear has stopped working. I am using the manual at the moment. I did a scan and was told since the manual still works, then the gearbox is fine but the Auto gear selector needs to be replaced. I was also told the fuel additive pump needs to be replaced. I got the part number for the gear selector and was able to get a replacement part on eBay but I can't get the part number for the additive pump to know which to buy online as the price the garage is charging is about £750 for the two.
Nice, knowing it has it's own ECU you can go into is a valuable nugget of knowledge to save on research. Thank you Jimmy the main man.
Merci beaucoup pour vos explicatons. J'avais le même problème sur mon 3008 hy phase 1. (erreur 0EB3) .Après ajout additif toujours le même problème. Erreur commande pompe additif. Impossible de démarrer la pompe avec le diag. Après démontage de la pompe comme vous, mise à jour additif et effacement des erreurs BSI ça fonctionne ...Merci encore et félicitations :)
Thanks for that long explanation 👍
No problem 👍
Changed the bladder before on a service but never configured it....didn't come back. Ops. Learning more everyday
C3 mk 2 here, was not a one bolt job for me unfortunately. Got 2 of them off but was defeated by a riveted clip. Decided to take just th bottom half of the box off instead (3 spring quarter turn screws)
good video well explain but the audio is some time a little bit low for a no mécanic spécialist .
Very nice video thank you
HELLO, CAN YOU HELP ME. I HAVE A CITROEN C-ELYSEE DIESEL ENGINE. A FEW MONTHS AGO I FILLED THE BAG WITH FAP ADDITIVE. NOW A NEW FAULT APPEARED TO ME, THE ENGINE FAULT LIGHT TURNED ON AND I CANNOT ACCELERATE THE CAR OVER 90 KM. THE COMPUTER GAVE ME THE ERROR P1434 WHICH MAKES REFERENCE TO THE ADDITIVE SYSTEM AND THE PUMP. IN THE WORKSHOP THEY REMOVED THE PUMP AND TESTED IT AND IT RUNS PERFECT. THEY HAVE NOT BEEN ABLE TO GIVE ME A SOLUTION AND THE FAILURE CONTINUES. COULD YOU GUIDE ME? THANK YOU
My C4 has this issue. However only comes on during long journeys and after half an hour maybe. My mechanic has topped up the fluid yet it still remains. The warning appears for between 5 seconds and maybe two minutes before disappearing, then will beep and appear again. Also, this usually occurs when accelerating at higher speeds. Any ideas? Thanks.
Pity your Autel doesn't have Bi directional controls.. Ideal for testing things like that
I do not have "special functions" option so I'm unable to make it as if I changed the pump, even if the car is fine. Is there any other way around this?
Nice so what exactly went wrong with that part? Was terminals just poor ? & u needed to regenerate from Autel unit ?
Ive a p1445 code coming up.Should the be a 12v ignition feed to the pump. I tired to activate my pump with my scan tool but it didn't power up.
I have Peugeot partner 2018 saying additive pump fault, can they just be turned off ?
No sadly not, they are there to help lower the temperature at wich the dpf regenerates, turning it off would shortly block the dpf so if it's on get it sorted fast!
Hi, I need your advice on my Citroen DS4.
The car has 2 major issues;
1st this same error "SERVICE" light and "Engine fault: Please repair is on
2. The Auto gear has stopped working. I am using the manual at the moment.
I did a scan and was told since the manual still works, then the gearbox is fine but the Auto gear selector needs to be replaced.
I was also told the fuel additive pump needs to be replaced.
I got the part number for the gear selector and was able to get a replacement part on eBay but I can't get the part number for the additive pump to know which to buy online as the price the garage is charging is about £750 for the two.
merci
i have p1442. its the same problem? thanks
Da li na ovom snimku na samoj elektronici problem mast koka je pravila spoj?
Thanks
Could someone write the step by step process of what he does? Like for example
"Go in...
Press..."
And so on. Thanks
Audio very low !