Это видео недоступно.
Сожалеем об этом.
2016-2021 Nissan Altima mass air flow sensor replacement rough idle
HTML-код
- Опубликовано: 20 авг 2021
- thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my RUclips channel on your social media. Links will be on the bottom.
#nissanaltima #mechanic #jabothemechanic
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive
Yeah, lesson learned stay away from the cheap Amazon ones, the airflow rate on it didn’t even move. Thanks this helped me reprogram the original after cleaning it 😂
Appreciate you bro! Took care of this by myself in no time 🤘🏽
Love this approach…to the point…no “uh’s””hmm’s” or any wasted video…I have subscribed for future videos…👍
Thank you for your support
Ty Ty it worked!!! Just needed to clean the sensor though!
Done deal worked like a charm
Thank you man!!! 😊
Helpful tips
Preciate it 👍🏿 great info and tutorial 💯🙌🏿
THANK’s 🙏
Thanks! 1 question. I don't have any check engine lights on right now, so should I expect the check engine light to come on when the sensor is unpluged?
It came on and went out a few months ago. Auto Zone said the code is spark plugs or coil. I replaced both. They tested battery, which is new, the starter and alternator, all 3 where working good.. but the car still has a hard time starting up and then cuts out. Takes a few minutes of holding the start button to finally engine to stay on. Some white smoke comes out, which normally didn't before. I'm going to try to replace this sensor next.
Thanks!!
I have a 17 Altima, I believe the sensor is the issue. I can shift fine, no funny noises no burning smell it just doesn’t accelerate. Car is in the shop took it in today
Shit don’t tell me that rn bro lol I have 16 about to change dat rn
Thank you I hope it works..
I have a 2021 altima supercharged 2.0
I got tramsmission fluid trhue cold air intake pipe passing to the MAf please advise
Do I follow these steps for a 2018 Nissan Pathfinder on a p0101 code? Also I don't have a code reader so will the check engine light go off on its own? Thanks for your help bro👊🙏
Does it work on the 2017 maxima
Do you have to reset the code after ?
Will this programming of MAF also work with 2015 Nissan Altima?
When I turn my wheel slightly when starting the lights go dem for a second and the car seems as if it wants to cut off… this came up in a Google search… any idea what it could be ?? Thanks in advance
your battery is going bad
So I drive for Uber, 82,500 miles in under 3 years. Not all of that is Uber but 60k at most is.
I turned the car on and drove 35 min, turn it off did some things, turn it on engine light is on.
It felt like in that 35 min of driving, that a 5% push on the accelerator, gave out 15% of real power, or 3k RPM. If I’m cruising at 60+mph and apply more gas, it never really goes over 2500 rpm. But now it’s sensitive. Got the code read and here I am. I
I read someone cleaned there’s and put it back in, how would we know it’s the case unless we just took it out, and put it back?
i'm doing it right now ler's see what's happend ty
Would this be the same process for a Nissan Pathfinder? Check engine light and the slip traction sign stay illuminated after new MAF was installed. If so, do I have to delete error code cause I do not have that device?
Sometimes if you disconnect the battery works 👍
is not deleting the codes
What if I don't have a scanner to erase code
Does the replacement sensor have to have that white plastic cover on it? Cause some I’m looking at on Amazon does not have it?
Do not try to buy a cheap one. Highly recommend buying the Hitachi which is the OEM. The cheap ones will not program correctly and your check engine will continue to appear
I heard if you change mass airflow sensor you have to take it to Nissan so they can reprogram it or else engine light will come back on.
Yes. Pretty much
Reprogram? No. Just clear code after replacement.
@@dannysmobiletuneup8317 what do you mean by clear code
Can I just replace the sensor and hopefully the engine light will reset itself or no
No it wont
What if I don't have a scanner for delete the code ? What should I do instead...🤔
I’m wondering this same thing
Soo what did you do?
Google it. I was able to get rid of the code.
Is the MAF sensor the same for the 2019 and the 2020?
I have this same question 🙋🏻♂️
@@edenc.m4576 me too😐😐
Same brand but different part number. It runs 2013-2018 then changes