How to install a Ryzen CPU and its Wraith Stealth Cooler | AM4 socket | AMD
HTML-код
- Опубликовано: 23 авг 2024
- We all had to start somewhere. For you folks who are getting ready and are researching on how to build your first gaming pc then this video is for you. How to install a Ryzen CPU and its Wraith Stealth Cooler.
-----------------------------------------------------------------
Scotts PC Amazon store front - amzn.to/43TFq9R
-----------------------------------------------------------------
**AMAZON AFFILITATE LINKS**
Ryzen 5 5600x - amzn.to/3wDyAox
Ryzen 7 5800x - amzn.to/3n5aC2o
Ryzen 9 5900x - amzn.to/3DjeiDa
Ryzen 9 5950x - amzn.to/31S5tCK
-----------------------------------------------------------------
My Apple Airpods Pro - amzn.to/3Aq9v2u
-----------------------------------------------------------------
Computer fans - 3 tips on how to determine airflow direction - intake vs exhaust - • Computer fans - 3 tips...
------------------------------------------------------------------
I didn't become MONETIZED without a little help! Here's a link to TubeBuddy free Software extension for RUclips that will help you with your RUclips channel tags and titles to help get more views! MUST HAVE for any RUclipsr trying to grow their channel. Tubebuddy has helped my channel get more than ONE MILLION VIEWS - www.tubebuddy....
----------------------------------------------------------------
Equipment I use (Amazon Affiliate Links)
Canon M50 - amzn.to/2Ksj5fK
Samsung USB-C to 3.5mm Headphone Jack Adapter - amzn.to/3pgLzHY
Neewer Ring Light Kit:18"/48cm - amzn.to/34Hs9UA
Samsung Electronics Galaxy Note 20 Ultra 5G - amzn.to/3ruVFa8
GoPro HERO8 Black - amzn.to/34M3TAR
Professional Grade Lavalier Lapel Microphone - amzn.to/3pmm9Zs
----------------------------------------------------------------------------
I use Amazon affiliate links I use to support this channel. If you click on them and buy something, I will earn a small commission. They do not cost you anything extra.
I just installed the Ryzen 5950x. It's a Beast! CPU prices are dropping on the AM4 platform - amzn.to/3LQ6XRg
bless you most people skip over this and I was starting to worry that I was missing some baackplate screws- I just had to press a little harder so the screws would catch! thank ya!
Glad to hear the video helped some! Thanks for this comment and the sub! ⚡️ Good luck to you my friend! ⚡️
thanks man had the same problem i was worried for a second
Same
welp im still stuck with the screws, im apllying pressure on them like crazy, they wont mo e a bit
@@gnt.no_1I'm having the same issue, no idea on what to do
This was a nightmare to install
How lol? Wait until you get into aoi coolers 😂
Very important note when installing the stock cpu fan: there is only one way to install it which is by applying pressure on the back plate of the mother board ( black metal plate found behind the motherboard) then start screwing and applying pressure starting from top right corner then bottom left and so on. Do not screw one screw at once try equally distribute it. thank me later 😉
Holy shit thank you so much. I was going crazy from not knowing why the screws wouldn't go in
I love you
You're the best dude lmao, I was wondering why only one side was not being able to be tightened
Thank you so much dude. This stumped me and my brother until we looked in the coments and saw yours. Real life saver thank you
@@viroxin1260 they have to sorta reach out to the holes
I am gobsmacked that you only have 2000 subscribers. This video is clear, informative, and you're a very friendly and welcoming host. Thank you for this! You just earned another subscriber.
Thanks for the kind words and thanks for the sub! ⚡️ Good luck to you! ⚡️
The last time I built a PC it was with a third-generation Intel i5 CPU. Those stock coolers were absolutely garbage - crappy plastic pushpins that basically disintegrate themselves if you ever need to take the cooler off. These Ryzen coolers are a godsend compared to those, and I love that a backplate is standard hardware instead of something reserved for aftermarket coolers. Good stuff, and great guide.
Thanks for watching and thanks for the comment!
One of the most straightforward and informative installs. Thank you for the simplicity and explanation in terms we all can get. Bravo!
old timer here.. probably building my 13th or 14th computer, but it's been a long time and haven't dealt with am4 at all, so this helped to confirm my assumption that the brackets needed to come off. good, straightforward, helpful video. thanks!
Im building my first pc ever and im really excited, thanks for the tutorial, it helped a lot!
Good luck to you! ⚡️
Absolutely brilliant from you. I was struggling to engage all the screws for my cooler. You saying to engage a couple of threads in each screw before fully tightening everything was a life saver. Thank you.
thank you so much! I was worried pressing down on the screws would be bad but this totally helped and it made me feel a bit better about my first build!
I was right in the moment and realize the videos I watch didn't show wraith cooler damn, you saved me!
Glad the video was able to help. Good luck to you!
I’m building my first pc while typing this. I hope it helps!
Good luck to you! ⚡️
Same and installing this fan is a pain I feel like I’m gonna break something it’s so annoying
I love how straight forward you are and right to the point. Now it has been years since I built a system and this was a great refresher. Nice job.
I subbed because this video got straight into the topic without a single second of intro, and was very helpful and detailed. Thank you very much for this video.
Thanks! ⚡️ LOL... I hate long intros and fluff myself. Thanks for the sub and thanks for watching! ⚡️
I’ve seen this process so many times for how many pc build I’ve seen and my coolers wasn’t going in until I noticed my motherboard backplate actually fell in the back of my case I was so worried but I just put it back in place and easy sailing from there
Live and Learn!!! Thanks for sharing!😎😂😂😎
Couldn’t agree more
Great upload mate! Sending support from Australia 🇭🇲
Much appreciated! ⚡️ Thanks for the support! ⚡️
I never installed the screw type fan before and wanted to make sure i was going to do it right. Thanks for the vid that went straight to the point and was well done.
Much appreciated and thanks for watching! ⚡️
Subscribed my friend, my first PC build is in the works and you are the best I've found who explains the fine details
Thanks for watching and thanks for the sub! ⚡️ Much appreciated! ⚡️
Check out how to install Cooler Masters Hyper 212 Black Edition - bit.ly/33mIEFv
Here's an updated version on how to install the hyper 212 black edition which includes the WIRE FAN CLIPS and the FAN SPLITTER to add a second fan - ruclips.net/video/AQ5FVvdDz1c/видео.html
Thanks for this. Super simple fast and helpful. Really wanted to hear about how tight to make the screws... noted can't overnighten. 👊😓👍
Thanks and good luck to you!
Thank you! I was getting CPU fan error, then I watched this video and learned a few things!
Glad the video helped! ⚡️
I couldn’t figure out why the wraith wasn’t screwing in and I hadn’t realized the back plate came off! Lol. Thanks!!
you forgot to add in the title "because the real cooler hasn't arrived in the mail yet"
Hahahaha....you know it!!!!
Bruh wraith coolers arent that bad
@@frehesh.4386 Wraith stealth real shit.
@@user-wj3eq7dz7u no they are not loud and they get the job done and dont look bad. For a stock cooler its good but not ideal
@@frehesh.4386 Bruv I literally bought R5 3600 yesterday with a stock cooler and my temps hitting 91°c on 100% usage and 50-51 on idle.
building my own pc.
the goddamn manual didnt help, this video did thanks!
Helpful vid mate. Cheers from an Aussie fan.
Great video, will definitely refer to this later on, after reading comments I feel very lucky to have access to the backplate through my case back panel
Exactly! Easy access to the back plate saves a ton of time and hassle.
thank you so much, exactly what i was trying to find
Thanks for watching and good luck to you! ⚡️
Thank you for everything and thank you for encouraging me. My hands are shaking little much than yours due to my Neurological disease and I was planning to call my friend to get my cpu installed but now, I think I can do that myself.
Awesome! ⚡️ Have fun with your computer! ⚡️
What a great video!!! Really helped with my wife's new build as it didn't have the latch CPU fan like the Ryzen 9 3900X, and the instructions on the MOBO manual didn't have instructions.
Thanks for this. I'm currently waiting for my new pc parts and will try to assemble a unit for the first time.
Thanks for watching and good luck to you! ⚡️
I thought I could do this on my own without guides. But then I didn't realize the backplate disappeared and here we are😂
So, I didn’t know about the backplate cuz I don’t have access to it, is that an important step to why my pc says no signal
Exceptional video. Straight to the point.
Thanks for watching my friend and good luck to you! ⚡️
Lol the backplate fell off on mine and didn't figure it out until I saw this video thx so much
I’m so mad I didint see this video earlier I got this cpu and was gonna wait until Tmr to get thermal paste from the store because I didn’t know it comes with thermal paste already on it when it’s new thank you for the video😂
Thank you so much, I thought I was missing something when I couldn't put it on but just turned out the back plate fell 😂
You're welcome!! It's always the back plate....good luck to you!
This helped me so much, thank you!
Thanks man, I just installed my stock cooler and was worried I did it wrong.
Thanks for the Video. I really had problems getting the screws in, it just did not wanna connect with the backplate. It felt so wrong using that much force.
First time is always the scariest. Feel like you're gonna break the motherboard...LOL. Thanks for watching!
Well explained. Thank you.
Check out my ULTIMATE Noctua gaming PC!!! Ryzen 5900x with an ASUS Noctua 3070 GPU. 11 total Noctua fans - ruclips.net/video/VH2sZqj2JeY/видео.html
Legend. Thanks
The cooler was so hard to screw down. I thought i was gonna break my motherboard
First time is always a little nerve racking! ⚡️ LOL... Good job! ⚡️
@@ScottsPC like i had to put alot of pressure. The screws didnt touch the standoffs. When i get to screw down one and move to the next, the one i recently screwed down just poped off. Sorry for bad english. Its not my first language.
Your English is just fine. Now your an expert at installing a cpu and cooler! ⚡️ Thanks for commenting and good luck to you! ⚡️
Guys please help my screws of the fan won't install, it's in a perfect place the tip of it moves but the pointy tip won't move please help
Yesterday I spent like an hour trying to put the damn thing in. The backplate wasn't even behind the motherboard. It fell off onto the table. I had to lean the entire tower on the cpu box at the backplate to keep the backplate up. Laying it on the table wouldnt work. It's the 5600x. The temps literally idle at 95 degrees C. I went to bed, wake up, turn computer off of sleep mode, immediately go into cote temp checker and it's still 95. If I open a game it's still right about 95. The pc is slow so it might actually be thermal throttling? Or it could be a bad sensor. The air also doesn't feel hot from the cpu.
Thx mate, i was going to spend extra 30bucks for a new fan. You save me
great video, no filler
I'm in the middle of building my first pc and I'm very nervous about breaking anything haha. So this was very helpful as I wasn't applying enough pressure to get the screws to grab. Thank you very much
Good luck to you! ⚡️
Hi what do I do if I can't remove the two plastic clips? The screws are far too tight and don't budge, and I'm afraid of applying more pressure in case I damage the motherboard
thanks, was wondering about the brackets on the MB around the cpu slot, figured they had to be for some other kind of cooler but had to make sure from a video :D
Thanks for watching! ⚡️
Thank you for the help! Great channel!
What a kind man
The screws don’t go in at all what am I suppose to do
Could the cpu possibly be damaged if I put too much pressure? I bought a ryzen and with it came this cooler but its nearly annoying to put the springlocked screws down
Thanks worked perfectly
I ran out of thermal paste, will taco bell fire sauce work? Great tutorial. Keep up the good work.
Just don't use toothpaste! ⚡️ hahahahahahaha! ⚡️ Thanks for the comment! ⚡️
I know this a one year old video, but is it possible to install a Ryzen 5 3600 onto the b350m bazooka is it compatible or not if so do I have to do a BIOS update.
I would go to pcpartpicker.com and enter your build to see if compatible for a second opinion... I don't know off the top of my head.
Loved the vid, super informative and easy to understand! I was wondering, does the alignment of the fan matter, or will it work the same regardless of the direction that the logo is pointing?
Yes it does
Very beautiful presentation my friend, very great job well done 👍
Have good day and see you around 👍
Thank you! You too!
Thanks very helpful👍
It's been a fat minute since I built my computer and I forgot about the back bracket 🤦 🤣 I was pissed because I couldn't find out how to make my cooler thread lol
Your videos are simple and entertaining which I really like. I have one question though why do you have only amd cpus
BUT MY PC DOESNT TURN ON
Thanks I was wondering how it screwed in with no threads on the board. The wraith looks similar to the OEM Intel coolers in HP or Dells in the past.
I have an issue. There are springs on my screws that don’t let them go down and they stay up so I can’t screw in my Amd stock cooler. I bought a 5 3500X
same issue
The cooler i just got with my cpu had springs on it as well and it looked like the screws wouldn't go down all you gotta do is just screw them a little once you got the cooler in place and it should stick it worked for me
I got this fixed by just pressing really hard
Not only that the springs would crack while screwing like something is cracking , I was afraid that something doesnt break
thx homie
I was about to rage out over previous videos ....but then i saw yours and you explained it properly God bless
Hahahaha....glad the video helped!!!!!😂😂😂
Thank you for this video, I began installing the cooler (following the directions included in the CPU/cooler box) but that caused me to mess up due to the instructions not telling me that the backplate will fall off. I'm now trying to fix that problem....
Hope everything is good to go! Thanks for watching!
@@ScottsPC For a bit my PC wouldn't show as running on the screen (it was fine before the PC cooler change) so that worried me, but now it's running again. Although this weird thing happens where if I have all 4 RAM slots filled up, my PC won't show up on the monitor while it will show up on the monitor if just 2 of the RAM slots are filled.
@@1stAid hey mate i have heard that overtightening your cpu fan screws can cause problems like this
Im removing my motherboard now to check the backplate. Must have fallen off as the screws wont reach the standoffs at all. The older way of attaching the old rgb wraith cooler was much better with the clips. This is so fiddly i got thermal paste everywhere now.
I hate this thing the spring things wond let the screws go down pls help someone
Thank you . . . And Go Giants!
Hello I have a question. If the cooler comes with pre applied thermal paste (like the stock cooler) does that still mean we have to find thermal paste from a store and apply it?
No.... But it's always a good idea to have some spare thermal paste if you make a mistake... Good luck to you! ⚡️
@@ScottsPC Thanks! My final part comes in on the 16th so I’m excited but nervous at the same time 😅
@@garzins take your time and watch as many tutorials as possible... You got this!
@@ScottsPC Thank you for the motivation on this :,) everyone else has been telling me it’ll be a waste of money but your the first person to encourage me
THANK YOU!!!
You're welcome! Thanks for watching!!!!
Thanx for the tutorial! You have helped me a lot, but there is one thing I am still confused about: what motherboard to choose? On the market there are motherboards on which Wraith Stealth can not be installed without blocking the nearest memory slot. The best would be to go for a micro ATX motherboard with 2 mem slots. Should I choose an ATX one instead? Thanx!
Привет,мы обычно наносим термопасту по всей поверхности процессора тонким слоем.У вас горошина посередине ))
Just the way I've been doing it over the last few years. My temps are good. More than one right way to apply thermal paste. Thanks for the comment!
I never installed a Cooler before... one think i dont understand is why is the cpu out? Why not just put the old Cooler out and put the new one on it? Did i miss something?
Thanks!
what did you do to hold in the backplate while you did it?
just wondering whether i should get someone else to hold it in since mines in the case too
In this video I had the motherboard on top of the motherboard box so no issues. But yes, having a friend or family around always help when you need an extra set of hands when your in your tower. Good luck to you and thanks for the question!
this was useful video . i have to replace my brother cpu fan for his computer
Thanks for watching and good luck to you my friend!
You also need to make sure that the back plate is still attached before trying to screw down the cooler. Is Correct ?
Yes... Absolutely
What do I do with the backplate?
very nice and detailed video = so if the fan were to break down later on, do i just buy the replacement fan and screw the fan to the heatsink ?
If the fan failed, I would just get a whole new heatsink/fan... Good luck to you! ⚡️
@@ScottsPC ...i'm not a handyman kind of person and changing a CPU cooler will be a major challenge for me........especially when there's a chance that the CPU might stick to the heatsink and get pulled out of the socket ?
@@worstalentscout can be intimidating if you've never done it before... You just gave me a video idea... Basically after undoing the screws... Put firm pressure on the fan/heatsink and turn ever so gently until you feel the thermal paste breaking contact with the cpu..... Easier said than done.....
@@ScottsPC someone suggested using the pc intensively to get the CPU to soften the thermal paste 1st
Great video, thanks! God bless 💪🤝
Thanks, you too!
Helpful video!
I've done many CPU installs but I wasn't prepared for this one.
I had my board already in the case and when I noticed I had to remove those black clips I did.
Didn't realize I lost the back plate and was having an impossible time with the screws.
Had put the back plate back into place and use my wife to hold it.
Only question now is if the thermal paste application is still okay after all that mucking around.
Might have to reapply it.
I'll test thermals tomorrow and stress test.
Thanks for the video!
A second set of hands never hurts....I always have some extra thermal paste because I might muck it up....thanks for watching and commenting....May your temps be low!!!
well im taking out the gpu and the cpu with the cooler(of a 5600g prebuilt for 600) into a new one just mainly for the better airflow and looks too but it makes is possible for a high end gpu in the future for me, didn't see much videos on this part for it. and my parts are coming in Thursday the main one i was worried about was the mobo and being compatible with my cpu, luckily i found one that did say 5000 series compatible and has bios flashback so really i hope i don't brick it but thank you for showing this step
Thanks
Great video; concise, informative. Thank you.
Glad it was helpful!
Thank you
Thanks for watching! ⚡️
It looked like you were applt thermal paste to the cpu when you already had it preapplied on the cooler.
I just ruined a cpu before watching this because every time I tried to seat the fan on my MOBO it would shift and the thermal paste dragged the cpu with it and now I have bent pins. FML.
Me too bro
Im having a trouble right now my cpu cooler doesnt go down it has springs
So what do I do if i am installing it in the case? Last time I had my brother help me but this time I have to do it alone.
Thanks man!
Thanks for watching! ⚡️
@@ScottsPC Quick question, does the stock cooler came with a thermal on it already?
@@Joshua-ts5tb if you bought brand new then yes. If used, you need to buy some thermal paste. Suggest you buy some thermal paste in case a mistake is made... Good luck to you! ⚡️
Does it matter which way round the cooler is installed?
And the cooler fan can it only plug in one way?
Hey man do I need to remove that back plate?
No... You'll need the back plate to attach the fan.
@@ScottsPC ow thanks man
Thanks a lot this helped a bunch. Thought I had a simple motherboard and processor switch and found out the motherboard I got is too big for my case and ima have to pretty much build it out again.
hey man, i have recently installed a 5600x on my pc and installing the cooler was a nightmare. i have installed cpus before and it was way easier. this one seemed like the screws are just a fraction shorter or something because i had to put a lot of force to get the backplate and cooler together in order to screw them together. does someone has any thoughts and/or similar experience?
Yeah I can’t seem to be able to make them connect
@@haz7039 it does take a bit of force, but i believe it should be less than the one that i put in for example
I heard the stock cooler has a really sticky thermal paste?
Does it matter which way I plug the fan in my mother board doesn’t have that plastic catch I guess that yours had
What steps are taken after installing a cpu? Say upgrading a Ryzen 7 3700x to a Ryzen 9 5900x? Meaning anything on the pc software that needs done or changes to drivers?
I just upgraded from a 2700x to a 5900x a couple days ago. Used my existing x470 motherboard... I had to update the bios because of new generation cpu. I did a lot of research before updating the bios for this Asus motherboard... Didn't want to brick the motherboard... Didn't want to spend extra money on a b550 or x570... 5900x works like a charm... Just be careful if you're gonna use an older generation board like myself.