I watched this video a few times and finally decided to bite the bullet to buy it as 'The Boss' gave me permission to get it provided I build her an rc to her specs 😄. Then I saw they made the P803A model and had a tipping bed. I knew I had to get that version 😎👍. Can't wait to get it. Awesome review on this truck. I'm sure I'll be acting the same as you when I get mine,lol
Hi I have just brought the p801and the p802 can’t wait for them to come I have two make sure I got the battery fully charged and ready to go so I can have a really good play
I have the P801 and P802 and run them on a 3 cell 11.1v lipo and they really get up and go!! the speed controller is good for upto 12v you should try it ...even more fun!!
It would make a very interesting RC model to build entirely from bags of parts. Full build. But that would probably take several nights. It took 8 hours just to lube the road wheels on my Tiger 2 tank (because you have to be insanely precise). I enjoy that stuff more than running them sometimes, because I don't like getting the paint and details roughed up.
I bought the cross rc bc8 mammoth. It's a 1/12th MAZ 537. All metal chassis driveline suspention. Sound and lights, it's so fokking awesome! I think its much better then this hg p801 but also more expensive
I may never be able to afford one, an Banggood won't just "send me one".... (I'm too grumpy I guess). But *DAYUMM*!!!!! 😱😱😎👍👍🍻🍺 That thing IS a Beast! I want on so bad.... won't happen. 😫😞 I do look forward to seeing your touch on this Rig!! Carmine 💥 ⛽
What motor and size ESC does it have? Enough room to upgrade the motor to a 500 size? I have the HG P406 with a Traxxas Stinger 500 size motor. Now, AFTER watching the video, I am impressed. Looks like a 550 Titan or equivalent motor. I saw this advertised on EBAY or somewhere? And the specs they gave were TOTALLY different than what I see here. This deserves a Brushless set up.
Awesome video, and awesome rig. Every scratch and when you repaint is going to add realism because they won't match perfectly. If you want to make the body have a pop factor to it you could do a dark wash. That would probably take it pretty far. Can this truck fit a axial scx10ii in the back of it? Even if you have to lay the sides down, that would be ok too. I can't wait to see where your vision takes you with this one.
You prolly dont give a shit but if you are bored like me atm you can watch all of the new movies and series on InstaFlixxer. I've been watching with my girlfriend during the lockdown xD
Oh. I forgot to mention. It REALLY, well, all RC trucks, cars and most boats need driver figures. They make some 1/16 and 1/12 scale possible military figures that need a ride.
Hey greatings from Sweden, you got your self another subscriber tonight. Just found you and seem to be all in just from watching the setting where you are filming with that shop all to scale. Thank you for this video, like i said to mr ThatsmyRc, i think one of those will have to move to sweden soon. Awesome, keep it up😀👍👍👍
seems like the articulation for the suspension still bit hard. perhaps if soft a bit it will much better with less tires hang on the air.. just my opinion. the Bc8 seems like much smoother on the articulation of the suspension.
it is possible to improve it quite a lot. Plus 1.9" wheels are a huge improvement, with more off-road biased treads.. I swapped some of the rubber bushes for metal, see my channel if you have time.
I managed to get the 1/16 and then I saw this one “DAMMIT “ already upgrades for my little Hemet , but I love this one ! I like the box 📦 one but I like the tan color to be on this one , I see me owning this w a sensored brushless you know if you gotta go n go slow to !
@@AnthonyGonzalez-lw1ek i really like the cross rc 1/12 collection, i'm having problems with their motor, as far as i know, they are powered by a 550 can, but has a seperate smaller motor that runs the realistic motor fan, i don't like it because they make a constant whining sound when the rc is on and it's pretty noticeable, even with a speaker. i like my hemtt p803 because the motor that powers the shaft, also powers the fan so there is no smaller motor making a loud whining sound when your rc is on.
hope all is well. i saw another guy with one of these ( with the dump bed like yours ) , and it did not have locked diffs and it was getting stuck everywhere on rocks and in sand, is yours completely locked ? i dont want to spend that much money on an 8x8 and having it getting stuck like that other guys, thanks for the great videos. please let me know thanks so much.
It's a beast for sure I won't get it from bangood at all everything I have ordered from them takes for ever to turn up if it turns up at all its not a good company lol but I will buy one of these once I have some room and money and have sold some of my other rcs
This maybe a silly question . But these new 1/12 super articulated Military figures Do you think there is room inside the cab to fit a driver? Just Curious Like a Mezco 1/12 something with some bendability?
For the price it needs softer and more flexible suspension, and the speed in low, let alone high, needs to be more scale. How proportional is the speed control? It looked a little jerky going over obstacles. Am I being picky? Well it's a lot of money!
This is amazi amazing absolutely awesome really looking forward to you getting into this build. I know it was all the modifications and know-how that you have upstairs in your melon I'm sure you're going to turn this into something quite awesome! One question though brother are you going to keep it military?
Hey bro , Thanks for video and cool review!! 👍💪...i would ask you, am planing to get one of 6x6/ 8x8 and am between option of trx6 or this version of HG. According to your experience Which is better for mountain's and routs crawling... And plz if you can confirm this rig of the HG can accept strong brushless combo like Hobbywing Axe 3300kv with no issues. Thanks a lot bro. Greeting from a Syrian in Europe.
Has walking beam suspension. Cool. Thrre id a goose neck flatbed trailer for it. $550 i brleive it is. Truck is $550 as of 1/23/21. After seeing this im orderinf ot. Was on the fence between this, Humve, or tje Abrams tank. This os next.
Its not as complex as it looks, it did come with a set of extra cables but there are a lot of parts for it available on ebay right now. I ordered the sound module.
how would you say this rig sizes up (aprox) to the bruder 1/16 scale, Id like to add it too my line up of conversions.. I have been doing my research on this rig and want too buy it..
I agree the 1/12 scale is a tuff one too match.. I ahd no idea banggood was selling this.. I have found them on ebay a bit cheeper..I have good luck w/ banggood plus i could use the coupon codes etc that will drop the price 8-) @@RCeveryday
Hey Ron! I have the hg P601, bought with the idea of putting it into a bruder dress, okay the 601 is not like this it is 1/10. But that scale comes from a lot smaller vehicle. Still it is to nog. Then again, Reading the specs for this monster i do not want to scrap the idea just yet. I will have to se if this thing, or rather one of this brothers will have to relocate to chilly sweden😋 I just found this truck and got the itch right away and get that you got the same. 😉👍👍 Haha lets go..
You charged the battery with a wall charger, surely someone with your experience would have used a proper charger, take 20 mins or so, instead of hours. Anyoldhoo, really nice rig, but a wee bit too expensive for my taste, I've a chopper motorcycle that needs my $s at the moment.
It was good in the beginning. They kind of got weird after my handler changed 3-4 times. All they want to offer me now days are the toy grade rc that don’t really fit within the channel.
Take a shot everytime he says "metal". You might as well call an ambulance before you start. This thing is built! 💪🏻
I watched this video a few times and finally decided to bite the bullet to buy it as 'The Boss' gave me permission to get it provided I build her an rc to her specs 😄. Then I saw they made the P803A model and had a tipping bed. I knew I had to get that version 😎👍. Can't wait to get it. Awesome review on this truck. I'm sure I'll be acting the same as you when I get mine,lol
Damn this truck is impressive. Very scale and the storage/carry case is a nice touch. Cheers !
Brushless and shock upgrade!
'
hi O L...
better normal brush motor...
not good idea use a brushless motor
I think 1.9 crawlers are a must
Hi I have just brought the p801and the p802 can’t wait for them to come I have two make sure I got the battery fully charged and ready to go so I can have a really good play
I have the P801 and P802 and run them on a 3 cell 11.1v lipo and they really get up and go!! the speed controller is good for upto 12v you should try it ...even more fun!!
It would make a very interesting RC model to build entirely from bags of parts. Full build. But that would probably take several nights. It took 8 hours just to lube the road wheels on my Tiger 2 tank (because you have to be insanely precise). I enjoy that stuff more than running them sometimes, because I don't like getting the paint and details roughed up.
Yes, there are actually two trailers available for the 802 truck.
That is a nice rig !!!!
I bought the cross rc bc8 mammoth. It's a 1/12th MAZ 537. All metal chassis driveline suspention. Sound and lights, it's so fokking awesome! I think its much better then this hg p801 but also more expensive
Very cool sir. That thing works well. Thanks for sharing it.
I may never be able to afford one, an Banggood won't just "send me one".... (I'm too grumpy I guess).
But *DAYUMM*!!!!! 😱😱😎👍👍🍻🍺
That thing IS a Beast! I want on so bad.... won't happen. 😫😞
I do look forward to seeing your touch on this Rig!!
Carmine 💥 ⛽
Crazy wheelspeed in 2nd for a big truck! Can't wait to see the weathering job you do. Have a happy new years!
What motor and size ESC does it have? Enough room to upgrade the motor to a 500 size?
I have the HG P406 with a Traxxas Stinger 500 size motor.
Now, AFTER watching the video, I am impressed. Looks like a 550 Titan or equivalent motor.
I saw this advertised on EBAY or somewhere? And the specs they gave were TOTALLY different than what I see here.
This deserves a Brushless set up.
Nice Truck, and running video. I think 800 is a good price for what you get. To build one from scratch would be a lot of work.
Awesome video, and awesome rig. Every scratch and when you repaint is going to add realism because they won't match perfectly. If you want to make the body have a pop factor to it you could do a dark wash. That would probably take it pretty far. Can this truck fit a axial scx10ii in the back of it? Even if you have to lay the sides down, that would be ok too. I can't wait to see where your vision takes you with this one.
👍Will have to get this on my channel thanks. Been waiting for this before I pull trigger..
Looks good but would look better after weathering
You prolly dont give a shit but if you are bored like me atm you can watch all of the new movies and series on InstaFlixxer. I've been watching with my girlfriend during the lockdown xD
@Kase Ezekiel definitely, I've been watching on instaflixxer for since december myself :)
@@kaseezekiel4321 lmfao bots replying to a 2 year old comment ffs RUclips needs to do something about them
Awsome unboxing.Would look even better adding weathering details.Thanks a bunch for sharing.Wishimg you and your family a wonderful New Year.
Oh. I forgot to mention.
It REALLY, well, all RC trucks, cars and most boats need driver figures. They make some 1/16 and 1/12 scale possible military figures that need a ride.
Great review I just ordered the Hummer H1 can't wait to get it.
Hey greatings from Sweden, you got your self another subscriber tonight. Just found you and seem to be all in just from watching the setting where you are filming with that shop all to scale.
Thank you for this video, like i said to mr ThatsmyRc, i think one of those will have to move to sweden soon.
Awesome, keep it up😀👍👍👍
You seem very happy with this new truck... Enjoy & Happy New Year to you!
cross rc does a trailer for the mamoth which is like the 802 so might fit
That thing is a beast! I need to get my sales up next year so they send me one! 😂 Nice video...look forward to seeing it weathered 👍
seems like the articulation for the suspension still bit hard. perhaps if soft a bit it will much better with less tires hang on the air.. just my opinion. the Bc8 seems like much smoother on the articulation of the suspension.
The BC8 cost about three times as much, and the HG has solid axles, the BC8 independent suspension. Of course the BC8 is better
it is possible to improve it quite a lot. Plus 1.9" wheels are a huge improvement, with more off-road biased treads.. I swapped some of the rubber bushes for metal, see my channel if you have time.
I managed to get the 1/16 and then I saw this one “DAMMIT “ already upgrades for my little Hemet , but I love this one ! I like the box 📦 one but I like the tan color to be on this one , I see me owning this w a sensored brushless you know if you gotta go n go slow to !
i did the same thing, i ended up getting the p803, and now i think im sticking to the 1/12 collections
@@tydevries9027 I recently saw that looks like it’s a tanker truck I’ll find the vid it’s running with a couple of Russian trucks
@@tydevries9027 BC8 by TANKORC REALLY GOOD
@@tydevries9027 have you seen the Hemet with the tanker , in 1/16 vid I think “tankorc” that thing looks sharp
@@AnthonyGonzalez-lw1ek i really like the cross rc 1/12 collection, i'm having problems with their motor, as far as i know, they are powered by a 550 can, but has a seperate smaller motor that runs the realistic motor fan, i don't like it because they make a constant whining sound when the rc is on and it's pretty noticeable, even with a speaker. i like my hemtt p803 because the motor that powers the shaft, also powers the fan so there is no smaller motor making a loud whining sound when your rc is on.
It's a HEMTT Heavy Expandable Mobile Tactical Truck
Yes, closest real truck to this RC would be the M977PP as the other rigs like that have a crane on the rear.
'
hi R B...
american company can make it own R/C military trucks
just got one, waiting on the mailman.
awesome, but what about replacement parts? readily available?
They are, found them on ebay all over as well as banggood.
Nice job bud! This thing looks so cool!👍👍👍 Have a good new year!
Drove one in the Gulf War MLRS unit
hope all is well.
i saw another guy with one of these ( with the dump bed like yours ) , and it did not have locked diffs and it was getting stuck everywhere on rocks and in sand, is yours completely locked ? i dont want to spend that much money on an 8x8 and having it getting stuck like that other guys, thanks for the great videos. please let me know thanks so much.
Mine is not locked either. Not sure what it’ll take to lock these axles. I haven’t had to rip one apart yet.
Holy wow!! My GI- Joe's would be riding in style.... Happy New Year buddy!
thank you for this, been waiting for someone to investigate this
i am about to buy this awesome truck
Sweet 👍 ,,,
Happy New Years brother 👍
Super video!! The truck is awesome!! I ordered a HG P801 8x8 truck this week. Did you lock the differentials yourself?
No they come locked already.
@@RCeveryday Really? I didn't know that. I am curious. Thank you :)
Happy New Year
Great review ;) truck looks perfect ;)
Nice friend good RC truck, be your fan 🥰🥰🥰
it looks a bit new for you :) it needs some weathering.
It's a beast for sure I won't get it from bangood at all everything I have ordered from them takes for ever to turn up if it turns up at all its not a good company lol but I will buy one of these once I have some room and money and have sold some of my other rcs
This maybe a silly question . But these new 1/12 super articulated Military figures Do you think there is room inside the cab to fit a driver? Just Curious Like a Mezco 1/12 something with some bendability?
That is so cool! Are you going to do any weathering paint on it?
How do you find this version. I don't want the old stick controller I want this one with the pistol grip radio.
You need one of those 2 bladed helicopters to take it out of the box
That’s just cool as hell man! Badass! 👍👍🤘✌🏻
Or make it a Paris Darker racer !! W some kind of rear modded box 📦😅🤣🤣🙃
For the price it needs softer and more flexible suspension, and the speed in low, let alone high, needs to be more scale. How proportional is the speed control? It looked a little jerky going over obstacles. Am I being picky? Well it's a lot of money!
Out of my price range but i have been looking at these for quite a while now.
Yeah, we had the M985 w/crane
Looks like a pretty sweet rig Brother. Always enjoy your unboxing's & review's. Have a safe & Happy New Year with all the best going into the future.
I want one NOW!!!!
In the Corp the non-military designator or nickname is/was “Dragon Wagon”, in my day.
This is amazi amazing absolutely awesome really looking forward to you getting into this build. I know it was all the modifications and know-how that you have upstairs in your melon I'm sure you're going to turn this into something quite awesome! One question though brother are you going to keep it military?
I think i will keep it military, just cant see it any other way.
Plastic wheels glued? Nice vid!
It's modeled after the Army's HEMMIT, a equipment transport.
Hey bro , Thanks for video and cool review!! 👍💪...i would ask you, am planing to get one of 6x6/ 8x8 and am between option of trx6 or this version of HG. According to your experience Which is better for mountain's and routs crawling... And plz if you can confirm this rig of the HG can accept strong brushless combo like Hobbywing Axe 3300kv with no issues. Thanks a lot bro. Greeting from a Syrian in Europe.
It's nice, but for that price there shouldn't be a single plastic part on the outside...
Awesome truck :)
Did you find out what the reel of twine was on the chassis?
No, my only guess is some sort of winch maybe
Tie the load down!
Has walking beam suspension. Cool. Thrre id a goose neck flatbed trailer for it. $550 i brleive it is. Truck is $550 as of 1/23/21. After seeing this im orderinf ot. Was on the fence between this, Humve, or tje Abrams tank. This os next.
Hello! I bought it from GeekBuying, and it cost me a lot less ...
I would like to see you make the bed removable and ask.le to add a tamiya semi truck fifth wheel so it can pull the tamiya trailers!!!!
The HG P802 comes in that configuration already. I think tamiya semi trailers would look a little small with this though.
'
hi C M...
i did homemade two R/C trailers for tamiya and traxxas
Not to throw hate at bang good but my experience with them is subpar
The steering looks insanely complicated to setup.
How's part support for it?
Its not as complex as it looks, it did come with a set of extra cables but there are a lot of parts for it available on ebay right now. I ordered the sound module.
RC Everyday I just made a huge purchase. A Mammoth a PG4L. That almost hurts my stomach. haha
I love the truck
What prices. Of that amazing track
Can you please tell the link from where you BUYED this
put it up on your scale hoist
These things swallow mud flaps. So that's also accurate to this model.
Like I don’t like the idea of not having the battery with it that’s the only problem how much does it cost
how would you say this rig sizes up (aprox) to the bruder 1/16 scale, Id like to add it too my line up of conversions..
I have been doing my research on this rig and want too buy it..
I think it would look a bit big with 1/16 stuff. 1/12 is kind of an odd scale to fit, seems like everything is either 1/10 or 1/14
I agree the 1/12 scale is a tuff one too match.. I ahd no idea banggood was selling this.. I have found them on ebay a bit cheeper..I have good luck w/ banggood plus i could use the coupon codes etc that will drop the price 8-) @@RCeveryday
Hey Ron!
I have the hg P601, bought with the idea of putting it into a bruder dress, okay the 601 is not like this it is 1/10. But that scale comes from a lot smaller vehicle. Still it is to nog.
Then again, Reading the specs for this monster i do not want to scrap the idea just yet.
I will have to se if this thing, or rather one of this brothers will have to relocate to chilly sweden😋
I just found this truck and got the itch right away and get that you got the same.
😉👍👍
Haha lets go..
You charged the battery with a wall charger, surely someone with your experience would have used a proper charger, take 20 mins or so, instead of hours.
Anyoldhoo, really nice rig, but a wee bit too expensive for my taste, I've a chopper motorcycle that needs my $s at the moment.
I do have a better charger, but I can t find the connector for the balance port. lol
Hey man, random but banggoodreached out to me to try out some products and do some reviews. Did you enjoy your experiences with them?
It was good in the beginning. They kind of got weird after my handler changed 3-4 times. All they want to offer me now days are the toy grade rc that don’t really fit within the channel.
RC Everyday that was the same wall I was crashing into with them. Wish I could get the 8x8
Massive,how big is it compared to a rat rod
I put a pic of it next to one in Instagram. It’s nearly a foot longer than the #2 ratrod truck.
Very cool to see, keep up the great work. I know it’s just the beginning. Have a great New Year, take it to the rc world!
Rock On\../\../
This truck is compatible with g.i joe classified?
It could work with the smaller figures
@@RCeveryday thanks bro
what cost is it
The price has gone down now to around $550
It scales well with marvel legends?
I Like this truck❤❤❤
Price
It's a HEMTT replica it is cool I have one 😉👍
What is it rate
Looks good real scaled would be cool if you had a tank to go with it I see why it’s $ 800.00
needs rims/tires!! mine got some gmade steelies and bfg ko2's and some tamiya diff putty.... 100000% better...
800$ holly crap
Do you still like it? Does it still work?
Yes it still works great, and I like it. It’s really a quality rig.
@@RCeveryday Sweet. I just purchased some Chinese knock-off for a hundred bucks shipped. lol We'll see if it's any kind of legit or not.
Uhhh...Bro, 800 Bugs for something from Banggood 😨...you got some balls..😂
They have a 25% off code for this truck now too. Lol. It’s good quality. I am not disappointed in it one bit.
Atleast they’re $550 now. That’s a decent deal
Do they have aftermarket parts?
There isn’t much for accessories but replacement parts are available
amazing 👏👏👏👏👏👏👏👏👏👏
58 CHEBBY BABY
'
what country made this R/C military truck 8x8...
american R/C company can making any own R/C military tanks and trucks
HEMTT ""Heavy Expandable Mobile Tactical Truck"",
but still this gonna in my wish list too...
'
hi R H...
try own home make R/C military truck
nice
its WAY cheaper on Asiatees
Will a tf2 fit in the back
The bed is not quite wide enough for a tf2