Gen5Diy has the same one’s for $300 and you don’t gotta do all that wiring. It’s just a harness you plug into the headlight and the fog lights come on with your headlights and with better bulbs
This has to be the sloppiest nonprofessional install I have seen in my life. Relay upside down held in with a push pin. Spaghetti wires everywhere ran across the engine with no care. Fire hazard waiting to happen. I’m ashamed I even watched this video.
Your installation is incorrect and actually dangerous. You have run a wire directly from the battery, through the firewall, and to a switch. This then runs both to a ground and back through the firewall to a relay. If you are wiring in this fashion, you need to have a fuse on that wire. Surely the manufacturer of these lights intended a different installation. (A set I received for my truck recommends pulling switch power from a fused source inside the cab; this also means that only one wire has to run through the firewall.)
Installed a very similar kit and everything works fine. Only thing is the red indicator light on the light switch stays on all the time. The fog lights themselves aren’t on, but when you turn the car off the fog light switch stays on. Is this normal?
Trust me,trust me, trust me if you’re going to do this please do yourself and favor and go get the Gen5DIY harness kit. This is the worst way to wire it and worst set up of the lights Made. 0/10 would never recommend.
$242 for these seems excessive. You can find the same exact ones on eBay for under $100 with the same harness.
Gen5Diy has the same one’s for $300 and you don’t gotta do all that wiring. It’s just a harness you plug into the headlight and the fog lights come on with your headlights and with better bulbs
Just order two sets for my truck and my wife's
This has to be the sloppiest nonprofessional install I have seen in my life. Relay upside down held in with a push pin. Spaghetti wires everywhere ran across the engine with no care. Fire hazard waiting to happen. I’m ashamed I even watched this video.
I was thinking the same thing!!
Your installation is incorrect and actually dangerous. You have run a wire directly from the battery, through the firewall, and to a switch. This then runs both to a ground and back through the firewall to a relay. If you are wiring in this fashion, you need to have a fuse on that wire. Surely the manufacturer of these lights intended a different installation. (A set I received for my truck recommends pulling switch power from a fused source inside the cab; this also means that only one wire has to run through the firewall.)
That’s what I was thinking… that wire is hot at all times coming into the cab. Not exactly something you want to have!
I was thinking that as well.
Yikes. That wire management is atrocious.
Installed a very similar kit and everything works fine. Only thing is the red indicator light on the light switch stays on all the time. The fog lights themselves aren’t on, but when you turn the car off the fog light switch stays on. Is this normal?
Seems like a waste since these guys never respond to any posts.....
Hey buddy any videos for a 2018 sierra that came no fog lights..!??? Please 🙏🏽
Awesome video guys thanks
Thanks for watching! -Zach
That was sloppy !
Pinche corto circuito
OEM Style Full LED Fog Lights with a Clear lens available for sale at amtrucks.at/3Ipcj3u
What was the need for the yellow one and where does it go to on? You lost me there
Can a splice the blue wire with 22guage also, since its not long enough either?
Lmao wondering this today
Trust me,trust me, trust me if you’re going to do this please do yourself and favor and go get the Gen5DIY harness kit. This is the worst way to wire it and worst set up of the lights Made. 0/10 would never recommend.
GEN5DYI Much better solution - this is a hack install