Christine. ......that was my favorite movie as a kid......I like where the fat guy gets crushed by the power seat.......and when she would lock up and play the oldies......you knew shit was goin down then, that movie is the shit!!!!!
its so kool seeing you guys getting this stuff from the same folks i think are the koolest .. especially ol ken coates Waylon wire... found him 10 yrs ago lives by my moms.. but across the border
All the hard work is paying off. Looks like a shortbox C10 but acts like a wolf in sheep's clothing. Nice sleeper! Diggin the progress. 👍 Cheers from Saskatchewan
Your almost there Dan ,things are well on the way.At a craft store not to far from you folks is a Christine plastic car model Danni could build while your busy in the shop.I saw the movie in the theater years ago .More scary but not near as much fun as you guys!
Dan, you give me hope, I have watched you rebuild three cars in the last few months, and I only have one to do, plus I do not have nearly as much to do on mine (last famous words), so anyway keep it up, I look forward to the videos
It's alive.... That's badass. Can't wait untill you turn that key and let et eat.. Way awesome great job.. Keep those wrenches a turnin and the tires on burnin.. Your almost to the finish line buddy.. Then you'll be busting on that T.. Keep on turnin.. And keep up the great work and vids.
Presents are the coolest thing in the world Mrs DD says. !!! Ugh Yea.!!! Luck with all those wires. GM website has a complete LS n Auto Trans swap kit with computer. Only costs like a $Million dollars. I like your way better.
And here I thought with all the new equipment the days of the shade tree mechanics were over... I'm a fan of anyone that can take nothing and make something good! Congratulations!!
Planning on underhood lighting with those LED bulbs on the cowl vent? heh, heh, heh! OOoooh! Even if it was non-functional...a Cowl Induction scoop would look so cool on that gigantic hood! I had a teardrop scoop on my '65 Galaxie...I know about gigantic hoods! haha! It's lookin' great, Brother! Keep up the good work! Gettin' anxious to see it out on the blacktop!
I have a 2000 GMC jimmy SLE with a 4.3 I put a comp performance cam in..it would barely run turns out I pinched the intake gasket putting it back together...I felt so stupid..it ran like a dream when that was fixed right
Seal all is awesome stuff. I fixed a dripping gas leak on a tank with it. Held the seal all on my finger onto the hole where the gas was dripping from and it stopped it.
i ll be sure to watch the adds so you can get a taller shop with a lift! at least be able to put your hood on with the door open! love the videos!thanks for bringing us along!!!
Have a 67 C10 love the way it drives. Other than the granny low + 3 speed noisy. So I've been thinking about changing it to automatic. But my frame is a little sketchy. So I've been thinking about LS and frame swap together. Just like the way it drives now. Don't know if I'm ready for the LS bandwagon yet.
Another episode or two and the old C10 will be crusin down the road. I never gave much thought about LS swaps and I know its a lot of work, but you sure make it look easy. Nice Job.
Hey!!! It runs. I'm not gonna lie I was worried about Dee and using the razor blade. What I do Dan is use a wood burning tool and zip ties as welding rod for a plastic weld. Works good for me. Glad to hear it run. Great video
With you getting the "Christine" DVD, is that a hint that your next project will be a Plymouth Fury? The Fury was a big car, 17.17ft long and 6.6ft wide. Would it fit in your garage?
Hey Danny, Nice to hear it run even if it was only a couple of seconds. The fact that it runs is great. Won't be long before you can use it to pickup your next buy. lol Later
Coming along good and wont be long before you can give us a smoke show . Waylonwire (Ken) is a amazing man . He builds kool RatRods and can carry a tune . Ive been watching him for years . Thanks for all the hard work and videos.
I asked you about the fuel lines because my 57 Chevy Panel caught on fire from the alcohol gas damaged the fuel filter o rings. We saved the truck. Because the tank is in the cab I was concerned. Thanks for the videos you guys are great.
YEAH. What we been waitin for. Be lighting them up before we know it at the rate you're going. Computer probably needs to figure it's self out. Awesome progress.
Buddy I don’t know how you get so much done so fast I’d better get out of the recliner and get back to the Cummins swap lol ....truck looks great and lots of power for the light short box ..👍
Another great video. Thanks so much for responding to our requests for product info, pics etc. Plus just acknowledging practically every post, you're a class act.
Sweet job man! Its coming along great! Watching your speedy progress on projects has motivated me to get out in the shop and finish up my Dart Sport so thanks for that!
Did you delete the maf sensor? If thats not plugged in, it will run funny. I changed the intake gaskets on my lm7 5.3, and it ran like crap afterwards. Took about 20 minutes of driving before it was back to normal. Thinking that it has to go through drive cycles to relearn or something? Anyway, great video as always.
That was like today I cold started my f150 after sitting for 6 weeks in the cold. Started right up... doesn’t make for a good video. It’ll be cool to see this thing actually run and drive
My favorite movie any car guy gotta love christine
Christine. ......that was my favorite movie as a kid......I like where the fat guy gets crushed by the power seat.......and when she would lock up and play the oldies......you knew shit was goin down then, that movie is the shit!!!!!
You get extra credit for being out there in the garage during the cold weather! :-)
its so kool seeing you guys getting this stuff from the same folks i think are the koolest .. especially ol ken coates Waylon wire... found him 10 yrs ago lives by my moms.. but across the border
I really like those old trucks.
Your easy to please.
All the hard work is paying off. Looks like a shortbox C10 but acts like a wolf in sheep's clothing. Nice sleeper!
Diggin the progress. 👍
Cheers from Saskatchewan
thanks ray! its getting there. hard stuff is all done
Truck sound good
We are stoked right along with you. Minty.
Hell yeah!
Its looking& sounding good!!...& Yes yll like The movie Christine lol...
Your almost there Dan ,things are well on the way.At a craft store not to far from you folks is a Christine plastic car model Danni could build while your busy in the shop.I saw the movie in the theater years ago .More scary but not near as much fun as you guys!
haha you know where everything automotive related is my friend
Dan, you give me hope, I have watched you rebuild three cars in the last few months, and I only have one to do, plus I do not have nearly as much to do on mine (last famous words), so anyway keep it up, I look forward to the videos
Right on!
It's alive.... That's badass. Can't wait untill you turn that key and let et eat.. Way awesome great job.. Keep those wrenches a turnin and the tires on burnin.. Your almost to the finish line buddy.. Then you'll be busting on that T.. Keep on turnin.. And keep up the great work and vids.
haha yeah, im ready to wrench on the T a little more
Presents are the coolest thing in the world Mrs DD says. !!! Ugh Yea.!!! Luck with all those wires. GM website has a complete LS n Auto Trans swap kit with computer. Only costs like a $Million dollars. I like your way better.
Haha yeah you can spend the money that's for sure.
cool it stared up like see it do a burnout
im sure it will
Sounds good
thanks
Nice man your hardcore
And here I thought with all the new equipment the days of the shade tree mechanics were over... I'm a fan of anyone that can take nothing and make something good! Congratulations!!
thanks terry!
Mechanics are far and few....I always find parts changers for the most part. The something out of nothing is more of a art form nowadays.
Terry Shaw oh we’re here.. I rebuilt a truck in my driveway over the course of last summer
You should sell a T-shirt with your catchphrase Pretty simple on it. You seem to say that a lot. Great video’s.
Planning on underhood lighting with those LED bulbs on the cowl vent? heh, heh, heh!
OOoooh! Even if it was non-functional...a Cowl Induction scoop would look so cool on that gigantic hood!
I had a teardrop scoop on my '65 Galaxie...I know about gigantic hoods! haha!
It's lookin' great, Brother! Keep up the good work! Gettin' anxious to see it out on the blacktop!
haha i do like custom lighting and im a sucker for a hood scoop
I have a 2000 GMC jimmy SLE with a 4.3 I put a comp performance cam in..it would barely run turns out I pinched the intake gasket putting it back together...I felt so stupid..it ran like a dream when that was fixed right
This was a runner and I never opened it up. So I assume I messed up the wiring or somthing haha.
1st start, cross that off, next up INDOOR BURNOUTS!!! Well, after a bit more wiring & plumbing & routing & tightening. Then INDOOR BURNOUTS!!!!!
all about indoor burnouts!
i was just given a 1985 chevy shortbed im gonna make a ratrod out of it
T WRECKS ..T WRECKS ..WE WANT T WRECKS 🏆
Christmas time....
Hi Dan. Danielle looks beautiful, decked out in zip ties apparel. And Waylon stuff too! Lots of work on the truck. Good stuff.
yeah shes a fan of free stuff haha
Seal all is awesome stuff. I fixed a dripping gas leak on a tank with it. Held the seal all on my finger onto the hole where the gas was dripping from and it stopped it.
haha science in a tube
i ll be sure to watch the adds so you can get a taller shop with a lift! at least be able to put your hood on with the door open! love the videos!thanks for bringing us along!!!
haha yeah, gotta work with what i got
@@DDSpeedShop i feel your pain i finally got out of the gravel and on to cement.
She lives.....
Great work Dan
Ooooooooo!!!! Christine!!!! I play it with the sound playing thru my stereo!!
No sparks, no flames, no fires, no problems!!! Its coming along fine!!
haha its getting there
@@DDSpeedShop you keep plugging away at it, it'll be a driver real soon now...Good job!
Have a 67 C10 love the way it drives. Other than the granny low + 3 speed noisy. So I've been thinking about changing it to automatic. But my frame is a little sketchy. So I've been thinking about LS and frame swap together. Just like the way it drives now. Don't know if I'm ready for the LS bandwagon yet.
yeah once you start you cant stop haha
@@DDSpeedShop you and half ass might have to start holding LS anonymous live chats. LOL
Your drummer performed just the right music for the dramatic opening of packages !
haha yeah
STOKED !!! 1 STEP CLOSER TO BURNING RUBBER YES !!!! THANKS !
It's alive, it's alive the beast has come alive!!!😆😃😄😁😀😄😊
finally!
I have a 68 Chevy that I parked about 20 years ago, been planning on getting it going again, love these videos they give me hope 👍👍
Do it Bro, you only live on earth once, when you finish it you will so stoked...Trust me...Peace and pedal to the metal....
@@andya857 thanks, I think I will 👍👍
Nice! Get out there and start wrenching
Trucks looking 👍
thanks buddy
Another episode or two and the old C10 will be crusin down the road. I never gave much thought about LS swaps and I know its a lot of work, but you sure make it look easy. Nice Job.
Yeah I only did it cuz I think itll help he resale.
Waylon Wire and ratrodbob are both great guys ,along with halfass kustoms, Jonathan w , my favs
cant agrue with that
Love the "running, driving, stopping" approach to your builds. Projects are much more fun when you dont have to push them!!
Hey!!! It runs. I'm not gonna lie I was worried about Dee and using the razor blade. What I do Dan is use a wood burning tool and zip ties as welding rod for a plastic weld. Works good for me. Glad to hear it run. Great video
haha yeah shes a safety hazzard
Oh those rear tires are gonna be spinning wildly
im hoping so haha
Steve likes the swag!
yeah he likes packages
It's alive, cool.
Finally haha
With you getting the "Christine" DVD, is that a hint that your next project will be a Plymouth Fury? The Fury was a big car, 17.17ft long and 6.6ft wide. Would it fit in your garage?
Soon!
So very soon
Looking good bro. I've watched ol Ken build them hot rods for about 10 years I like him.
Yeah hes a cool cat
Hey Danny, Nice to hear it run even if it was only a couple of seconds. The fact that it runs is great. Won't be long before you can use it to pickup your next buy. lol Later
haha oya im always looking for the next one
It's running somewhat it want be long you will have it running around town. Keep up the good work ! 😎
Yeah I'll figure it all out
Coming along good and wont be long before you can give us a smoke show . Waylonwire (Ken) is a amazing man . He builds kool RatRods and can carry a tune . Ive been watching him for years . Thanks for all the hard work and videos.
I asked you about the fuel lines because my 57 Chevy Panel caught on fire from the alcohol gas damaged the fuel filter o rings. We saved the truck. Because the tank is in the cab I was concerned. Thanks for the videos you guys are great.
thanks for watching and your concern
Truck is looking awesome
Big Bang for the bucks.
yeah so far its pretty cool!
Liked commented and im subbed
Love your videos and projects. Equally admire your "stick-to-it-tivness" in working steadily on the builds while having a full time job.
Brought back from the dead,Sounds good it's alive,Going to be a great truck again.
yeah itll be a sweet unit
Steve is the reason why I’m here , then the builds . Sounds good Dan keep up the great work . Cheers
haha steve has his own fan club
Look at you go, good job
Thanks!
YEAH. What we been waitin for. Be lighting them up before we know it at the rate you're going. Computer probably needs to figure it's self out. Awesome progress.
yeah im not to sure about these ls motors haha
Hurray, at least it started,nice to see thanks
haha yup!
Sounds like it’s gonna run pretty good!
should be good
love the c10, cool truck cool project !
Thanks buddy!
Buddy I don’t know how you get so much done so fast I’d better get out of the recliner and get back to the Cummins swap lol ....truck looks great and lots of power for the light short box ..👍
Haha I dont do much else
Another great video. Thanks so much for responding to our requests for product info, pics etc. Plus just acknowledging practically every post, you're a class act.
I do my best haha. I appreciate all the support I get from you guys!
It's alive! Making great progress man! I love to see C10's hitting the streets!
yup! another one saved
Ya know you're someone when ol Waylon Wire sends ya something.
hit the big time!
Enjoyed
Your the man Dan, it'll run just fine when your done.
im hoping so
Steve!!
haha yup
@@DDSpeedShop was good to hear it fire up
Sweet job man! Its coming along great! Watching your speedy progress on projects has motivated me to get out in the shop and finish up my Dart Sport so thanks for that!
Did you move the battery box to the drivers side?
i did
Nice! Wasn't sure if that was a option on those trucks or not
@@jeremystitt5350 I dunno it it was or not haha. But it fit and made my life easier with the motor swap
sweet
Glad to hear run... instant die sounds like big vacuum leak but just guessing. Money in the bank
yeah gotta be somthing simple
Awesome!👍🏻
Great job and Another great video 👍👍👍🇨🇱
Liked the hood install music. Nery surfy
Lol it was supposed to read "Very surfy" just call me stupid fingers where my typing is concerned.
Rad hair!! 🤘🏼 and cool looking dog but I thought all Canadians had cats lol
Your dog is named Steve? Hilarious!
Yeah hes a good guy.
Hey Dan and Daniel how are you guys great video! Always look forward to watching them! Keep up the good work
Are you from Texas?
nope
Did you delete the maf sensor? If thats not plugged in, it will run funny. I changed the intake gaskets on my lm7 5.3, and it ran like crap afterwards. Took about 20 minutes of driving before it was back to normal. Thinking that it has to go through drive cycles to relearn or something? Anyway, great video as always.
maf was hooked up, i gotta give everything a once over
Thanks for the update! Ol girl is about to be ripping it up! 👍👍👍👍
yup!
Hi again Dan. I was just wondering about the wiring. Does the truck still have a diagnostic plug in port? Can you still scan for codes?
Doggie what his or her name
his name is Steve
J6st like Christmas know you know it fire up once dialed in
Coming along nicely. I have to admit I just love that t Rod looking forward to your follow up video of it. DD speed shop rocks. 👊✌
Thanks buddy!
Love it
thanks buddy
Cool! Love that you’re working in your home garage…gives some hope to the rest of us schlubs lol
I do my best
Nice !
That was like today I cold started my f150 after sitting for 6 weeks in the cold. Started right up... doesn’t make for a good video. It’ll be cool to see this thing actually run and drive
Yeah hopefully sooner rather than later haha
It has to relearn
yeah i had those thoughts
It's in the land of the living!!..great job keep it up...enjoy the Christine DVD...hope to see you doing a Plymouth Fury next..😂😂...
haha i dunno about that
Well...It’s a car that kills people....lol
they had it coming haha
Remember its gotta make it to florida ...lol
on a flat deck? haha
@@DDSpeedShop I want to drive it lol
doing great! im learning a lot!! :o) ☺
awesome!
“Oh no!” Super Canadian... Lol
You have some good RUclips friends, all my favorites!
i cant complain haha
#237 March 01 2020 11:04 AM 🇺🇸🎩
Hopefully Truck Will Start Without Any Trouble... Danielle Is like kid opening gifts
yeah she sure is haha
IAC valve is bad.
Hi Steve
one more video and you should be doing donuts in some snow to break it in.
haha or just break it
Needs a scoop . Haha
i know right!
Killer ....Peace....
Thank!