1971 Nova SS gets a Muncie 4 Speed!
HTML-код
- Опубликовано: 26 окт 2019
- I've been hard at it! Motor and transmission went back together and I manager to stab them in the car. Everything fit shockingly well! Now I'm down to all the tedious little things that take a pile of time. Linkage, brake lines, belts ect. Leave a like, let me know what you guys think! As always fellow along on Instagram @ddspeedshop
Авто/Мото
Thanks for watching guys! Don't forget to leave a comment and subscribe to the channel.
Great job! I enjoy watching your videos. I have a 55 Chevy I am working on. Slow but sure.
A 4 Speed Nova , That is going to be So Much fun . You gonna really like it .
nice!
Message me I’ll trade your shifter for mine which is a nova one
@@DDSpeedShop Thanks Danny. On a side note, do you have a tach in your 55? Where did you hook up the red wire? I am having an issue with mine. Getting frustrated.
Great video, it brings back memories from the 60's when I was changing engines, and transmissions in my 57 Chevy. Those were fun times. I will be 72 in December, and it does take me a little longer to do things due to Father Time, but I still enjoy working on the old stuff.
thats awesome! I hope I'm still wrenching when I'm 72. Maybe not quite so hard though.....
Add one more like! A V8, add a muncie, why not like it! Your living the American dream there bud, I love it!
Today Is Saturday Watching You Work On Your 71 Nova install the engine......
04/11/20 1145 am have a great summer
Thanks
Great work, love the retro gold valve covers. You seem to always find time to get stuff done, I must be doing something wrong lol
I'm pretty sure I'm just addicted.....
heck yeah dan the nova is looking good can't wait to hear it run
Great video again. That Muncie is going to make that car awesome. I'll be sure to keep telling my friends about this channel.
I gotta do the same to my 69 Chevelle. Getting parts together now. Doin it this winter coming. Liked ur video
Great stuff...reminds me of days gone by when it was the norm to work on cars..the golden era of hot rods...love your channel...
awesome hard work always pays off keep on trucking!!!!
Another great video. It's coming along nicely...
Great job man, keep on wrenching, it will be done in no time at all! Thanks for the video!..... Stay warm in that garage, I know it's probably cold up there! 😨
I’m enjoying the build. Please keep at it. I really enjoy your videos. I would also love to see you make the 57 into a two door. Loved the 55 build as well!
I just watched these videos after I made the same mistake with that same fork Oooo gosh.So good think is I fixed A couple more mistake I was about to do and you saved me.I watched these videos over the others and were very helpful.Ty ty so much.Hope you car is still running strong.Great work.
I'm actually a Mopar guy...but enjoy watching, because I always work alone and that has its challenges. Keep up the good work !!
Good video ! It's in and want be long now you're be driving it around. But to bad it's going to be winter with snow . Well be looking forward to seeing the next video. 😎
I love watching your videos it looks like me in my garage with everything everywhere lol but we know where everything is also I’m a big four speed guy I don’t really like automatic cars lol keep up the great work
My favorite of all your cars. And like i always say
Doing More with Less and still winning !
Keep up the great work I can remember my 1st 4 spd !! Lots of fun !!!!!
Love a 4 speed!
Great video helped me visualize everything I’m gonna need for the the 350 and Muncie 4 speed I just picked up for my 68 nova
4-speeds are awesome. Overdrive is awesomer. I need one in my Firebird.
Going to be dropping a 69 Camaro 350 into my 57 and this helps me a lot. Keep up the great work buddy
Looking really good can't wait to see this one finished I had a 69 396 4speed nova loved that car sorry I sold it
There is no better feeling to see the motor / trans go in , I like the look of air cleaner and rocker covers . Soon enough you’ll be banging gears . Cheers .
yeah it's always a fun time. Next moment is hearing it run.
Thanks for sharing, you 're not alone when it comes to working in confined space. But we make do with what we have. Great content. keep up the good habits.
thanks man! I appreciate all the support
Hey Danny, Great job bud. Do yourself a favor and when you're in a junk yard or going by a trany shop, stop by and ask if they have a old pilot shaft that came out of any old broken trany (with the right spline) for GM. Most shops will give you a broken one for free and keep it around for installing bushings and clutch alignment. You can also pickup a cheap alignment tool on Amazon for $20 but I would rather have a real one. The best part of having one is you don't have to worry about messing up the bearing installing it. Have a good one bud. Later
Thanks man, I had an install tool at one point, ofcourse I couldnt fine it when I needed..... story of my life haha
I like how you did everything yourself like me. Cool Nova btw
Make some curtains for your garage door when it's down on a trunk lid, snap on ur drapes that extend to the floor and contain ur heat better.
Lot a work. But it will be worth it. Awesome job.
This brings back memories of the '68 Nova I had back in 1972..
haha thats awesome!
Always impressed with what you get done by yourself great job!! Wish i had skills to rip into my nova like that
start taking it apart! best way to learn in my books haha
Another noice video! Keep up the good work mate.
Great video dan , keep up the good work bud !
thanks! Will do
Dang… that scatter shield is a monster! I stayed with the factory style bellhousing on my 79 Malibu but upgraded to a Muncie m-21, and Hurst competition plus for a 65 Chevelle. Fits nice, shifter is on the money!
yeah its a beast! And heavy as hell. Sounds like a bad ass car!
That's gonna be fun with the 4spd!!! Really like the Nova! 👍
yeah its gunna be a fun hotrod!
Looks great.
Nice filming!
Thank you so much for doing this video im building a 68 nova with a 4 speed
Nice! Glad to help my friend
Awesome 👍🏾👍🏾 getting there be awesome when it's done
slow and steady
Doesnt make sense to most people, its all about the sport of manual shifting. Nothing like the sound of a v8 manual!
not bad for doing by your self. good job. love 4 speed trans.
thanks!
I can't believe it DD we're doing exactly the same thing on my car it's like Made For Me video I'm swapping out I got a 427 in mine I'm swap out my automatic transmission and I'm debating on whether to get a 5 or 6 speed transmission I'm doing the same thing you're doing awesome video great help for me
Very nice..do like the gold valve covers and air cleaner...👍
yeah they have a vintage look.
Nice job once again 😀👍
thanks!
Dan when I was a kid my brother's friend he had a 1970 SS 396 375 horse 4-speed it was a fast fast car man it was fun looks good keep up the good videos man loves them all the best😁👍🛠
yeah, those cars were nutso!
Very Sweet. It will be nice
When it gets Done. Bang
Them gears. Then 4 Speed
Great job ! I always have to do it by myself too. But it gets done. Sucks you had to take it back apart but that's the way it goes sometimes.i have trouble walking two feet to sometimes to get the right tools. But you got it done and that's what matters. Have fun at SEMA. Good luck with everything you do brother. Best utuber by far. Would like to meet you sometime. Say high to the misses
Thanks so much! I really appreciate the support my friend! Hopefully our paths cross down the road.
Liked, shared and commented 🍻🤴🏻🗽 19:03
Hey! The Nova is looking great!
I'm sure you'll be driving it soon!!!!
Great job!!!!
Me too! I'm ready to drive it
@@DDSpeedShop you'll get there..I know how you are now, you'll get it done. I hope it's not gonna be used in the winter.
Awesome as always. Have fun at sema my friend!
I'll try! You gotta make it down sometime
DD Speed Shop one year for sure. Right now my sights are direct on Power tour. ;)
@@AutoAli totally! I wanna know the route.
thanks good video
enjoy your youth that work is fun when your young
It's not that fun when your young haha
Great videos wish you were close to NC to help me with my 56 Belair at 74 years old I need any help I can get haha
510 Listeners OCT 28 2019 08:06 AM
🇺🇸 ♿ 😎 🏈 🎃 great job on nova
The new belair project should get a stick too, check out the AR5 swap stuff from fabbot.
04/11/20 12:55 PM ; I Considered You & Danni Long Distance Friends That I Watch What You Work On 🇺🇸😎🎩👍
totally!
I wish I could accomplish 10% of what you do.
Great episode Dan, your going to have a ball with the 4spd. Quick question how cold is it in your part of Canada this time of year
429 Watched You In This Video By 🖐 10/27/19 09:17 PM... I Am Having Carb Trouble Too , cold Temps carb Won't Start. 🇺🇸 ♿ 😎 🏈 🎃 great Job D
At least there the cutouts for a clutch assembly
did you located the bellhousing before you installed it?
Great video. Is the Muncie a M22 (P3E22C)?
What throwout fork did you have to use?
How fast does it run in the quarter?
I LOVE THE 1963 AND THE 1964 CHEVROLET NOVA, HAS BEEN MY ALL TIME FAVORITE CAR / CARS, I DONT GET TO SEE .ANY OF. ( dDD SUBSCRIBERTHOSE, THEY HAVE A SHORT LIFE DO,TO ONCE FOUND BECOME DRUG CARS, I WOULD LOVE TO HAVE A CLOSE TO FA (D DDCTORY CAR. ESPECIALLY THE DASH AREA, MY DAD BOUGHT ONE OFF THE SHOWROOM FLOOR, WHEN OVER THE YEARS I WAS ALWAYS REBUILDING CARS NOT AS WELL AS YOU, BUT IVE DAMAGE MY SPINE, I NOW HAVE crushed fractured spine, so for now I'm in a wheel chair, I CA. NO LONGER WALK, HOPFULLY A TEMPERARY CONDITION, BUT, SINCE I CANNOT BULD A 64 NOVA, IF YOU CAN FIND ONE AND ALLOW ME THE PLEASURE OF WATCHING YOU REBUILD IT, TY FOR ALLOWING ME TO BE A SUBSCRIBER TO ( D D).
I need that transmission for my s10 lol
haha keep your eyes peeled. Theyre out there
Having to take that back apart would drive me absolutely positively crazy.I hate redoing things.But the longer I work on cars,the more Im seeing its gonna happen.
haha yup, such is life
I like it better than all the tri 5 Chevy stuff honestly. Keep up the good work!
Thanks man! Appreciate the support. I've always loved Nova's but it doesnt get the same views as the Tri 5's for some reason
@@DDSpeedShop Nova were my favorite in late 60 s I think you will get a lot of likes
Well Lad, your on the one yard line and inches for touch down and I know you well as this is sunday night here (company) It is running, valves ran in... cam broke in and exhaust burns on one or more places but trust me when you found the bushing wouldn't let you in Double D, (wifes bra size?) I would of shit biscuits and nails and hit the Jack Daniels for at least one swig then get er done. I been there but if that is the only blemish in this build then your golden. I share as many as I can to people with channels as well as send to buddies, they are not as old as me so chances are at least one will subscribe.. a drop of water in the ocean I know but damn it, three hundred and forty million people in the usa alone and I shared this in the UK and Russia as well. Traction bars or four link.. hard to guess but if it were me I would roll on traction bars for the time being. Your still working for a living and not ready to retire on videos yet so the fifty seven four door delete will pull some serious coin maybe as people ate the girl friends car bit and it still has milage to go yet. Great job and so proud to have chatted with you on some stuff... at seventy three saturday, still have a hu rah left in me
Well happy birthday! and thanks for the shares! Dan and Dani so I decided to go with DD. Never thought much would come out of it, so I didnt spend much time on the name haha.
#38 OCT 27 2019 09:45 AM SUN 👍
🖐✌🇺🇸 ♿ 😎 🏈 KC Chiefs 🎃 31st
In sure you know but use gear oil in the muncie
Different yoke on driveshaft from changing t350 to 4spd?
Should be the one for 400 trans
@@johnpassmore8176 I thought manual yokes were different than auto
@@alfredodirks3537 not 100 percent sure but I think 400 4 l60 and St. Are same spline
@@alfredodirks3537 actually Alfredo I was thinking when I took 4 cyl with a 5 spd. In it . I used the same driveshaft in a turbo 350. Right length and correct yoke
Out of s 10
I'll buy the gold Moroso stuff if you'll sell it to me. I cant find em down here. I think they stopped producing them.
yeah I've been looking forever. I snatched em up when I saw em
@@DDSpeedShop yeah, they're hard to find.
Still waiting for your post zip code so I can get a estimate for shipping to u
sorry buddy im just working on getting a po box going
Maybe why you don’t have as many likes on it. Because it’s not a trifive video..
I would have put that 4 speed in the 55.
yeah it was a toss up
Whats in the engine?
just a warmed over small block
DD Speed Shop so almost stock then
DD Speed Shop your 55 sounds stock too. So whats DD speed shop when you run slow cars?
DD Speed Shop whats the ET in the quarter for nova and 55?
DD speed shop I’m writing a letter to Santa so you can find a 57 Chevy nomad wagon it’s on my list so be here between now and Christmas and maybe you might get 20,000 subscribers if you put a 57 Chevy nomad wagon together and boot out that nova nova‘s got to go stay tune it might show up at your door it’s on my list to Santa take care junkman do PS if you got your second snowstorm yet
Haha a bunch of subscribers and a nomad would be pretty awesome! Hahs. Just starting to snow again now.
I find it much easier to hang the left side header before dropping the engine in.Makes for less struggles and curses trying to fit the header to the head
the left header came out easy from the bottom. Not sure how it's gunna go with the clutch linkage
I used to love it but I'm old now everything you try to do pisses you off.. o well
haha i try to stay calm as best I can