Don't you just love it, when you dont thinking will turn out hood and it's a pleasant surprise in the end. I like the black and gold with the multi coloured guilding flakes. Great idea using adhesive sheets in embossing folder. ❤
There you have it! The creative “brain gears” got out the gloves and tongs and pulled the trash from the fire and made it into a treasure! Well done you! Not just clever but humorous to boot! You and l are the same age, 1944 vintage l believe… Wrote a ditty yesterday you may enjoy… “l looked around…. The snow was gone and Spring was here. I looked again…. to my surprise…. the snow was hiding in my mirror.” 😮Not everyone will get it… but think you might! Thanks for another delightful “bit of play”. Be blessed as you bless.🙋🏼♀️
Hi Christine, you give us all such encouragement to not throw in the towel if things don't at first work out -- persistence paid off, it turned out fabulously. Thanks so much. 😊🇨🇦
I really enjoyed watching how you rescued the panel when it didn’t quite turn out as you’d expected. It was a beautiful result. I had a bit of a hiccup with gilding flakes the other day. It’s been a bit chilly, so I’d put the heating on. We have reverse cycle aircon, where the air comes through ceiling vents and kicks in every now and again to keep the room at the set temperature. My craft table is under a ceiling vent. Yep. I discovered gilding flakes will cling to more than just glue and silcone😂
A very striking card, I enjoy watching your play day videos there is always something new on each one. The idea’s you have tried work so well and we get to see an amazing card. Thank you and take care.
Oh wow. What a stunning effect. It reminds me of the brass rubbings we used to do long ago. I love your combination and it would look amazing on any project. Thank you for another fab project and tutorial. Crafty Hugs - Dawn 🌅
Recently I watched a RUclips video of a lady named Heidi doing something that made me think of you. I kept thinking Christine would love this. Christine would love this. What Heidi did was she used a very fine point tacky glue pen to make different size circles. She used her heat tool to set the tacky glue. Then she used gilding flakes on the circles. They were absolutely breathtaking.
Another great idea with embossing with sticky tape and then adding gilding flakes! Made a stunning card. I did find some of my gilding flakes but now I want that one!
A great demo, sometimes making a wee mistake turns into something just as beautiful! Who would have thought clear embossing powder would take the design to a different level. It is lovely. 🩵
What a remarkable recovery Chris. I would have run up the white flag after the black layer, but in your inimitable fashion, you took a left at Albuquerque and ended up in the winner's circle. Fantastic result. The use of the gilded section for the sentiment ties it all together perfectly. TFS
Well I was sitting on the edge of my seat! You just proved that what we want to scrap can be rescued! I had no doubt! This turned out beautifully! Amazing Christine! 🙋♀️💕🇺🇸
Hi. That card is just fabulous. The dark vintage look of the florals against the bright, splashy metallic background really speaks to me. It's truly fabulous. Around the same time as I got my fancy electric eraser I also treated myself to a mini vacuum cleaner (Made To Surprise) for a fast clean-up of my desk and it works very well despite only being battery run. Thank you for sharing this great video and have a lovely day.😊
This is beautiful!!! I have used these same gilding flakes! I burnished the stick it adhesive sheet prior to removing the backing, applied the gilding flakes then ran it through the embossing folder and it was so beautiful and detailed that I didn’t have to use anything to pull out the embossed portion!! I did use an embossing folder with a small floral design!! I love this technique!!!❤❤❤
I don't know why you doubt yourself Chrissie, your choice of flakes was spot on I think and no matter what you do with it, it'll be amazing, I've tried it now and love the result. 👍🌈Fab! 🤪
You rescued it with that clever frame :) When I have spent time making something that turns out a bit iffy, especially if heat embossed, I cut the piece into narrow strips most of which can look super laid down towards the side of a card or as a border. No one can work out the original design but the texture & colour remain.
Wow turned out amazing in the end. Was a bit worried to start with. Your creativity and puzzle solving is amazing. Thanks as always Christine for sharing.
Christine, I am not always sure where you are heading with your cards but the journey is always fun and the end result always worth the price of gas. I love this card. Thanks for showing your process. 🇨🇦😀
This turned out much like some backgrounds that we don't necessarily love, but using it in small pieces and it's beautiful. I did like the black ink on top, but once you heat embossed it, I liked it even more. But to much to use the whole thing. The small piece you used is just gorgeous, your card will be gorgeous! I love the black background with the gold mat. Very elegant, and yes a little bit oriental looking. Hugs, Brenda
so love watching your process. I had several "failures" this week and did a bit of a rescue but I assure you the outcome was nowhere near your masterpiece. 🙂 And I'm now looking up "shall we let the dog see the rabbit?" Love my afternoon Chris session. Thank you
Many thanks Viki. I think the phrase is to do with greyhound racing. They have a thing that looks like a rabbit which belts around the track on a rail, and when it goes past the traps where the dogs are, their gates are opened (letting them see the rabbit) and they tear around after it!
Enjoyed watching you carry on even though you weren't quite sure where you were headed! You persisted and it turned out amazing.I'll consider that my lesson for today as I often give up to soon!
I do love the impact of gilding flakes, but the residue does get everywhere. Cosmic Shimmer do lovely shades, but you’re correct, sometimes a single colour is needed. Happy that you rescued your card xxx
I wasn’t a fan of the large card but what you needed up with is beautiful. I’ll need to go to IG to see the finished product. As always another great video; thank you!! ☮️❤️
Hi Christine 🥰🦘🦘 When I saw you going for it with the black ink I was a bit like "ah oh! Here we go😱" But I am thrilled that you persisted, setting sail in another direction, and created this gorgeous, framed artwork for us to enjoy! Thank you so much! 🙏🌹
A great technique but also a wonderful lesson in not just giving up on something but using what most of us would call a mistake as a bit of creative inspiration. You are pretty darn awesome lady. 🎉
What a brilliant idea Christen- love the idea of using double adhesive sheets with embossing folders. The ideas are going to be endless and so different from just using our inks. Thank you for sharing your ideas and processing journey with us. Have a lovely day.
Thank you for taking us on your adventures in crafting! So many tips in this video. It would have been interesting to see how the distress oxide worked, though keeping some of the black would still offset those colors beautifully. There are so many tips and new ideas in this video; I'm going to try embossing with an adhesive sheet and the gilding flakes and filling in gaps with a Nuvo pen (brilliant). You always get my creative juices flowing!!
This turned out beautifully Chrissie, and actually the depth of the embossing did show up the design well but may have been difficult for you to see under your strong light, and all things are personal choice I know, but with the black it does look much more striking and the glossy finish is perfect. I love that you used just a small portion and is finished brilliantly with the frame, and the added die cut sentiment using some more of the gilded piece with that soft gold base layer looks terrific. x
Hello christine . Jolie creation ! Nous profitons de tes essais et pour ca un grand merci . Il faut également quelques talents d encadreur 🤗 . Merci pour la vidéo , je vais retourner voir la carte finie afin d y analyser la technique et les finissions. Good afternoon 👋👋👋👋
I have resisted multicolor gilding flakes until I saw this, what a great idea. Also it was interesting to see the black ink on the large piece of embossing, it looked like a giant stamp on camera. Something that size might work well for a decorative piece. Thank you for the inspiration. I admire your ability to take just a piece and make it your own.
Happy to see the video for this card and interesting to see the journey it took to get there. The card is sublimely beautiful as are you. Thank you for sharing. Sometime when I finish a card I am not sure I like it. Usually later when I look at it again I am less critical and enjoy it more if you can understand where I am coming from.
Wow Christine, you gave me so many new ideas with this video. Your card is beautiful even if not what you expected. I think in crafting, you are the epitome of the saying "When life gives you lemons . . ." I hope I wrote that correctly, you always make it awesome!
You are so clever at rescuing a project. I liked it before you heat embossed but it was so much more dramatic afterwards. The sentiment is inspired as well. I love how you have used the coloured card underneath the wording. It’s so subtle but really impactful and ties the two elements together perfectly. Genius. You are the queen of card making🫅🏼🥇🌟
I think I like the effect without the black better. Im a less is more kind of crafter usually. wonder about using a rust colored ink instead of the black? Will need to get some of that delicious gilding flake color and give that a try. Love your adventuresome nature.
Good morning, I have started to rub my bone folder over the Stick it before I apply it to my card , it helps all of the adhesive come off the release sheet.
I enjoyed watching you work through the "problems. I've made many cards using this technique. Some were beautiful, some not so successful. I have mixed feelings about the Stazon. I noticed that on some of the cards it remains tacky, never feeling quite dry. I'll use your idea about adding the clear embossing powder. Thanks for the suggestion.
I love this. I hate that my iPad can’t go on the community tab though. I would never mind waiting while you get the product you need to continue working on the card. Thanks for the inspiration though. I’ve been watching a ton of your videos
Perfect!!! Thanks for muting during the heat emboss bit, that was perfect Ms. Chrissie👏🏼!!! Can I please suggest another, perhaps fast forward through the cleaning part? Thanks
@@Chrissieannie You’re doing way better than I. I’ve had mine & all I use it for is to watch movies & videos, to help me fall asleep at night. Here are some useful function keys: The (Fn) function keys on the top row provide shortcuts for these common system functions: • Brightness (F1, F2): Press the Decrease brightness key or the Increase brightness key to decrease or increase the brightness of the screen. • Mission Control (F3): Press the Mission Control key to view what’s running on your MacBook Air, including all your spaces and open windows. • Spotlight Search (F4): Press the Spotlight key to open Spotlight and search for something on your MacBook Air. • Dictation/Siri (F5): Press the Microphone key to activate dictation-you can dictate text wherever you can type (for example, in Messages, Mail, Pages, and other apps). To activate Siri, press and hold the Microphone key, then immediately speak your request. • Do Not Disturb (F6): Press the Do Not Disturb key to turn Do Not Disturb on or off. When Do Not Disturb is on, you won’t see or hear notifications on MacBook Air, but you can view them later in Notification Center. • Media (F7, F8, F9): Press the Rewind key to rewind, the Play/Pause key to play or pause, or the Fast-forward key to fast-forward a song, movie, or slideshow. • Mute (F10): Press the Mute key to mute the sound from the built-in speakers or 3.5 mm headphone jack. • Volume (F11, F12): Press the Decrease volume key or the Increase volume key to decrease or increase the volume of sound from the built-in speakers, 3.5 mm headphone jack, or Bluetooth audio device. (Fn) Function key’s: located on the bottom left hand of the keyboard Hope this helps a little? Have a Great Evening Ms. Chrissie!!!
I've seen others do this technique but they add the flakes first, then emboss. What a gorgeous end result. I'm ready to have my play with all my gilding flakes and embossing folders. I've gotten a few colors of Staz-on as I don't want to only have black as a option but it looks like oxides might also work (and maybe even better). I have quite a few embossing folders featuring trees so I'm thinking Fall or Winter cards maybe. Adding the embossing powder made quite a difference. Not sure I would have thought of that. Off to stalk your card.
If you put a foam dot on the inside of your StazOn lid, it will catch the liner and you won't have to fuss with it every time you use the ink...but it does keep it where it needs to be to seal the pad.
Hi Christine, I have a question for you 😊. I’ve just had my first go with gilding flakes and I’m not sure where I’ve gone wrong. I used some double sided adhesive paper and cut out my die as usual. I put the gilding flakes over the surface as I’ve seen my guru (you😊) do many times, but after I had finished burnishing the surface, there is a tacky residue. Is this normal or do you think I’ve gone wrong somewhere? Thank you ☺️
Thank you I am so glad it turned out lovely I kept thing gilding wax will come out next it did'nt, Cloe would have though of it 🙂ruclips.net/user/sgaming/emoji/7ff574f2/emoji_u1f60b.png
Very inspiring,showing that you can always rescue a mistake and turn it into an inspiration.Lovely oriental look.
Thanks so much! 😊
Don't you just love it, when you dont thinking will turn out hood and it's a pleasant surprise in the end. I like the black and gold with the multi coloured guilding flakes. Great idea using adhesive sheets in embossing folder. ❤
Many thanks 😊😊😊
There you have it! The creative “brain gears” got out the gloves and tongs and pulled the trash from the fire and made it into a treasure! Well done you! Not just clever but humorous to boot! You and l are the same age, 1944 vintage l believe… Wrote a ditty yesterday you may enjoy… “l looked around…. The snow was gone and Spring was here. I looked again…. to my surprise…. the snow was hiding in my mirror.” 😮Not everyone will get it… but think you might! Thanks for another delightful “bit of play”. Be blessed as you bless.🙋🏼♀️
Actually I was 1945… just a baby! I enjoy not letting things get the better of me!🤣🤣❤️
Hi Christine, you give us all such encouragement to not throw in the towel if things don't at first work out -- persistence paid off, it turned out fabulously. Thanks so much. 😊🇨🇦
Thanks so much 😊❤️😊
I really enjoyed watching this rescue! Love your ideas and sense of humor!
Thank you so much!
I really enjoyed watching how you rescued the panel when it didn’t quite turn out as you’d expected. It was a beautiful result.
I had a bit of a hiccup with gilding flakes the other day. It’s been a bit chilly, so I’d put the heating on. We have reverse cycle aircon, where the air comes through ceiling vents and kicks in every now and again to keep the room at the set temperature. My craft table is under a ceiling vent. Yep. I discovered gilding flakes will cling to more than just glue and silcone😂
Oh dear!😀😀😀
That was very well rescued. Looks lovely in the end and just shows you not to throw things away!!!❤
Yes, thanks
I like that you show how to rescue a card!! It helps so much!! This way I will try to find a way to save it and use it!! Thanks so much for sharing!!
You are so welcome!
A very striking card, I enjoy watching your play day videos there is always something new on each one. The idea’s you have tried work so well and we get to see an amazing card. Thank you and take care.
Glad you enjoy it!😊
Oh wow. What a stunning effect. It reminds me of the brass rubbings we used to do long ago. I love your combination and it would look amazing on any project. Thank you for another fab project and tutorial. Crafty Hugs - Dawn 🌅
Many thanks Dawn 😊😊😊
Recently I watched a RUclips video of a lady named Heidi doing something that made me think of you. I kept thinking Christine would love this. Christine would love this. What Heidi did was she used a very fine point tacky glue pen to make different size circles. She used her heat tool to set the tacky glue. Then she used gilding flakes on the circles. They were absolutely breathtaking.
Sounds like a great idea!😊
It worked out beautifully in the end. Well done for persevering and ending up with something lovely . I really like watching your thought processes x
Thanks so much Linda! 😊
That turned out beautiful. Great idea.
Thank you! 😊
Another great idea with embossing with sticky tape and then adding gilding flakes! Made a stunning card. I did find some of my gilding flakes but now I want that one!
have fun!
Thank you for another great video. Always interesting and I learn something new each time. 😊👏💕🐕🐰
That’s great, thanks so much 😊😊😊
A great demo, sometimes making a wee mistake turns into something just as beautiful! Who would have thought clear embossing powder would take the design to a different level. It is lovely. 🩵
Thanks so much!😊
Transfixed watching this Christine, absolutely gorgeous.xx
Thanks so much 😊😊😊
Beautiful save!!! The embossing powder was a brilliant idea and not one I would have thought of doing. I love the finished card.
Thanks so much! 😊
What a remarkable recovery Chris. I would have run up the white flag after the black layer, but in your inimitable fashion, you took a left at Albuquerque and ended up in the winner's circle. Fantastic result. The use of the gilded section for the sentiment ties it all together perfectly. TFS
Once more you bring a smile to my face with your wonderful comments, I so appreciate every one!😊😊😊 thank you ❤️
@@Chrissieannie You really do spoil us with our daily dose of fun and inspiration, the least we should do is to show our appreciation.🥰
Stunning affect from that piece with simply adding black and gold.
Thank you 😊
Well I was sitting on the edge of my seat! You just proved that what we want to scrap can be rescued! I had no doubt! This turned out beautifully! Amazing Christine! 🙋♀️💕🇺🇸
Many thanks 😊
Hi. That card is just fabulous. The dark vintage look of the florals against the bright, splashy metallic background really speaks to me. It's truly fabulous. Around the same time as I got my fancy electric eraser I also treated myself to a mini vacuum cleaner (Made To Surprise) for a fast clean-up of my desk and it works very well despite only being battery run. Thank you for sharing this great video and have a lovely day.😊
Thanks Deb, I fancy the idea of a little desk vacuum! I must investigate!😊
@@Chrissieannie I love mine, something neat to help keep things neat! 😄
This is beautiful!!!
I have used these same gilding flakes! I burnished the stick it adhesive sheet prior to removing the backing, applied the gilding flakes then ran it through the embossing folder and it was so beautiful and detailed that I didn’t have to use anything to pull out the embossed portion!! I did use an embossing folder with a small floral design!! I love this technique!!!❤❤❤
it was the embossing folder plus flakes which weren’t compatible, but we got there in the end!
Certainly a voyage to parts unexpected. The end result with the added sentiment is quite unique and striking.
Thanks so much
I don't know why you doubt yourself Chrissie, your choice of flakes was spot on I think and no matter what you do with it, it'll be amazing, I've tried it now and love the result. 👍🌈Fab! 🤪
Oh thank you!
You rescued it with that clever frame :) When I have spent time making something that turns out a bit iffy, especially if heat embossed, I cut the piece into narrow strips most of which can look super laid down towards the side of a card or as a border. No one can work out the original design but the texture & colour remain.
Absolutely!
Once again a beautiful technique and the end result gorgeous x
Thanks so much 😊
Wow turned out amazing in the end. Was a bit worried to start with. Your creativity and puzzle solving is amazing. Thanks as always Christine for sharing.
Thank you! 😊
Christine, I am not always sure where you are heading with your cards but the journey is always fun and the end result always worth the price of gas. I love this card. Thanks for showing your process. 🇨🇦😀
I’m not always sure where I’m going either, this journey was definitely a detour!🤣🤣🤣
Well look how beautiful that turned out! ❤
Thanks Peggy 😊😊😊
This turned out much like some backgrounds that we don't necessarily love, but using it in small pieces and it's beautiful. I did like the black ink on top, but once you heat embossed it, I liked it even more. But to much to use the whole thing. The small piece you used is just gorgeous, your card will be gorgeous! I love the black background with the gold mat. Very elegant, and yes a little bit oriental looking. Hugs, Brenda
I’m so glad you liked it, the video was a bit tedious at times when I was wondering what to do!🤔🤔🤔
Wonderful card as always loved the way you just kept on with different ideas 👋🤩
Thank you so much 😊
Lovely to see what you did with your piece, shows there are no mistakes, your card is lovely 😍💜🧚♀️😘Chris @ Dark Fairy
Thanks so much Chris 😊
so love watching your process. I had several "failures" this week and did a bit of a rescue but I assure you the outcome was nowhere near your masterpiece. 🙂 And I'm now looking up "shall we let the dog see the rabbit?" Love my afternoon Chris session. Thank you
Many thanks Viki. I think the phrase is to do with greyhound racing. They have a thing that looks like a rabbit which belts around the track on a rail, and when it goes past the traps where the dogs are, their gates are opened (letting them see the rabbit) and they tear around after it!
Enjoyed watching you carry on even though you weren't quite sure where you were headed! You persisted and it turned out amazing.I'll consider that my lesson for today as I often give up to soon!
Glad you enjoyed it!😊😊😊
Good save ! Turned out beautiful and elegant.
Thank you! 😊
I do love the impact of gilding flakes, but the residue does get everywhere. Cosmic Shimmer do lovely shades, but you’re correct, sometimes a single colour is needed. Happy that you rescued your card xxx
Thanks so much😀
After a struggle,what a lovely card Chris..
Thanks so much 😊
I wasn’t a fan of the large card but what you needed up with is beautiful. I’ll need to go to IG to see the finished product. As always another great video; thank you!! ☮️❤️
Thank you ❤️❤️❤️
Another inspiring video. Something else to try with my stash. Thank you x
Have fun!
Simply beautiful Christine. 🙂
Thank you so much!
I love all of your cards!
Thanks so much😊😊😊
Hi Christine 🥰🦘🦘 When I saw you going for it with the black ink I was a bit like "ah oh! Here we go😱"
But I am thrilled that you persisted, setting sail in another direction, and created this gorgeous, framed artwork for us to enjoy! Thank you so much! 🙏🌹
Sometimes things are “un-saveable”, but it’s worth having a try to see if something can be achieved!😀😀😀
A great technique but also a wonderful lesson in not just giving up on something but using what most of us would call a mistake as a bit of creative inspiration. You are pretty darn awesome lady. 🎉
Thanks very much ❤️❤️❤️
Beautiful card! Also, a new way to use gilding flakes! TFS
Thanks so much!😊
Les cadres font beaucoup dans la mise en valeur 🤗👏👋👋
C’est vrai😊😊😊
Brilliant, I love how it turned out 🎉
Thanks Yvonne❤️😀❤️
Good save!! It turned out beautiful!
Thank you! 😊
It's great how you have made it work despite being not quite what you had in mind! Small pieces of very busy makes look striking and keep it CAS!
Thanks Sandie 😊😊😊
The black on gold and the gilding flakes are striking. So pretty.
Thank you 😊😊😊
What a brilliant idea Christen- love the idea of using double adhesive sheets with embossing folders. The ideas are going to be endless and so different from just using our inks. Thank you for sharing your ideas and processing journey with us. Have a lovely day.
Thanks so much! 😊
Marvelous, Christine! You work miracles! From Cheryl in AZ
Thanks Cheryl 😊😊😊
Thank you for taking us on your adventures in crafting! So many tips in this video. It would have been interesting to see how the distress oxide worked, though keeping some of the black would still offset those colors beautifully. There are so many tips and new ideas in this video; I'm going to try embossing with an adhesive sheet and the gilding flakes and filling in gaps with a Nuvo pen (brilliant). You always get my creative juices flowing!!
That’s great!😊❤️❤️
I thought the black was beautiful! But, you really stepped it up!
Thanks so much😊😊😊
Yay you saved it, it looks great 😃
Thank you 😋
This turned out beautifully Chrissie, and actually the depth of the embossing did show up the design well but may have been difficult for you to see under your strong light, and all things are personal choice I know, but with the black it does look much more striking and the glossy finish is perfect. I love that you used just a small portion and is finished brilliantly with the frame, and the added die cut sentiment using some more of the gilded piece with that soft gold base layer looks terrific. x
Not at all what I thought it would be, but i was quite pleased in the end!😊😊🤣
You came up trumps again Christine 😊💙
Many thanks 😊
Hello christine . Jolie creation ! Nous profitons de tes essais et pour ca un grand merci . Il faut également quelques talents d encadreur 🤗 . Merci pour la vidéo , je vais retourner voir la carte finie afin d y analyser la technique et les finissions. Good afternoon 👋👋👋👋
Thanks 😊😊😊
I have resisted multicolor gilding flakes until I saw this, what a great idea. Also it was interesting to see the black ink on the large piece of embossing, it looked like a giant stamp on camera. Something that size might work well for a decorative piece. Thank you for the inspiration. I admire your ability to take just a piece and make it your own.
Thank you 😊😊😊
Beautiful once again
Thank you so much 😀
Beautiful Christine !
Thank you so much!😊
Happy to see the video for this card and interesting to see the journey it took to get there. The card is sublimely beautiful as are you. Thank you for sharing. Sometime when I finish a card I am not sure I like it. Usually later when I look at it again I am less critical and enjoy it more if you can understand where I am coming from.
You are so welcome!
Wow Christine, you gave me so many new ideas with this video. Your card is beautiful even if not what you expected. I think in crafting, you are the epitome of the saying "When life gives you lemons . . ." I hope I wrote that correctly, you always make it awesome!
It’s a good job I’m fond of lemonade!🤣🤣🤣
Beautiful!
Thank you!
Interesting technique Christine. Thanks for sharing. Many times things turn out differently than planned. Just a happy accident.
Thanks
You are so clever at rescuing a project. I liked it before you heat embossed but it was so much more dramatic afterwards. The sentiment is inspired as well. I love how you have used the coloured card underneath the wording. It’s so subtle but really impactful and ties the two elements together perfectly. Genius. You are the queen of card making🫅🏼🥇🌟
You are really kind Sue 😊😊😊 thank you
Interesting technique. Can’t wait to try it. (New subscriber here)
Welcome! I hope you'll enjoy many more of my videos!😊😊😊
I love it 😊
Thank you 😊😊😊
I think I like the effect without the black better. Im a less is more kind of crafter usually. wonder about using a rust colored ink instead of the black? Will need to get some of that delicious gilding flake color and give that a try. Love your adventuresome nature.
I didn’t like the black once I had done it but made the best of a bad job! I like the end result!
Good morning, I have started to rub my bone folder over the Stick it before I apply it to my card , it helps all of the adhesive come off the release sheet.
Wonderful!
I enjoyed watching you work through the "problems. I've made many cards using this technique. Some were beautiful, some not so successful. I have mixed feelings about the Stazon. I noticed that on some of the cards it remains tacky, never feeling quite dry. I'll use your idea about adding the clear embossing powder. Thanks for the suggestion.
My pleasure 😊
Nice matting
😁
Did you say thank you, I wasn’t sure? 😅 a really lovely card.
Just a couple of times!
I love this. I hate that my iPad can’t go on the community tab though. I would never mind waiting while you get the product you need to continue working on the card. Thanks for the inspiration though. I’ve been watching a ton of your videos
I discovered that I can now see the community tab on my iPad. Maybe try again?
@@Chrissieannie thanks so much!
Perfect!!!
Thanks for muting during the heat emboss bit, that was perfect Ms. Chrissie👏🏼!!!
Can I please suggest another, perhaps fast forward through the cleaning part?
Thanks
I’m still learning my way around my Mac Book. Baby steps!
@@Chrissieannie You’re doing way better than I. I’ve had mine & all I use it for is to watch movies & videos, to help me fall asleep at night.
Here are some useful function keys:
The (Fn) function keys on the top row provide shortcuts for these common system functions:
• Brightness (F1, F2): Press the Decrease brightness key or the Increase brightness key to decrease or increase the brightness of the screen.
• Mission Control (F3): Press the Mission Control key to view what’s running on your MacBook Air, including all your spaces and open windows.
• Spotlight Search (F4): Press the Spotlight key to open Spotlight and search for something on your MacBook Air.
• Dictation/Siri (F5): Press the Microphone key to activate dictation-you can dictate text wherever you can type (for example, in Messages, Mail, Pages, and other apps). To activate Siri, press and hold the Microphone key, then immediately speak your request.
• Do Not Disturb (F6): Press the Do Not Disturb key to turn Do Not Disturb on or off. When Do Not Disturb is on, you won’t see or hear notifications on MacBook Air, but you can view them later in Notification Center.
• Media (F7, F8, F9): Press the Rewind key to rewind, the Play/Pause key to play or pause, or the Fast-forward key to fast-forward a song, movie, or slideshow.
• Mute (F10): Press the Mute key to mute the sound from the built-in speakers or 3.5 mm headphone jack.
• Volume (F11, F12): Press the Decrease volume key or the Increase volume key to decrease or increase the volume of sound from the built-in speakers, 3.5 mm headphone jack, or Bluetooth audio device.
(Fn) Function key’s: located on the bottom left hand of the keyboard
Hope this helps a little?
Have a Great Evening Ms. Chrissie!!!
🤩
😊
I've seen others do this technique but they add the flakes first, then emboss. What a gorgeous end result. I'm ready to have my play with all my gilding flakes and embossing folders. I've gotten a few colors of Staz-on as I don't want to only have black as a option but it looks like oxides might also work (and maybe even better). I have quite a few embossing folders featuring trees so I'm thinking Fall or Winter cards maybe. Adding the embossing powder made quite a difference. Not sure I would have thought of that. Off to stalk your card.
Oxides would take a long time to dry naturally, as you saw it was still wet even after heat was applied!
I was wondering if the look would be different if you added the flakes first then emboss and ink? Love the card though!! Gorgeous!
@@Jackin2002 why not try it!
If you put a foam dot on the inside of your StazOn lid, it will catch the liner and you won't have to fuss with it every time you use the ink...but it does keep it where it needs to be to seal the pad.
Great tip! Thanks
I use an old pan scrubber for flake blending
Great idea
💜💜💜 I don’t have Facebook or Instagram - would you post a picture on RUclips or on your next video so we can see the finished card? It’s beautiful!
I put pictures of the finished card on The Community Tab on my RUclips channel, so that you can see them in close up!
@@Chrissieannie 💜💜💜 thank you!
Hi Christine, I have a question for you 😊. I’ve just had my first go with gilding flakes and I’m not sure where I’ve gone wrong. I used some double sided adhesive paper and cut out my die as usual. I put the gilding flakes over the surface as I’ve seen my guru (you😊) do many times, but after I had finished burnishing the surface, there is a tacky residue. Is this normal or do you think I’ve gone wrong somewhere? Thank you ☺️
If it’s completely covered and there’s still a little tacky, go over the surface with an embossing Buddy or a little talc !
@@Chrissieannie Thank you 😊
Put it away for a rainy day 🙂
???
I’ve noticed that the edited videos has more ads.
That’s interesting!
Thank you I am so glad it turned out lovely I kept thing gilding wax will come out next it did'nt, Cloe would have though of it 🙂ruclips.net/user/sgaming/emoji/7ff574f2/emoji_u1f60b.png
No Gilding Wax this time 🤣❤️❤️