How To Diagnose A CLUTCH NOISE Problem | Ford Mustang Gt | Bearings
HTML-код
- Опубликовано: 13 окт 2016
- My clutch started to make a really loud noise so i did some research and found out two possible problems being the throwout bearing or the pilot bearing. Here is a demonstration on how to diagnose a clutch noise problem!
I hope this helps you grasp an understanding of the problem and how to fit it.
Leave a like if This video helped you. Thank you so much!
SUBSCRIBE for more informational videos!
Have a great day!
Follow my social media:
Instagram: glo_ysa?hl=en 
Авто/Мото
sounds like mine. after 6 years, your videos still helping out. thank you!
You've saved my life.
I've got the same problem in my car, and now I have a better idea about what it is.
Thanks for the video. It reassures me that my clutch noise isn't That bad. Still some life in it
that’s what i here and now is about to just go out completely
LMFAOO I feel this same way right now 🤣🤣
😂😂 3 yrs later me too
If you consistently have a problem burning up your throw out and pilot bearings. Change the clutch/shifter fork. Good chance if its stock then its probably bent. Even if its bent the slightest fraction it will basically cause both bearings to not fully release during engagement and disengagement. Even though the car will move and drive normally you will constantly have that problem
thanks for making your videos, really helpful lol. Trying to teach my mom stick but ended up just showing her your videos instead haha
+Anton zzz that is awesome man!! Means a lot to me! Hope your mom learns fast lol
I have a 96 Mustang gt and it makes a similar sound in the clutch. This video is really helpful. Thank you!
Glad I could help man!
I have a 96 also does yours ever grind when you put it in second really quick when you step on it? It doesn’t do it for my dad only for me ans I’m curious what I’m doing wrong
I so feel your pain in this video. I have a manual FG III Ford XR6 ute (I live in Australia) and I thought it had a bad noise from the get go; turns out it's just the turnover noise that the TR6060 transmission makes. Soon after that, my car started struggling with hill starts and even basic take-offs, making a clunking noise which became faster and faster under acceleration until you could barely hear it from inside the car. Turned out to be the drive shaft centre bearing lmao. We believe the previous owner (I bought at 72,000km odo) might have had some fun in her before wearing the car in well enough, so to speak.
On another note, I hate how pricey cars can be when things go wrong. My two previous cars; a 2004 Suzuki Jimny 1.6L and a 2004 Ford Courier/Mazda B2500 2.5L both cost me the literal scrapings of whatever remains of Fafnir's stolen treasure *(norse myth moguls wya)* because I regret spending so much to fix them, even though I loved them. The B2500 (diesel) even ended up completely ceasing its engine due to bent conrods among other things!
Cars are an expensive hobby but at the end of the day we all need to have each others' backs and comfort each other when our precious vehicles are having troubles, as they do. It does my head in when people go on about fixing E V E R Y T H I N G yourself. That is SO much time wasted that could be spent working to fund having fun with your car! Having a reliable, car-smart mechanic is not a bad thing and don't let anyone ever tell you it is.
Lots of love from Aus :))
Your video was great,you told me what my problem was by watching your video.great job .i have a 2003 gt mustang.thank a lot from John Davis from rising sun md
Thank you for the affirmation. Ive been trying for a month and a half to figure out what the problem was.
Thnx for sharing this with us. I am experience a familiar noise with a megane coupe. The sound comes and goes and it doesn't matter if the car is in gear or not. As you speed the noise becomes more present. The noise is like the noise when you release the clutch pedal too early while the transmission is not fully engaged in gear. I am not certain though whether it's a clutch problem or something else like a transmission bearing?
I have 2004 mustang gt like yours too and having the very same problem. But I hear the noise under inside my front left tire. I thought it was just a rack and pinion or steering pump or a idler pulley. But thanks for this video,it gives me whole new other idea.
83. Mustang with a 5.0 5 speed. I replaced my clutch with a stage one that came with the pilot, bearing and throw out bearing. And I even replaced the cable and installed in aluminum quadrant with a firewall adjuster. Now mine does make a little bit of noise when you release the clutch. I’m hoping that I just need to make a little more adjustment with the cable to fix the noise
Shits like losing a best friend when your car starts making that noise;)
Dude saved me, totally worked as you described.
Blessings dude!!!
Thank you for this video man . I appreciate & it helped me know what to buy when buying a clutch kit . My mitsubish eclipse is making a very similiar sound and I am looking to replace my clutch . Thanks again .
+Samuel Gomez no problem. Glad I could help, hope your car gets fixed soon !
Could be the springs in the clutch disk loose and sometimes sitting in there flopping around done a few when I took the presure plate off the springs from the clutch disk just falls off
Thanks for your video, helps me a lot..
Did you fix the problem? Mines just started doing this only in first gear then it stopped then it did it agin, if you did fix it what have you done? Thanks
thanks for the vid man, thats the exact same thing happening to my supra
I have a 93 prelude that sounds like somethings knocking when my clutch is released but goes away when I push the clutch in I think it is the set of the pilot and throw out bearing and it grinds trying to rev match and I would have thought it was synchros but I just did them last month but I'm glad to know that it could just be a simple clutch replacement 🙏
hello from germany. I bought a brand new clutch and flywheel and throw out bearing (pilotbearing is old)
I have loud clacking noises I thought it comes from the engine so I replaced alot of parts and now I´m prettysure it´s the clutch. can I drive with a rattling clutch, or is it highly dangerous??
Thanks for the help. I have the exact same noises coming from the T5 in my Monster Miata.
thanks for the video bro..really helpful
im also havin the same thing is there any update of this did you fix it whats the cause of it you found out after you open up ur transmission?
Thanks man, I’m experiencing the same noise, 05 Mustang GT, my mechanic is charging $110/hr @ 7 hrs plus $494 clutch kit/throw out bearing, $194 flywheel , $41.99 rear main seals total just under $1500 😮
Do it do it all the time with the clutch out or every once in a while?
I have a question bro! After you change the clutch kit. The problem got solved ?
My car when I start it up and E- Break is on. In Neutral and not it's makes a little tapping? Flapping Noise. Whenever I press the clutch in the Noise Stops. But the car whenever I bought it had 102,000 miles on it and I've had it for 3-months know. I'm under the powertrain warranty and I don't know if it can be easy D.I.Y. or take it to the dealership and see if I can get it new clutch etc. Would the Clutch be apart of the (Powertrain warranty) Any info on this be greatly appreciated. Thank you for reading this and your thoughts and opinions?
i relly feel your pain in this video my friend...
Hey I have a 2006 Nissan 350z 6 speed manual and when I purchased the car, this noise wasn't there! Whenever I turn my car off with my foot pressed all the way down on the clutch it doesn't make any noise but when I turn off my car without engaging my clutch at all(of course it's in neutral) it makes this really loud rattling noise! Any ideas? Please help, I'm really concerned about my clutch!
My honda does the same thing but opposite it makes the rattle noice when i engage it and when it disengaged then it sounds normal any help?
I have the same exact problem in my Honda Accord 2006
and now something is wrong I can't shift
when I touch or press the clutch there is a noise.. unlike what it used to be ( when I press the clutch it become quiet )
Simply lift clutch pedal up . Clutch adjustment! Solved my problem. Was making same noise. Clutch has to be stock though.
My car is making the same noise even when you drive it
First off, it's common when you have a manual, to replace the throw out bearing as regular maintenance. There's a reason the clutch kits come with, I repeat, come with, the throw out and pilot bearing. The throw out bearing spins with the input shaft and contacts abrasive metal flat springs to disengage while moving and in gear. Throw out bearing replacement is the easiest replacement of the clutch maintenance process though, remove old one, grease the fork, and any other contact points, then slide back onto the shaft. Easy, and ever clutch kit I've ever gotten, always comes with this AND the pilot bushing. good call on the noise.
My throw out bearing split into two pieces. The pilot bearing wore out, and I guess the vibration split the throw out bearing. I replaced the pilot bearing with a needle bearing instead of the copper bearing. It worked like a charm.
My Mach 1 2004 is making a whining noise and the only way it doesn’t is when I press on the clutch, also I was shifting gears and had my foot on the clutch when it gave way like a tention line snapped? Any thoughts
same thing that just happened with my car. will keep y’all updated on what our plans are, gonna try to replace everything ourselves.
What hall bro
What happened bro
@@mewgag4591 it was actually the entire clutch for me, didn’t replace the throw out bearing bc we forgot, still makes a noise but pretty quiet. i’d say replace the entire clutch and the throw out bearing and make sure to check the slave cylinder inside the transmission.
I have a 2002 chevy silverado v6 and it won't shift when it does shift it makes a grinding noise but it will only shift to first gear
know this is old but has happened to me. how much did a shop charge you?
I have a slight hissing sound when I release my new car's clutch in neutral. It is like it engages with something. Is it normal?
Yep that’s the exact noise my car is making lately, I think it’s the release bearing
Ok so what BRAND stage 1 clutch kit did you get?
Did your shifter rattle as well?
How many miles do you have on a car
I have the exact same car except a 2003 Mustang GT with a tan interior and I've been getting this noise except not nearly as bad or as loud, it seems the problem is just beginning for me
how much mileage ur mustang had when u did the clutch replacement?
Mine sounds just like that ☹ just ordered a new exedy stage 2 and flywheel ..
Do not use the throw out bearing in the kit!!!! Use a frpp only!
This happen to me last year. It started with my TOB going bad, then eventually destroying the sleeve on my casing. Not a cheap repair.
Great video. I know it’s been a few years since you made this video. Hopefully you are still around and can respond. I have a 2015 mustang Gt 5.0 6sp performance pack car with 63 thousand miles. Same noise as in your video. When my clutch is pressed in the noise goes away. A transmission place that installed my current clutch in 11/22 said I need a new transmission. It’s a shame there are so many shaded places that want to take advantage of people. My car is modified with a 2018 1320 Junkie performance ported intake manifold with a jlt cold air intake and a custom tune, Bmr suspension parts.
I have the same issue NOW. Did you have a roller pilot bearing or the bushing? I really need to know before my clutch kit get here so I can possibly eliminate one component. Right now I have the bushing! But I have a roller on stand by.
did you fix your issue? I have a bushing and believe the same thing happening to me on my s550 after replacing everything
Thank you!
mines about the same make noise when u let go clutch and when u step on it no noise....not just that can't get into gears
Bro I need help!! I have an '11 5.0. When I turn the car on when it's cold or if it's been sitting for a while, I hear a loud screeching sound after I press the clutch to turn the car on. Also, when I shift into any gear passed 2nd I feel like the car isn't as responsive as it used to be when I first got it. Do you think it could be the clutch or throw out bearing? Mines kind of made the same sound as yours
Kevin Dean definantly sounds like throw out beaeing
thanks man. exactly my issue... would that explain why I can barely get into gear after 30 minute of driving
I don't think so I have the same problem but it shifts just fine. It's just noisy as hell
Mine is like a small ticking noise when im letting out the clutch i can hear it pretty well when I’m against a wall, but after the initial moving it goes away what could that be?
Did you replace your flywheel when you changed your clutch or did you just have your old flywheel cut down
Ben S cut or refinished why?
Thank you man you halped me alot my bmw started making that noise and I thought something inside the engine broke but my clutch started going and now it's totally fuck so I'm replacing it👍
did It start off small noise I feel like a thump when I put it in first gear ?
+Esteban Fragoza yea it starts off soft and then it gets louder. I believe the thump is normal, have it on mine too
Did this fix yours? I have a 2007 Mitsubishi Eclipse and it was diagnosed that it was the clutch release bearing. I got a whole clutch kit got it put in, and the car is still making the noise...?
i have the same problem in my celica its not a throw out bearing or pilot bearing so i have to bring it into a shop and get them to replace my input bearing in my transmission the noise almost completely goes away when clutch is enganged but not completely and it kind of sounds like something is grinding inside thats your flywheel rubbing against something
Robert Shingler glad to know I'm not the only one with the car doing this!
bought mine a month ago with it doing it have parked it since or it could be as simple as a loose pressure plate if you havent been in there yet which im hoping thats my case
DDTS Games I got the same problem on my Subaru Outback rn
I have 2007 Mitsubishi Eclipse too and I think I have the same problem as you each time I press the clutch it makes this sound but I'm not sure if I need the whole kit or if is one specific part. Did you ever figure out what your was?
Was your flywheel okay?
I’m about to buy an 04 the noise isn’t that bad it’s more high pitched and doesn’t change when I push the clutch in
I was driving to work yesterday and lost all ability to shift. When I pushed the clutch in and took it out of 4th I could not get it to go into 5th. I pulled over and it would not go into any gear. The engine runs but I have a sound alot like this. The car will let me put it in gear while it is off and even start it but won't let me do anything if the car is running.
Just my luck, randomly watched this vid couple weeks ago n what do u know... My damn clutch goes to shit n I have this same problem 🌝
Watch a vid on winning the lottery
Thank you
Can you still drive it tho ?
So was shifting affected at all? Harder to get out of gear when going to downshift?
Also what was it? Pilot?
I have added a brand new clutch in it with all 3 parts but mine only makes the sound after driving for a while and around 4-6000 ish RPM's whenever i feel like dragging on a empty long street
Whenever i push the clutch for like 1mm it stops completly not even the noice after you press the clutch as you have here and i just replaced everything and centered it with a tool and it has been working good for 2 weeks now but it starts to make almost the same sound
Could it be the damn flywheel? :/ i hate to freaking pull everything off again as i already had to break bank when replacing my clutch :(
TheJackalPhantom maybe the input shaft bearing
Thanks for the info
My 2005 Ford focus zx4 st is making the same noise
Can someone respond very fast please. Same issue on my 98 mustang gt and can i jus drive it to the shop? Or will it give out before? How long of a life does it have before it breaks? I bring it in tomorrow anyway.
Just saw your comment, how'd it go?
Have slightly the same problem with my 2000 Ranger. Has been making that sound for just a second or two when letting off the clutch in various gears. Been going on for about a year and a half now so I'm not rushing to get it fixed if it's not totally broken yet. Am I wrong not to? Somebody get back to me.
If it's a boat motor noise then it's just a misalignment between Flywheel and a clutch disk And then your clutch disk will probably only last couple of years
That’s a great price man.
My lada does this but when its realesed it makes a loud earrape screech
i needed a replacement clutch so i also went with the stage 1 exedy brand. during my research its safe to say dont use the throwout bearing that it comes with.
why is that... i have one in mine with 1500 km and it is making this noise... except you can hear abit more grinding so i was thinking it was the input shaft going into a shop in a couple days so i will know for sure
Can i know why not to use the throw out bearing that comes with ?
Kucik Kucik use an OEM ford tob much better quality
Mine makes a loud screeching sound When the clutch is engaged and disengaged. It only happens when I cold start it though
TheMattSVT throw out bearing
mine does the same I have a 01 gt
Same for 07 GT. Is it throw out or flywheel bushing? Which one was it for you?
I have the same issue. I uploaded a video. Not sure if it's the bearings
@@2011italianoboy TOB very likely.Mine made the same noise one night,a month later after I pulled the tranny the TOB was shot as was my clutch fork and pivot stud.
Mine makes a noise when u lift the clutch up but only in 1st gear ?
Sean O'Farrell sameeee
Hey so I’m having an issue. This how I diagnose. If you start the car and have it in neutral, then push clutch in. If you hear noise as clutch is in then it is your throw out/release bearing. If you don’t hear noise when clutch is pushed out but once you release the clutch pedal and it continues to make a weird grinding noise then it’s your pilot bearing. If you hear noise as you are releasing the clutch but it goes away once clutch is fully out then it is an annoying input shaft bearing. It’s harder to get to.
My man what clutch kit did you find for 200!?
Buying one tomorrow with a bad throw out bearing
I have a 88 gt and it does it when the clutch is pressed in push a little it stop all the way then the noise come back
Yer got simaler noise. Goin to mechanics hope it is clucth bearing. Cos gearbox seems fine n so does diff. Thanx
I was driving, felt a pop when i press down on pedal trying to shift, it was loose ,i had no pressure it got stucknin neutral,,a nice man pushed my car off busy highway ,,
I'll be totally honest with you you should be very thankful that you have a friend like that I wish I knew somebody who would save me money out fix him up my truck I'm an electrician and I saved a ton of people a lot of money doing electrical work for practically nothing I don't believe in Good Karma but I sure do believe in Bad Karma!!
I drive a bullitt mustang I had my clutch n flywheel replaced and I paid more than 400 for a clutch n like 3oo for the flywheel n the throw out bearing all nice n new n my car does horrible dragging noise like grinding noise I but it does engage good but noise is annoying
Did it end up being a bearing? I have a similar noise and think it might be the clutch springs
250 is a steal for the work. Online quotes are over 1k.
Exactly, just had a whole kit installed on my v6 06 and about 1200 parts n labor,, hope I didn't get screwed.
when you had this problem could you feel a vibration in the steering wheel?
+Bradley Pfeffer no, nothing was wrong with the steering wheel
Throw out bearing is completely gone out , you have to remove the transmission clutch bell housing area is where these throw out bearings lay it sounds like one of those has gone out
My 2000 ford ranger 3.0 make a noise only when going up a hill or when its cold but goes in gear fine
Mines makes a soft humming noise, and gets softer to almost nothing when i press it in.
Had this same noise, I mean exactly the same, replaced clutch and all bearings and still had to noise, was getting scared at this point and shopping for a transmission. My buddy suggested pulling the starter and push starting it. Just to see. Starter. This entire time it was my starter. Hope this helps someone.
when I accelerate I have a high pitched noise coming from my clutch and when I press the clutch it stops. any ideas?
+Sammy Sheffield for sure the throw out bearing!!
same page
Sammy Sheffield not throwout bearing. It's the input shaft bearing. Throwout bearing makes noise when the clutch is pushed in. Input shaft bearing makes noise when clutch is out and goes away when clutch is in
I just jad same problem.. But i just change to all new clutch set include throw out bearing. Still sound although not loud,but the tork are so high i can even launch in 3rd gear.
I just put a new clutch kit on about 4 months ago, and now my clutch is squealing whenever I step on the pedal. It kind of sound like worn-out brake pads. I have no idea what's going on
did you ever figure out what it was? mine started doing it yesterday even though i replaced the clutch, throwout bearing, pilot bearing, resurfaced flywheel, greased and torqued things down properly about a year ago. praying it is the cable wearing out
How often do you need to replace the clutch ? Miles wise?
Every 75k miles. However that depends in how fast you wear it out too.
Thanks
Check the throw out bearing or roller bearings whn its wines that means it worn out
Every time check dealer parts department first. Me and my brother were working on 2nd gen Toyota Supra with bad clutch, I ordered one from NAPA $318 , but asked my brother to call the Toy dealer to find out what's the price on OEM Toyota clutch, Surprise $180+ tax, so I cancelled the NAPA order an got the OEM clutch kit $100 cheaper.
Check diller and online deals first.
My 03 GT just had this issue lately until today, it started squealing super loud, I couldn’t get it into gear without forcing it a ton, just dropped it off at the mechanic today, hope it’s not tooo expensive…
Update: The problem was what I thought it was, Throwout bearing. Just decided to get the whole clutch replaced
@@Mustangkev918 thanks for update how much did it cost
@@FlashStashh total was like $700
Did u fix it?
+Daniel R. Getting the kit today in the mail. Should have a video up soon
My 1995 stang does the SAME thing :(
Sell that pos
so does my 74 bug
While you're at it inspect the pivot ball, rear main seal and clutch fork or better replace it just to be sure.
Same thing happened to me but I kept driving it and the bearing broke into 2 and wouldn't go into gear anymore, you should make a how to fix it video
+Daniel R. Dang that sucks dude. I just received all the parts for the clutch kit but I don't have the tools to drop the transmission and fit it myself. I have to take it to a shop. Eventually I plan to have enough tools to work on my own cars
Daniel R. so did u find out what was the problem
sounds like a dragon breathing