Professional Maintenance Products I Recommend Engine Oil Flush PRO - amzn.to/45egARf Engine Oil I recommend - Liqui Moly 5W30 (Made in Germany) - amzn.to/46htcs6 Wear Additive I recommend - Ceratec - amzn.to/3Q6uYqF Gasoline System Cleaner PRO - amzn.to/3tjXcVT Diesel System Cleaner PRO - amzn.to/3rCYUkK Diesel DPF Protector Additive - amzn.to/3RGJeaI
Ha I keep trying to get my gf to drive my car but she always asks me if I like my car because if she drove it I wouldn't like it anymore because the transmission would be on the ground lol
LOL my car is showing me 3 of the 5. I don't notice slipping, but I do notice the vibration when releasing it, and sometimes it will jerk, kind of like it wants to stall, when I'm starting to move. Thanks for the video.
@@99VehiclesTV I got a 2010 Audi A4 and here and there it's only in first gear when I let the clutch out it feels like the wheels are shaking like when you pull out have any ideas on that? I got scared and didn't drive the car and thought it was a clutch slipping I didn't drive the car for over a month I took it out yesterday and I pulled out in first gear like usual at least six times and it didn't do it... which is weird but like I said I let go of the clutch it's only in first gear and the wheels felt like it was shaking... Thank you in advance
It is important to mention that some symptoms mentioned might have absolutely nothing to do with the drive train, but actually related to engine performance being to lean/rich. Sometimes it is just down to the fact that some newer drivers dont apply enough RPM when moving off causing the engine to labour.
My 96 Ford Probe SE has been having this issue, it only happened after a 20-30 min drive though. Almost never when just starting the car. Has anyone else replaced their clutch and gotten the issue fixed?
Is it normal that the vibration is not always appears? I just decided to go to nissan service to change the clutch set as i had vibration in 1st gear when i start. But since then the problem disappeared. Only 85k km in my nissan pulsar 1.5 dci. I bought it 1 year ago so I dont know how it was used before unfortunately.
What about when a car is very slow when moving and engine revs without going anywhere while in gear? I set off from lights and when i release the clutch the engine revs high before its normal again. Also plz diagnose a flywheel fault thanks. my clutch is kaput i guess, i have the sl;ave cylinder and clutch plate and frame already to replace.
Just an update. It was the clutch lol. The old clutch was so worn the metal plate under the friction part was pointing up having snapped away from its studs lol. WOW i thought, but all good now. Used the C20LET clutch which is more robust for mapping etc.
@@ungestrecktOfficial EXACTLY RIGHT LOL. Also the clutch plate was in an awful state, the metal part coming away from the actual plate. How it went into gear fooled me.
I have a 2001 Audi TT Quattro 1.8 turbo. The pressure on my clutch is fine I can push it all the way to the floor comes all the way back up good pressure. When I push the clutch all the way down and put it in 1st gear it doesn't engage at all now my engine just revs.The 6 speed stick shift shifts every gear fine except that needed high revs or I'll lose speed while driving.I bought it and drove it home last week after driving it for an hour home I could smell a burning smell from the front driver side tire area.I knew it would need something with the clutch done to it when I bought it.So getting it to move from being parked and putting in it in 1st gear to get it going it has to be between 3000 and 3500 RPM in 1st gear just to get it moving and it's the same RPMs with each gear while I'm driving on the road or I will lose speed.The next day it got worse with the high revs to get it moving again but now higher motor revs to get it out my driveway then it had to go to between 4000-4500 RPMs in 1st gear from parked to get it going now. But the 3rd day it doesn't move at all now when I press the clutch down as I said there's a lot of clutch pedal there nice pressure feeling.The engine RPMs is going too high now and doesn't move at all I don't want the engine to scream cause it's obviously not going to move and now I can't drive it.In your opinion do you think it's the clutch? Should I just get a full Clutch kit? or you think it's a flywheel problem? Please respond this is driving me insane. Thank you very much.
Do any one know pls let me know I was driving my car and in the third gear I press the clutch down and it went completely down didn’t come back then I tried to bring it up with my hands when it was again up then it hanged and doesn’t go donwn.hope y’all understand me.?
My word I have the same problem in the mornings I can't even put my car in gear then it stalls or when am driving from gear 1 to gear 4 it jerks ( when I accelerator)
Hi, I got some problem, when I drive hard I mean on the up hil the rpm it’s going up, and I need to remove the gas and put again, that can be the clutch problem? Thanks
How come every time I put in the clutch all the way, it doesn’t want to go into first? If I force it in, it either grinds, or goes in, but it makes a loud noise. But every time I go from neutral to reverse, it only grinds, it doesn’t go into any gear without grinding. That’s why I keep turning it on in gear, which isn’t good.
look up "rev matching" that should give the answer to your question. 1st gear is really only used to get the car moving. You never want to shift into first when driving normally, because it's fucking bad for your clutch, shifting to first (or reverse) at "high" speeds is considered money shifting. I reckon your car manufacturer implemented some safety percussion into your car, preventing the driver to carelessly shift into first, that's why it won't go in. the grinding sound is the sound of the clutch getting fucked up.
If the reverse gear refuses to engage wait for a few seconds , go into first gear , go just a little forward and then the reverse gear should not crunch , works for me every time . It' a good habit not to switch between 1st and reverse ( and viceversa ) too fast or you 'll hear that grinding noise .
@@-pdp-3779 very true, one way to test is to coast at around 30 mph and hold the gear towards first gear and slowly reduce the speed with the brakes. You should find that as you slow down the gear slips into place when safe speed is met. it's the equivalent of having "do not drink" on bleach but that is none of my business.
That mean the transmission bearing is bad or your pilot bearing is bad, that happen to me too at first I thought it was the pilot bearing but it was the transmission gear hope that helps you
Hey I have a question my clutch pedal goes stiff like really stiff and sometimes it gets stuck like I can't press it down at all or it won't come up randomly, what could the cues be
yo bro.. i have golf mk4 1999 i will never buy new cars anymore just cars before 2000 But now my golf sometimes 1. shifts gears when i start it 2. it is not grabbing any gear 3. if i turn it off it shifts like new car 4. IF i get it in gear when it is off then turn it on , the car is driving slowly without me changing gears i dont know how to explain it is sooo weird i bled the liquid from the system and put inside new fluid... But when i checked the canister it was full the master and slave cylinders i checked also everything i know i did. So plz can you think of anything other that i should do ???? ( it is so important for me to have a car Tuesday's i drive myself to hospital 🙏🙏🙏 respect bro )
My mechanic friend said my clutch is done. But I don’t know if it’s necessary to replace the whole thing, adjust something, or replace just a part. Not sure it’s worth to put over $1k into this heap of junk. Lasted me a good long while though. But this is why it’s important to have backup plans for car emergencies! Lol. Heed the warning, people
Please advice: When driving in 4th. and 5th. gear between 2000-2500 rpm there is a rattling noise under the car. everything is check and doube check only suspect is the clutch set becouse the sound started after replacement. is a Honda Jazz1.4 2004. .
I read somewhere that one of the signs is also when driving uphill that a burning smell coming out of the cabin could indicate a slipping clutch. This is strange to me because I don't notice any difference in the drivability or power of the car. Have you heard this?
hi hope you doing fine when i pres my clucth padel wining sounds comes and when i press padal car gets slow speed what do you think whats wrong with it and some time in 3rd gear car staret hikups as well not cruent break but like car will shut in soon and its not having energy like its in high gear but revs are less
I get a screeching sound when pulling away in 1st gear sometimes the car shakes a little. This is worse on a hill start and in cold weather, the car drives normally in all other gears and the biting point is still in the middle of the pedals travel. I have been told it might be the one way bearing in the clutch. What do you think the problem could be?
Hello! I own Volvo s60 d5 2006, and when engine is cold I hear rattling noise behind front left wheel. When I press clutch pedal, the sound is gone, or when it starts to rise temperature. Sometimes it makes noise, sometimes it don't. Shifting is normal, can't feel vibration or clutch pedal been hit while its pressed. Cheers!
Okay , I have a 1993 Toyota pickup 5 speed 4 wheel drive v6 . I started to notice it was getting hard to put in gear and reverse it would grind to go into than the other day I was driving to work and I couldn't put it in gear without shutting it off and starting it again I noticed that the clutch cylinder fluid was black what does that mean?
My clutch acts weird after like 20 ish minutes of driving it just keeps getting harder and harder to get in gear eventually it won’t be able to go in 1st 2nd 3rd haven’t tried 4th or 5th reverse works sometimes the clutch is also noisy when it gets like that I should replace the clutch throw out pilot pressure plate and flywheel all right ?
mine has a burnt smell inside the car when driving after like 10 mins, and also when I'm in 3rd of 4th gear and try to accelerate fast, as soon as it hits like 40mph the gear kinda slips? and it's like in neutral? so the rpm is very high (since I'm pressing the gas) but I'm no longer actually accelerating... and then when I apply brake and come down to like 20mph it goes back to normal. any help is appreciated thanks.
hello, nice video. i would like to ask some tips.. my car is having a hard and difficulty during climbing uphill, even in the lower gear.. imean, almost no power at all. Is it a clutch problem? Note: i just recently replaced the fuel filter.
Start engine with handbrake ON and clutch down. Keep hand brake on and try to set off in first gear. Car should stall. If it dosent stall, your clutch is gone.
I don’t get stalks, bought another mk4 with a clutch slipping.. is soft to press, but will go high in the revs and no drive in 3rd gear.. going to change, is it recommend to change the gearbox also? (I have a spare gearbox)
Please help my clutch juddders and feels very sharp when pulling away on a cold start . When the vehicle is warm it fine. My car is a Toyota Avensis 2.2 diesel year 2010 and I believe is has a dual mass fly wheel. Thanks mo
Hi, I test drove a 2018 mustang ecoboost and it shifted so easily. Clutch slid into gears very easy. I then tested a gt and it took alot more to put it into first gear. Also when shifting it Jerked alot. Not sure ifbit was due to being rusty at manual but these were test driven 1hr apart. I'm in the process of buying the gt
I have a nissan 2005 ser spec V 2.8 my only problem is that my clutch pedal it stays low , sometimes i have to put my foot under the clutch to put it back to normal, but my car doesnt have any of those problems u were mentioning, it just stays low when driving for a long period of time, so would like to know could it be the pressure plate that it needs to be changed or could it be perhaps the clutch pedal that needs to be adjusted. Thanks
Thanks for your videos,and I have a problem to solve out In my Hilux cab,that is, when I start the engine it shudders abnormally.and also switched off. Is it a pressure plate problem
What if my gears are sticking? I can't change gears, I can press the clutch down with no problem but when driving it;s like it is almost not going to go, now I parked it, the gears won't even work.
My clutch pedal has no foot pressure and comes back freely. I do not know what is wrong with it. I don’t know if it’s something with the hydraulics or what the deal is
My clutch feels fine I just get a burning smell all the time and I know it's not me I've been driving a manual for over 5 years transmission fluid? I feel alot of heat through the transmission too
I just had my clutch plate go out. It was a intermittent problem. Turn out to be the center springs in the plate. Some times it drove well. Other times I couldn't get in gear. One spring was gone and three more about ready to go.
What can be the damage on my car. I was driving along highway and as I engage gear number six and accelerated, my car had a high rave and was not in gear. I then stopped instantly and checked underneath, there was leaking oil on the ground which I don't know whether it's gear oil or engine oil. After that I tried to start the car and engage gear but the car was not moving. Later I checked engine oil there was nothing and brake fluid there was nothing again. What could be the problem
Okay well I just installed the clutch disk now I have a clutch again but when I push it in and try to shift it wouldn't in gage with out grinding can anybody tell me what to do or what the problem is it would be appreciate thanks
Hi, I know this video is older but I hope I can get a reply. So I had a question, the problem I’m having is when I’m taking off from first gear, in the Focus RS, the Engine/ Car shakes a bit. And also I’m getting burnt smell after some driving, but no smoke, just the smell. I understood your explanation, it’s the Pressure Plates, Idk if you can elaborate cause I know it’s NOT the Motor amounts. More importantly can I still drive the car while I save money for a new Clutches. I would greatly appreciate an Answer!!!
My Chevy aveo 2004 was running before the master cylinder was replaced now it don’t move. In any gear, I’ve. Been stress becuz the car is my only way of working.
...my nissan vannet ..i have reallywodered why it is shaking when i slowly engauge the clutch..man you have helped me big time loke you from kenya thanks for you educative..show..i know now i need a clutch plate .
Hi - thanks that's great info ! Question : I have a pretty old berlingo and the clutch makes a loud clicking sound often when I press the pedal... the garage just said I have to replace the whole transmission... any thoughts?
I need help? I'm not sure if my clutch is slipping or trans I have an 2012 civic si and when I step on the gas in any gear the rev gets louder but the car doesnt go any faster? Anyone got an answer for me please and thank you!? Btw only had the car for about 5 months and it's been like that since I bought it basically smh
Professional Maintenance Products I Recommend
Engine Oil Flush PRO - amzn.to/45egARf
Engine Oil I recommend - Liqui Moly 5W30 (Made in Germany) - amzn.to/46htcs6
Wear Additive I recommend - Ceratec - amzn.to/3Q6uYqF
Gasoline System Cleaner PRO - amzn.to/3tjXcVT
Diesel System Cleaner PRO - amzn.to/3rCYUkK
Diesel DPF Protector Additive - amzn.to/3RGJeaI
another sign is if your wife / girlfriend drives it, then you need a new clutch!
Ha I keep trying to get my gf to drive my car but she always asks me if I like my car because if she drove it I wouldn't like it anymore because the transmission would be on the ground lol
100 % true
I think mine is completely gone cause the car doesnt stall in 1st or 5th.
yeah its fucked lol
Yep lol 😆
well then..my friend you've got yourself an automatic :)
kelvin hunk lmfaoooooo
I think mine is gone (
Please add samples of the sounds.
LOL my car is showing me 3 of the 5. I don't notice slipping, but I do notice the vibration when releasing it, and sometimes it will jerk, kind of like it wants to stall, when I'm starting to move. Thanks for the video.
I have the same problem
very informative! good job
Thanks! 💪🏻
@@99VehiclesTV I got a 2010 Audi A4 and here and there it's only in first gear when I let the clutch out it feels like the wheels are shaking like when you pull out have any ideas on that? I got scared and didn't drive the car and thought it was a clutch slipping I didn't drive the car for over a month I took it out yesterday and I pulled out in first gear like usual at least six times and it didn't do it... which is weird but like I said I let go of the clutch it's only in first gear and the wheels felt like it was shaking... Thank you in advance
Improve your english brother
It is important to mention that some symptoms mentioned might have absolutely nothing to do with the drive train, but actually related to engine performance being to lean/rich. Sometimes it is just down to the fact that some newer drivers dont apply enough RPM when moving off causing the engine to labour.
I press my clutch and the rpm goes down, car shakes a bit and sometimes stalls when i press the clutch. Thoughts?
Nemoz_BB6 Mine too need to replace the whole clutch kit buddy i'm going to do it. i have volvo v50 2012
You have to feather the gas when pressing the clutch in and launching from a stop.
Mine vibrates for a second, rpms drop a bit when i let go of the clutch in neutral
Worst case you might have crank walk.
My 96 Ford Probe SE has been having this issue, it only happened after a 20-30 min drive though. Almost never when just starting the car. Has anyone else replaced their clutch and gotten the issue fixed?
Thank you! Very helpful! We could use some noises though of what the clutch sounds like when worn!
Is it normal that the vibration is not always appears? I just decided to go to nissan service to change the clutch set as i had vibration in 1st gear when i start. But since then the problem disappeared. Only 85k km in my nissan pulsar 1.5 dci. I bought it 1 year ago so I dont know how it was used before unfortunately.
Very helpful. My 2008 ford focus is doing that
What about when a car is very slow when moving and engine revs without going anywhere while in gear? I set off from lights and when i release the clutch the engine revs high before its normal again. Also plz diagnose a flywheel fault thanks. my clutch is kaput i guess, i have the sl;ave cylinder and clutch plate and frame already to replace.
Just an update. It was the clutch lol. The old clutch was so worn the metal plate under the friction part was pointing up having snapped away from its studs lol. WOW i thought, but all good now. Used the C20LET clutch which is more robust for mapping etc.
My clutch is kaput i guess 😂
@@ungestrecktOfficial EXACTLY RIGHT LOL. Also the clutch plate was in an awful state, the metal part coming away from the actual plate. How it went into gear fooled me.
I have a 2001 Audi TT Quattro 1.8 turbo. The pressure on my clutch is fine I can push it all the way to the floor comes all the way back up good pressure. When I push the clutch all the way down and put it in 1st gear it doesn't engage at all now my engine just revs.The 6 speed stick shift shifts every gear fine except that needed high revs or I'll lose speed while driving.I bought it and drove it home last week after driving it for an hour home I could smell a burning smell from the front driver side tire area.I knew it would need something with the clutch done to it when I bought it.So getting it to move from being parked and putting in it in 1st gear to get it going it has to be between 3000 and 3500 RPM in 1st gear just to get it moving and it's the same RPMs with each gear while I'm driving on the road or I will lose speed.The next day it got worse with the high revs to get it moving again but now higher motor revs to get it out my driveway then it had to go to between 4000-4500 RPMs in 1st gear from parked to get it going now. But the 3rd day it doesn't move at all now when I press the clutch down as I said there's a lot of clutch pedal there nice pressure feeling.The engine RPMs is going too high now and doesn't move at all I don't want the engine to scream cause it's obviously not going to move and now I can't drive it.In your opinion do you think it's the clutch? Should I just get a full Clutch kit? or you think it's a flywheel problem? Please respond this is driving me insane. Thank you very much.
good to know my clutch is good, once it goes out I'm going aftermarket though
sitting in chair telling me , a signs of slipping clutch no thanks, i rather watch someone in car, and show me ...not tell me... Goodbye
Good morning my friend please I have a question when I engage my gear 5 I always hear a noise different from the rest gear what do you think I do
Then the 5th gear in the gearbox is damaged or the sychronizer ring
Do any one know pls let me know I was driving my car and in the third gear I press the clutch down and it went completely down didn’t come back then I tried to bring it up with my hands when it was again up then it hanged and doesn’t go donwn.hope y’all understand me.?
My clutch pedal is right down on the floor of my Toyota audio 1400 is this a sign of clutch wearing out .
My word I have the same problem in the mornings I can't even put my car in gear then it stalls or when am driving from gear 1 to gear 4 it jerks ( when I accelerator)
good video. my clutch is making a squealing noise just before it engages. According to the video there may be a problem with the throwout bearing
I know I am quite randomly asking but do anybody know a good place to stream newly released movies online?
@Spencer Hugh lately I have been using flixzone. Just search on google for it :)
@Gary Guillermo definitely, I've been using Flixzone for months myself =)
@Gary Guillermo Thanks, I signed up and it seems to work :D Appreciate it!
@Spencer Hugh No problem :D
I can't hear you because of the background noise. Either get rid of it or turn it down quite a bit.
I didn't find the music distracting at all. 🤷🏻♂️
Meam , dupa accent i couldn't quite pinpoint the accent, si nu eram 100% sigur , da dupa ce am vazut numerele la masina, bingo. 😆
Most clutches are now self-adjusting. So it will work one day & not the text.
Hi, I got some problem, when I drive hard I mean on the up hil the rpm it’s going up, and I need to remove the gas and put again, that can be the clutch problem? Thanks
Nyc n soft clear talk
How come every time I put in the clutch all the way, it doesn’t want to go into first? If I force it in, it either grinds, or goes in, but it makes a loud noise. But every time I go from neutral to reverse, it only grinds, it doesn’t go into any gear without grinding. That’s why I keep turning it on in gear, which isn’t good.
look up "rev matching" that should give the answer to your question. 1st gear is really only used to get the car moving. You never want to shift into first when driving normally, because it's fucking bad for your clutch, shifting to first (or reverse) at "high" speeds is considered money shifting. I reckon your car manufacturer implemented some safety percussion into your car, preventing the driver to carelessly shift into first, that's why it won't go in. the grinding sound is the sound of the clutch getting fucked up.
If the reverse gear refuses to engage wait for a few seconds , go into first gear , go just a little
forward and then the reverse gear should not crunch , works for me every time .
It' a good habit not to switch between 1st and reverse ( and viceversa )
too fast or you 'll hear that grinding noise .
@@-pdp-3779 very true, one way to test is to coast at around 30 mph and hold the gear towards first gear and slowly reduce the speed with the brakes. You should find that as you slow down the gear slips into place when safe speed is met. it's the equivalent of having "do not drink" on bleach but that is none of my business.
Sorry I said my Toyota was an audio no it’s an Auris . With a clutch that goes to the floor . Why is this ?
Hi what if you can hear a noise like slight whine then goes away when you press the clutch in when stationary?
That mean the transmission bearing is bad or your pilot bearing is bad, that happen to me too at first I thought it was the pilot bearing but it was the transmission gear hope that helps you
My double cab bakkie can't engage in gears what is the problem
I know h seattle
Does it affects the power of the car especially in climbing hill?
Yeah you may experience a lack of power
My cluch is running out over night there is no cluch after putting in gear then start its ok after a while
Hey I have a question my clutch pedal goes stiff like really stiff and sometimes it gets stuck like I can't press it down at all or it won't come up randomly, what could the cues be
That could be the master cylinder.
bravo ma! si pe engleza esti bun. Multumim pentru toate video-urile pe care le faci
yo bro..
i have golf mk4 1999 i will never buy new cars anymore just cars before 2000
But now my golf sometimes
1. shifts gears when i start it
2. it is not grabbing any gear
3. if i turn it off it shifts like new car
4. IF i get it in gear when it is off then turn it on , the car is driving slowly without me changing gears i dont know how to explain it is sooo weird
i bled the liquid from the system and put inside new fluid... But when i checked the canister it was full the master and slave cylinders i checked also
everything i know i did.
So plz can you think of anything other that i should do ????
( it is so important for me to have a car Tuesday's i drive myself to hospital 🙏🙏🙏 respect bro )
I took my car to get an oil change and the garage said I needed a new clutch but I never have noticed any problems yet...
Christian an oil change ?
Its optional
My mechanic friend said my clutch is done. But I don’t know if it’s necessary to replace the whole thing, adjust something, or replace just a part. Not sure it’s worth to put over $1k into this heap of junk. Lasted me a good long while though. But this is why it’s important to have backup plans for car emergencies! Lol. Heed the warning, people
My car doesent stall in any gear when I let go of the clutch and also won’t move Just revs up and slowlyyyyy starts moving Rpms go flying up
Patrick Frias clutch is gone
Congratulations you own an automatic now
A have a 2001 renault Laguna with 39 miles. The pedal is really high and the engine is stalling with noting
my truck vibrates when I turn drive off in morning only.. after thru out the day no more vibration. clutch worn out?
Mne does the same
No bad sparkplug
Subbed because of this video
Please advice: When driving in 4th. and 5th. gear between 2000-2500 rpm there is a rattling noise under the car. everything is check and doube check only suspect is the clutch set becouse the sound started after replacement. is a Honda Jazz1.4 2004.
.
I read somewhere that one of the signs is also when driving uphill that a burning smell coming out of the cabin could indicate a slipping clutch. This is strange to me because I don't notice any difference in the drivability or power of the car. Have you heard this?
hi hope you doing fine when i pres my clucth padel wining sounds comes and when i press padal car gets slow speed what do you think whats wrong with it and some time in 3rd gear car staret hikups as well not cruent break but like car will shut in soon and its not having energy like its in high gear but revs are less
The whining is the clutch bearing. It's had it. You can replace it on its own but not a good idea. Best to replace whole clutch
Nice video! Keep it up!!!
Golf 6 tsi. The car vibrates when taking off, but it drive fine and pull fine. I replace the dogbone mounting but still experiencing that problem
I get a screeching sound when pulling away in 1st gear sometimes the car shakes a little. This is worse on a hill start and in cold weather, the car drives normally in all other gears and the biting point is still in the middle of the pedals travel. I have been told it might be the one way bearing in the clutch. What do you think the problem could be?
What car did you have ? think I have the issue rn but not sure if it’s the clutch or the transmission
what if the clutch iss jsut super difficult to push in? what do i do about it?
adriel vega mine does the same
@@cristianlopez-st7zg ohh okk so its normal
adriel vega idk but I heard it’s going bad so maybe you’ll have to replace it soon
@@cristianlopez-st7zg ohh dammm loool
I have difficulty getting into 1st gear! Land Rover Freelander 1999 2.0
Thank you this narrowed everything down
You can stop the oil leak then burn the excess oil off by purposely slipping the clutch a bit it will come roght after a while.
Double Flaccid.
Hello!
I own Volvo s60 d5 2006, and when engine is cold I hear rattling noise behind front left wheel. When I press clutch pedal, the sound is gone, or when it starts to rise temperature. Sometimes it makes noise, sometimes it don't.
Shifting is normal, can't feel vibration or clutch pedal been hit while its pressed.
Cheers!
I think thats a engine problem, i had a 2007 baleno started giving the same problem and that's what it was diagnosed with
@@flowerhobi1673 I also think it's about engine mounts,but it's just guessing..
Pilot bearing in the transmission
when my car is in nuetral, it sounds like something scraping?
go tee that’s your transmission lol
@@patrickfrias5215 the transmission runs good so...🤷🏻♂️
Dual mass flywheel
If It’s a metal scraping sound, 99% sure It’s dmf
"Double flask" so thats why my car keeps moving left and right when I drive!
Okay , I have a 1993 Toyota pickup 5 speed 4 wheel drive v6 .
I started to notice it was getting hard to put in gear and reverse it would grind to go into than the other day I was driving to work and I couldn't put it in gear without shutting it off and starting it again I noticed that the clutch cylinder fluid was black what does that mean?
Um there's no audio?
U r so calm
My clutch acts weird after like 20 ish minutes of driving it just keeps getting harder and harder to get in gear eventually it won’t be able to go in 1st 2nd 3rd haven’t tried 4th or 5th reverse works sometimes the clutch is also noisy when it gets like that I should replace the clutch throw out pilot pressure plate and flywheel all right ?
Gota get my clutch done it just wont stall in gear 1 starting to think its an automatic 😂😂
I had no idea this was possible. Thanks for ur comment!
mine has a burnt smell inside the car when driving after like 10 mins, and also when I'm in 3rd of 4th gear and try to accelerate fast, as soon as it hits like 40mph the gear kinda slips? and it's like in neutral? so the rpm is very high (since I'm pressing the gas) but I'm no longer actually accelerating... and then when I apply brake and come down to like 20mph it goes back to normal. any help is appreciated thanks.
The question is 66 vehicles or 99 vehicles? There is 99 PROBLEMS here...
hello, nice video. i would like to ask some tips.. my car is having a hard and difficulty during climbing uphill, even in the lower gear.. imean, almost no power at all. Is it a clutch problem?
Note: i just recently replaced the fuel filter.
Start engine with handbrake ON and clutch down. Keep hand brake on and try to set off in first gear. Car should stall. If it dosent stall, your clutch is gone.
Going up a hill in 3rd n 4th and slipps a sign?
i think its time for me because the last time i changed it was febuary of 2018
Me too
I don’t get stalks, bought another mk4 with a clutch slipping.. is soft to press, but will go high in the revs and no drive in 3rd gear.. going to change, is it recommend to change the gearbox also? (I have a spare gearbox)
Please help my clutch juddders and feels very sharp when pulling away on a cold start . When the vehicle is warm it fine. My car is a Toyota Avensis 2.2 diesel year 2010 and I believe is has a dual mass fly wheel. Thanks mo
if their is wear on clutch disk, does it mean that the disk is now smooth, without any friction?
What does it mean when my car shifts out of 1st and kind of jolts? Is it the clutch pack? Or possibly something else?
Could be the mechanism that is connected with your shifter to change gears. Or maybe some gear must have wears.
Hi, I test drove a 2018 mustang ecoboost and it shifted so easily. Clutch slid into gears very easy. I then tested a gt and it took alot more to put it into first gear. Also when shifting it Jerked alot. Not sure ifbit was due to being rusty at manual but these were test driven 1hr apart. I'm in the process of buying the gt
Totally irrelevant but thanks for sharing
I have a nissan 2005 ser spec V 2.8 my only problem is that my clutch pedal it stays low , sometimes i have to put my foot under the clutch to put it back to normal, but my car doesnt have any of those problems u were mentioning, it just stays low when driving for a long period of time, so would like to know could it be the pressure plate that it needs to be changed or could it be perhaps the clutch pedal that needs to be adjusted. Thanks
My new car tends to vibrate when pick up from the car is stationary. Is it the symptoms of clutch sliping?
Thanks for oil leak info
My car upper clutch cylinder is failing again n again.Release bearing I have already replaced,pressure plate and disk is ok too.Any suggestions??
Hydraulics issues
hi, my manual car jerks a lot when launching in 1st gear but when lauched in 2nd it goes smoothly any suggestion
Thanks for your videos,and I have a problem to solve out In my Hilux cab,that is, when I start the engine it shudders abnormally.and also switched off. Is it a pressure plate problem
What if my gears are sticking? I can't change gears, I can press the clutch down with no problem but when driving it;s like it is almost not going to go, now I parked it, the gears won't even work.
Thanks really useful 😉
My clutch pedal has no foot pressure and comes back freely. I do not know what is wrong with it. I don’t know if it’s something with the hydraulics or what the deal is
My clutches are bad and Ford tried to make me replace the whole transmission
My clutch feels fine I just get a burning smell all the time and I know it's not me I've been driving a manual for over 5 years transmission fluid? I feel alot of heat through the transmission too
I just had my clutch plate go out. It was a intermittent problem. Turn out to be the center springs in the plate. Some times it drove well. Other times I couldn't get in gear. One spring was gone and three more about ready to go.
What can be the damage on my car. I was driving along highway and as I engage gear number six and accelerated, my car had a high rave and was not in gear. I then stopped instantly and checked underneath, there was leaking oil on the ground which I don't know whether it's gear oil or engine oil. After that I tried to start the car and engage gear but the car was not moving. Later I checked engine oil there was nothing and brake fluid there was nothing again. What could be the problem
Okay well I just installed the clutch disk now I have a clutch again but when I push it in and try to shift it wouldn't in gage with out grinding can anybody tell me what to do or what the problem is it would be appreciate thanks
Thanks!!!
Hi, I know this video is older but I hope I can get a reply.
So I had a question, the problem I’m having is when I’m taking off from first gear, in the Focus RS, the Engine/ Car shakes a bit. And also I’m getting burnt smell after some driving, but no smoke, just the smell.
I understood your explanation, it’s the Pressure Plates, Idk if you can elaborate cause I know it’s NOT the Motor amounts.
More importantly can I still drive the car while I save money for a new Clutches. I would greatly appreciate an Answer!!!
My Chevy aveo 2004 was running before the master cylinder was replaced now it don’t move. In any gear, I’ve. Been stress becuz the car is my only way of working.
Did you get help?
Thanks
BAAA NU STIAM CA ERAI ROMAN
...my nissan vannet ..i have reallywodered why it is shaking when i slowly engauge the clutch..man you have helped me big time loke you from kenya thanks for you educative..show..i know now i need a clutch plate .
I am from 🇰🇪 kenya
Hi - thanks that's great info ! Question : I have a pretty old berlingo and the clutch makes a loud clicking sound often when I press the pedal... the garage just said I have to replace the whole transmission... any thoughts?
As a paranoid individual on anything that is expensive or hard to get to this helped me determine that my clutch is in fact ok
why is my car only jumping or shaking in 1st or reverse
I need help? I'm not sure if my clutch is slipping or trans I have an 2012 civic si and when I step on the gas in any gear the rev gets louder but the car doesnt go any faster? Anyone got an answer for me please and thank you!? Btw only had the car for about 5 months and it's been like that since I bought it basically smh
it slips
I’m thinking my clutch went out. I can’t even put it into a gear. Or start it, even though the car tries to start. 68k miles, 2013 Mini Cooper S
Check you clutch fluid
Salut, am ambreiajul foarte tare, merita sa verific sistemul hidraulic sa nu aibe aer? sau sigur trebuie sa schimb neaparat ambreiajul?
1992 Honda clutch slips and barley moves when accelerating
Same
Did you get it fixed?
What if a car comes with self adjusting clutch?
What about shipping just in reverse