Yeah well GM needs to go back to the drawing board because this N/A 598BBF laid down 1108hp933tq ruclips.net/video/dIrvPfrnXjM/видео.htmlsi=Jkb6XmvBPD0hPe4f
Theoretically speaking, if it uses a crank sensor and has fuel injection and we added the other necessary hardware, what would keep us swapping an LS out of a truck that came factory with an LS and putting this engine in? It should be able to then run off factory computer...right? With a tune of course.
**Waves hands vaguely** You could. It would have to be with a Gen IV PCM as it is a 58x reluctor and 4x cam signal as Chevrolet Performance uses this component to make it happen: sdparts.com/i-24498638
@@Sdpartscenter ok if you need me, I'll be in my driveway looking at my LS Camaro and my LS 2500 truck and wondering how important gas milage really is to me.
@@stephenhodge6441 all depends how they have it set up with limits on rpm or hp it may be crypted so you can’t mess with till out of warranty and then go like hell , but yes I would think it would and it’s already fuel injected so would have all the sensors. The first one came out was with carb at 29K then second verdin came out with injection and at 32K , it’s just one bad bad boy with no super charger or twin turbos , old school with fuel injection and all the sensors .
In Australia we have 98 octane fuel ⛽️ So we could ask GM 4 a retune . Another 2 Options l would like 2 see r an Aluminium Block on this & a Tunnel Ram from Wilson Manifolds Billet 4 Marine Use . CHEVROLET PERFORMANCE have done a marvellous job 👏 here 👏 👍 😀
@@marquism2920 yeah it’s a movie star, it’s a good guy, bad guy, stranger, average joe. It can play any role. Feeling big and luxurious, yet cheap and flimsy. Truly an American super star! CHEVROLET IMPALA: 1958-2020 You will be missed😢
How much taller is the deck than a normal BBC? Why are the exhaust valves only 1.80? A 1967 L88 had 1.88 EV. That intake system is a work of art! Are there any differences between this and the COPO 632? Thanks for posting.
It's the same 632 as in the COPO. As far as the exhaust valve sizing, it probably wasn't necessary to go any larger and make up for it in the cam profile.
I’m rebuilding the engine in my truck and was needing some information on my parts list. Is there someone I can call and ask for. 2003 GMC Yukon XL 5.3.
It’s going in my Donzi 22’ closed bow I want to break the speed record for this boat which is 112 mph with 540 with a procharger at 800-850 hp and that zz632 should put me at 120 aleast out of box with Felpro sever duty marine head gadgets and bronze freeze plugs with lake water cooling .
Yes but it over$ 38,000 I could do a hell of a lot more with a junkyard motor and a turbo.... And still have enough money for transmission slicks extra slicks two crew members seven nights of McDonald's 14 cases of beer and a pack of cigarettes.....😁😎
It's a beast. It's too tall. You have to have a ridiculous hood on your car to run this. The intake, throttle body, and air cleaner look to be about 3 ft tall.
@@bigboreracing356 No .. Why cant you buy headers for that motor ?Im not being a smart ass like your trying to be I just ask a question. So do you have to make your own or something ?
Checked ✔️ on CHEVY'S WEBSITE & UR DYNO PULL OF THIS ENGINE FELL SHORT BY 20 FT LBS . SEND IT BACK AS DEFECTIVE. 1/-2 ft lbs But 20 ft lbs is False Advertising .
🤣 GM still showing Dodge and Ferd who the BIG BROTHA IS!...1000hp ALLL MOTOR!!!...GM RULES!!!
That's one of many reasons why I'm a chevy guy, chevy knows how to build horsepower with their blocks
Yes they do, copy Ford original designs! LS copied the Windsor and this is a 385 Ford copy. GO GM!!!
Yeah well GM needs to go back to the drawing board because this N/A 598BBF laid down 1108hp933tq
ruclips.net/video/dIrvPfrnXjM/видео.htmlsi=Jkb6XmvBPD0hPe4f
Theoretically speaking, if it uses a crank sensor and has fuel injection and we added the other necessary hardware, what would keep us swapping an LS out of a truck that came factory with an LS and putting this engine in? It should be able to then run off factory computer...right? With a tune of course.
**Waves hands vaguely**
You could. It would have to be with a Gen IV PCM as it is a 58x reluctor and 4x cam signal as Chevrolet Performance uses this component to make it happen:
sdparts.com/i-24498638
@@Sdpartscenter ok if you need me, I'll be in my driveway looking at my LS Camaro and my LS 2500 truck and wondering how important gas milage really is to me.
@@stephenhodge6441 all depends how they have it set up with limits on rpm or hp it may be crypted so you can’t mess with till out of warranty and then go like hell , but yes I would think it would and it’s already fuel injected so would have all the sensors. The first one came out was with carb at 29K then second verdin came out with injection and at 32K , it’s just one bad bad boy with no super charger or twin turbos , old school with fuel injection and all the sensors .
In Australia we have 98 octane fuel ⛽️
So we could ask GM 4 a retune .
Another 2 Options l would like 2 see r an Aluminium Block on this & a Tunnel Ram from Wilson Manifolds Billet 4 Marine Use . CHEVROLET PERFORMANCE have done a marvellous job 👏 here 👏 👍 😀
93 AKI is equivalent to 98 RON, available in europe and Australia
First gen 70-72 Chevy Monte Carlo 👍🏽
Please update the product
Wonder if this beast would fit in my ‘69 Vette! F’n A Cotton, F’n A. So cool. Thanks for sharing
I wonder how much a lower profile front feed throttle body intake would effect its power rating.
great engine!
Wonder what it would make, at 13 to 1, on race gas???
I seen that motor turn 9200 rpm at 1015 hp
Cuz I was sitting in my office half NAKED LOL😂😂😂😂 BUT SERIOUSLY BIG GUY THAT'S A COOL ASS ENGINE!
You think this will fit in a trackhawk?
Does GM offer a transmission that is rated for this power level?
I wonder if what happens when you put a super charger on it
More Horsepower
@@bfer95 YEEEEEEEAH
Spread port or 4.84?
Nice
I'm putting this bad boy in a 95 impala ss
GMC 79 would be better
@@Z_15.. 70-72 Monte Carlo would b wayyyy better
You guys are dumb 95 Impala all the way best car
@@isnotmaybe For sure the Impala is a true icon you rarely see both cars they mention in cinema movies today.
@@marquism2920 yeah it’s a movie star, it’s a good guy, bad guy, stranger, average joe.
It can play any role.
Feeling big and luxurious, yet cheap and flimsy. Truly an American super star!
CHEVROLET IMPALA: 1958-2020
You will be missed😢
How much taller is the deck than a normal BBC? Why are the exhaust valves only 1.80? A 1967 L88 had 1.88 EV. That intake system is a work of art! Are there any differences between this and the COPO 632? Thanks for posting.
It's the same 632 as in the COPO. As far as the exhaust valve sizing, it probably wasn't necessary to go any larger and make up for it in the cam profile.
No demon supercharger here😮
just two big balls and pure TESTOSTERONE!!!
Can it get ANY BIGGER?
Yes😈
That's what she said
Must be my xiwas always hitting the bottom on her
Yes gm made a larger one back in the 60s
Will it fit in a 1971 Chevelle without changing the stock hood ???
No
Best motor
Yup..... monster machine 🤩🤩🤩🤩🤩🤠🤠🇺🇸🇺🇸🤘🏻🤘🏻👍🏻
Damm I wish I had that kind of money to buy it . Me over here on my 3rd rv with low miles just to take out the 454s and they take a lot of space.
I’m rebuilding the engine in my truck and was needing some information on my parts list. Is there someone I can call and ask for.
2003 GMC Yukon XL 5.3.
Any of our guys in the performance parts side can help you on that. 1-800-456-0211
@@Sdpartscenter Thanks
I'm going to put this in my avalanche
🎉
On dyno it puts out 1015 hp !!
Sweet
Pump gas magic 🪄
Demon smasher
Put that in a Chevy Vega 😎
Vega? I like Those! My brother put a jet motor in his Vega last spring, and the chicks really dig him.
It’s going in my Donzi 22’ closed bow I want to break the speed record for this boat which is 112 mph with 540 with a procharger at 800-850 hp and that zz632 should put me at 120 aleast out of box with Felpro sever duty marine head gadgets and bronze freeze plugs with lake water cooling .
Yes but it over$ 38,000 I could do a hell of a lot more with a junkyard motor and a turbo.... And still have enough money for transmission slicks extra slicks two crew members seven nights of McDonald's 14 cases of beer and a pack of cigarettes.....😁😎
For Christmas past I guess I can't ask Santa Claus for one now I want one
It's a beast. It's too tall. You have to have a ridiculous hood on your car to run this. The intake, throttle body, and air cleaner look to be about 3 ft tall.
Go buy a Ford Freaking Pinto then😂
Twin turbo and E85 2000 hp at 15psi....easy
Crazy to think! Wonder what it’s going in? Any car would just Disintegrate if not built to match that for sure! What a motor
@@bigboreracing356 Richard Holdener made over 1500 hp on a stock bottom end junkyard 6.0 LS , I have no doubt the 632 could handle 15 psi and 2000 hp.
@@gsmith207 Chevrolet put it in the COPO Camaro @ P.R.I. this Dec. It looked great 👍
@@bigboreracing356 there's few 1000 hp engines that run on pump gas and have a warranty.
@@bigboreracing356 that actually seems very reasonable to me.
Needs a subscription to gas station 😂😂😂
So you cant even buy a header for that motor ? Wow
@@bigboreracing356 No .. Why cant you buy headers for that motor ?Im not being a smart ass like your trying to be I just ask a question. So do you have to make your own or something ?
Checked ✔️ on CHEVY'S WEBSITE & UR DYNO PULL OF THIS ENGINE FELL SHORT BY 20 FT LBS .
SEND IT BACK AS DEFECTIVE.
1/-2 ft lbs But 20 ft lbs is False Advertising .
Amc amx ask for forgiveness later or old school chevy truck with twins.
Just needs Turbos
Great investment with FJB going to ban gasoline right around the corner
Don’t be a Debbie downer
Sweet motor !!
Great investment with FJB going to ban gasoline right around the corner
Lol look at the cry baby
@@donaldkinder6716You forgot the word ‘’at me ‘’ !! If ya cant figure it out your probably a liberal …! … LETS GO BRANDON….! 😮🤢😷🤣
@@Naoj2024 lol FDT facing 91 felonyies Biggest crook ever been in the white house already convicted of sexual assault on a woman