Whirlpool Washer Will Not Go Into Rinse Cycle or Get Cold Water Diagnosis and Repair
HTML-код
- Опубликовано: 7 сен 2024
- Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Donations are appreciated you can donate here - www.paypal.me/...
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Here are the links for the parts
Water line screen filter-- amzn.to/2O1Wec9
-------------------------------------------------------------------------------------------------------------------------
My Camera Set Up/gear
Go Pro Hero 8--amzn.to/3lnXIcz
Go Pro Hero 8 w/Accessories - amzn.to/3eSLvdf
------------------------------------------------------------------------------------------------------------------------
Stop by our Amazon store to pick up must have tools for appliance repair
www.amazon.com/shop/beardedappliancerepair
-----------------------------------------------------------------------------------------------------------------------
Cusotmer complaint on this washer was that it would not go into the rinse cycle. Once the wash cycle ends the washer would just stop. These washers' use cold water on every rinse and they are smart enough to know there is a problem so this prevents any further damage to the machine. The cold water valve failed on this machine and needed to be replaced. We replace it and show you how to test these valves on this thing. Good luck!
![Run Away - Tzuyu(TWICE) ツウィ 쯔위 [Music Bank] | KBS WORLD TV 240906](http://i.ytimg.com/vi/KnHNNyAYiu0/mqdefault.jpg)
Excellent video! I'm a single mom and was able to save the money of a service call by following your instructions. Thank you so much!!
Thank you SO much for this easy to follow video. I didn’t have extra money to call someone or buy a new washer so close to Christmas, so I followed this video and it worked! SO happy to be back in business.
Thanks Bearded Appliance Repair you just saved me a service call for a blocked water line. Kudos to you!!
Left, right, right, right, left, right
Turn 2 or 3 times
Aye bro thanks I just got done watching your video I order my piece and fixed it today it’s working great now very helpful
Great video, it showed me exactly what to do step by step
You’re brave for working on it with it still plugged into the wall
Thanks. I have an Oder washer that’s not getting cold water, so I think you just solved my problem.
We have a new Whirlpool WTW4816FW3 model and it’s the worst washer we’ve ever had. It takes FOREVER to rinse, and now it won’t go into the rinse cycle. And it leaves soap stains on your black clothes after TWO RINSES!!! This model has too many “technological” features and I just want something basic and reliable now.
I have this exact washer. The rinse cycles are out to lunch.. I also can’t get it to go into manual test on my dial…. How do you do it? I’m very mechanically inclined and plan on ripping it apart
HI there, have exact problems in whirpool machine, cold/hot water valve is working good....next step ? any idea?door lock is working also..thanks for share..
The washer needs some washing.
Also-you should leave the lid open all the time after using the machine so it will not rust. Let it dry out.
Having the same issue this washer is less than 6 months old
Just bought a brand new one just like this and installed today. It won’t go past the washing cycle. I have to manually switch to each cycle to wash. To see that this is a major flaw in this model and Im having this issue same day it was delivered, I’ll be pushing for a store return and buy a different brand.
Mine is a week old and it's the same way. My last one was an amana made by same company and I Had to use only hot water for it to work.
How do you manually switch it?
@@missicook5601did you ever figure out how to get the cold water working?
@@yaredgiamporcaro6100did you ever figure out how to get the cold water working?
Same thing happen to me
Thanks for the video and would help what happen if it doesn’t wash?
Tribles is the place for your parts commercial or residential. There’s most always a revision so the numbers may be a bit different dont worry. There’s nothing to appliances.
Quick question! Do you have to put it in diagnostics to do the repair?
Good golly!! Clean your washing machine out!
So I have no cold water, only hot. I replaced the part you did in this video but i still have no cold water, only hot. Is it the switch assembly where I switch the hot/hot, hot/cold, etc.?
Just had a whirlpool washer delivered to my apt unit as a replacement.I can tell you from very frustrating experiences what a truly useless piece of shit that washer is.I'm starting to go back to the laundry mat to save me the headache of dealing with such a useless appliance until I can get a quality washer,such as a speed queen.Only ever had issues with the smart washers never the old school versions.I think it's a sensor issue.
Experience and patience!
Hi I love the video you're very thorough was wondering if you have a service manual for mvwc415ew 1
Thanks for the video. Would this be similar to the washer staying on Sensing for very long, filling with water slowly, and then never going into wash mode. It then starts draining while only in locked mode(only red lock light on). It then finishes, unlocks, ends everything with the wash light on. The clothes is somewhat wet and I washed.
Mine is doing the exact same issue. Did you get it fixed by chance?
Mine is doing this also!! Have you gotten an answer?
Me too! Lol
+1, I have exactly this problem
I had another washer doing same thing. Water coming in too slow so washer would drain. Was water inlet valve.
Amazing video. Thank you so much!
I've had this wash machine for 2 years. I have been disappointed since buying it.if everyone is having similar issue, why is there no recalls?
Recalls are only put out if there are any potential injuries from the problems. I remember getting an airbag recall a dozen years ago from a car we purchased(potential injury). Same with appliances.
Exactly 💯 everyone having issues should get their money back or a technician should come repair all the brand new machines in our houses. Install, uninstall, take back to store, reinstall only to have more issues is a joke and not funny at all.
Do these washers have a belt to spin the drum or does the drum spin with the agitator? I have very wet clothes after the wash cycle has complete.
This style washer is belt driven.
I have the same washer, would a tub bearing in the bottom cause it to not engage and not go into wash mode, HELP!!!!
hey any idea what to do about this??-
the one I'm working on keeps endlessly running water, gets about 4" of water during rinse and the water is constantly running while draining, staying at a little under 4 inches, if I cancel it and restart it only then it will drain/spin
(same exact washer)
I have the same washing machine from the video
Thank you so much this really helped
Did I miss the part where you attempted to clean the little $5 replaceable inlet screen first?
very nice video very helpful
I have cold water, stops during spin cycle. Any ideas?
Great video! My daughter has the same issue, after the wash and spin it stops. We have to manually put in on rinse and spin and it does those cycles. Could it still be the valve?
Dealing with the same thing, did you end up fixing it?
So most likely your clothes is already in the washing machine, would you have to do for this to work is hold down the power button for 10 seconds, allowing the machine to drain and then go into neutral mode so that you can do this process
I was so frustrated, you’re welcome
Thank you so much!!!!
Can you do a video on diagnostic mode only. It was blazing fast, lights blinking and your turning the dial before I blink. Couch potato 101 for me
I do need to. I'll have to remember doing one the next time i see one of these. If I have the time and the customer will allow it I will get it out there for you'll.
User u could adjust the speed of the video to slow it down or pause replay
It’s on 3 dots to right of video choose play back speed
Puede hacer un vídeo en español
@@BeardedApplianceRepair hi my whirlpool washer is stuck on wash an iv done everything on all the videos an it won't work it just fills with alittle water an washes alittle an then kicks back off an still stuck on wash water won't drain out or spin
I did the diagnostic, both cold and hot water are working. But washer still won't go past rinse. Anything else it could be??
Hello, my unit is currently doing a similar thing as yours, were you able to get a fix?
How much is that water valve and where can I get on my washer is just like this one in video same washer
I have that exact problem. Called a technician charged $75 didn't fix shit.
Why did you pay then?
The problem with my washing machine is that it only shoots out hot water and then it shuts off so how do I fix it and how can I calibrate it ?
Thanks this was a great video it save me a whole lot of money
I’m getting water to the tub but the washer is just stuck and not doing anything with the tub full
i have had a tech come twice, and mine is still acting crazy
only way i can wash is to stay in my basement and when it starts making a certain buzz noise i turn water valves off and back on again..tech is coming back this week. 🤷♀️
Anybody got a link or part number for that valve? Want to make sure I grab the right one
Here after trying to self diagnose something without knowing what I am doing now that I bought a new drive belt motor. 😭
Great vids thank you!
My pleasure!
Mine is getting cold water in the beginning but it still gets stuck on the rinse cycle
Mine does the same thing. Same Whirlpool. Changed the control card, checked the water valves and solenoids (both work OK, not plugged or burned), calibrates OK, diagnostics pass except the cold water test. Could it be that the wash temp switch, the lid lock and/or the thermistor is at fault?
Hi did you solved it ?
@@Jperales96 No, still have the same problem. Thanks for asking.
@@anibal2476 Did you figure out the issue?
@@christov4120 I ended up scrapping it and bought a new GE. I still wonder why it did this on the first place, but it is all in the past now. Thanks for asking.
@anibal2476 Can't blame you on that, I'm dealing with the same circumstances you were describing. If I get lucky on the fix I'll let you know.
I may have already asked this. If so, excuse me.
I
Roper RTW4516FW1
Does fine except when in Rinse cycle.
Shouldn’t it fill in Rinse?
Look in the use and care manual. Some washers do not fill in the rinse cycle. Make sure you have extra rinse selected on some models for a traditional rinse. Your use and care guide should have this info in it to make sure you have it on the right settings.
I have hot and cold water when I put mine into diagnostic and the green light is above rinse all 5 green lights flash
My washer stop at rinse and I need help please
I have a Whirlpool washer and when washer is in rise mode it just continues to fill with water. How can I fix it?
How in the world do these machines get so dirty on the outside???
Depends where they are. This one was in a laundry room on the carport. It gets humid in the summer and critters are running around I am sure. Touching it with dirty hand will get it dirty as well.
I need that exact valve is there anyway you can send me that part number for that valve for the same washer
Description 😁
The part you replaced is not listed in Description. The only part listed is screen filters.
I’m looking for the valve to…hopefully I can find the part number in these comments.
@@SarahJane12146:25
What if it's not the water flow?
But what if my washer fills in cold temp mode
Is the water cold or hot when you run it? If it is hot water than your cold water is not working.
These washers are too smart for their own good. Even when set to cold it will put hot water in it to satisfy the temp sensor. Not sure of the exact temp it want but say it wants 60 degree water coming it. If the cold is 50 degrees it will put it hot water to warm it up. So these washers now-a-days run both during the fill. For rinses it’s different. All rinses are cold water only. If it fills on rinse than I would say your cold water is not the issue.
@@BeardedApplianceRepair no it was cold. I eventually calibrated it and it seems to work fine. I noticed this problem after i washed some heavy blankets. Machine would not advance to rinse and the load really wet. I had to select drain and spin it out
Sounds like an out of balance thing then. That happens pretty easily with large materials like blankets. When that happens just empty it and try to rebalance the big blanket. Calibrating was a good idea as well. That’s supposed to help with keeping it balance as well.
They make washers junk nowadays. Grew up with washers that lasted 20 yrs. Last cheap off brand I bought lasted 20 yrs with no issues. My Whirlpoor like this one is just 3 yrs old & I'm getting rid of it. I only do one load a week, too.
I have exact washer, only difference is my wash cycle won't agitate.... been scrolling videos trying to figure it out.
Can you describe in detail ? Won't agitate ? What happens when you start the cycle, does it go into sensing, water, sensing ? and then stop ? At least in whirlpool and possibly other models, the sense mode uses the drum, once sensing is complete, it then "shifts" to agitation - it sounds to me like a shift actuator problem, that it is unable to switch to agitator mode. You would be able to know by going into diagnostic mode, manual mode and testing both agitation and spin modes, this will trigger the actuator shift motor, and you'll be able to know.
Mine senses and fills with water, then does not agitate. Then when it reaches rinse cycle (after it drained from wash cycle) it stops and does not fill back up for rinse cycle. The rinse light then flashes and lid unlocks. What could it be? Washer is only a year old
Slower PLEASE
Do u have the part number for the water valve?? Please thanks
Did you ever get or find part number?
This is a horrible washer. I regret buying it and would send it back if it were not such a hassle. Should have kept the old sears unit. :(
Cold water won’t come out of mine and won’t hum when I shut water off and turn on cycle, only the hot water will him
Mine is doing the same thing! Did you ever get if fixed??? If so how???
Following this is so stressful
My washer fills water and then the led moves to wash led but nothing happens.
Hold the power button ten seconds
The only way to find out is go into diagnostic mode and testing items, you would need a service manual though. My initial guess would be a faulty shift actuator - once a washer finishes "sensing", it will move the shift actuator to the "agitator" position. If it cannot do that, your machine won't agitate.
the valve with the screen is a big scam on design go back to the old fashion way and this crap would not happen
but it fills cold for wash for cold wash............but buzz n no water in rinse.......turned off value no water so yes water hooked right....all clean as new(screens)...........one video said extra rinse switch but then it went to different subject. So started new load , left came back to check...the damn thing was almost full of water running in as agitating....first time for this!!! These thongs are possessed
Wasn't helpful to the issue I was having.
I just replaced my inlet valve and the unit still won't rines. Ideas?
Did you get it working?
@@christov4120 I replaced the actuator and that got it running!!! Good luck!