Nice guide kumpleto maaus..👍 Anong size po nung fans na gnamit mo po? Ok lang ba na 6fans tpos rekta USB port prn ng laptop??? 🤔 And if po, Ok lng ba rekta sa saksakan, hnd na isasalpak sa laptop? Hnd po na sasabog ung 3fans lng? Or 6fans?.... 🤣🤣(hahahaha natawa q lumipad sa huli) 😂😂
Oks lang yan pareho idol. Mas malakas lang talaga pagg rekta sa saksakan pero di advisable, unless merong voltage regulator. Also, kahit 3 fans lang sulit na sulit na. Even USB lang gamit. Enough power naman sya. Thanks for watching! 😅
I think double tape yung makapal is maganda na gamitin pag sa pagdikit ng fans para incase isang fan nasira pwede sya mapalitan. Pero ask ko na din pwede din naman sya na anim na fan? love your videos!
DC din naman ang battery ng laptop paps so no problem tayo dyan. Plus, low voltage lang din naman yung fan. Mas magkakaproblema tayo kung sa outlet natin irerekta dahil AC ang mga household outlet. Impractical naman if gagamit pa ng inverter para lang sa cooler. Hehe.
Hello siir. I made a diy laptop cooler, but looks like it makes my laptop sweaty and i think its bad for parts inside? i think i usetoo much power of fan haha, or is it much better? hahaha im confuse, cause my laptops thermals better after long use now, but its just that sweaty feel when i touch under my laptop. btw i use a 50hz ac fan. Is it okay?
Ask ko lang po, pwede ba 6fans gamitin? Pwede din ba instead na sa laptop mo isaksak eh sa charger adapter nalang para direct sa outlet? Pasagot po. Thanks!
Hi paps! Regardless po kung anong fan, gagana naman sya. Wag lang electric fan kasi masyadong malaki at kukulangin sa power if USB lang hahaha. joke lang po.
Greeeat content! I don't have any idea of what language you are speaking, but I could understand almost everything, even the drone joke at the end 😂. Thanks for sharing it
Hello Po kuya tanong ko lang, hindi ba mababawasan yong voltage kapag ganyang wiring setup? I mean will the last fan still get the voltage it needed to optimally function same as the other fans?🤔
Good Day sir, nagmodify ako ng laptop cooler from 5v na fan pinalitan ko ng 12v, tanong ko lang kung anong tamang position nung fan? pabuga yung hangin or pahigop?
From the time na ginagawa namin 'to, nanotice namin na some coolers, pabuga ang hangin. Some naman is pahigop. Pero upon testing, napansin naming mas nagc-cool down ang laptop kapag pabuga ang hangin. So yun ang marerecommend namin sir :)
di po ba mahina lang yung power nung fans kasi 5v lang yung usb and tatlong 12v na fans yung pinopower nya? malaki po ba yung difference sa lakas? di niyo po kasi pinakita sa mismong video hehe
bali hindi po gagana ng normal speed ang fans dahil sa boltahe at current na kailangan nito? kung sakali pong gusto ko mag 12 volts ano po kaya ang murang choice na power source may mairerecommend po ba kayo?
Question po. Di ba 5v lang yung output ng usb port ng laptop? Di kaya mabilis masira yung fans dahil 12v yung required input nya? Thank you sa idea ng diy laptop cooler
Hi idol Emman! Di naman sya masisira kasi rated voltage requirement nung fans is 12V. So kung 5V lang magiging input nun sa fans, it means kayang kaya nyang isustain. Di naman masisira yung mga fans kahit lower voltage input lang pumapasok sakanila. It’s a different story kapag higher voltage and input. Hehe
Yes pwede rin naman pong wala. Make sure lang po na secure yung pagkaka dikit nyo sa wires para di madaling matanggal. Though highly recommended talaga na may panghinang :D
Eto yung breakdown ng nagastos namin idol. Yung fans, at mga pandikit lang ginastuhan namin for this project. Prices are as follows: Fans - 150 php (50each) Super Glue - 8 php Pvc cement paste - 40 php Cable tie - 25 php Spray paint - 95 php 318 php in total hehe. Eto namang mga ‘to, free lang na nahanap namin sa bahay: Pvc pipes Screws Usb wire Tools (drill, screw driver, solder) Yan lang lahat idol! Sana makatulong hehe.
Eto yung breakdown ng nagastos namin idol. Yung fans, at mga pandikit lang ginastuhan namin for this project. Prices are as follows: Fans - 150 php (50each) Super Glue - 8 php Pvc cement paste - 40 php Cable tie - 25 php Spray paint - 95 php 318 php in total hehe. Eto namang mga ‘to, free lang na nahanap namin sa bahay: Pvc pipes Screws Usb wire Tools (drill, screw driver, solder) Yan lang lahat idol! Sana makatulong hehe.
Gagawa ako nito at nakabili ako ng mga gagamitin kaso parang mali ata boss nasabi mo sukat dun sa tee's at elbow yung una 1inch tapos nung pinag kakabit mo na 1/2 inch na lang yung sukat Goods nman. Pinapalitan ko lang yung nabili ko.
Bali nung ginawa namin yan sir, eto lang nagastos namin: Fans - 150 php (50each) Super Glue - 8 php Pvc cement paste - 40 php Cable tie - 25 php Spray paint - 95 php Total - 318 php Yung iba kasi like yung PVC pipes, tira-tira lang sya sa bahay hehe.
Hi idol! Yung fans, at mga pandikit lang ginastuhan namin for this project. Prices are as follows: Fans - 150 php (50each) Super Glue - 8 php Pvc cement paste - 40 php Cable tie - 25 php Spray paint - 95 php 318 php in total hehe. Eto namang mga ‘to, free lang na nahanap namin sa bahay: Pvc pipes Screws Usb wire Tools (drill, screw driver, solder) Yan lang lahat idol! Sana makatulong hehe.
sobrang dali naman ! salamat sa diy tips! ngayon napagpasyahan ko na umorder sa shopee ng laptop cooling pad
Instant subscriber mo na ako. I love the content no BS fillers, informative and humourous when necessary
Salamat po sa motivation paps
Thumbnail is like, you are making a rocket...😂 It's just a child thing. To make a cooler.
Thank you engineer.. balak ko pa naman bumili ng cooler para sa laptop ko.. yan na lang gagawin ko .
😅👍
Sir nagawa mo naba? And goods naba?
Solid content amd editing...ganito yung mga deserve ng million subs
Last moment of the video really 😀😀
Nice guide kumpleto maaus..👍
Anong size po nung fans na gnamit mo po? Ok lang ba na 6fans tpos rekta USB port prn ng laptop??? 🤔
And if po, Ok lng ba rekta sa saksakan, hnd na isasalpak sa laptop? Hnd po na sasabog ung 3fans lng? Or 6fans?....
🤣🤣(hahahaha natawa q lumipad sa huli) 😂😂
Oks lang yan pareho idol. Mas malakas lang talaga pagg rekta sa saksakan pero di advisable, unless merong voltage regulator.
Also, kahit 3 fans lang sulit na sulit na. Even USB lang gamit. Enough power naman sya.
Thanks for watching! 😅
I think double tape yung makapal is maganda na gamitin pag sa pagdikit ng fans para incase isang fan nasira pwede sya mapalitan. Pero ask ko na din pwede din naman sya na anim na fan? love your videos!
Thank you po sa suggestion! We'll try that next time. Also, pwedeng pwede po na 6 fans ang gamitin :)
Walang kupas pagka-kuwela nyo @Renz & @Robien hahahahaha
Haha thank you sir! Nadala namin yung kalokohan natin nung highschool eh hahaha
@@renzal2229 Keep it up! haha
since dc yung fan and 12 volts, hindi po ba siya makakaapekto sa battery ng laptop?? or pede po ba another way na irerekta siya sa outlet?
DC din naman ang battery ng laptop paps so no problem tayo dyan. Plus, low voltage lang din naman yung fan. Mas magkakaproblema tayo kung sa outlet natin irerekta dahil AC ang mga household outlet. Impractical naman if gagamit pa ng inverter para lang sa cooler. Hehe.
thank you sa information paps
@@ste8194 tama sya sir , go mo lang
@Ste tama naman sinabi ni sir, ayos tayo buddy
Pwede ko po kaya gamitin na fan is ung Aigo Fan AR12 Aura Sync fan 120mm 5v 3pin RGB fan with remote PC Cooling Cooler 3in1 a kit? Thank you po!!
Pwede ba i derekta sa outlet with using cellphone charger adaptor?
reach ba nya maximum RPM sir? 5v lang po ang USB diba? or need gumamit ng Mt3608 DC-DC adjustable booster?
Hello siir. I made a diy laptop cooler, but looks like it makes my laptop sweaty and i think its bad for parts inside? i think i usetoo much power of fan haha, or is it much better? hahaha im confuse, cause my laptops thermals better after long use now, but its just that sweaty feel when i touch under my laptop. btw i use a 50hz ac fan. Is it okay?
Ask ko lang po, pwede ba 6fans gamitin? Pwede din ba instead na sa laptop mo isaksak eh sa charger adapter nalang para direct sa outlet? Pasagot po. Thanks!
question po, anong volts po ng fans? pano po napagana ung fans using 5v USB and 5v ports, wala po aqng nakitang step up booster.
Hi! Ask ko lang if possible kabitan ng speed controller para may option kung gano kalakas yung output
Idol ko mga actors 😂 Pero syempre iba padin yung editor 🖤. Good job guys!
Bakit black yung heart?
E kasi common na yung red hahaha 💛
Pvc cap on leg, long bolt for adjustable leg would of been cool too. Good build.
Super Underrated!
Thank you po :D
Ganda ng content. Napa subscribed ako galing.
Pwede ba yan sa 120mm fan? Para mas malakas yung buga
Hello po, okay po ba i direct yung fan sa outlet?
Hinde ba hihina yung fans kasi nagaawan sila ng power sa iisang usb?
Hindi po ba underpowered Yung fans? Kasi 12V po ung fans eh 5V Lang po Kaya ma output Ng USB port. Asking Lang po hehe balak ren Kasi gumawa
Hindi naman po. Pero you can also connect it directly sa outlet as long as merong voltage regulator. Hehe.
With pleasing personality 😆 haha pawer
Thanks Joms!power hehe
Jooooms 😂😂
Hello po, nagmamatter po ba if brushed or brushless fans ang gagamitin?
Hi paps! Regardless po kung anong fan, gagana naman sya. Wag lang electric fan kasi masyadong malaki at kukulangin sa power if USB lang hahaha. joke lang po.
Greeeat content! I don't have any idea of what language you are speaking, but I could understand almost everything, even the drone joke at the end 😂. Thanks for sharing it
Hello Po kuya tanong ko lang, hindi ba mababawasan yong voltage kapag ganyang wiring setup? I mean will the last fan still get the voltage it needed to optimally function same as the other fans?🤔
Same lang po sya sa lahat dahil A/C naman po sya.
thanks for sharing your idea. nice jokes din. natawa ako dun sa drone effect 😅
Good Day sir, nagmodify ako ng laptop cooler from 5v na fan pinalitan ko ng 12v, tanong ko lang kung anong tamang position nung fan? pabuga yung hangin or pahigop?
From the time na ginagawa namin 'to, nanotice namin na some coolers, pabuga ang hangin. Some naman is pahigop. Pero upon testing, napansin naming mas nagc-cool down ang laptop kapag pabuga ang hangin. So yun ang marerecommend namin sir :)
@@WeekendForumOfficial yun salamat sir, balak ko kase eh pahigop 😅 more power sayo sir and stay safe.
@@evbwe8891 Salamat din po! Good luck sir :D
@@WeekendForumOfficial ito na sir hehe medyo epic yung paa haha i.imgur.com/2vkDOtu.jpg
di po ba mahina lang yung power nung fans kasi 5v lang yung usb and tatlong 12v na fans yung pinopower nya? malaki po ba yung difference sa lakas? di niyo po kasi pinakita sa mismong video hehe
Mejo mahina po sya compared kapag direct sya sa outlet. Pero enough naman na po sya to cool down the laptop :)
bali hindi po gagana ng normal speed ang fans dahil sa boltahe at current na kailangan nito? kung sakali pong gusto ko mag 12 volts ano po kaya ang murang choice na power source may mairerecommend po ba kayo?
Also, kelangan 12v yung laptop charger bago mag test, kung 12v yung Fan.
Question po.
Di ba 5v lang yung output ng usb port ng laptop?
Di kaya mabilis masira yung fans dahil 12v yung required input nya? Thank you sa idea ng diy laptop cooler
Hi idol Emman! Di naman sya masisira kasi rated voltage requirement nung fans is 12V. So kung 5V lang magiging input nun sa fans, it means kayang kaya nyang isustain. Di naman masisira yung mga fans kahit lower voltage input lang pumapasok sakanila. It’s a different story kapag higher voltage and input. Hehe
@@WeekendForumOfficial salamat at nalinawan ako. Di ko na pala need bumili nung volt changer device. Pwede pala rekta USB cable. Thanks a lot.
Glad to help idol! Good luck sa project mo 😁
nakaktuwa video nyo boss auto subscribe agad hahah
Napakalupit naman ng kaibigan kong si jm hahaha
Thank you pre😁pero mas malupit ka pre hehe
ito po ba ung idea sa tornado colling pad?
pwede po ba na 12 volts na adaptor gamitin sa fans instead na dun lang sa usb ng laptop isaksak? nagpaplano din po kasi gumawa thanks :)))))
upppp
Nice content lods. Pero sana pa lagay ng pina ka importante which is effectiveness. Temperature differences with and without the cooler.
Good suggestion lods! Next project, isasama natin yang pagtetest. Salamat sa panunuod and recommendation 😄
Hello po what power supply should I get? I have po a 3x 3600rpm fan 80mm and a led strip po 12v 3a po ba?
Sir san mo po nabili yung 3600 rpm fan?
ganda ng idea, pero yung pagkakadikit ng fans at naipit yung isang wire, mejo sumakit un utak ko haha
Lupit mo sir! Subscribed!
Pno po pag 6 fans yung gusto ko ? Same process lang no ?
Same process lang sir. magiiba lang po yung sukat ng frame hehe.
1 week na editing ata to tsaka planning tong video nato, ganda haha, btw content is good also
400 SUBS! ROAD TO 1K SUBSCRIBERS!
UNDERRATEEEEEED! GRABEEEEEEE SOLIIIID!
Thank you siiir!
Lupeeeet lods!
ilan rpm nyan sir?
Haha nice one bro!!
Thanks brooo
hi sir, kaya po ba yan ng 3600rpm ? please sana mapansin
how much po nagastos lahat?
Ask ko lang sir ilan po rpm ng ganyangvfan?
Wala pong nakalagay sa description ng product eh. So honestly not sure po :(
Sir pareho pong black Yung wires pano po yon.
Kailan po kayo ulit maglalabas ng new video? :)
Ano pwedeng gawin kapag walang panghinang?
Yes pwede rin naman pong wala. Make sure lang po na secure yung pagkaka dikit nyo sa wires para di madaling matanggal. Though highly recommended talaga na may panghinang :D
pede po matanong total na gastos
Eto yung breakdown ng nagastos namin idol. Yung fans, at mga pandikit lang ginastuhan namin for this project. Prices are as follows:
Fans - 150 php (50each)
Super Glue - 8 php
Pvc cement paste - 40 php
Cable tie - 25 php
Spray paint - 95 php
318 php in total hehe.
Eto namang mga ‘to, free lang na nahanap namin sa bahay:
Pvc pipes
Screws
Usb wire
Tools (drill, screw driver, solder)
Yan lang lahat idol! Sana makatulong hehe.
SALAMAT LODS GOD BLESS YOU 💯💚
magkano nagastos lahat boss?
Eto yung breakdown ng nagastos namin idol. Yung fans, at mga pandikit lang ginastuhan namin for this project. Prices are as follows:
Fans - 150 php (50each)
Super Glue - 8 php
Pvc cement paste - 40 php
Cable tie - 25 php
Spray paint - 95 php
318 php in total hehe.
Eto namang mga ‘to, free lang na nahanap namin sa bahay:
Pvc pipes
Screws
Usb wire
Tools (drill, screw driver, solder)
Yan lang lahat idol! Sana makatulong hehe.
Gagawa ako nito at nakabili ako ng mga gagamitin kaso parang mali ata boss nasabi mo sukat dun sa tee's at elbow yung una 1inch tapos nung pinag kakabit mo na 1/2 inch na lang yung sukat Goods nman. Pinapalitan ko lang yung nabili ko.
Mag kano lahat na gastos mo sir
Bali nung ginawa namin yan sir, eto lang nagastos namin:
Fans - 150 php (50each)
Super Glue - 8 php
Pvc cement paste - 40 php
Cable tie - 25 php
Spray paint - 95 php
Total - 318 php
Yung iba kasi like yung PVC pipes, tira-tira lang sya sa bahay hehe.
@@WeekendForumOfficial Thank you sir☺️
@@joshuabuenviaje9158 thank you din sir!
nc vid bro!!
Thank you paps!
idol bka pde pacomment ng quotation ng mga presyo or nagastos mo sa bawat item heheheh salamat idol
Hi idol! Yung fans, at mga pandikit lang ginastuhan namin for this project. Prices are as follows:
Fans - 150 php (50each)
Super Glue - 8 php
Pvc cement paste - 40 php
Cable tie - 25 php
Spray paint - 95 php
318 php in total hehe.
Eto namang mga ‘to, free lang na nahanap namin sa bahay:
Pvc pipes
Screws
Usb wire
Tools (drill, screw driver, solder)
Yan lang lahat idol! Sana makatulong hehe.
@@WeekendForumOfficial thank you so much idol more vlogs to come :)
subscribed
di namin nakita kung umikot ung mga fan Hahahah
Diy Drone
Gostei do efeitos. Fiquem com Deus.
nnice
more like an engineer copying a content that was posted 2 years ago
acting pa RJ😂
USELESSSSSSSS