Fitting Hobbywing Max 6 G2 into a Traxxas X-Maxx with standard motor. What can go wrong?

Поделиться
HTML-код
  • Опубликовано: 1 фев 2024
  • We fitted a Hobbywing Max 6 G2 but kept the standard motor - what can wrong when we put 260+ amps through it!!!
    For all your custom 3D printed items find us below
    / customrc3dprints
    We have now added the front dirt deflectors and there is no issues with heat build up
    Available on eBay or contact us on Facebook
    www.ebay.co.uk/itm/325667233124
    Wishbone protectors, dirt deflectors and bodyshell savers available for X-Maxx XRT and Maxx
    They are flexible and simply mount with cable ties - no need to drill.
    They are available on ebay or drop us a message on Facebook
    Wishbone Protectors - www.ebay.co.uk/itm/325667215938
    Workstand - www.ebay.co.uk/itm/325485848447
    Dust Protectors - www.ebay.co.uk/itm/325667233124
    Wing Mount - www.ebay.co.uk/itm/325562989693
    Available to ship worldwide
    Find our facebook page to order or leave a message for all your 3d printed needs
    / customrc3dprints
    #TraxxasXmaxx #TraxxasSledge #OffRoadRC #TraxxasXRT
    #TraxxasXmaxx #TraxxasSledge #OffRoadRC #traxxasudr
  • Авто/МотоАвто/Мото

Комментарии • 20

  • @DownShiftDrew
    @DownShiftDrew 5 месяцев назад +1

    Just found your channel through older videos you posted on fixing your UDR. You helped me out soooo much, I was actually able to fix my drive shaft, rear end, and out put shaft to my transmission.
    HAPPY NEW SUBSCRIBER RIGHT HERE MAN!!!🙋🏻‍♂️👍🏼

    • @TeamRC3D
      @TeamRC3D  5 месяцев назад

      Glad to hear it has helped

  • @AdvanceDrivingSchool
    @AdvanceDrivingSchool 5 месяцев назад +1

    A decent upgrade from the stock ESC 👍🏼

    • @TeamRC3D
      @TeamRC3D  5 месяцев назад

      Yep

    • @SnoriRC
      @SnoriRC 5 месяцев назад +1

      @@TeamRC3DWorks ok with stock motor? What gearing did you use? Great video 👍

    • @TeamRC3D
      @TeamRC3D  5 месяцев назад +3

      Yes, it ran fine with the stock motor - running stock 18/46 gearing.

  • @WIPEYOURLENZ
    @WIPEYOURLENZ 4 месяца назад +2

    Where do you put the sensor cable that comes out the MAX6 G2. Does it just need blanking off and tucked away.

  • @thierryc.8360
    @thierryc.8360 5 месяцев назад +1

    Salut X-Max 👍France 🇨🇵

  • @TheCynabal
    @TheCynabal 3 месяца назад

    do you use stock diff oil in your xmaxx's?

    • @TeamRC3D
      @TeamRC3D  3 месяца назад +1

      Yes most of the time

  • @DigiDarkness
    @DigiDarkness 5 месяцев назад

    What gearing was in this combo?

    • @TeamRC3D
      @TeamRC3D  5 месяцев назад +1

      Stock 18/46 gearing 👍🏼

    • @DigiDarkness
      @DigiDarkness 5 месяцев назад +1

      @@TeamRC3D would 20/50 work well with the max6 and stock motor?

    • @AdvanceDrivingSchool
      @AdvanceDrivingSchool 3 месяца назад +1

      Yes, that’s almost the same ratio. 👍🏼

  • @gonzodetroitify
    @gonzodetroitify 16 часов назад

    An absolute blinding show here
    I think the blue truck has more supple suspension set up that red looks like it wants an actual track 🤣🤣
    Do you still use the max6 g2 and has the stock motor held up
    What lipos were you using here thanks guys🔥🙏🏿

    • @TeamRC3D
      @TeamRC3D  8 часов назад +1

      Thanks. We are still using the Max6 in the blue truck - but have now upgraded the motor to the Hobbywing 5690 1250kv. There was nothing wrong with the stock motor, but we just wanted more power! Both trucks are running cheapo HRB 6000 packs from Amazon.

  • @bonniebonnie4499
    @bonniebonnie4499 5 месяцев назад

    X Maxx go wrong can't bluetooth link If race have to pair . Button setup less up😃

    • @TeamRC3D
      @TeamRC3D  5 месяцев назад

      Switch between the two?

    • @dtrain3219
      @dtrain3219 5 месяцев назад +4

      Wtf is he saying !