Want one . Stunt trucks are the most fun for me . G2 max6 coming tomorrow though for the k6s . The stock esc is fine . I fried one . I’m thinking the motor might/will stay cooler hopefully , 🤞. Had to order some 6” wires . I think this takes the 3” ones
thanks for this video! I bought the max6 g2 on the stock motor. But want to go for a hobbywing motor. debating on 1250kv or 1100kv g2. Which one would you go after your experience with the 1250? Would you do it the same again?
@NS-cd5yg . No complaints here with that 1250kv setup perfect. I would definitely do it again🦾.. went with that motor to try to keep everything looking stock didn’t want the ESC sitting to far foward and high 👊🏾💯
awesome video. i'm thinking of getting this combo also. will i need a new ESC mount or is it possible to fit it into the xmaxx in the normal spot for the ESC?
@liamquinlan9445 I used some of the Traxxas foam that come with the aluminum accessories to move it up in that spot. You would need a motor mount for the motor tho if you get the combo. Esc plate wouldn’t hurt if you don’t like to think to make it work for you. 👊🏾💯
@teeboy .Thanks for watching, got them off eBay www.ebay.com/itm/234828513108?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CYSQMZ1TSFC&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=www.ebay.com/itm/125755967886?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=j3IB6bVsR9m&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=COPY
Hey here I am again. Parts arrived this weekend and struggling to make it fit. My plan was to lift the ESC and went back to your video to see how you made it fit. I see you raised it as well? What did you use?
@NS-cd5yg . I use the extra battery foam protector that comes with the xmaxx . Had a couple of them laying around, then double sided tape it in place where the sensor wire wasn’t binding.
@Xbot4Life . Yeah punch 9 is the new 5. But you have to mess wit the initial throttle response too when you turn the punch up,It’s a lot more too it then the old max 6. I just left everything stock . If you turn the punch up make sure you have high C rated packs.👊🏾💯
how did you mount the esc? I just got this combo and while it fits some of the wires are rubbing against the motor and I am worried the motor gettting hot might damage them.
@danny1483 . All I can say is, it has better throttle response,smoother way more power curve and control. Not throwing shade but Stock esc is lacking tuning options. Plus the sensored set up has a better feel IMO. 👊🏾💯
@prestondillon9279 . That spur and pinion I got off eBay. www.ebay.com/itm/234828513108?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CYSQMZ1TSFC&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=COPY
I hate these hobbywing systems. They are slow unless you use boost and turbo, then they will melt your battery terminals. Hobbywing sucks, I feel sorry for anybody who buys this crap.
@ProperSkill . Sorry you’re having bad luck wit Hobbywing, i just run mine stock settings,only adjust bec voltage for my servo. Never had battery connectors melt. I guess when you max out everything and run weak batteries/connectors that’s what happens.👊🏾💯
hey my friend..long time...
perfect spot and air time mate..loking most fun spot and ramp😍💪
Want one . Stunt trucks are the most fun for me . G2 max6 coming tomorrow though for the k6s . The stock esc is fine . I fried one . I’m thinking the motor might/will stay cooler hopefully , 🤞. Had to order some 6” wires . I think this takes the 3” ones
@Hungrybird474 . Nice 👍🏾, love my max6 G2 glad Hobbywing went sensored and blue tooth with it.
thanks for this video! I bought the max6 g2 on the stock motor. But want to go for a hobbywing motor. debating on 1250kv or 1100kv g2. Which one would you go after your experience with the 1250? Would you do it the same again?
@NS-cd5yg . No complaints here with that 1250kv setup perfect. I would definitely do it again🦾.. went with that motor to try to keep everything looking stock didn’t want the ESC sitting to far foward and high 👊🏾💯
If you go 1100kv, get the Max5 or you will have heat issues.
Killer setup! Does the G2 fit in the stock location without any mods?
@Improvise_Adapt_0vercome . Thanks 🙏🏾
awesome video. i'm thinking of getting this combo also. will i need a new ESC mount or is it possible to fit it into the xmaxx in the normal spot for the ESC?
@liamquinlan9445 I used some of the Traxxas foam that come with the aluminum accessories to move it up in that spot. You would need a motor mount for the motor tho if you get the combo. Esc plate wouldn’t hurt if you don’t like to think to make it work for you. 👊🏾💯
@@LBizzyRC thank's man much appreciated.
Great vid, do you have a link to the pinion and spur that your using? Thanks
@teeboy .Thanks for watching, got them off eBay www.ebay.com/itm/234828513108?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CYSQMZ1TSFC&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=www.ebay.com/itm/125755967886?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=j3IB6bVsR9m&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=COPY
Hey here I am again. Parts arrived this weekend and struggling to make it fit. My plan was to lift the ESC and went back to your video to see how you made it fit. I see you raised it as well? What did you use?
@NS-cd5yg . I use the extra battery foam protector that comes with the xmaxx . Had a couple of them laying around, then double sided tape it in place where the sensor wire wasn’t binding.
@@LBizzyRC Thank you sir! Im actually surprised that holds up with all the bashing! Will look for a similar solution over here then!
Thats so sick you can see temps on the app.
@johnnymckissick2735 . Yes sir!!! Temp guns and burnt fingers is a thing in the past 😂😂😂🤣
@@LBizzyRCwhats the top speed with that set up?
@@johnnymckissick2735 I hit 60 mph probably could’ve got a lil more if I had more room
Hey Biz , what weight are you using in the front , center , rear differential center is probably still the 20mil ?
@normankeller1975 . Running 1mil in front / rear and 20mil in center 👊🏾💯
Thanks brother keep it going those vids!!
I just noticed it goes up to punch 9 instead of 5!!!
Is punch 9 the old punch 5? What did you go with?
Thanks 😊
@Xbot4Life . Yeah punch 9 is the new 5. But you have to mess wit the initial throttle response too when you turn the punch up,It’s a lot more too it then the old max 6. I just left everything stock . If you turn the punch up make sure you have high C rated packs.👊🏾💯
@@LBizzyRC 9000Mah 100c Zees 😎
Thanks dude 👍🏾
@@Xbot4Lifebash on bro👊🏾💯
Did you use the traxxas sensor wire with this set up?
@timbootz8894 . I took out the TQ running spektrum
@@LBizzyRC ok I might be doing the same if this sensor wire acts up on me.
how did you mount the esc? I just got this combo and while it fits some of the wires are rubbing against the motor and I am worried the motor gettting hot might damage them.
@Symbio7e I use some leftover battery foam spacers just to lift it up bit.
@@LBizzyRC interesting I never thought to do that. I'll be checking to see if this can work for me.
How is it compair to the original motor+esc? The same or more power?👋Danny from Germany
@danny1483 . All I can say is, it has better throttle response,smoother way more power curve and control. Not throwing shade but Stock esc is lacking tuning options. Plus the sensored set up has a better feel IMO. 👊🏾💯
Can you snip off the sensor cable from the ESC if you dont need it?
@Xbot4Life . I would just leave it on there for now and shrink wrap it, you might want to use it later if you decide to get the motor. 👊🏾💯
@@LBizzyRC True, thanks!
Bonjour es que c'est vraiment beaucoup plus puissant que l'origine ? 2x plus ?
Yes sir so much power🦾
What motor mount did you use?
@joshuahead2375 . That’s a PNWRcmadness motor mount.
No fan needed on the motor?
@Fishing_Obsession87 . It got a lil warm a fan wouldn’t hurt tho, but im not running one don’t really WOT all the.
What spur and pinion is this?
@prestondillon9279 . That spur and pinion I got off eBay. www.ebay.com/itm/234828513108?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CYSQMZ1TSFC&sssrc=4429486&ssuid=_qHN5f8oTRC&var=&widget_ver=artemis&media=COPY
How are the ring and pinion holding up with the extra power ?
@user-xq5tb4vf3b . Everything sounds/feels real smooth no problems at all👊🏾💯
450 Amps and XT90 😲🤣
I hate these hobbywing systems. They are slow unless you use boost and turbo, then they will melt your battery terminals. Hobbywing sucks, I feel sorry for anybody who buys this crap.
@ProperSkill . Sorry you’re having bad luck wit Hobbywing, i just run mine stock settings,only adjust bec voltage for my servo. Never had battery connectors melt. I guess when you max out everything and run weak batteries/connectors that’s what happens.👊🏾💯
user error
L. Bizzy😏🫵🏿💯💥💥💥🤩🤩👊🏿👋🏿
Dis Ting👀 is VISCIOUS yo 🤤😁😁
He should have his own licence card L. Bizzy
Thanks🫵🏿 for sharing 🩸
@gonzodetroitify . Thanks for watching 🙏🏾 👊🏾💯
Hi, what motor mount did you use?
@Harvz78 that’s a PnwRCmadness motor mount
@LBizzyRC Thanks!👍