If this combo holds xrt with paddle tires on the back and heavy PL tires in the front it would defenetly hold just fine on stock kraton 1/5 exb? At the moment I'm looking for combo for my exb 1/5.
Great video as always, Joe. 🤩 But I’m curious, was this video just to show what the new hobby wing motor and ESC were capable of? Or was there something you weren’t happy with on the XRT stock setup? I have the orange XRT too. Had it a month now. And I find the stock goodies are way good enough to satisfy my casual hobbyist tastes 😂
Traxxas electronics leave a lot to be desired. Just replacing your stock esc with this on your stock motor would surprise you. Luckily for many the stock esc will let its smoke out and give them a reason to replace it with a good one. I would have used this in my most recent OC exb build instead of a max 5 of it'd been available a few months ago.
How about throwing that set up in the Udr with that vitavon Chassis it should fit no problem finally it would have the power everyone has been looking for. So how about it exo joe
Fits great in xrt I want to put it in the xmaxx like you did with the 5687 but don’t know how much modifying I’ll have to do and want to use the svt mount
If your mostly stock an not alot of heavy parts added to it it will be great and light weight compared to the max5 g2 esc an motor is alot less weight compared to the bigger 56118 g2 motors.
This is by far the most exciting video I've saw so far. I'm new to your channel and I am also new to the rc hobby. I just purchased a Traxxas xrt ultimate and although this is a fast car for me being that I'm a beginner, but I like fast cars and I'm looking to make this rc car even faster. Any suggestions as to what I need to do?
Do you happen to have a link to those 8mm bullets? The ones I put on my spektrum 5687/1100kv to use with my max5g2 are short, only inserted about 2/3's the way in the cups on the esc. Having a hard time finding longer ones. Any chance you can put the max6g2 esc next to the older max6 esc for a size comparison? I have 3 of the older ones on various trucks, but curious how it compares in size in case one of those gives out on me. Love your videos!
Hi Joe. i got an xmaxx with max5/1100kv set up and im considering trying the set up you have there, so i can get esc lower and get better (lower) COG, would it be a downgrade in power, the same or even a small upgrade? im currently driving 25/35 mod 1.5 gearing.
Will handle on losi dbxl e 2.0 with 56113 motor 800kv hw or 890kv SuprassRocket V2 motor?😂 but i want hw max5 g2 hv combo for dbxl but idea is possible because this esc is beast i think. And i like bt module inside:)
How would you compare the max 6 g2 to a mmx8s? I'm running a mmx8s hooked to the 5690 1250kv (sensored! Bought an adapter from China), it's great so far (I've only done short runs) but I'm always worried if the mmx8s can handle the 5690 and am tempted to just get a max 6 g2 if it can handle the power demand better
What gear ratio are you running?? I ordered the same combo for my Xmaxx with Vitavon 25/30. I haven’t t received yet so not sure how it will work with those gears
Wow 😮 that was crazy. The system it’s definitely worth trying out. Great video 💯
Waiting for mine in the mail already
That’s sick! I’ve thought about doing something similar with a Sledge. I feel like it would be a beast at the skatepark!
Great vedio, can you give details on how you mounted the motor in the XRT and where to get the parts?
That is down right friggin sweet. Love that it's bluetooth
Yeah no more dongle thing
Aaah, the XRT what a beautiful beast❤
I got the 1650kv 4990 ordered for my Mojave. 🎉
Je vais le commander pour mon sledge :)
Same! My Mojave deserves this combo.
Throws the xrt around as it was a 1/16 e revo Joe🤩😈
This combo is real strong
Man. Those rooster shots were awesome!!!!!
If this combo holds xrt with paddle tires on the back and heavy PL tires in the front it would defenetly hold just fine on stock kraton 1/5 exb?
At the moment I'm looking for combo for my exb 1/5.
Hey joe I got the max6 g2 on my stock motor scx6 running 8sand loving it it’s fast and still crawls slow 🔥🔥🔥😎👍
Waiting for one . The Bluetooth looked like a lot of choices I m not sure I d know what to pick 😂😊
Bluetooth is a huge benefit at that current selling point. A better set of Lipos would alleviate any additional punch...
Great video as always, Joe. 🤩 But I’m curious, was this video just to show what the new hobby wing motor and ESC were capable of? Or was there something you weren’t happy with on the XRT stock setup? I have the orange XRT too. Had it a month now. And I find the stock goodies are way good enough to satisfy my casual hobbyist tastes 😂
Traxxas electronics leave a lot to be desired. Just replacing your stock esc with this on your stock motor would surprise you. Luckily for many the stock esc will let its smoke out and give them a reason to replace it with a good one.
I would have used this in my most recent OC exb build instead of a max 5 of it'd been available a few months ago.
What motor mount and gear cover is that??
I was thinking of this system for my SCX6. What do you think? I really don't want to go Outrunner motor.
Do you still use this system in the xrt? Do you still feel it is adequate with those heavy tires?
That looks like a sensible motor size. What woulthe castle size equivalent be?
Castle doesn’t have a short can motor that I know of
I have the 1250KVG2 with a max5 on my XRT.Thing is crazy fast
I have the same set up on mine stays nice and cool too
@@martinbullla7654what gearing on your 1250 in XRT?
@@shawnscott9704 mod one gears 50 tooth spur 30 tooth pinion
@@shawnscott9704 I can get it to about 60 before it’s uncontrollable tires blown too much factory tires
What gearing are you using?
What's going on Sunday? You need to bring this out
How about throwing that set up in the Udr with that vitavon Chassis it should fit no problem finally it would have the power everyone has been looking for. So how about it exo joe
We have a winner 👍
I ordered this Combo for my x-maxx. How would you gear it? Thanks for your cool videos!
What gear setup did you end up going with?
@hydroboy35th still 24-52. Am happy with that.
is it bigger than a max6 ? if its same or smaller i need to get one for my rock lizard .
Fits great in xrt I want to put it in the xmaxx like you did with the 5687 but don’t know how much modifying I’ll have to do and want to use the svt mount
Man I can't wait for hobbywing to make an AXE outrunner edition, with Bluetooth and a sensored outrunner motor package deal.
You was running it on 8s right?
hi , i want to get the 1250kv combo for my kraton 8s , is there a big difference in power and speed between the Max 6 and the Max 5 esc?
I seen 3” wires for this . I think I need 6” for a k6s . Have you messed with the turbo thing ?
How would that system do in the armma 8s outcast
If your mostly stock an not alot of heavy parts added to it it will be great and light weight compared to the max5 g2 esc an motor is alot less weight compared to the bigger 56118 g2 motors.
What it was designed for
This is by far the most exciting video I've saw so far. I'm new to your channel and I am also new to the rc hobby. I just purchased a Traxxas xrt ultimate and although this is a fast car for me being that I'm a beginner, but I like fast cars and I'm looking to make this rc car even faster. Any suggestions as to what I need to do?
What motor mount are you using if you don’t mind me asking?
Great video! What oil are you running in all the diffs?
Joe do you think the v1 will still be available? I like g2 but it never outlast simpler proven designs
More technology sacrifices longevity .
Do you happen to have a link to those 8mm bullets? The ones I put on my spektrum 5687/1100kv to use with my max5g2 are short, only inserted about 2/3's the way in the cups on the esc. Having a hard time finding longer ones.
Any chance you can put the max6g2 esc next to the older max6 esc for a size comparison? I have 3 of the older ones on various trucks, but curious how it compares in size in case one of those gives out on me.
Love your videos!
What gearing did you use
Hey. What brand is the motor mount?
ESC and motor on Pre-Order for my Xmaxx, what would you recommend for gearing?
25/35 mod1.5
@@johnnymckissick2735 Been running 18/35 but will try 25/35, thanks!
Yeah… that roost is bad ass!!
Them paddle tires are dope 😂
What pinion gear?
Hi Joe. i got an xmaxx with max5/1100kv set up and im considering trying the set up you have there, so i can get esc lower and get better (lower) COG, would it be a downgrade in power, the same or even a small upgrade? im currently driving 25/35 mod 1.5 gearing.
Will it fit in an Xmaxx/Xrt's stock location without any modifications if I'm just running the stock motor?
Where can i get one. I gotta get max6 today? Nvm just pre ordered it
Still use it? I just installed it in my Xmaxx and can’t wait to try it out ✌️
Yeah. I don’t drive it every day but it’s there and ready.
what is the motor mount ?
Is it a 1250 KV or 1650 KV? Only see an option for a 4990 in 1650 kv...
Will handle on losi dbxl e 2.0 with 56113 motor 800kv hw or 890kv SuprassRocket V2 motor?😂 but i want hw max5 g2 hv combo for dbxl but idea is possible because this esc is beast i think. And i like bt module inside:)
How would you compare the max 6 g2 to a mmx8s? I'm running a mmx8s hooked to the 5690 1250kv (sensored! Bought an adapter from China), it's great so far (I've only done short runs) but I'm always worried if the mmx8s can handle the 5690 and am tempted to just get a max 6 g2 if it can handle the power demand better
Pretty sure the MMX8s can handle that motor.
What brand of motor mount you running ? Where can I buy it at ? May rip out the stock electronics in my xrt in the near future.
Vitavon and I have them at exocagedrc.com
Mod 1 gearing i assume?
Would have to be mod 1.5 as the 5690 has an 8mm shaft.
Yes he is using mod 1
Hey Joe what gearing are you using
Way too high. 26/46 in this.
I just ordered my 5690 1250kv and max6 g2 🤣 what gearing would you recommend? Thanks for the response Joe! Appreciate it
@@jaspersingson1922what gearing did you end up going with?? I have the same set up on the way for my xrt
Ok Exo Leggo 👍🏿
You think this would be a good system for a Arrrma Felony?
What gear ratio are you running?? I ordered the same combo for my Xmaxx with Vitavon 25/30. I haven’t t received yet so not sure how it will work with those gears
How did this turn out for you?
How did it turn out with those gears?
What gears did you use?
He said it in the video 26 46.
Tell lmt 와 비교시 어느rc가 더 재밌습니까?😊
Would that motor fit a UDR?
Not without some heavy modifications
Looked great
Make me want to try it on my LOSI 😂😂😂
How does it compare to hobby wing 1100kv the short one 56/86 I think
With same gearing
Hey my guy do you think the max 6 g2 will fit in Arrma talion6 exb with 1250kv because I seen nobody with Arrma Talion on you tube
not the best combo for that
I got the max 8g2 2250kv
Thx for 10% too
Would this esc work with a stock scx6 motor. In other words could I replace my stock scx6 esc with this ?
I’m sure it would run it. But not well as it has no actual crawl mode.
Have one in my X-Maxx, fits, 54-24. Crazy low temperatures. Has anybody a similar experience?
Whats the top speed on 24/54 and what brand spur/pinion do you use?
@@Xbot4Life gpm. Holding on so far! Have not measured to speed.
love it
Should have turned the turbo on!
IF u gotta remove the servo, replace it with anything. Stock suxxxx!🤪😁🤷♂️
Nice
EXO, how does this system do with the stock differential ring and pinion gears? Or Do you recommend upgrading to the vitavon helical gears? Thanks!
😁👍
👍👍😁😎✌️
🦾🦾🦾🦾🦾
What gearing are you using?