I ran a max5 esc in my scx6…smaller can tho…. Absolute beast on 6s ….never taxed the esc at all… I eventually took the max5 out and used a monster mamba X with a castle 1717 -1650kv…..just performed better all around on 6s …. Used the max5 for another project … I think the max5 is perfect for the 1/5 scale rigs…
Yeah its been amazing in the xmaxx, 10s and 12s is all I run it on. But its got upgraded hardened diffs and mod1.5 pinion/spur. If not itll blow the diffs and monster threw pinion/spur's. But with the upgrades its been bashed super duper hard for a long time and they have held up flawlessly.
12S in an X-MAXX? You'll put your eye out! 😂😂😂😂 8S is almost overkill on the X-MAXX since they are so light. I just put a fancy wrap on mine but haven't run it. So, I'm definitely not speaking from experience. I just subscribed to your channel.
Hi New sub here I just bought this whole system for my XMAXX I have 25/30 1.5 mod gearing and I burned up my first max 5 but the esc was used kinda smelled burnt out of the box and I paired it with a 5687 11kv HW motor got 3 runs out of it so I bought this same system how do you like it?
I have two of these g2 800kv 250amp systems, they are the best combos I've never had, I have beat the crap outta them both. To see a hobby wing go out is rare, I'd say it was a fluke.
I set to the default which is 3.3v per cell. Generally though I don't run batteries till I hit LVC. Personally I like to stop at 3.7 to 3.7v per cell so I can just toss them in a bag when I get home and store them without having to charge them to storage charge.
No sir apparently "yes question".... I've ran the snot out of this rig, even in the burning heat. Nothing heats up. All bullets, batteries, motor, esc perfectly fine!!! I assuming you dont hvae this motor or ESC. Well I have two of them and you are wrong, no QS8 needed.
I ran a max5 esc in my scx6…smaller can tho….
Absolute beast on 6s ….never taxed the esc at all…
I eventually took the max5 out and used a monster mamba X with a castle 1717 -1650kv…..just performed better all around on 6s ….
Used the max5 for another project …
I think the max5 is perfect for the 1/5 scale rigs…
Yeah its been amazing in the xmaxx, 10s and 12s is all I run it on. But its got upgraded hardened diffs and mod1.5 pinion/spur. If not itll blow the diffs and monster threw pinion/spur's. But with the upgrades its been bashed super duper hard for a long time and they have held up flawlessly.
12S in an X-MAXX? You'll put your eye out! 😂😂😂😂 8S is almost overkill on the X-MAXX since they are so light. I just put a fancy wrap on mine but haven't run it. So, I'm definitely not speaking from experience. I just subscribed to your channel.
Lmao, thanks dude!!
Hi New sub here I just bought this whole system for my XMAXX I have 25/30 1.5 mod gearing and I burned up my first max 5 but the esc was used kinda smelled burnt out of the box and I paired it with a 5687 11kv HW motor got 3 runs out of it so
I bought this same system how do you like it?
I have two of these g2 800kv 250amp systems, they are the best combos I've never had, I have beat the crap outta them both. To see a hobby wing go out is rare, I'd say it was a fluke.
Hallo
Ask one question what is Lipo Cut Off voltage what have you Lipo voltage after run?
High Level
Medium Level?
I set to the default which is 3.3v per cell. Generally though I don't run batteries till I hit LVC. Personally I like to stop at 3.7 to 3.7v per cell so I can just toss them in a bag when I get home and store them without having to charge them to storage charge.
Thanks very much.
Ask one question again how u know that cell have reach 3.7 voltage?
@@rockisback833 i have just gotten good at guessing when to stop. Usually like 10 minutes of bashing.
Thanks very much
Are you kidding me, you definitely need QS8 connectors!!! No question! And l1.5 gears!! 🤦🏻♂️🤦🏻♂️
No sir apparently "yes question".... I've ran the snot out of this rig, even in the burning heat. Nothing heats up. All bullets, batteries, motor, esc perfectly fine!!! I assuming you dont hvae this motor or ESC. Well I have two of them and you are wrong, no QS8 needed.
over spec