Swapping phase A with phase B re-orders the fluxes so that the flux rotates in the opposite direction. Swapping B with C does exactly the same thing as does swapping A with C. Think of it like a triangle with corners called A, B and C. If you swap any two corners and follow the points A, B and C you'll go in anopposite direction. Swap two more corners and you're back to the original rotation.
Sounds like your mesh is off, throw out the pins and set it manually. I learned that the hard way! Even with stock motors. This mount your using, looks like the adjustment is on the front of the motor mount. Sounds tight. FYI. Thanks, great video!
yes, from what I was told by the HW guys the next generation of ESC's for these motors will be able to use that port to keep things in check. I mentioned will it work with telemetry but didn't get an answer on that. With the big pinions the 30/35 I ran in this had no heat issues at all, maybe with extended runtimes bashing around may bring them up a bit or a 1-1 ratio.
Wow that was ripping good! Was curious about the HW 800kv. It doesn't seem to get used much. I may have to try it. I have the older 780kv 2028 castle and the 800kv. I honestly don't notice a difference other than the 800kv is 12s capable. Sweet Xmaxx guys! Love it!!
I love your video about motors and how they work my favorite one that you did was the 56113 very powerful but it looks to me you really like Hobby wing
That was cool he sounded like he was having so much fun just laughing away LMAO. I always like seeing your creations and I'll have to send one of my body's too you for an autograph. All right everyone have a great day and don't let off the throttle
Holy shit bro !!!.. best R / C power slide movie around a baseball diamond that I've ever seen. That is definitely a first. Kudos. Keep up the good work.P.S. watch out for those fences. Somebody keeps putting them in your way LOL
That turned the X-maxx into an even faster beast! Wow! Y'all need to run RC on a softball/baseball field where the infield is all clay. then you can drift in circles for days. :D (Voice of experience.)
I have a Rustler 2wd that I've heavily modded. The Gearbox, the drive shaft, the body widen slightly with Carbon Fiber plates to fit the Max 5 and I'm using a TP 4070cm 2200kv motor and I can't tell you how amazingly fast and powerful it is. I just can't find anywhere to run it. I can only run it max a 3rd throttle and then I have to break hard. The fastest I've gone is 81mph not because I can't go faster, definitely not but because the I just don't have much room to run it.
That’s a beast of a monster truck. I don’t own one but I have 9 other traxxas Rc vehicles and they are all phenomenal. My two mini e revos and my big 1.0 previous gen e Revo are my favorites. I also have slash’s, a bandit, rustlers, stampede 4x4 and that’s it. I was planning on getting a XO-1 also. I’m not sure though man.... I was eying the Xmaxx for a long time.
as much as i like power - i wouldn't put the max5 in my xmaxx, im kinda happy with the stock motor. Plenty of power for jumps and offroading. As the xmaxx has a high center of gravity, it wouldn't corner very well anyway. However, that esc and Motor is going into my Kraton 8s which i bought as a roller - figured the power trans fits much better with the Kraton Chassis :D
Im about to be trying out a 1750kv in the rustler 4x4 on 6s. Had a 3000kv in it on just 3s an nothing could keep up. Clocked it in at 80 on the sand with just rear paddles.
So I love the video...helped me alot...got the same set up....but what would happen if u ran a 25 or 28 pinion gear....35t on spur....would a lower pinion gear make the rc truck slower....more cooler and battery life..or play time
I am just wondering if the gears can handle this much power when you start bashing it hard. It also looked like there was more speed potential in it. Was it on full throttle or was the field too small for that? Great video.
I love these proline wheels...but they are 300grams heavier per wheel from what I know. Do you think its a problem when it comes to really hard bashing?
I didn’t even run my xmaxx once before switching to the max6. Sold the stock esc to get the max6. I am happy with it for now. Looking at hobbywings website the biggest motor that pairs with the max6 is the 4985. Isn’t that smaller then the stock one that I have already?
I've heard quite a few say the Hobbywing 1100 kv motor which is a bit shorter than the 800 shown here will run fine with the Max6, I have not confirmed this. I have a video with the 1100kv as well so check my other videos out and it should be right there at the top.
Pretty sure he said the castle 800 edges this out slightly but the hobbywing is cheaper and if you are buying a combo with esc the max5 is wayyy better than the mamba x 8s
Great run with new hobbie wing. I have just ordered a X-Maxx 8s in Blue. Go to a live showing when it arrives and hopefully the batteries arrive by the same time. Will you fit a heat sink and fan on the motor?.
So i got one , 8s and all, and i was wondering if the stock setup handled heat well enough. I didnt have any issues yet but i just recieved it 4days ago and didnt really pushed it ..
@@mikelagaffe I haven't had any issues but ya it heats after about 28min of running a red light come on so let it cool then can go again as it says in the instructions. That is doing full throttle now and then.
I just cut slots in the chassis and run Velcro straps through them. Nothing special at all. In fact I took them out and went back to the stock holders because I really don’t need giant batteries in the truck. Giant batteries add a lot of weight but do give long run times. I use the cheap Turnigy 5000mah 4S batteries and they run fine and are light.
@@ExocagedRC thanks for the reply man appreciate that... Yea you right those big blocks will definitely add on much weight.. I was trying to check other options besides the Traxxas 6700 25c.... I'm going max 6 wanted a lil more punch ya kno
Good morning exocaged! What's up bro! I have a question for you! That GT5 radio you have! How is your performance, experience and how you like it??????
Monster RCs I really like it. I am using it on 6-7 vehicles now and the distance is plenty good enough for me, the latency feels as fast as the futaba 4pls I have and I’ve had no issues at all with it
@@ExocagedRC I was really into RC back in the early 2000s about the time the T-MaxX and E-MaxX were the top of the line RTRs. I had the Nitro Pro 15 version and the E-Maxx. But from what I can tell they have nothing on what they have now. I'm used to 10 turn motors about the size of a D cell battery. Brushless motors were just beginning to become a thing when I got out of RC. Make me want to get back into it.
One thing I for got that 56113 motor what is the max weight it can handle in a rc truck can you please find that out for me it will be very helpful ohhhhhh yes keep making those awesome video's
Good info! Thank you! I’ve had my eye on this setup for the 5ive b build I’ve been working on. I’ve never used anything but Castle for my brushless setups but I may defect after watching this. We’ll see???😉
rc Ohio go hobby wing I ran castle when I raced shortcoarse 4x4 and junked our three in on day complete system switched to hobby wing and never been happier
This channel even said the more expensive castle 800kv motor slightly edges this one out but max5 trumps mamba x 8s esc for about $100 less. Im going hobbywing for 99% performance at 75% price
I just bought the XRT and also bought the Hobby wing Max 6 combo. Could you recommend a couple different gear ratios that would work with this setup. Just now getting back into this sport. Haven’t been around it for about 30 years. Lot to learn. Any recommendations would be appreciated. Thanks
Hello mate finally I fit this combo in mine xmaxx and to be honest I cant hit full throttle it goes so fast. Maybe I need to change setup on esc u can see my video and give me some advice thanks.
Hello again! Is the Spektrum 780Kv in the Losi DBXL-E 2.0 an off-branded Hobbywing motor? Or is this 780kv only made my Spektrum? I can't seem to find any videos on the motor on youtube really...
@@ExocagedRC beautiful, badass video, but I have a question? I brought my hobbywing 800kv and max5 from hobbywing! On punch=5! How do you truly loved the speed and bashing performance???
I dont know why people has to disrespect baseball fields... Its not free to rake the clay to have people with RC's trash it and maybe digging grooves into the clay. Lot of these public baseball fields runs off donations or tax and such for kids to play sports and some of the people who work to maintain them at times volunteer. There's that one RC YT guy that took his RC on a baseball field that was just raked and had fresh chalk lines put down and he trashed that whole field that was had a game not long after. Least you did not do it when the field was just prepped up for a game.
I wouldn’t tear up a freshly prepped field, most of the time I stay off of them totally but in this case the ground was hard and all we moved was top dust. Nothing got dug out that we saw.
@@Make-Asylums-Great-Again Because that is the whole point of the comment section here. I mean you did so that is quite ironic lol. When you see kids trash stuff thats not theirs, you will say something so why complain when i do it? Thats a bit hypocritical...
@@gonzodetroitify I am a hobbywing dealer and a max8 and 2200kv motor would be great in there. Look up my Facebook page Jax RC Recycle and Repair, LLC if you are interested
Fred Ocampo 30/35 is a great gear for that motor. Have you messed with the timing any? Stock? Maybe turn it down if you can. Just a single number or so. Mine has never got that hot man.
Hoping to get this combo for my xmaxx once they re-stock the motor mount. How does the rest of the drive line hold up bashing (diffs, cush drive, driveshafts)?
Would adding grease to the gear mesh help out with temps at all or will it just spin out and get everywhere? Is there a setup for belt driving the Xmaxx and is it feasible?
Things get very technical with KV. With a motor this large the KV is low so you e to gear up a lot higher to retain speeds or go faster. These motors make a LOT more power so they can do this. But yeah a lower KV is slower but in many cases when dealing with a much larger size, they are way stronger.
It accelerated so fast that it became an out-of-body experience!
Swapping phase A with phase B re-orders the fluxes so that the flux rotates in the opposite direction. Swapping B with C does exactly the same thing as does swapping A with C. Think of it like a triangle with corners called A, B and C. If you swap any two corners and follow the points A, B and C you'll go in anopposite direction. Swap two more corners and you're back to the original rotation.
Sounds like your mesh is off, throw out the pins and set it manually. I learned that the hard way! Even with stock motors. This mount your using, looks like the adjustment is on the front of the motor mount. Sounds tight. FYI. Thanks, great video!
There are no pins with this setup and the gears are mod 1.5.
Absolutely brutal, 8Hp power, wow, that motor is for a car can carry you on 😂😂😂😂😂
That things a beast and looks like lots of fun.
That "sensor port" was labeled "Temp". A temperature monitoring feature for guys who like running the bigger pinion.
yes, from what I was told by the HW guys the next generation of ESC's for these motors will be able to use that port to keep things in check. I mentioned will it work with telemetry but didn't get an answer on that. With the big pinions the 30/35 I ran in this had no heat issues at all, maybe with extended runtimes bashing around may bring them up a bit or a 1-1 ratio.
That thing is wild, those drifting wheelies were wicked awesome.
Very perfect combo from Hobbywing and nicely done for the review my friend :)
Thank you
Wow that was ripping good! Was curious about the HW 800kv. It doesn't seem to get used much. I may have to try it. I have the older 780kv 2028 castle and the 800kv. I honestly don't notice a difference other than the 800kv is 12s capable. Sweet Xmaxx guys! Love it!!
Never been that much into rc cars/trucks since w was a kid. I do Rc Heli's now. But that looks fun as hell!!!!
The Xmaxx is an awesome truck
I don't think you're going to enjoy hell but I'm sure you'll give it a try
Awesome!!! I'm looking to put the Max6 + 4985 in my Notrorious.
Oh my gosh 🔥🔥 that Maxx is hella fast👍🏿as soon as it took off the first time that thing was floating
I love your video about motors and how they work my favorite one that you did was the 56113 very powerful but it looks to me you really like Hobby wing
I do now, I used to be a hardcore Castle guy but the last year or so HW has really stepped it up. A LOT.
dude Berzerker from ATB as the opening song?! haha i had to replay like 10 times to make sure the song wasn't coming from my computer
Great video 👍🏻 That HobbyWing 800kv motor makes it a beast💪🏻💪🏻💪🏻
What a good truck to set up something like that
That was cool he sounded like he was having so much fun just laughing away LMAO. I always like seeing your creations and I'll have to send one of my body's too you for an autograph. All right everyone have a great day and don't let off the throttle
LOL that would be expensive in shipping
Please don't crash it that far away!!😂😂😂😂😂 you have no idea how many times I've said that 😀✌
LoL he was close!!
Holy shit bro !!!.. best R / C power slide movie around a baseball diamond that I've ever seen. That is definitely a first. Kudos. Keep up the good work.P.S. watch out for those fences. Somebody keeps putting them in your way LOL
Thanks bro
12:00 I think the ESC deserves at least the credits the motor received!
That turned the X-maxx into an even faster beast! Wow!
Y'all need to run RC on a softball/baseball field where the infield is all clay. then you can drift in circles for days. :D (Voice of experience.)
I have a Rustler 2wd that I've heavily modded. The Gearbox, the drive shaft, the body widen slightly with Carbon Fiber plates to fit the Max 5 and I'm using a TP 4070cm 2200kv motor and I can't tell you how amazingly fast and powerful it is. I just can't find anywhere to run it. I can only run it max a 3rd throttle and then I have to break hard. The fastest I've gone is 81mph not because I can't go faster, definitely not but because the I just don't have much room to run it.
55mph??? Holy hell, thats great.
That’s a beast of a monster truck. I don’t own one but I have 9 other traxxas Rc vehicles and they are all phenomenal. My two mini e revos and my big 1.0 previous gen e Revo are my favorites. I also have slash’s, a bandit, rustlers, stampede 4x4 and that’s it. I was planning on getting a XO-1 also. I’m not sure though man.... I was eying the Xmaxx for a long time.
Man my xmaxx is my best basher. Truck is awesome
Yeah, that motor looked good on that.
Sweet drifting! I know some ground crews that would NOT be happy;)
I am always enthusiastic about Hobbywing. I am more into RC crawling but the engine in your video has real power :)
Imagine that beast in a rc boat🔥🔥
U mad in a boat lol
Beautiful motor and GEARS
Sweetness, that thing hauls ace!
More HP than a honda civic :D :D
I pull neighbours golf II with my brushless summit, imagine what this thing can do :D :D
Golf II? Where do you live? Montenegro? Serbia? :)) no hate
@@MaramuresDualSport haha :D No, my neighbour is some kind of a WV and audi addict, so his 700whp MKII is some kind of a sleeper :D
My civic runs 12 second quarter miles . lets run for pinks
it makes around 8 mechanical horsepower.
@@alexsiniov vw sucks junk. 700hp haha yeah right.
Good video👍🏻👍🏻 That upgrade turned the truck into a beast. 💪🏻💪🏻 I look forward to more footage down the road. 🤜🏼🤛🏼✌🏻
Awesome run guy's 👍👍 thing was hauling wow😁👍
as much as i like power - i wouldn't put the max5 in my xmaxx, im kinda happy with the stock motor.
Plenty of power for jumps and offroading. As the xmaxx has a high center of gravity, it wouldn't corner very well anyway.
However, that esc and Motor is going into my Kraton 8s which i bought as a roller - figured the power trans fits much better with the Kraton Chassis :D
That dude just fucking gunned it, didnt even try to stop LOL 5:24 Youre a brave man letting him drive that.
LoL yeah that’s Sean for you.
Definitely need music over the bashing and slowmo. Love that engine and escape combo
Wow!! Haha huge motor! Very cool
Im about to be trying out a 1750kv in the rustler 4x4 on 6s. Had a 3000kv in it on just 3s an nothing could keep up. Clocked it in at 80 on the sand with just rear paddles.
So I love the video...helped me alot...got the same set up....but what would happen if u ran a 25 or 28 pinion gear....35t on spur....would a lower pinion gear make the rc truck slower....more cooler and battery life..or play time
Keith Black yeah if it had a 25t pinion it would simply run slower but last longer.
What was the reason for the motor swap if they both are 800kv?? just curious
He is showcasing the hobbywing, it’s not a video intended for comparison
Good video can't wait to do my Savage x
Roosevelt Raines jr I used to have the castle 2028 in my savage flux xl with an Alza motor mount.
I am just wondering if the gears can handle this much power when you start bashing it hard. It also looked like there was more speed potential in it. Was it on full throttle or was the field too small for that? Great video.
B&M killing it
Yes they are
"Meh this looks interesting enough"
*opens with After the Burial*
"Oh shit oh shit oh shit!!"
Great video man! big like & subbed to ya! Hobbywing makes some good stuff and this 800Kv motor does the cake for sure. thanks man
awesome welcome to the channel, I have a LOT of videos on most everything.
@Markus Dimitri ...maybe you can help me ? What is the kV limit on this esc?
Look at the engine.the car is strong.i live your video
I love these proline wheels...but they are 300grams heavier per wheel from what I know. Do you think its a problem when it comes to really hard bashing?
great video, did you keep the 800 or 1100 in your xmaxx ?
That thing sounds like it has the oem diff's and bearings.
its not the diffs and bearings its the mod 1.5 gear you hear, are you daft?
Daft big words for an rc guy
I didn’t even run my xmaxx once before switching to the max6. Sold the stock esc to get the max6. I am happy with it for now. Looking at hobbywings website the biggest motor that pairs with the max6 is the 4985. Isn’t that smaller then the stock one that I have already?
I've heard quite a few say the Hobbywing 1100 kv motor which is a bit shorter than the 800 shown here will run fine with the Max6, I have not confirmed this. I have a video with the 1100kv as well so check my other videos out and it should be right there at the top.
I have the Hobbywing 1650kv motor as well but I'm waiting on a mount from B&M RC to get that mounted up and tested.
Which was better then? The castle 800 or this hobbywing 800?
Pretty sure he said the castle 800 edges this out slightly but the hobbywing is cheaper and if you are buying a combo with esc the max5 is wayyy better than the mamba x 8s
One day I’ll get an xmaxx. You done got on crawling haha. Then after I got into crawling, no more P-ville haha. But great videos and content.
Very cool machine!
Great run with new hobbie wing. I have just ordered a X-Maxx 8s in Blue. Go to a live showing when it arrives and hopefully the batteries arrive by the same time. Will you fit a heat sink and fan on the motor?.
Yeah I probably will at some point but these big motors don’t really have heat issues like smaller motors do. They just move the truck really easy.
So i got one , 8s and all, and i was wondering if the stock setup handled heat well enough. I didnt have any issues yet but i just recieved it 4days ago and didnt really pushed it ..
@@mikelagaffe I haven't had any issues but ya it heats after about 28min of running a red light come on so let it cool then can go again as it says in the instructions. That is doing full throttle now and then.
Very quick than factory VXL-8S and 1275KV
That thing looks like a monster
We need a good video on the xmaxx battery tray mod u did.. So many on RUclips are terrible
I just cut slots in the chassis and run Velcro straps through them. Nothing special at all. In fact I took them out and went back to the stock holders because I really don’t need giant batteries in the truck. Giant batteries add a lot of weight but do give long run times. I use the cheap Turnigy 5000mah 4S batteries and they run fine and are light.
@@ExocagedRC thanks for the reply man appreciate that... Yea you right those big blocks will definitely add on much weight.. I was trying to check other options besides the Traxxas 6700 25c.... I'm going max 6 wanted a lil more punch ya kno
Good morning exocaged! What's up bro! I have a question for you! That GT5 radio you have! How is your performance, experience and how you like it??????
Monster RCs I really like it. I am using it on 6-7 vehicles now and the distance is plenty good enough for me, the latency feels as fast as the futaba 4pls I have and I’ve had no issues at all with it
My Man! I really appreciate again bubby! Mmm by the way! How much it is????
Monster RCs they range from $75-$85 depending on where you buy. If you want an eBay link I can get you one.
@@ExocagedRC Cool! I really appreciate hit me on Facebook messenger Jeremy pete! When you get a chance!
Awesome. is this 6s or 8s?
Apart from the mod 1.5 pinion/spur gears, is the rest of the drive train a stock 8S system?
Yeah rest is just 8s
Is that a motor or a 12 ounce aluminum can?
lol
@@ExocagedRC I was really into RC back in the early 2000s about the time the T-MaxX and E-MaxX were the top of the line RTRs. I had the Nitro Pro 15 version and the E-Maxx. But from what I can tell they have nothing on what they have now. I'm used to 10 turn motors about the size of a D cell battery. Brushless motors were just beginning to become a thing when I got out of RC. Make me want to get back into it.
Blender Rookie yeah man the modern brushless lipo trucks are amazingly strong fast and relatively quiet.
i wonder how it would go with double that power
One thing I for got that 56113 motor what is the max weight it can handle in a rc truck can you please find that out for me it will be very helpful ohhhhhh yes keep making those awesome video's
T.House I think it’s rated to 25lbs for 2wd I’ll send Hobbywing an email and verify
Impressive!
Good info! Thank you! I’ve had my eye on this setup for the 5ive b build I’ve been working on. I’ve never used anything but Castle for my brushless setups but I may defect after watching this. We’ll see???😉
rc Ohio go hobby wing I ran castle when I raced shortcoarse 4x4 and junked our three in on day complete system switched to hobby wing and never been happier
James Castelos thanks for the info!
This channel even said the more expensive castle 800kv motor slightly edges this one out but max5 trumps mamba x 8s esc for about $100 less. Im going hobbywing for 99% performance at 75% price
I just bought the XRT and also bought the Hobby wing Max 6 combo. Could you recommend a couple different gear ratios that would work with this setup. Just now getting back into this sport. Haven’t been around it for about 30 years. Lot to learn. Any recommendations would be appreciated. Thanks
WoooooW very nice amigo
That RC car is a freaking beast!!!!
Hello mate finally I fit this combo in mine xmaxx and to be honest I cant hit full throttle it goes so fast. Maybe I need to change setup on esc u can see my video and give me some advice thanks.
Should’ve got a traxxas
Great vid. One of the best XMAXX vids I've seen. What are the Mod 1.5 gears? Are they a must to get the HW system to preform like that?
They are a stronger larger tooth gear. You can get them from WFO or B&M RC.
Beast!
Hello again! Is the Spektrum 780Kv in the Losi DBXL-E 2.0 an off-branded Hobbywing motor? Or is this 780kv only made my Spektrum? I can't seem to find any videos on the motor on youtube really...
I honestly don't know but it wouldn't surprise me of it was another rebrand.
@@ExocagedRC thank you, sir.
Awesome video😄, can you do a video on the battery strap mod ?
i have a 6000kv system in my 2wd tamiya.....thats f*ckn crazy and undriveble
Thank you BIG Boss! Loved the video I'm going to get me! A hobbywing! Castle@$$.Creations is pissing me off.
make sure you get it from an authorized dealer for any possible warranty issues. Thank you for watching!!
@@ExocagedRC beautiful, badass video, but I have a question? I brought my hobbywing 800kv and max5 from hobbywing! On punch=5! How do you truly loved the speed and bashing performance???
Monster RCs I haven’t felt the need for any more punch. No kidding it’s got so much power it’s fine at 5 for me
@@ExocagedRC Hell yeah I really appreciate it thank you. Have a bashing weekend.
How much run time do you sacrifice from a stock engine ?
Thanks in advance
Amazing you guys created a real monter I love it
bravo bato bas ti je lepo.
Which is the most powerful motor for the xmaxx? 800 kv or 1100kv ? Green or black one ?????
1100kv Green
such a smooth clip! what are you using to stabilize it?
Isn't that temp sensor port for the water cooling system used with these motors. Don't know if that temp sensor is for ESCs
The application shows the temperature, speed, rpms and batteries power
I dont know why people has to disrespect baseball fields... Its not free to rake the clay to have people with RC's trash it and maybe digging grooves into the clay. Lot of these public baseball fields runs off donations or tax and such for kids to play sports and some of the people who work to maintain them at times volunteer. There's that one RC YT guy that took his RC on a baseball field that was just raked and had fresh chalk lines put down and he trashed that whole field that was had a game not long after. Least you did not do it when the field was just prepped up for a game.
I wouldn’t tear up a freshly prepped field, most of the time I stay off of them totally but in this case the ground was hard and all we moved was top dust. Nothing got dug out that we saw.
Why complain?
@@Make-Asylums-Great-Again Because that is the whole point of the comment section here. I mean you did so that is quite ironic lol. When you see kids trash stuff thats not theirs, you will say something so why complain when i do it? Thats a bit hypocritical...
Would this motor work in a dhk maximus with work for motor bracket,
Powerful video too,
just P. X it’s way too big in size.
@@ExocagedRC OK, so keep within the 2260Kv it came with, I mean the motor dimensions
just P. X yeah stay with a normal size 1/8 size motor but don’t forget about the esc. That needs to be stronger as well.
@@gonzodetroitify I am a hobbywing dealer and a max8 and 2200kv motor would be great in there. Look up my Facebook page Jax RC Recycle and Repair, LLC if you are interested
@@slarmond38 sure will
Hey man what servo are you running? Since i swapped the max 5 combo my steering sucks.
Stock servo, not sure why the steering would change with a Max5. Maybe the front tires aren’t on the ground now? 😂😂 LoL I had too!
Geez that’s nuts! I like it lol
What gearing did you have in this?
Thats awesome dude
Thought this was kev looking at the thumbnail
Awesome! I got the same setup but my temp on the motor was 170-175 degrees. Is that too hot?
Fred Ocampo I’ve never had this HW or the Castle 2028 get that hot. What’s your gearing? Driving in sand?
Exocaged RC B&M 30/35 gearing. Driving on medium to short damp grass.
Fred Ocampo 30/35 is a great gear for that motor. Have you messed with the timing any? Stock? Maybe turn it down if you can. Just a single number or so. Mine has never got that hot man.
Exocaged RC Si the settings are all default on the esc except the punch is set to 5. How do I adjust timing On the motor?
Regarding the losi dbxl-e 2.0. Would you recommend the max5 combo 800kv or 1100kv. Why?
what diff oil do you use front and rear in your x maxx ?
Hoping to get this combo for my xmaxx once they re-stock the motor mount. How does the rest of the drive line hold up bashing (diffs, cush drive, driveshafts)?
The truck seems to take the power fine. Everything can break but for the most part it’s good to go.
Snuck a max5 into my kraton 6s, had to move receiver and batt tray. Deciding on what motor, any suggestions out there? ✌️
With that esc you can run anything you want. LoL. If you have room how about a 1650kv?
@@ExocagedRC Thanks for the advice👍
what about that rumor that the motor-cables are part of the winding? If that is untrue the cables could super duper shortened in that configuration :)
Would adding grease to the gear mesh help out with temps at all or will it just spin out and get everywhere? Is there a setup for belt driving the Xmaxx and is it feasible?
Grease will make a mess. Yes B&M RC makes a belt drive for them
Exocaged RC ok thanks 👍🏾
Also saw a belt drive for it on the wfo site
Can you explain to me how the kv system works. I was under the assumption for the longest that the lower the kv the slower the system would be
Things get very technical with KV. With a motor this large the KV is low so you e to gear up a lot higher to retain speeds or go faster. These motors make a LOT more power so they can do this. But yeah a lower KV is slower but in many cases when dealing with a much larger size, they are way stronger.
@@ExocagedRC Awesome thanks for the reply!
Hobbywing 1100KV vs 800KV...which was your personal favorite?
I liked the 1100. In fact I’ll soon be started on a new video with the HW 1100
What was the point of changing motors ?
Whats that grinding noise ?
Mod 1 gears
@@untamed06tbss odd. My mod 1 or 1.5 gears dont sound like grinding..
My gears are not the best.
Was run time from stock effected at all?
A little shorter but not much when gears right.