11 year old rusty air compressor to paint a car 🤯👎🏼
HTML-код
- Опубликовано: 26 авг 2024
- In this video I used my small DeWalt air compressor and the AeroPro a160 spray gun first trial was a fail shortly after recording the video I repaired the compressor and have it ready to go so the next attempt should be a home run 🏏⚾
I personally think this might be a good set-up for someone who wants do do side work at car lots spot in repair work. you're not painting a complete car with this but little mobile work this week work. throw in the the trunk of your car or in the back of your truck and close your top and it's protected and mobile ready for any small smart repair job. 💪🏼
You killed it Triggerman 💪🏾 I’m definitely ready to see what you do with a actual working compressor 💯 I greatly appreciate you for the shoutout and appreciate everyone showing love in the comments, this is how we should be building the paint community by working together for the benefit of everyone 🤘🏾
Amen on that one brother 🙌🏼 and no problem Champ 🏆 💪🏼💯
WHAT'S UP UPK,THERE IS A NEW AEROPRO CALLED THE YT 160,IF IT IS POSSIBLE,CAN YOU DO A REVIEW ON THAT THEY SAYQUOTE ON QUOTE THAT IT PRODUCES 260 LITERS MORE AT THE SAME AIR CONSUMPTION,I REALLY WOULD LIKE TO KNOW IF THIS IS TRUE?
@@lesliwells5433 I’ll look into it
Thank you for all the effort to show the people trigger! You are appreciated my dude!
Thank you Stephen. You're more than welcome. ♥️
Awesome of younto give props to UPK brother, good to see channels shout out to others. I actually havent checked him out as yet, but definitely will.
I take my 40litre compressor with me on weekend jobs (around 9 gallons) and even then i have to be a little patient at times, big balls my man. Great idea for a video, i really enjoyed it 😉🤙
Thank you man. Yea I think I need a bigger compressor lol. But I will see how much I can spray with this fella 😂 thanks for watching brother gave a great weekend 🍻 ⛳🏌️
@@thetriggerman954 always lurking in the shadows bro 😜. Have an awesome weekend yourself. I'm going to get back into the weights, you motivated me 💪.
Shoutout to UPK ! Trigger you handled that small compressor like a boss! Welcome to the small compressor paint job club my man! Lol
That's brother. I think I like this community better. You guys are more chill 🤣 I been catching hell with the divas of the professional world. Thank you Grant I appreciate it mane 🫡👊🏼
@@thetriggerman954 lol…. I’ll say this… “the community within the community” is chill… we get a lot of hate from the big compressor guys talking about about “I see orange peel” “there’s no way anything less than a 60 gallon can paint a car” …. It’s hilarious my man… but u are doing a good job handling your trolls. Continued success to you and your channel
@@Grant7 thank you brother. And thank you guys for welcome trigger Into the brotherhood 🙌🏼 I'm a lil hot tempered and got to make sure I don't let the trolls trick me off my channel Ya dig. 😅😅👊🏼💯
Respect @ TriggerMan for keepin it solid and givin UPK his shine. Datz what sets u apart from everyone else. Big shout out to UPK. . and of course . . @TriggerMan ALWAYS keeps it 💯💪
Thank you Big MF yea man I keep it 💯 with those that are solid with me. I appreciate the support brother 🫡
UPK got what looks like a 60 gal with med belt drive motor. And a full dryer system at 50ft..
IMO 80 gallon is still a small compressor if used alone with a small or Med Motor. 120 is a normal small size with large motor at the older rent a booths here in California. $140. a day. $85 for 4 hours. Newer booths are around $250 a day. 200 gal compressors And they are usually behind an auto paint supplier. I've used that same Dewalt for air brush touch ups. Motor is tiny. I think we are all more interested in whether that gun is a good starter that can continue into the big compressor and rent booths. And you answered that. A little slow but will get the job done.
Great video.
Thank you Clyde. I'm sure there are some guys with little compressors that might be interested even if it's only a few people. But I'm glad it answered your question. Thanks for watching 💪🏼
Triggerman, you forgot about this gun and small compressor. We need to see it. 😎
I know man, I've actually been spraying with it this week to feel the gun out. Going to shoot the vid probably this week 💪🏼🤜🏼🤛🏼
I use a r500 everyday for primer at work for the past year. I prefer it over my devilbiss gpg. Helps keep the overspray out the shop . i also use a r500 at home with a 30 gallon 8 cfm oiless compressor. Works great. I will say for any lvlp you need at least 20 gallons of air. Upk uses a 21 harbor freight just fine. I've even done a whole car with a lph 400 with my 30 gallon. Set the out going pressure on the compressor to like 60 psi and it'll bump your cfms up. Lph only use 9 cfm which is still pretty low. The ani f160 only uses 8 cfm. My setup is perfect for a mobile business or home shop. I live in the hood so leaving compressor outside isn't a option for me. Crack heads stole my 80 gallon kobalt 2 years ago. Bought the gallon so i could take it in and out the house
Lmao got dam crack heads 🤣🤣 man I'm too familiar with that. I feel you man. I'm just playing around with this thing to see how much of a car I can actually spray with it. UPK has a bigger one but he also uses it to spray overall paint jobs and we know you won't spray an overall car on the mobile so this may work for people just trying to do small repair work, spot in jobs at car lots etc... Thanks for your input man. It's appreciated 🫡
Just got my version R500 and man Trigger, it is a beast, as you said it is a fast mover and puts out a lot of material, still trying to get it dialed in, using it on a lil Husky 20gal
Great content trigger, this kind of video helps people understand the equipment and mechanics behind atomisation and understanding gun set ups. People can say what they want but your out there taking the risks with different equipment to bring something different to the channel. 👍
🙌🏼 thank you Scot yea man I'm trying. Luckily the shop I work at I can try all of this craziness. Cheap guns micro compressors. The owner was like WTF you're going to paint this Mercedes with that compressor 🤨 but he knows I put out quality work and I'll get professional results regardless. I honestly never thought I'd be doing this on the channel but that's what the people want and it's fun. So it's a win win. Thank you for your continued support I appreciate you. 🫡👊🏼
Looking forward to more vids using this gun with good air and see what it can really do. I really like mine. Working at home I've been running it at 20-22psi for base and about 29psi for clear. Your the first vid I've seen with it running at 40psi. Good vid trigger👍
Thanks man I'm going to do a bunch more vids. And also I'm not using the gauge that came with the gun I've heard that they aren't accurate I have a better quality gauge on the gun. So not sure if that's why the difference in psi. But I'm going to be playing around with it. So stay tuned. And thanks for watching 💪🏼
Hey, just wanted to mention Aeropro and Rongpeng are the same Chinese company, just different marketing brands. Aeropro A610 is same as Rongpeng R500. They also make the Vevor gun...its called R802 at Ronpeng, A604 at Aeropro. All a bit confusing. But Vevor gun and gun in this video are made by same company .....so seem they make some good stuff! Also Vevor gun is supposed to use no more than 4.5cfm air....so it should run pretty well on larger DIY compressors. Don't know if you noticed in the real world that Vevor gun uses less air? I just bought a Vevor so hope my big DIY compressor can run it....
Cool thanks for the info. The Vevor gun that I have I think it uses a lot more CFM I know they have a few models. But I'm going to be playing around with a few. Thanks for the heads up 👊🏼🫡
I keep up with the UPK too he's a good dude. I have one of those guns but on for primer 1.8 $35 I think it was and I love it nice fan and spray primer nicely.
Yea he a solid and genuine dude and I have the utmost respect for him. Dang they have this gun in a 1.8? 🤔 Might have to check into it. So far I'm liking it. Looking forward to doing more videos on it. Thanks for watching man. I appreciate it 💪🏼🫡
@@thetriggerman954 🫡👍🏿
I hooked up one of those motor guard filters to the wall. Quick connects so I can switch from the 20 gal or the 60 gallon. That Dewalt def. Has enuf pressure for that lvlp gun(with no leak). Very efficient gun. Really, surprisingly good. I have use them for sealers, quick jobs, base. Not my favorite for clear, but it can do the job.
Upk was right saying to haul out a small compressor. But you hauled out a mini! He uses the 21 gallon Harbor Freight on the videos. Entire car more than once.
Got my 3m pressure cup and pps adaptor for the Apollo turbine set-up. Still going for it. Full paint job 87 Jeep. I know it works for base as I tested it. Unlimited clean air. For clear coat, i will need to experiment. This is not compressor painting. If I get a bit too much texture at first, no biggie. I',m already committed to a cut n buff. Will post the results on a video short when paint day is here.
Running long on the comments(again). Good job on the partial demo. I know i'm not the only one who would like to see you try it again👍
6: 41 on Sat and i'm about to head out to the garage for sanding and more primer this morning. If nothing else, i am persistent😅. Enjoy your weekend Trigger!👍👍👍
Thank you Big Bear yea man I only have that little compressor but who knows maybe someone has a tiny compressor and want to do little spot in work for car lots something you can throw in the trunk of a car and go make some money. I know it's small but who knows who it can help out there. Thanks for your input I'm sure all of this will help help someone out there. Have a great weekend 🍻🥳
Trust me man your the best man
Thank you Randelle just doing my part brother. Want to help as many guys as I can , learn to spray and make some money to provide for their family.
Got the r500 and the a610, great for us hobby boys
Liking the vibes man you got a new sub 👍🫡
Thanks brother. Welcome to the channel 😎
Great video as Always. Thanks for sharing
Welcome Chris, thank you for watching 💪🏼
Another great video trigger man keeping it real
Thanks brother I appreciate it 💪🏼🫡
Hey Triggerman, love the content but I have a question. Are you from Louisiana because you sure have that accent?
Thank you man. I was actually born and raised here in fort Lauderdale but I went and spent summers in the country part of Georgia growing up. Dirt roads and trailers. Never been to Louisiana. Might be all The Juvy and BG, wack and skip I listen to growing up. Woooooday 💪🏼
Thanks for the info triggerman.
Welcome man. Thank you for watching 🫡
You keeping it 💯👍👍
May God take my last breath if I give you anything less 🙌🏼
Link to that filter please?
What up man sure here is the link. Let me know how you're liking the gun.
amzn.to/4bCkGai
AYYYYYEEEEE,TRIGGERMAN,TRIGGERMANI NEED TO KNOW HOW IS IT POSSIBLE,AEROPRO A610 ONLY HAD 110 LITERS PER MINUTE,THER NEW GUN THE AEROPRO YT160 HAS 360 LITERS PER MINUTE,WITH ALMOST THE SAME AIR CONSUMPTION,WHAT ARE YOUR THOGHTS ON THAT
Sounds like some 🐂💩 to me man. Doesn't make sense. I think those cheap guns just have say anything on their info 😕
@thetriggerman954 I JUST FIGGERED IF YOU NEEDED SOME CONTENT ON THESE NEW CHEAP GUNS, THERE YOU HAVE IT,I NEVER PAINTED YET,BUT ONCE I GET THAT TRIGGERMAN SPUNK,I WILL FUNK IT UP AND GET ME AN IWATA AND A SAGOLA EXTREME
@@thetriggerman954 PLUS I SAID TO MYSELF IN MY MIND THIS JUST CAN NOT BE TRUE,THAT'S 260 LITERS MORE WITH ABOUT THE SAME AIR,MUST BE NEW TECHNOLOGY, OR IS IT HMMMMMMMMM
MAYBE YOU CAN GET THE UPK TO TRY IT OUT,TO SEE IF IT CAN 🕺 💃
@@lesliwells5433 message him and ask him 🤣
Do U think the aeropro would be
good for polyester primer?
I need to spray with it more. I've only used it this one time. And to be honest I didn't really care for it. But I'm going to do a few more jobs with it before I write it off.
I wouldnt dare spray less than a 30 gallon, just asking for fisheyes
Me neither, but who knows someone may be wanting to do mobile touch up work. Perfect for spot in work from the back of a truck.
Try the devilbiss gpg with 7e7 air cap
I'll have to look into it. Is that an LVLP gun?
@@thetriggerman954 sure is with the 7e7 air cap
@@lilearlus4711it looks like it's an HVLP with the 7e7 cap.
www.eastwood.com/devilbiss-gpg-gravity-7e7-1-2-1-3-1-4-cupped-905015.html
I’m trying to do some at home work. Paint my 86 4Runner but need to know what size and hp compressor is needed
You're trying to paint the whole truck?
You definitely need to contact UPK "underground paint King" He can tell you right off the bat what compressor you need to paint anything.
@@thetriggerman954 thank you I’ll try to hit him up. I’ve never had a RUclipsrs reply like you do. Thank you. Yep the whole truck!
@@nickcrill7718 man that's gonna be fun 😂 yea I'm still a small channel so I can reply back to everyone. Now once I get to 300k subs it might take me a few days 🤣🤣 but for now I got you bro. UPK helped me with some compressor questions he's really knowledgeable of that stuff. 💪🏼
I would say m9st people can aford an 30 gallon if they can afford an 6 gallon or 15 gallon they are not much more price wise! An 6 gallon runs about $180.00 for an good new one ,15 gallon about $300 and an 30 gallon is about $600! I use to have an 30 gallon husky 2 phase 7.5cfm rated and it performed greatly
Also depends on what they are doing. If mobile something like this fits right in the back of your truck close the top and go. So it all depends on the situation. But thanks for chiming in.
At 10 psi u can use the lph-400 purple cap. It requires that pressure.
I'm actually going to try the LPH I think it' might give a better finish and use less PsI. You read my mind Trey 🤔 I'm going to try the silver cap. I know I have an orange cap too I had a purple I think it's in my shed. Lol but I'm going to play around with them.
@@thetriggerman954 the purple is made for metallic they call it the super Basecoat gun and I can agree I love the purple cap. Like when I really want my metallic to lay down and good I pull that out.
@@treysterthepainterturner8404 how does the cap work for clear? If you've ever tried it
@@thetriggerman954 it did pretty good. I only used it twice. I said I would have to buy another to keep trying for clear. Kuz I don’t wnt to keep switching it up. But it did pretty good.
@@treysterthepainterturner8404 kk I'ma dig mine up thanks man. 👊🏼
Hello Triggerman, how much of a difference is there in material consumption between this gun and the lph 400.
This was my first time using this gun. And as you can see it would be unfair for me to give that opinion on this gun since I did not have proper air flow. I'm very familiar with the LPH 400 it's actually my favorite clear gun and material consumption is very minimal with the LPH400, I plan on making more videos on this gun in the very near future and I'll be able to give you a more accurate opinion.
@@thetriggerman954 Yes, I observed in the video that It was a small compressor that I word with and it almost ran out of air, but hey, I'II be on the lookout for future videos, I have the lph400 but I've seen good comments about that gun that I tried, personally I am looking for one whose overspray is very low because I do not have a very good vapor extraction
@@jesuszaragoza2473 well as far as over spray I'll tell you right now LPH400 has that gun beat. It put out way more over spray than the LPH. Even with not enough pressure I had a fog in my spray booth.
@@thetriggerman954 excellent man, I did not want to buy it and surprise you that it would cause more overspray, I run my lph 400 at 16 psi as the manufacturer marks it, I have not tested it at more psi, I see that in many videos they raise it to more psi, I even saw in some videos that It counterproductive to run it at 16 psi and I have seen that they run it at 29psi.
@@jesuszaragoza2473 29psi with the LPH lol no way. If overspray is a concern definitely stay with the LPH I had to crank that gun up to 35-40 psi to get the same atomization as I would with the LPH at 17 PSI
quick question trigger why do you wind the fluid in instead of wide open and when should you run wide open
Certain guns depending on how the threading feels I will start from in. This gun has a lot of play when turning it out from closed so it's just easier to give an accurate setting going in from wide open. EXCELLENT question. I normally always spray with a fan wide open but some guns will distort at the ends or break up in the middle so on those guns you would need to start incrementally turning in the fluid. Great questions man. 💪🏼👊🏼
@@thetriggerman954 thanks man for sharing the knowledge, I'm still trying to learn and just have been spraying with everything open, trying to learn the settings
@@myblkz yea most guns are okay wide open but if you notice that something doesn't look right with a pattern Don't assume it's you or the gun start making little incremental adjustments It does take time but after you've been doing it for a while you'll you'll learn how to diagnose an issue right off the bat.
@@thetriggerman954 💪🏾💪🏾💪🏾
Man, triggerman can't win today. Is what it is cuz u tried lol. 20yrs ago I started in my parents garage w a lil ass craftsman compressor and a cheap Astra gun. Had to do a lil at a time and wait for pressure to come back. It's possible tho.
Yea man. The good old days right. Started at the bottom and we appreciate all those times. I know I do. That's what makes us great 🙌🏼 thank you brother 🤜🏼🤛🏼
hola tigre que marca de barniz usas ?
ProSpray
Show out jamaica bro
Biggup ✊🏼
Great video Triggerman thanks for sharing. Yea man i always watch UndergroundPaintKing that dude knows his stuff.
Yea man I honestly know nothing about these small compressors and LVLP guns. But I've want to learn right along with all of you guys. He helped me out even though the first run wasn't a complete success we gonna get it right. Thank you for watching man. I greatly appreciate you 🫡🙌🏼
The engine that couldn't 😂😂😂 you tried bro and with the compressor leaking what could you do. But yeah for like a two panel max and some skill it could have worked out fine and the gun does have a wide fan. So decent save tho and bruh I have 5 guns in the arsenal and no 1.3 😂😂😂😂👍🏽🏁🏁🏁
Dam SteelCity what tip you use?
@@thetriggerman954 1.4 1.8
@@steelcitycaprice.899 dam you got them hoses bro. The only gun I run a 1.4 is my Iwata LPH400 and my Iwata WS400 But hey as long as you get in the finish that you like it don't matter if you was using a 2.5 whatever gets the results big dog 🫡 And yeah it was like the little engine that could lol putt putt putt ,🤣
@@thetriggerman954 Matco scorpions line
@@steelcitycaprice.899 yea I keep hearing about them. Them shits pricey 🫠
Lol… I don’t think you can get 40psi blowing through the hose😂😂😂. So I see you figured the a610 out huh?!?
I don't like the gun personally 😔
@@thetriggerman954 well you did a good job with it! I still have to try out the rongpeng r500 to see if it matches the Eastwood concorse lt 100! I might have to buy the Eastwood to compare…Stay tuned!
@@dollabillbrunson8107 4sho lemme know. Hey what's going on with the Chevy truck paint job? Did you start it yet?
@@thetriggerman954 nah…. I was waiting til spring because the winter is gonna be rough in the northeast. My winter project is my 02 Honda Accord. I fixed it after the wife crashed it to a corner of a building. Tried the two tone thang, but I rather have it back silver. Plus I got crotch rot over one wheel well.😖
@@dollabillbrunson8107 yea I feel you. Don't need runs all over that big mf truck there. Smart 🤓 🤣
Desent gun,,looks a lil like a fog gun too tho..but u can work wit it
A frog gun? What in the heck is that Jo?🤔 Imma have to Google that 😄
@@thetriggerman954 lol,,shoot alotta FOGGY overspray.
@@joblo2299 ohh FOG man I thought you said frog 🐸 😄 and I'm not even drinking yet. Yea it seemed like it put out some over Spray I'm going to compare it to the LPH 400. If the gun operates good at 40psi for me and the Iwata operates good at 20psi with less over Spray then that could be a good test.
Even if that compressor was working fine it’s really not big enough for that gun.
Got it working and it sprayed great with no issues. So it is big enough for the gun and the size of the job. 💪🏼
@@thetriggerman954 that’s good to hear most guns even lplv cfm requirements are more then most small compressors can handle. I’ve been a mobile painter for over 30 years and I always check both before i buy a gun or compressor make sure their compatible.
@@theautoman22 yea I was surprised too. I have a video up with an even smaller compressor and an Iwata spraying a bumper and it did it without issue. I really didn't think these micro compressors could handle it but they did lol
😅
🤪
Lol faster than the dv1
Sure hate I bought mine
😂 that dv is a slow Poke man