Budget friendly LVLP automotive paint gun for small compressors.
HTML-код
- Опубликовано: 15 окт 2023
- In this episode, we take a look and demo a diy budget automotive paint gun for small compressors. I'll go over some of the many benefits of painting your car with a lvlp paint gun and why these guns are perfect for hobbyists and anyone painting their car at home without a paint booth.
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
ruclips.net/user/playlist?listj=PL...
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
As an Amazon Associate, I earn paid commissions from qualified puchases.
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
yt 160 lvlp paint gun 1.3 base/clear paint gun
amzn.to/3Qitr0z
finish1 fc710 spot panel clear
amzn.to/3M1ahd4
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise. 
Авто/Мото
Much appreciation for you walking through the variables of temp, humidity, and how to alter your approach and settings for the conditions. A lot of body shop instructors don't even cover that in much depth. Like everyone is working in perfect paint booth atmospheres.
Glad it was helpful!
Great video Chris, the YT-160 did a great job on the base and clear plus you could notice there was less overspray than your other guns which is a bonus for the DIY painter what I did notice is that it seemed slower laying the clear but that's probably due to it being a LVLP gun, I'll be adding this one to my list, finally got my Astro EURO-HE at the weekend and that is a cracking gun which sprays like my DV1 but it's less than half the price.
I did notice some flickering in the video Chris, this is probably your camera is being effected by your lights so if you can try changing your frame rate or shutter speed on your camera, it's only just started doing it so something might have changed in your camera, hope that helps🤔👌👍John
Great video Chris man u are helping us 👍🏻
👍
Wow, that gun doesn't produce much overspray and painting area free from paint fog. Great price and like the PPS cups and adapters that come with the gun.
It's a good bargain for sure.
@GarageNoise can I still use lvlp on HS glasurit clear with activator @ 30 psi 1.3mm tip
Good start up package for someone with whats included. Pps adaptor, few liners, ect. They should do a set with primer nozzle/needle)cap.
I'm still running with the turbine
From what they tell me I think they will add needle sets to it. Manufacturer hasn't made needle set for it yet but I believe the r500 needle sets will work. I'll be testing that soon.
Thank you for everything I am running from you
👍
@@GarageNoise where r u located??
I learn from you
@@GarageNoise
Lol they printed this video url in the instruction manual. I picked one up after finding your vid beforehand
That's intresting, This company paid me to do a promotional video for this gun. I didn't know they put it in the manual but that's ok. It a good gun that I approve of.
CHRIS, I love the video! i own this gun and love it. Did you use the same tip for color base and the clear? Also , i am repainting my 1980 corvette with single stage urethane, should i use the same tip as you did with this jobs clearcoat...Many Thanks
Nice job
👍
Excellent video! Does this gun work well with metal flake based paint? If so; Do you have a video showing how to spray metal flake silver or gold with this gun? . Thanks again!
Phillip Hall
since we started using waterbourne paint i been using glass cleaner as a prep before spraying and thats for both water and solvent paints
if you doubt glass cleaner like mr muscle etc try cleaning a bathroom mirror with panel wipe!
Wow ,ok so glass cleaner be the way to go you reckon? ....and is that before you put down your base coat ? .....I might give a go , thanks for the tip buddy much appreciated 👍🏾
ive sprayed a whole jeep cherokee with a 6 gal compressor and an hvlp... yeah there was orange peel and massive color sanding, but i say a 20gal compresskr with 4cfm and this gun is way more than enough. if they made an LVLP back then im sure id be fine with much less color sanding
It would've helped me out a lot when all I had was a small compressor as well.
i was told by a painter to turn my 21 gallon compressor air down from the 120psi way down to about 60 psi then set my gun regulater as needed...is this true or false🤷🏾♂️ love this channel
True, my wall regulator is set a 90 but it's a 60 gallon.
How big is the fan patterns!
What psi do you recommend for primer (dtm urethane) also bigger needle and tip too correct 1.7 or 2.0mm? For this gun of course.
What do you mean by cooler? What temperature are you at???
What size air compressor are you using?
which size small compressor sir?
Great job Chris the overspry is very low hey what do you think about the aeropro A608
I've looked at that gun, and at one point I was going to review it. Still may at some point.
Would love to hear about your recommendations for accessories to these paint guns. Which filter/ psi gauge you’ve found is the best
regulator and air filter for painting
That cheap gun does a pretty nice job
👍
Yes
I asked the seller for the air consumption and they said 300L/min which is over 10 cfm. I don’t know if that’s accurate since the description says 3 to 3.9 cfm
I think it's somewhere in between. I know my sagola is 10.5 and this gun uses way less.
@@GarageNoise ok, thanks. I just need it to paint my bumpers and other parts but I’ll be doing them separately.
Whats the point on purchasing a spray like that if you still need a big compresor ?
I have the aeropro r500 (black version of this one) and have only used it a few times and it is now leaking paint from the trigger area, any idea what could cause this?
Check the nut the needle slides thru in front of the trigger
Great vid. Its getting cold here about 50f. Would you warm the lacquer? If so to what temp. Thanks
Hola tengo un compresor de 24 litros y quiero comprar una pistola para pintar una puerta de coche que me aconsejas entre la r500 o la a610 y que consume las dos en cfm gracias
What matters is the cfm production or l/m you want at minimum 6 cfm of air out of your compressor. Yes this gun has the lowest air consumption of any full size gun that I've found.
I have a 2000 civic w factory single stage silver, body is straight, can I sand and paint over with reg solvent based base coat clear coat? Or do I have to prime entire car, if so w what?
If the paint is in good condition and not peeling you should be able to sand with 600 and base/ clear without primer. You may want to seal it before applying base for a good ground coat.
Set clear can in warm water
Love the videos. I have an a610with the harbor freight cup system (spectrum I believe), when I sprayed base with 1.3 tip it seems to surge. Sprays good for a bit then light for a split second and then continued to spray good. What could cause this, should I be using larger than 1.3 tip maybe? Any thoughts?
Do you have enough air pressure from you compressor?
It’s a 30 gallon husky. I’m not very experienced with setting up the spray gun. Not the ideal compressor but, I am wondering if it makes a difference if you use a regular cup with the small vent on the cap, versus the pps system that doesn’t have the vented cap?
@@chrispete9355 the cup shouldn't make a difference. The 1.3 tip is fine. I would clean the cap, any dries paint in the air cap will effect a gun like this. Hold it up to the light make sure its really clean.
Hi. Great job. you think that gun would work with my 550 Watts 30 litters compressor? 😅
🤣
D1 a nicer gun?
Given they're the same.
Which would buy?
Which ever ones cheaper. I perfer the color of the D1 but that's just a personal preference.
That gun looks good, but any gun looks good in your hand, so hard to say 🙂
But how does it compare to a R500 ? any noticeable difference, any good reason to switch ?
Anyway, could not find this gun on amazon europe, so it would not even be an option 😞
I was wondering the same. How does it compare to the r500?
Literally the same gun spray the exact same.
Have you tried switching the air cap from r500 to aeropro or this gun? Other you-tuber says it gives you a wider spray pattern and better atomization. Thanks for video!
I have swtched the air cap it was a bit different I honestly can't say it was a lager spray pattern. Maybe I'll check that out.
Oh the camera frame rate is in sync with your lights..
Yeah, I've corrected it now.
Whats the point on purchasing a spray gun like that if you still need a big compresor ?
What percent of isopropyl alcohol do you use in your sprayer?
70%
if i just want to paint panel by panel, will a 6 gallon compressor be sufficient?
You need 4-6 cfm more like a 30 gallon compressor
Chris, what in y out opinion are the pros and cons of a single stage paint system vs, a 2 stage system?
Thanks for any guidance you might share.
Randy
Single stage is like spraying clear, it runs easily if you not careful, wet sanding and buffing can effect color if it's metallic, so it's not as forgiving. It may be a bit cheaper and it's one less step but it's also not as durable. I would use bc/cc it's all around better. Hope this helps! Appreciate the comment and support!
Hello teacher, how much thinner do you put in 2k paint? 200 paint, 100 hardener, 100 thinner?
I mix 2parts paint 1 part hardener and 10per thinner
No hardner in the base coat I use, just paint and reducer 2:1
@@davidhempsall2542 You meant to say "I put 10% thinner"
Could you please provide the link to buy that gun
amzn.to/43xpc6d
6CFM at what pressure?
Base coat about 20psi, clearcoat I like between 28 and 30psi
thank you @@GarageNoise
My 5.7 cfm fad compressor at 30 psi won’t keep up with this gun
What’s fad? How big is your compressor?
Free air delivery, what you actually get at the gun. My little compressor is a Hyundai 50 ltr silent.
@@cynt1111are you spraying large panels or doing small sections?
@@joaquin0023 In general just a couple of panels occasionally the side of a car. Would estimate this gun at 8-9 cfm.
@@cynt1111I asked the seller to confirm the air consumption and they said 300L/min which is over 10 cfm. I only need it to paint a bumper but I have a small compressor which only does like 3.7 cfm at 40 psi. The description says 3 cfm and 30 psi but I doubt it.
R500 and A610. Same gun. No one talks about the leaking problems these have. Also the spray pattern on A610 is not as gr8 as the r500.just saying
I don't know some people have had some machining issues a few have mentioned a leak. I have 4 of these gun and haven't experienced either one. I would say there could be some issues it is a inexpensive gun. I think there is a slight difference in the R500 and the a610 .
CFM = cubic FEET per minute. It's already plural. Would you say Feets? No. So don't say CFMs.
👍
@GarageNoise can i get this gun in the uk
No, but I also wouldn't capitalize the word "feets" in the sentence "Would you say feets?" so I guess we all make a little error here and there.
Id be surprised if the harbor freight 20 gallon compressor is pushing 6cfm..some of their compressors have larger tanks but with weak motors
Your right most are around 4-5 picked one up this weekend to make some content with the one I got is 4.5
I sprayed son furniture with it and a lvlp and it did surprisingly well. Content on that coming soon.
@GarageNoise kool..I used a harbor freight 20 gallon compressor that wasnt mine to paint some cabinet doors a few yrs ago with the sprayit 33000, compressor kept up no problem tho it ran constantly
Looks like u didnt spray sealer over primer etc. Do u typically paint right over primer and thats good to go, maybe an extra coat of base takes care of any transparency
Being in a open garage I try not to use sealer with the exception of bumper and break thrus into filler. If the primer is uniform and sanded correctly you don't always need sealer.
@GarageNoise ok thanks, thanks for the reply..im going to be painting my black 2001 mustang hopefully soon, I've fixed couple small dents here n there..since I'm re painting it black I thought maybe black primer would help over the body filled spots to not show thru..ill be painting outside unfortunately, my garage is filled up with motorcycles n carpentry tools LOL