There used to be a time when everyone was uploading here clips with just because of passion. Never seem anyone to respond to everybody in comment section and with such phrases , you are one of those who wanna live of youtube.
Wowowow thank you so much man! I’m so honored that you can see that in me! I always try my best to be helpful & inspirational! Thank you for taking time out your day to watch my video & leave this great comment! Hope all is well! Take care! 🙏🏽
Learn from others experience as it is much cheaper! Example you have multi strand power wire that you tighten Allen screw buy the multi-strand wire will not stay tight you could either tin wire or use ferrule on the end of wire before clamping down in the fuse holder. Look at why all starter use star washer because they want a good connection sometime ground have star washer built in to provide a good ground. As journey mechanic for over 30 years I had to solve a lot of problems and instructor when an students get attitude they will eventually butt heads on problems that other may have the answers but is too stubborn to listen that when they have a taste of humble pie.
Thanks for this! Saved me so much money. I got a rav4 5th gen they’re uses the same head unit. Your LOC did not need a constant 12 v power I noticed. Where do you get that harness?
Know you pinned, old video, you mentioned in another (re: fuse placement) … Not asking you to rewire it, but suggesting buying and adding a second fuse next to the battery. This saves you from any issues with length (insert joke), gives you the protection against a short in the run, size appropriately for the load. I’ve done a lot of janky things installing stereo stuff in my cars in the 90s and this looks clean just for your safety if you haven’t get it done, I bet you could find a spot in the run of the wire where the risk of abrasion/wear is non-zero (no looms, plastic, rubber, electrical tape or otherwise) Keep ya head up and sharing your journey and experience with us
MY SOUND SYSTEM THE FUSE IS BY THE BATTERY ALSO BUT I GOT A DIFF TYPE. ONE THAT YOU RESET WHEN TRIGGERED LIKE A CIRCUIT BREAKER. JUST LEAVE THAT ONE THERE AND ADD THE OTHER
Bro you should put the fuse by the battery not in the boot. If it archs anywhere in the car you will have a live wire burning with no fuse to blow. Nice vid bro thanks 🤙🏾
Great video. If you can, I would redo your Fuse location, it should be as close to the battery as possible because all the wire between the battery and the fuse is unprotected and can burn up. I actually had a fire like that happen on my 70 camaro in the garage and I was lucky i had the hood up and was able to cut the cable.
You should use ferrule on multi strand power and ground wires and fuse should be as closest to battery in the engine bay. If a live unfused 12v power wire shorts due to accident it will catch fire. You should check on the other side before drilling. Grommet with shield should be used on power wire as fires happens during accidents.
Exactly what I needed man, wanted a way to get a sub in without cutting or splicing Incase I ever need to go back to stock. Awesome video as always keep it up!
Number 1 rule in car audio installs, you're supposed to put the fuse close to the battery so you can protect the cable from shorting out. The way you did it, the cable can get pinched in the firewall or under the carpeting and start a fire.
You’ll want some sound deadening to get rid of unwanted rattles and better output. Kilmat is what I used on my corolla. No rattles in a 1500 rms watt system.
Use a star washer when grounding wire, use ratchet crimped as bad crimp will come undone during accidents and arcing live 12v is short to ground equals 🔥 FIRE.
I'm sure most have commented on the fuse being w/in 12" of the battery, not from the sub...but at least you have a fuse...the only downside is the over-current can travel the length of the power wire before the fuse blows...adding a 2nd fuse closer to the battery is an easy addition....overall, installation looks nice...sloppy, but nice. Next project; raised hatch floor to get rid of the wobble...
Thank you man! 🙏🏽🙏🏽🙏🏽 I do think a newbie can install this no problem! Just be patient & you will be proud of your work! 🔥 & honestly it took me like 3 hours Bc I like to record my videos with time and effort! But if I wasn’t recording and follow steps off a video, I think this should take no longer then a hour!
It seems someone else noticed the 1st thing I did just and that’s to put the fuse as close to the supply or source (battery) as you can. The video has some good info and links tho so props there but yeah…. The last thing you want is a live cable from a solid power running around and ready to spark or start welding because it was run under the car or through a firewall or trunk floor and there was no rubber grommet used or the insulation deteriorated or heaven forbid your involved in an accident or forced to drive over something that fell off a vehicle in front of you on the interstate that bounces up n Pierce’s the wire shielding. Just saying Thanks for informative watch tho n peace
I’ve seen this harness but did not want to buy it due to the fact that it said non-JBL. Thank you for verifying fitment. I do not believe they make a JBL harness. I will buy this for my 2020 Corolla sedan XSE with JBL. Thank you. Nice video.
I have a 2019 xse hatch with jbl system and finding a harness has been a issue . Did this connection work even though it state it only works with OEM system ? Thanks and awesome video
Thanks for this vid bro, I have been putting off a sub since I replaced and amped my door and dash speakers (tough for a first-timer) I am running a 400W 4-channel amp that has a sub out so all the wire work is not too. Bad. I think I might try the shallow variant of the Cerwin Vega spare tire sub to keep the floor flush in the hatch. Might just need to finally do some sound treating, my front door woofers are already rattling the car as is lol but love how everything has been plug and play, barely any cutting necessary to stock harnesses. Keep up the fire content!!!
How are the other JBL factory speakers? I see a lot of Corolla owners who are in to sound like us, at minimum, upgrade the dash 3.5s with the JBL 3020s. You feel the factory JBLs are sufficient, or change any? I'm looking at getting one of these soon, and adding that JBL tire sub like you did, and trying to see if any the JBL stocks needed upgrading too!
They’re okay, they definitely could be better! I would definitely recommend upgrading them! I haven’t gotten to it but when I do I’ll definitely make a video on it!
Hey Giovani! So I just did your exact same install on my 2022 XSE with JBL package. Used all the same parts and it works great!! The only weird thing I’m experiencing is that whenever I turn down my main stock radio volume, the subwoofer volume doesn’t seem to lower at all. Any ideas what I did wrong or what’s going on?
you did everything right! You would have to add an external amp to control both your sub and main volume. That’s why there’s a remote to lower the sub!
I will use some of the steps to install a DSP and amplify the signal to all speakers and tweeters and even add a sub. It will sound greater than great. These cars have a weak (in terms of power) sound system
So the sub is higher with the hatch panel cover??? Do you think the sub would be perfect with cover and without the spare tire in place thus not having it play around...I don't like how it was showing uneven levels but still mad props!!! The normal radio adapter fits the JBLs 🙌🙌🙌
@@NobleONE17 It's kinda similarly to how subs sound better when they face the back of the trunk, because they utilize the back of the trunk to bounce the sound waves back into the car. ruclips.net/video/Q25syXC5yhE/видео.html
Why not just using the speaker -> high level inputs? No remote trigger cable needed (auto sensing), no line level converters, that's what I intend to do.
The fuse should be within 6 inches of the front. If it shorts, it's going to melt all the way from the front to the back. High probability that it melts your carpet.
Just did the same install as you. Except for me the volume up and down does not work. Sub stays at one level at all times. How did you get around this?
Well I couldn’t find a hole that went through except for the one in the wheel well. I didn’t have a jack or a jack stand to take off my wheel. So I decided to just make my own entry point!
@@GeovanisGarage So you don't necessarily have to drill it out? If you're not drilling it out, what would be the wiring path instead? Also, where do you plug in the red wire when it's in the engine bay?
You can do it through the fender liner! But that means you have to jack the vehicle up, remove fender liner and snake it in that way! Not hard just a little more work lol & that red wire goes from the positive battery terminal to the power on the jbl!
Hey man.. im in the uk.. seen all your vids 👍🏻👍🏻👍🏻 im looking for a wiring harness.. i cant find one available anywhere... any pointers to where i can get one? Thanks
Did you use the same AWG (10) as JBL included in connector or did use thicker? (Ground, power)? Can I combine a thicker with a thinner wire >ground power
Do you happen to know if the connectors are going to work for the 22 toyota camry? I asume since the infotainment system is similar, it should work but I'd rather ask to be sure.
I've read a lot of reviews and I'm getting ready to do this same installation on my car when it arrives and I was wondering if you lose sound on your rear or front speakers cause the reviews says that this adapter only taps the 2 front speakers and I was wondering if using this adapter can you still use the buttons on the steering wheel or you also lose that? Regards.
I've noticed that my speakers can't blast because all the sound comes mixed I was wondering if you now how to add a 2nd amp just for the speakers using the same adapter you have on the video from the head unit how the process would be ?;@@GeovanisGarage
I have a 2017 Toyota Corolla IM and have been looking for a good bass option… found post on scionform about a custom fiberglass box to contour the back on one side that I thought I might try to build but this looks nice…. What radio do you have? Since I got the older model car I don’t have Apple CarPlay and I want that! Maybe that one might fit my IM? But it’s in the dash so can only be certain size.
I’m not sure the specific radio that I have but I know it’s the same as the Tacoma & Camry I believe (the newest gen) & I’m sure there’s an adapter for the iM but you just would have to look for it! This is a great alternative to space save!
Man, this is a fire waiting to happen. When I saw you start off, I assumed you had a trunk-mount battery. That fuse only protects the 1.5-feet of wire between IT, and the amp. Yikes, man.
Yes sir! RUclips for some reason doesn’t like CARID links so all you have to do is go to CARiDs website, put your vehicle, go under dash covers & select the “real carbon fiber” option
It’s actually carbon fiber! I got you the link! Make sure you choose if you have XSE or SE. There’s a difference! www.carid.com/2020-toyota-corolla-dash-kits/b-i-2d-dash-kit-1832408107.html?parentsubmodel[]=SUBMODEL|XSE
So with this subwoofer you just connect straight to the head unit and the battery? You don't need an AMP? Or since you have the Hatchback JBL it comes with an AMP?
Are you still able to fade speakers front to rear and left to right, especially with the fronts left and right after installing the adapter. I know they tap the fronts so just curious if that functionality is retained. Great video btw, already added the adapter to my cart just need to know that little detail before i check out the cart. Thanks!
@GeovanisGarage Sadly, I missed the boat as I recently bought my Corolla 2020. Is there a chance you'll be able to help me find the Wire harness Add-on to the head unit, as it's nowhere available. Thanks, mate! I'm using your channel for some mods!
Do you happen to know how I could upgrade the Nav system on my Hatchback XSE to show the Navigation in the screen and have the compass in the MID? Not sure what parts I would need to order
@@GeovanisGarage yeahh I saw in your vid that the back of yours has a different part number and some of the connectors on the back are different. I wish they sold that package where I live 😔
help me with mine bro 😭 also, i have the sedan version of the 2020 corolla XSE, also jbl package. do you know if the fitting of the sub is better on the sedan to where it will not wobble when you put everything back together?
Hey man just wanted to say I love the videos. I have a 2020 6MT and I appreciate the content. Does the sub come with a pre amp? I actually had the larger version of the JBL bass pro 12 with the pre amp sub and I got it uninstalled. I currently have an 8” DD Audio sub with a 1000watt Audison 6channel amp. It hits much harder than the bass pro and takes up only a little space in the trunk. Sound quality wise I would look into something like that with a DSP (digital signal processor) to really enhance the music quality.
Thank you so much man! Appreciate you so much for supporting the channel 🙏🏽🔥 yes it does! & really? That’s dope bro! 🔥 & this DSP thing, I’m gonna have look into it, I really want to upgrade my sound quality! Thank you for the advice! 🙏🏽
@@GeovanisGarage hey man i had a side question. Have you ever thought of getting a sun roof installed? I live in Portland and there is one good company that installs them and I’m thinking of adding one. They aren’t terribly expensive either. I looked online and saw not a single hatchback with a sunroof.
Dope car and great video bro...I'm sure it's pretty similar to install in 2022 Camry SE. I'm prob gonna get that sub and install using this video. The highs are good on base system, just need bass, it has like zero lol. Time to upgrade the daily haha
Hey man I’m watching this video 2022, I know little to nothing about audio but I forshure want to add a sub to my rolla to enhance the audio sust a bit but a huge question do you need an amp for this sub?
![2024's BEST SPARE TIRE SUBWOOFER FOR CAR AUDIO [TOP 7 Best Spare Wheel Subwoofers]](/img/1.gif)
There used to be a time when everyone was uploading here clips with just because of passion.
Never seem anyone to respond to everybody in comment section and with such phrases , you are one of those who wanna live of youtube.
Wowowow thank you so much man! I’m so honored that you can see that in me! I always try my best to be helpful & inspirational! Thank you for taking time out your day to watch my video & leave this great comment! Hope all is well! Take care! 🙏🏽
Learn from others experience as it is much cheaper! Example you have multi strand power wire that you tighten Allen screw buy the multi-strand wire will not stay tight you could either tin wire or use ferrule on the end of wire before clamping down in the fuse holder. Look at why all starter use star washer because they want a good connection sometime ground have star washer built in to provide a good ground. As journey mechanic for over 30 years I had to solve a lot of problems and instructor when an students get attitude they will eventually butt heads on problems that other may have the answers but is too stubborn to listen that when they have a taste of humble pie.
Thanks for this! Saved me so much money. I got a rav4 5th gen they’re uses the same head unit. Your LOC did not need a constant 12 v power I noticed. Where do you get that harness?
Put the fuse close as possible to battery to prevent fire.
What is that bro
Right next to the battery in the hood would be the best place for it.
Nah it's all good👍
bro put that hoe so damn far 🤣
@@juniorsierra7138 its the plastic thing that goes in between the wires
Know you pinned, old video, you mentioned in another (re: fuse placement) …
Not asking you to rewire it, but suggesting buying and adding a second fuse next to the battery.
This saves you from any issues with length (insert joke), gives you the protection against a short in the run, size appropriately for the load.
I’ve done a lot of janky things installing stereo stuff in my cars in the 90s and this looks clean just for your safety if you haven’t get it done, I bet you could find a spot in the run of the wire where the risk of abrasion/wear is non-zero (no looms, plastic, rubber, electrical tape or otherwise)
Keep ya head up and sharing your journey and experience with us
Just a heads up the fuse is supposed to be next to the battery and not the amp
That is correct
MY SOUND SYSTEM THE FUSE IS BY THE BATTERY ALSO BUT I GOT A DIFF TYPE. ONE THAT YOU RESET WHEN TRIGGERED LIKE A CIRCUIT BREAKER. JUST LEAVE THAT ONE THERE AND ADD THE OTHER
Bro you should put the fuse by the battery not in the boot. If it archs anywhere in the car you will have a live wire burning with no fuse to blow. Nice vid bro thanks 🤙🏾
Great video. If you can, I would redo your Fuse location, it should be as close to the battery as possible because all the wire between the battery and the fuse is unprotected and can burn up. I actually had a fire like that happen on my 70 camaro in the garage and I was lucky i had the hood up and was able to cut the cable.
You should use ferrule on multi strand power and ground wires and fuse should be as closest to battery in the engine bay. If a live unfused 12v power wire shorts due to accident it will catch fire. You should check on the other side before drilling. Grommet with shield should be used on power wire as fires happens during accidents.
Can 2 fuses be a good option? One on each side?
That is how to not install a spare wheel sub
@@surreshkno use 1. As close to battery terminal. Don’t do anything else.
Exactly what I needed man, wanted a way to get a sub in without cutting or splicing Incase I ever need to go back to stock. Awesome video as always keep it up!
Thank you bro! Appreciate you watching the videos 🙏🏽
Number 1 rule in car audio installs, you're supposed to put the fuse close to the battery so you can protect the cable from shorting out. The way you did it, the cable can get pinched in the firewall or under the carpeting and start a fire.
You’ll want some sound deadening to get rid of unwanted rattles and better output. Kilmat is what I used on my corolla. No rattles in a 1500 rms watt system.
I like how one can save boot space 💯 but dude your infotainment is out of this world. On point and i love it
Thank you for watching! Appreciate the support 🙏🏽🙏🏽🙏🏽
My mans makes it look so easy
Use a star washer when grounding wire, use ratchet crimped as bad crimp will come undone during accidents and arcing live 12v is short to ground equals 🔥 FIRE.
I'm sure most have commented on the fuse being w/in 12" of the battery, not from the sub...but at least you have a fuse...the only downside is the over-current can travel the length of the power wire before the fuse blows...adding a 2nd fuse closer to the battery is an easy addition....overall, installation looks nice...sloppy, but nice. Next project; raised hatch floor to get rid of the wobble...
Great instructions! Do you think a newbie can do this and how long did it take for you to install this? Thank you!
Thank you man! 🙏🏽🙏🏽🙏🏽 I do think a newbie can install this no problem! Just be patient & you will be proud of your work! 🔥 & honestly it took me like 3 hours Bc I like to record my videos with time and effort! But if I wasn’t recording and follow steps off a video, I think this should take no longer then a hour!
It seems someone else noticed the 1st thing I did just and that’s to put the fuse as close to the supply or source (battery) as you can.
The video has some good info and links tho so props there but yeah….
The last thing you want is a live cable from a solid power running around and ready to spark or start welding because it was run under the car or through a firewall or trunk floor and there was no rubber grommet used or the insulation deteriorated or heaven forbid your involved in an accident or forced to drive over something that fell off a vehicle in front of you on the interstate that bounces up n Pierce’s the wire shielding.
Just saying
Thanks for informative watch tho n peace
I’ve seen this harness but did not want to buy it due to the fact that it said non-JBL. Thank you for verifying fitment. I do not believe they make a JBL harness. I will buy this for my 2020 Corolla sedan XSE with JBL. Thank you. Nice video.
I have a 2019 xse hatch with jbl system and finding a harness has been a issue . Did this connection work even though it state it only works with OEM system ? Thanks and awesome video
Works with OEM system like a charm! Works on all models for the corolla hatch!
Thanks for this vid bro, I have been putting off a sub since I replaced and amped my door and dash speakers (tough for a first-timer)
I am running a 400W 4-channel amp that has a sub out so all the wire work is not too. Bad. I think I might try the shallow variant of the Cerwin Vega spare tire sub to keep the floor flush in the hatch.
Might just need to finally do some sound treating, my front door woofers are already rattling the car as is lol but love how everything has been plug and play, barely any cutting necessary to stock harnesses. Keep up the fire content!!!
That’s wassup bro! 🔥 thank you for watching bro! I appreciate you 🙌🏽🔥
I have aquestion bro, so basically you added a 2nd subwoofer to the one your JBL equipped Corolla had already right?
Excellent review, bass pro shop logo made me chuckle, congrats on your channels style, look forward to more
Thank you bro! 🙏🏽
How does red battery grounding wire get to the battery once you’ve drilled through the fire wall? Behind the stereo? Under the steering wheel?
Awesome video. good explanation. Is the sub giving independent out even if the amplifier audio is all the way to zero?
Thank you Gino! 🙏🏽 & correct!
Thanks for this video my dude, wifey bought a SE night edition today and looking for some accessories to add!
Thanks for watching and supporting the channel 🙌🏽
How are the other JBL factory speakers? I see a lot of Corolla owners who are in to sound like us, at minimum, upgrade the dash 3.5s with the JBL 3020s. You feel the factory JBLs are sufficient, or change any? I'm looking at getting one of these soon, and adding that JBL tire sub like you did, and trying to see if any the JBL stocks needed upgrading too!
They’re okay, they definitely could be better! I would definitely recommend upgrading them! I haven’t gotten to it but when I do I’ll definitely make a video on it!
Try hertz speakers, cento line or mille.I have cento and they are great. JBL BassPro Hub in the spare tire.
Hey Giovani! So I just did your exact same install on my 2022 XSE with JBL package. Used all the same parts and it works great!! The only weird thing I’m experiencing is that whenever I turn down my main stock radio volume, the subwoofer volume doesn’t seem to lower at all. Any ideas what I did wrong or what’s going on?
you did everything right! You would have to add an external amp to control both your sub and main volume. That’s why there’s a remote to lower the sub!
Try to mess with the integrated equalizer on the screen pretty sure you can reduce the bass in those settings
I noticed that the foam surrounding the spare tire donut was removed in the end. Why did you do this?
I will use some of the steps to install a DSP and amplify the signal to all speakers and tweeters and even add a sub. It will sound greater than great. These cars have a weak (in terms of power) sound system
So the sub is higher with the hatch panel cover??? Do you think the sub would be perfect with cover and without the spare tire in place thus not having it play around...I don't like how it was showing uneven levels but still mad props!!! The normal radio adapter fits the JBLs 🙌🙌🙌
Yeah if you take out the spare you wouldn’t have that wobble! Thank you bro! Appreciate it 🙏🏽
The spare tire may actually be needed to help the sound of the woofer travel upward and into the car.
So not having the spare tire to improve sound direction effects the Sub...
Damn😞😞😞
What do you say Gio?, another vid to show the difference???
@@NobleONE17 there is other videos where they show the difference.
@@NobleONE17 It's kinda similarly to how subs sound better when they face the back of the trunk, because they utilize the back of the trunk to bounce the sound waves back into the car. ruclips.net/video/Q25syXC5yhE/видео.html
Ayee let’s go!!! The sub makes a huge difference. 🥵🥵
Yes it does! 😍🔥
Your sub sounds GREAT !!! It doesn’t do rattles or anything very clean sound
Dlaczego nie pociągnąłeś zasilania z gniazda zapalniczki w bagażniku? Myślę, że to było byl lepsze niż wiercenie dziury w karoserii.
Why not just using the speaker -> high level inputs? No remote trigger cable needed (auto sensing), no line level converters, that's what I intend to do.
How do u have a JBL Headunit
It’s an option when you buy the car!
The fuse should be within 6 inches of the front. If it shorts, it's going to melt all the way from the front to the back. High probability that it melts your carpet.
Just did the same install as you. Except for me the volume up and down does not work. Sub stays at one level at all times. How did you get around this?
Hmmm that did not happen to me, I wonder what that is, have you looked that everything is secured tightly? Like all connections?
Hallo is it possible to use the subwofer without the remote in the cabin? Or you have to always ajust the bass?
Just a quick question. Why did you opt to drill a hole through the car rather than going through the fire wall ?
Well I couldn’t find a hole that went through except for the one in the wheel well. I didn’t have a jack or a jack stand to take off my wheel. So I decided to just make my own entry point!
@@GeovanisGarage So you don't necessarily have to drill it out? If you're not drilling it out, what would be the wiring path instead? Also, where do you plug in the red wire when it's in the engine bay?
You can do it through the fender liner! But that means you have to jack the vehicle up, remove fender liner and snake it in that way! Not hard just a little more work lol & that red wire goes from the positive battery terminal to the power on the jbl!
That shit 🔥. Literally, as soon as that wire chafes 😂
Do you think a 16ft RCA would be long enough? Having decent cable management is a big OCD I've got.
Yes I believe you’ll be fine! 🙌🏽
Hey man.. im in the uk.. seen all your vids 👍🏻👍🏻👍🏻 im looking for a wiring harness.. i cant find one available anywhere... any pointers to where i can get one? Thanks
Did you use the same AWG (10) as JBL included in connector or did use thicker? (Ground, power)? Can I combine a thicker with a thinner wire >ground power
Do you happen to know if the connectors are going to work for the 22 toyota camry? I asume since the infotainment system is similar, it should work but I'd rather ask to be sure.
Hey Geovani, Where did you get the adapter that plugs into the head unit for the rca to plug into? Thanks
Amazon! All links are in description boss 🙏🏽
I've read a lot of reviews and I'm getting ready to do this same installation on my car when it arrives and I was wondering if you lose sound on your rear or front speakers cause the reviews says that this adapter only taps the 2 front speakers and I was wondering if using this adapter can you still use the buttons on the steering wheel or you also lose that? Regards.
Nothing is changed! Everything works the same for me! Just get that added bass!🔥
I've noticed that my speakers can't blast because all the sound comes mixed I was wondering if you now how to add a 2nd amp just for the speakers using the same adapter you have on the video from the head unit how the process would be ?;@@GeovanisGarage
I have a 2017 Toyota Corolla IM and have been looking for a good bass option… found post on scionform about a custom fiberglass box to contour the back on one side that I thought I might try to build but this looks nice…. What radio do you have? Since I got the older model car I don’t have Apple CarPlay and I want that! Maybe that one might fit my IM? But it’s in the dash so can only be certain size.
I’m not sure the specific radio that I have but I know it’s the same as the Tacoma & Camry I believe (the newest gen) & I’m sure there’s an adapter for the iM but you just would have to look for it! This is a great alternative to space save!
Can you tell me what wheels are you running on your car I like them do they come 4X100😊
Here you go boss! 🙏🏽
ruclips.net/video/5I0jTK3pTEk/видео.html
Man, this is a fire waiting to happen. When I saw you start off, I assumed you had a trunk-mount battery.
That fuse only protects the 1.5-feet of wire between IT, and the amp.
Yikes, man.
Would you mind! giving out the links for your carbon fiber interior covers?
Yes sir! RUclips for some reason doesn’t like CARID links so all you have to do is go to CARiDs website, put your vehicle, go under dash covers & select the “real carbon fiber” option
Thank you im a friend of kori e210 in instagram thats and i talked to trizzy thats why i know you haha thanks man!
Ay those two guys are legendary! They both have the cleanest car in their color! 🔥 tell them I said Hi 🤣🔥
Good video, Put the fuse close to the battery fire hazard.
You wrap it all in carbon or these are actual parts? Link for either one lol 💪
It’s actually carbon fiber! I got you the link! Make sure you choose if you have XSE or SE. There’s a difference!
www.carid.com/2020-toyota-corolla-dash-kits/b-i-2d-dash-kit-1832408107.html?parentsubmodel[]=SUBMODEL|XSE
I’ve done my headliner, but for some reason I’m kind of scared to do this
It’s EZ! Plug and play!
Jbl bass pro is more powerful in terms of bass or bass pro hub ?
So with this subwoofer you just connect straight to the head unit and the battery? You don't need an AMP? Or since you have the Hatchback JBL it comes with an AMP?
Straight plug and play bro! & the sub has a built in amp!
@@GeovanisGarage also I know this taps on front speakers do you lose sound on the rear doors speakers?
It taps into the head unit, not the speakers! You don’t lose any sound quality.
Bro where did you get your floor mats
Got them from F1 mats! Here’s a link to them!
ruclips.net/video/5cAVw9BOyQY/видео.html
There’s a discount in the description!
How much Ampere is that fuse? I think mijn is to much because the subwoofer won’t go on and everything is connected like should..
Team no fuse yolo!
Good work man!
Would that RCA harness work with a 2024 camry SE non jbl
Does this include an amp inside as well?
Are you still able to fade speakers front to rear and left to right, especially with the fronts left and right after installing the adapter. I know they tap the fronts so just curious if that functionality is retained. Great video btw, already added the adapter to my cart just need to know that little detail before i check out the cart. Thanks!
Yes you are bro! 🔥 no need to worry about anything at all!
Darf man fragen woher du die kabel fürs Radio hast ?
Where did you get the carbon trim for the radio display?
Love this ! Gonna do this on my Corolla right after I install my component speakers
Lessss goooo 😤😤🔥🔥🔥
Component speakers? Can you maybe upload a vid so I can see pls :)?
If I ever get that… of course!!!
did you ever do anything to fix the wobbling trunk lid? if u did what did u do to fix it
I never fixed it Bc it’s not bad, it doesn’t rattle so I just left it as is!
Great video
(Edit: I hadn't seen the link you posted, so nvm.. thx.)
Thanks bro! Seriously appreciate you! 🙌🏽🙌🏽🙌🏽
would this be a nice compliment to 2 other subs.
The day you need your spare tire will be a good day.
Whoa I've never seen a sub like that! Is it difficult to remove the spare tire?
Yeah right? Super convenient & space saving! 🔥 it’s super easy to remove the spare! Just disconnect the sub & you’re good to go!
@@GeovanisGarage I agree man, way better than a bulky box
should you plug it into an amp knowing that it already has
The subwoofer Phase button for 0 or 180 degree is not working.. I mean it's not giving any effect after pressing it.. W
Good evening, what is the model of the rca converter and is it used to connect to a Camry 2022 stereo?
Not sure on the model but i have the link in the description. I’m not sure if it fits a camry
Omg this sounds amazing I need it!
Dude so worth it!!! 🙌🏽🔥
@GeovanisGarage Sadly, I missed the boat as I recently bought my Corolla 2020. Is there a chance you'll be able to help me find the Wire harness Add-on to the head unit, as it's nowhere available. Thanks, mate! I'm using your channel for some mods!
Did you by any chance figure out if that head unit wiring harness works on both jbl and non jbl audio cars?
Check out @ 18:12 , I hope I made it clear but it work for both 😭🙏🏽
What size bolt did you buy to fit at the end?
Do we need a separate amplifier for this Basspro Hub to work?
No sir! Plug and play!
Do you happen to know how I could upgrade the Nav system on my Hatchback XSE to show the Navigation in the screen and have the compass in the MID? Not sure what parts I would need to order
I don’t have the XSE Preferred Package like yours does
I don’t think you can upgrade. It’s a whole different ECU setup! Unfortunately you can swap it over.
@@GeovanisGarage yeahh I saw in your vid that the back of yours has a different part number and some of the connectors on the back are different. I wish they sold that package where I live 😔
What year is your Corolla ? I just ordered the sub and wondering if the amp adapter will work on my 2021 Hatch.
2020! Works through 2019 -2022
@@GeovanisGarage Did you keep the factory speakers or replaced them as well?
I kept them!
help me with mine bro 😭 also, i have the sedan version of the 2020 corolla XSE, also jbl package. do you know if the fitting of the sub is better on the sedan to where it will not wobble when you put everything back together?
It’s the same exact fitment bro!!! You got this 😮💨😮💨😮💨🔥🔥🔥
@@GeovanisGarage thank you!!
Where can I find the rca adapter harness
How do I remove the trim from the sides to run my wires?
Hey man just wanted to say I love the videos. I have a 2020 6MT and I appreciate the content.
Does the sub come with a pre amp? I actually had the larger version of the JBL bass pro 12 with the pre amp sub and I got it uninstalled. I currently have an 8” DD Audio sub with a 1000watt Audison 6channel amp. It hits much harder than the bass pro and takes up only a little space in the trunk.
Sound quality wise I would look into something like that with a DSP (digital signal processor) to really enhance the music quality.
Thank you so much man! Appreciate you so much for supporting the channel 🙏🏽🔥 yes it does! & really? That’s dope bro! 🔥 & this DSP thing, I’m gonna have look into it, I really want to upgrade my sound quality! Thank you for the advice! 🙏🏽
@@GeovanisGarage hey man i had a side question. Have you ever thought of getting a sun roof installed? I live in Portland and there is one good company that installs them and I’m thinking of adding one. They aren’t terribly expensive either. I looked online and saw not a single hatchback with a sunroof.
No never thought of it! Definitely now on my list!
Could I get signal from a rear speaker to the RCAs? I don't have aftermarket radio.
If it has a plug-in, i think it should work!
Hey. The fuse is going in the front of the car near the battery. Not at the sub.
Hi guys. Could you help me finding that amplifier? The link doesnt work.
this works fine with the jbl audio upgrade ?
Yessir!
Can you get the jbl system that already came with your car separately?
I’m not sure! I’m pretty sure you can’t!
Dope car and great video bro...I'm sure it's pretty similar to install in 2022 Camry SE. I'm prob gonna get that sub and install using this video. The highs are good on base system, just need bass, it has like zero lol. Time to upgrade the daily haha
Thank you bro 🙌🏽🔥
Can i use power from trunk cigarette outlet 12V ?
Not sure 😭
So want to do this after getting new prius. Or on my now prius 3rd gn.
Did you wrap the steering wheel?
No sir! It is a carbon fiber wheel!
will everything work with the 2023 hatch with jbl?
Great Video! :-)
Have you got a Amazon link for the High-Low-Adapter for me? Thank you!
Yes it’s the description! & thank you for watching 🙏🏽
@@GeovanisGarage I looked in description before, I couldn't find it ... I'm going to look again
@@GeovanisGarage thanks...yet I found it! :-)
Hey man I’m watching this video 2022, I know little to nothing about audio but I forshure want to add a sub to my rolla to enhance the audio sust a bit but a huge question do you need an amp for this sub?
No you do not! Follow this video step by step! Just put the fuse close to the battery terminal! I messed up and put it by the sub!
Cant seem to buy the wire harness add on, another suggestions? I have a corrola 2021
Just checked the link and they still have some! Check the link in the description!
Heyyy no, it says currently out of stock
It says 12 left in stock when I click the link!
www.amazon.com/gp/product/B087Z1794K/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=asvpgeovani10-20&creative=9325&linkCode=as2&creativeASIN=B087Z1794K&linkId=dfdf8422be24fb504156aca054d40b46
That’s a very nice car no way I personally am going use that boss fuse holder. 4gu ofc wire with anl crimped lugs with anl fuse.
Thank you for watching the video bro 🙏🏽
Who makes the harness or do you have a link?
It’s on Amazon! Link is in the description!
Where did you buy this plug and play connectors?
Amazon! Check the links in the description!
@@GeovanisGaragethx
It sounds good?
Sounds amazing!
Where did you get all the carbon accents for your dash?
I got them from CARID!