Inside, outside....redo either-your choice; we'll be watching regardless! I enjoyed spending NYE here with you, Derek! I hope 2022 is a blessed year for you and your precious family!!! Fun video!!!
Dr, Lee, I love that you enjoy watching VGG as I also do. My oldest son just hired on as a project manager at Bunker Branding. I'm very proud of him and his family. I thought I'd be living in Boerne by now, but it looks like I'm a few years away still because, well, life. Happy new year to you and yours, Derek and family, and all of the VGG fans as well! Be safe!
Totally agree. When Bentley is all grown up you know for a fact that he will remember all of these times with his dad. Good times! Derek has a beautiful family and I love watching them all work together with dad. Fred
Without gettin into a guy’s emotional trauma I just want to say how great it is that you include the family in all of this. My dad was not a great guy like you
My dad used to always maneuver his 1979 Ford pick up around the woods next to our house, mainly along the trails when I was 11. Made amazing memories. He even baby'd the bumper against a tree and threw it into drive and pushed it over. Ruined the power steering but it was worth it
I'd vote for cleaning the outside. That's what folks see first. Then clean the interior. Just my 2 cents!!! Happy New Year to you and the family Derek! Cheers brother!!!!!
Once again, I have to tip my hat to the man with nerves of steel. Give the outside a quick kiss to clean it up. Then steam wash the engine. Then move on to the interior. And lastly, but certainly not least, be thankful for Bentley. He’s such a great young man, and it’s obvious he loves being with you on all of your crazy adventures! Wishing you and your wonderful family a Happy, Healthy & Successful New Year
Vice i am truck driver,i watch you videos every day when i stop and i am adicted to your chanel,a big support and a lot of gretings from Germany,thank you a lot!!!
Derek I think it is so nice you are thinking of others in that not everyone can just throw thirty thousand at a truck to restore it. Appreciate you seeing how good you can make it reasonably!!!!
Well a guy has his vote in for a good ol’ pressure washing and detailing video first and a guy could walk us through the order list for fixing up the interior and while that’s on order put the shine on the outside. Just my nickel’s worth of thought. Great video as always, keep it up!
You look too far down on the ol' thought machine up there. A guy might even give ya 20 fresh pennies and agree with it. Something like that at least. Honestly, would love to watch a full washing detailing video where he discusses the future of the interior for another video.
NEEDS to get rid of all the old mouse deaths and fugies and spores hanging around the fabric of that old seat. Paint can be done at any time, need to keep the little guys safe first
I would pressure wash the exterior and engine bay first,it’s satisfying and it doesn’t cost too much. The interior might be a few bucks depending on what you plan on doing to it. Happy New Year to you and your family!
Your son will live the blessing of getting to work with his dad on this truck (his truck) for the rest of his life. I'm looking forward seeing it come together.... like my old 41 and 59 did working with my dad.
I think shining on the ol’ rig would be a good next step. Make her look good going to town, and then do a little work on the inside. Absolutely love this truck and the content you’re creating!
My husband and I would both like to see an interior fix up…Maybe clean up the outside, but leave it as is paint wise. Looking forward to seeing what you decide to do!
Derek seems like a really down-to-earth guy. Those old 1970's-era Ford 6-cylinder engines are pretty sturdy and forgiving; they're more likely to vapor lock if they overheat. Just keep on top of the oil changes!
This is my favourite Channel! I love seeing the old metal saved from the scrapper. If a vehicle survives 40, 50 years it deserves to live on. Not just the rare muscle cars! Keep on Derek! Just my opinion I like to see them as stock as reasonably possible. Adding a larger rad is always a good idea!
😂 bruh .. I found myself doing the same changing the plugs on my barra, the back one is usually hard to get out and there’s usually a 10 year old plug of it’s stuck 99% of the time and this one was mint and came out easy 😂 and said to myself ‘well I’ll be dipped’ haha
I've been using that expression (I'll be dipped in s*it is the full version) since 1969 when a co-worker introduced me to it! Glad to see it's still in vogue!
I like your thoughts on keeping this a budget restore, just making it really nice without going crazy. Sometimes all a rig needs is some TLC to be nice.
Thank you for the constant entertainment. The next step in the "restoration" should be cleaning the paint, then go to the interior. Happy new year everyone!! I💪
Go for the exterior power wash, then spruce up the interior, including plugging the classic air venting around the floor. The fixes so far, are very satisfying. Love watching the rust-a-ration! Happy new year to Derek, Jess, and the boys!
I just gotta say, the content and the editing are both 5 stars in my book. Your channel is hands down the most endutaining one on the interwebs. Your wit and charm and vidja quality are the cat's meow! Sorry to hear from your face space page about all the lost content from the inferior quality digicals, dang! Most of all, the almost complete lack of profanity in an age where even the f word is commonly used is so appreciated. My wife and I absolutely love what you and Jessica and the boys, and even the occasional guest appearance of Brother Krang produce. It seems to be bringing you at least some level of properity. You deserve it. I hope the work is worth the reward. We wait with baited breath for each new vidja.
Totally agree with the lack of profanity in your show. My husband and I totally enjoy all your shows. Love your support from family and including them in your channel. Was worried about your health when you were driving the Rebel back from Florida. Glad you decided to call it quits and get alternative plans to get it home.
I love the father-son rides but you really should have a weather-tight travel box you can take with you containing oil, coolant, etc, and a few tools. You know the stuff you need.
My oldest son of 4 boys rode around with me in my 77 f250 when he was 3 and its been parked since. Hes now 18 and i think its time to get it back on the road so we can all enjoy it again. Thanks for the motivation.
I'm less than 2 min into the episode and am already so happy with the direction you chose. Budget rebuild... teach those who are looking to do their first rig about what's important and how you can get em back on the road for years to come. Love it.
If it was mine, I would concentrate on 2 areas: Spend some time underneath and replace bushings, seals, etc. Then when your confident there is no issues there, move to the interior a bit. Pull the seat, repair/replace wiring as needed, new floor mat, new seat or cover, general cleanup. Paint and exterior can wait, that is just cosmetic for the most part.
A guy had a 66 with a 300 straight 6 and that was my favorite ford truck of all time. love the twin I beam suspension. Also had a 74 with a 360, a 79 with a 400 and a 92 with a 300 6 cylinder. I personally prefer the body style of the 73 thru 79 fords, I would love to have that solid truck you are working on. That brings back a lot of memories
@@ViceGripGarage you can just call me guy. Lol I've been watching your stuff for a while and I've learned a bit from it. I hope your and lovely family have a wonderful New Year!
This morning I applied my youtube learning and assorted collection of tools to the task of replacing a windshield water reservoir pump. Thank you, Derek, for your share of that learning. While you haven't told me how to work on a 2004 model of anything, you have showed that a guy with some tools can do just about anything. It's an '04 Malibu I bought new for a daughter.
Having been snagged on the backside many times by shredded seat vinyl that has somehow turned into a steak knife, my vote is for an interior freshening.
Hey Derek! So glad to see Bentley going for a drive with you. Back when I was his age, shoot, all of my childhood and teens, I went with my dad every chance I could. My dad worked a lot. Never saw him through the week. He worked in a steel mill 3pm-11pm and worked for a contractor trimming houses 6am-2pm. Saturdays he built decks for people. So Sundays were really the only day I got to see my dad except for Saturday evenings and when I was old enough, I went with my dad to help him build decks. More like be in the way. HAHA. Lost my dad to cancer in 2017. What I wouldn't give for one more ride with him. The Harley in my picture was his. He bought it brand new. 2005 night train. It's mine now. My mom gave it to me for as my dad and I used to ride together. Have a great day! Oh yeah, I think you should do the exterior and then the interior.
I always make sure the mechanics are sound and move to the interior where you spend all of your time...the outside comes last. Seems like a solid truck...I have a 1973 High Boy 4X4 with a 390 4 speed...one of my favorite trucks.
Giving away my age here, but I remember that these trucks came with a “high output heater” option with a larger heater core. It was was a must have for us fellers here in Canada. Came with I nice chrome decal on the dash to let you know what you had. Probably not an option that people would go for on a Tennessee truck
@@boerde6202 Go watch some of South Main Auto's videos. You'll keel over looking at the kind of rust he has to work on. When your nuts look like popcorn you know your in the salt belt.
Like your garage cat “Motor”. Found your newest video an hour before the New Year. Nice way to bring in 2022 with you and your Son wrenching on the Ford. I say power wash the exterior. Thanks Derek for another adventure
I like the way you think. It doesn't need to be high dollar full on show truck just cleaned up and made a very solid rig to be on the road for another 40 years.
VGG has to be one of my most favorite and enjoyed youtube channels to watch, and I am subscribed to a LOT of different car channels. Great video Derek, cant wait to see what's in store for the rest of this rustoration!
As a dad to a 5-year-old son, this video makes me want to spend more time with him. Thank you for sharing your time with the kiddo. It's going to mean so much to him.
I love it that you decided to just restore what you have and not do a full blown restoration. I love your channel and how you work. Your channel is awesome and your videos are so comparable to what I do with my vehicles. Keep up the good work man. Happy new year
Just started watching this video, totally agree with a guys decision for budget restoration. Bring the thunder! Oh, and Happy New Year to you and your awesome family Derek. , hope it bring the best of everything you can hope for. Now, back to your video with a cold snack.
Great budget rebuild video Derek. I love how you have your kiddos helping you out. I think I would like an interior redoooo. But, but, but, a guy thinks you do what you doo. Thanks for the great content. 👍
You should have hand washed it in the rain it cuts the tree sap and grime pretty good just a trick my GRANDFATHER showed me poor man car wash!!! HAPPY NEW YEAR 💯🇺🇸🔥✌✌
@@travo5050 I had two 3/4 ton 73 model and 73 f100 short wide with a 6in a row not enough Hp to tow the 300 6 you had to stop and check the gas fill up on oil 🤣🤣wish I had half the old vehicles back that I just gave away basically 🤦♂️💯🇺🇸🔥✌✌
Rewatched this one this morning. Don’t know if you look at new comments on old videos but I gotta tell ya that videos like this one are your absolute best stuff IMO. Subtly and expertly combining entertainment with rock solid education/information. Sincerely, thanks for everything you do. More vidyas like this one please!!!
Nice to see the camera focus is “right on” in the new shop. The one thing that always bugged me in the old shop….camera focused on the background and not on Derek. My vote is to give the truck a nice bath, makes working on it so much more fun.
I’m an old GM guy, but, nothing compares to these old fords with the ride and the reliability of those old 300 straight sixes. I’ve had a lot of Chevy and GMC pickups, with a couple of Dodges for flavor, but my 77 F150 and 84 F150 are still favorites of mine. Just nice, simple, honest pickups that are a blast to drive and enjoy. Thank you for all your videos, always looking forward to your next rescue!
Absolutely loving this series. I am "restoring" my grandfather's 79 with the 6 in a row, and would love to see an interior overhaul. Dash, gauges, and the storm keeper outers.
I stumbled on your channel late Christmas eve, and I was hooked. You are quietly one of the funniest people Ive watched on youtube in a long time. And obvs a very very good mechanic. Ive watched several videos, and every one Im enthralled. Thanks for the hours of soothing phrases like 'Poverty Chrome'.
@Mike Hoskins totally agree, the comedy gets repetitive and predictable after a couple episodes, to the point I wish he'd drop the character totally as he's still interesting to listen to when being serious - but damn it's great watching the work and skills on show here.
our Guy is staying true to his channel’s mission (on a budget), but I’m very happy & proud that it’s shot in a new shop. It’s a great lesson in hard work, opportunity & being BadAss in general. Happy New Year, Bieris & the entire VGG Community. let’s all get it in 2022.
@@shawngrenaud - that’s what VGG success looks like to me: cars parked indoors under not-so-rusty cars, a shop cat, a handful of piston-powered rides for the boys…and flannel.
I like where a feller is going with this build. I would want to keep it a worker, daily drive able. Maybe a little internal refresh on the old 6. Maybe some light upgrades that will make her a tickle more peppy. Since you're aiming the finished product to potentially be a first vehicle for an offspring, a guy can't go too crazy with big blocks, sushi slicers, or laughing gas, but maybe a mild cam or better ability to inhale and exhale the go juice. I'm excited to see where you go with it and I respect your idea to make it where the average feller can put one like it on the street and head to town in it.
Brings back a lot of memories for me. I was two years old when my dad purchased a 1978 Ford 250. Big old 460 automatic. Spend a ton of years inside that truck on every adventure you can think of. Two tone metallic green supercab.
Really enjoyed this video on the old Ford. Reminds me of the time when we were teenagers working on our first vehicles. Getting it running good first, then interior and clean up exterior. No body or paint work, no money in the budget for that. Glad you're keeping looking like a survivor. Does not matter which direction you take first, just happy you are inspiring a new generation of young people.
I've read some of these comments and the VGG community is amazing. Incredibly supportive and very kind. I am so glad to be a part of this community and I can't wait to see what happens next with this truck. I hope 2022 is an amazing year for us all, and I wish you all the best. :)
This video has a slightly different flavor than the usual and it is very good! It’s really good to see progress on a simple vehicle and as usual you do a bang up job of explaining the reasoning and method for what you are doing! Amazes me on how you absolutely convince me in every video to pick up and save on another old vehicle by just showing love to the poor old rigs. I love the content and keep on reasonably rejuvenating on this truck! Keep cleaning up the parts that eyes can easily see !
Dad was a mechanic. Thanks for bringing back those happy memories of being a little feller helping Dad bleed brakes. Pump it up. Down. Up. How she feel?
Well I'll be dipped, we got ourselves a vidjea to ring the new year in with! Thanks brother, we appreciate all your hard work this year. We are proud of how far you have come in your journey! We are also SUPER excited to see what 2022 holds in store. God bless you and your family!
Vgg coming out clutch with an awsome new years eve video!!! Thanks Derek, hope you and the family have a great new year, 2021 was a great year for you, can't wait to see what 2022 brings!!
Also in TN and just picked up a 71 F100 Ranger as my first restoration. Thank you for this content - as I hardly know what I'm doing, it's taught me a lot!
A guy can see Mortske Repair rocking back and forth on the floor right now because of the flexi-hose install. I love it. Happy and best New Year to you fellas and fellet’s
My wife and I wait for these videos here in Yarmouth, Nova Scotia. It’s refreshing that you’ve kept the ‘realness’ of the channel. I’m more of a Chevy guy but all of these old vehicles are heads above what’s out there today. I hope you don’t have a blow by issue… you did make it back though and nice ice cube hose too, jerry rigging at it’s finest!
The heater core issue may be that Ford in pickup trucks and Broncos they offered high output and standard heaters, either core would work but one may be a high output heater core. Love your videos made me a big fan.
Time to clean it up, exterior/ engine bay clean up and then focus on the interior. I hope that my son grows up like bently, love seeing him in the videos and helping, getting into shenanigans. Love the videos brother happy new year!
Looks like you got a new addition to the garage... a Kitty!! He or Her will help keep those pesky meeces away! Great to see you back in the shop wrenching Derek, my vote is for that oh so satisfying pressure wash of the Exterior. A very happy new year to you and your family, and may God bless you with a safe, fun, and prosperous new year !
FORD First On Race Day!!! Hotrod 6 with a 3 on the tree Build. Nothing like driving an old simple honest basic pick-up!!!! What a beauty!! Thanks for all the great content!!!!.
I would probably move on to steering and suspension next. And then, if there's time, a bit of electrical normalization. But go with your gut! Thoroughly enjoying this!
Inside, outside....redo either-your choice; we'll be watching regardless! I enjoyed spending NYE here with you, Derek! I hope 2022 is a blessed year for you and your precious family!!! Fun video!!!
Happy New Year Lee and family
Happy new years Dr Lee from my family to yours @Out On The Ranch (With Dr. Lee)
A guy sure does love seeing Dr. Lee commenting on videos on one of his fav channels.
Dr, Lee, I love that you enjoy watching VGG as I also do. My oldest son just hired on as a project manager at Bunker Branding. I'm very proud of him and his family. I thought I'd be living in Boerne by now, but it looks like I'm a few years away still because, well, life. Happy new year to you and yours, Derek and family, and all of the VGG fans as well! Be safe!
Happy New Year's Derek
The happiness I felt for Derek during that back road Tennessee drive with his boy, in an awesome rig was just heart warming.
Totally agree. When Bentley is all grown up you know for a fact that he will remember all of these times with his dad. Good times! Derek has a beautiful family and I love watching them all work together with dad. Fred
seat belts?
Without gettin into a guy’s emotional trauma I just want to say how great it is that you include the family in all of this. My dad was not a great guy like you
But I bet you are a phenomenal Son. Happy New Year and God Bless.
Neither was mine...but l see they're out there.
Driving with your son, in an old pickup truck, down some back roads like that is priceless. Great memories for you both.
yeah, if only they put their seatbelts on...
@@coldfear19 don't ruin a beautiful moment.
My dad used to always maneuver his 1979 Ford pick up around the woods next to our house, mainly along the trails when I was 11. Made amazing memories. He even baby'd the bumper against a tree and threw it into drive and pushed it over. Ruined the power steering but it was worth it
Dent side Fords are some of the best looking trucks ever made.
I like the bump side too
I'd vote for cleaning the outside. That's what folks see first. Then clean the interior. Just my 2 cents!!! Happy New Year to you and the family Derek! Cheers brother!!!!!
Agree
Do the interior first,
clean up exterior
Congratulations, you win the "like lottery". lol
Powerwashing that dirt and moss off will make a satisfying video.
A guy can’t go to town in a rig he can’t afford. Thrifty and thorough. Perfect.
Kinda like buying a wallet with your last few dollars. Just doesn't make sense.
Derek you are the heart mechanic of vehicles
Hell yeah! I love seeing down-to-earth, realistic restorations. The kind of thing a guy could do in a modest garage.
Once again, I have to tip my hat to the man with nerves of steel. Give the outside a quick kiss to clean it up. Then steam wash the engine. Then move on to the interior. And lastly, but certainly not least, be thankful for Bentley. He’s such a great young man, and it’s obvious he loves being with you on all of your crazy adventures! Wishing you and your wonderful family a Happy, Healthy & Successful New Year
My vote is for finishing up everything in the engine bay and then doing the exterior. But whatever you chose will be good 👍🏻
Vice i am truck driver,i watch you videos every day when i stop and i am adicted to your chanel,a big support and a lot of gretings from Germany,thank you a lot!!!
Derek I think it is so nice you are thinking of others in that not everyone can just throw thirty thousand at a truck to restore it. Appreciate you seeing how good you can make it reasonably!!!!
Well a guy has his vote in for a good ol’ pressure washing and detailing video first and a guy could walk us through the order list for fixing up the interior and while that’s on order put the shine on the outside. Just my nickel’s worth of thought. Great video as always, keep it up!
You look too far down on the ol' thought machine up there. A guy might even give ya 20 fresh pennies and agree with it.
Something like that at least. Honestly, would love to watch a full washing detailing video where he discusses the future of the interior for another video.
NEEDS to get rid of all the old mouse deaths and fugies and spores hanging around the fabric of that old seat. Paint can be done at any time, need to keep the little guys safe first
@@Gantzz321
yes sir. one fresh piece of foam for the bench covered with mama's choice of Tennessee suede.👍
Having been through this, I recommend the interior next. Having a nice driving experience will inspire you to keep going to the finish
Hi
you know Derek , there's a special place in heaven for guys like you that save these old trucks large and small.
Duct tape the heater core what can go wrong?🤣
I would pressure wash the exterior and engine bay first,it’s satisfying and it doesn’t cost too much. The interior might be a few bucks depending on what you plan on doing to it. Happy New Year to you and your family!
Stretching some blue vinyl over that old seat.frame might look cool.
Your son will live the blessing of getting to work with his dad on this truck (his truck) for the rest of his life. I'm looking forward seeing it come together.... like my old 41 and 59 did working with my dad.
I think shining on the ol’ rig would be a good next step. Make her look good going to town, and then do a little work on the inside. Absolutely love this truck and the content you’re creating!
Brought a tear to my eye watching the scenery and enjoying time in the truck with your boy..............................................priceless.
My husband and I would both like to see an interior fix up…Maybe clean up the outside, but leave it as is paint wise. Looking forward to seeing what you decide to do!
Derek seems like a really down-to-earth guy. Those old 1970's-era Ford 6-cylinder engines are pretty sturdy and forgiving; they're more likely to vapor lock if they overheat. Just keep on top of the oil changes!
This is my favourite Channel!
I love seeing the old metal saved from the scrapper.
If a vehicle survives 40, 50 years it deserves to live on.
Not just the rare muscle cars!
Keep on Derek!
Just my opinion I like to see them as stock as reasonably possible.
Adding a larger rad is always a good idea!
Excellent DIY entertainment to rival the best mechanics and the funniest of comedians! You are AWESOME!
Vote for next step: Exterior
Exactly how I prefer to spend my NYE - watching Vice Grip Garage. Perfect!
What is NYE?
I actually said "i'll be dipped" when working on my truck last week. and my repair is holding! thanks for the good influence, derek and bentley!
😂 bruh .. I found myself doing the same changing the plugs on my barra, the back one is usually hard to get out and there’s usually a 10 year old plug of it’s stuck 99% of the time and this one was mint and came out easy 😂 and said to myself ‘well I’ll be dipped’ haha
I’ll be dipped!
I've been using that expression (I'll be dipped in s*it is the full version) since 1969 when a co-worker introduced me to it! Glad to see it's still in vogue!
I like your thoughts on keeping this a budget restore, just making it really nice without going crazy. Sometimes all a rig needs is some TLC to be nice.
As a retired mechanic, truck driver, with all my fingers, I enjoy watching you work. Thank you for your videos. 😊
Thank you for the constant entertainment. The next step in the "restoration" should be cleaning the paint, then go to the interior. Happy new year everyone!! I💪
Go for the exterior power wash, then spruce up the interior, including plugging the classic air venting around the floor. The fixes so far, are very satisfying. Love watching the rust-a-ration! Happy new year to Derek, Jess, and the boys!
Doing this the same way as the white Cadillac; making the best of what you have and doing what is actually required. Great as always
The Betty white, r.i.p
Yeah I have immense respect for him sticking to the channels roots and not just throwing piles of money at it just because he can
I just gotta say, the content and the editing are both 5 stars in my book. Your channel is hands down the most endutaining one on the interwebs. Your wit and charm and vidja quality are the cat's meow! Sorry to hear from your face space page about all the lost content from the inferior quality digicals, dang! Most of all, the almost complete lack of profanity in an age where even the f word is commonly used is so appreciated. My wife and I absolutely love what you and Jessica and the boys, and even the occasional guest appearance of Brother Krang produce. It seems to be bringing you at least some level of properity. You deserve it. I hope the work is worth the reward. We wait with baited breath for each new vidja.
Totally agree with the lack of profanity in your show. My husband and I totally enjoy all your shows. Love your support from family and including them in your channel. Was worried about your health when you were driving the Rebel back from Florida. Glad you decided to call it quits and get alternative plans to get it home.
Derek, your like the Bob Ross of automobiles! Fantastic video once again! Happy little trucks!
That was my first thought when watching the "Rocky" video. "Sssssst, ssssst, sssst, ssst"
I love the father-son rides but you really should have a weather-tight travel box you can take with you containing oil, coolant, etc, and a few tools. You know the stuff you need.
My oldest son of 4 boys rode around with me in my 77 f250 when he was 3 and its been parked since. Hes now 18 and i think its time to get it back on the road so we can all enjoy it again. Thanks for the motivation.
I'm less than 2 min into the episode and am already so happy with the direction you chose. Budget rebuild... teach those who are looking to do their first rig about what's important and how you can get em back on the road for years to come. Love it.
yup sometimes its nice to see a guy just using what you have in a budget and not just throwing $1000`s into it in the easy way out.
And it keeps it on the road driving.
I'm voting for the interior first. Personally I like the exterior to look ratty so nobody wants to mess with it.
If it was mine, I would concentrate on 2 areas: Spend some time underneath and replace bushings, seals, etc. Then when your confident there is no issues there, move to the interior a bit. Pull the seat, repair/replace wiring as needed, new floor mat, new seat or cover, general cleanup. Paint and exterior can wait, that is just cosmetic for the most part.
1.12 million subscribers! You've clearly got the formula. I'm hooked.
This is the best 50+ minutes I’ve spent on RUclips in a long time, keep up the good work.
A guy had a 66 with a 300 straight 6 and that was my favorite ford truck of all time. love the twin I beam suspension. Also had a 74 with a 360, a 79 with a 400 and a 92 with a 300 6 cylinder. I personally prefer the body style of the 73 thru 79 fords, I would love to have that solid truck you are working on. That brings back a lot of memories
Dude, I truly enjoy watching your videos. You're awesome. Thank you.
Thanks Nicholas
@@ViceGripGarage Ho ho ho merry Fordmas
@@ViceGripGarage you can just call me guy. Lol I've been watching your stuff for a while and I've learned a bit from it. I hope your and lovely family have a wonderful New Year!
Derek, you are an inspiration. So cool seeing you jam these revivals on the highways. Truly impressive.
This morning I applied my youtube learning and assorted collection of tools to the task of replacing a windshield water reservoir pump. Thank you, Derek, for your share of that learning. While you haven't told me how to work on a 2004 model of anything, you have showed that a guy with some tools can do just about anything. It's an '04 Malibu I bought new for a daughter.
Im all for interior first, then all the rest of outside. I thoroughly enjoyed this video, please continue with this rig Derek. Great stuff!
I agree interior next, comfort before outward appearance. The truck is a driver now and useful.
Interior next, no the ext. No the....
This truck looks like Uncle Jesse's on Dukes of Hazzard! I'm voting for interior redo next. Awesome stuff, keeping coming Derek!
Dead ringer for it that's for sure.
Thanks for saving me some typing, + 1 on the interior!
Exactly what I was thinking!
It is the same model Ford that was used for Jesse's truck
Will need a CB radio then too. What channel did the Dukes use 21 or 22??? That's the channel my fam uses ;)
This "restore" hits home for me, I got 82' 150 with the 300 in it also and has been so much fun learning about this rig and working on it.
Good truck to learn.
The 82 and 83 were among the best all around trucks with the 300. I had one in college.
The “Delicate” cut had me rolling.
Happy New Year VGG Family!
It’s great to see the next generation hanging out with you. I remember doing exactly the same thing. Your making memories that last a lifetime!
Having been snagged on the backside many times by shredded seat vinyl that has somehow turned into a steak knife, my vote is for an interior freshening.
Dont fall for this crap.
Yes!!!
Ridin round with dad. Precious memories.
Loving the content, expecially these lengthy episodes. Such better content than what's found on the motion picture box.
Definitely!
I’m going to love this series!!!!! Love how Y’all always try to keep everything relatable!!
You’ll get hooked Vice Grip Garage . I know I sure am . Lol .
Hey Derek! So glad to see Bentley going for a drive with you. Back when I was his age, shoot, all of my childhood and teens, I went with my dad every chance I could. My dad worked a lot. Never saw him through the week. He worked in a steel mill 3pm-11pm and worked for a contractor trimming houses 6am-2pm. Saturdays he built decks for people. So Sundays were really the only day I got to see my dad except for Saturday evenings and when I was old enough, I went with my dad to help him build decks. More like be in the way. HAHA. Lost my dad to cancer in 2017. What I wouldn't give for one more ride with him. The Harley in my picture was his. He bought it brand new. 2005 night train. It's mine now. My mom gave it to me for as my dad and I used to ride together.
Have a great day!
Oh yeah, I think you should do the exterior and then the interior.
good dad. :)
I know what you mean , my dad was a Jack of all trades I helped him do all the repairs around the house. I miss him sometimes. Been a long time.
I always make sure the mechanics are sound and move to the interior where you spend all of your time...the outside comes last. Seems like a solid truck...I have a 1973 High Boy 4X4 with a 390 4 speed...one of my favorite trucks.
Giving away my age here, but I remember that these trucks came with a “high output heater” option with a larger heater core. It was was a must have for us fellers here in Canada. Came with I nice chrome decal on the dash to let you know what you had. Probably not an option that people would go for on a Tennessee truck
u are 56 years old
Lol. How’d you guess
@@boerde6202 lol "legal on the road"
Great video. I like the simple way about your explanation. Keep up the good work. Happy New Year to your family.
@@boerde6202 Go watch some of South Main Auto's videos. You'll keel over looking at the kind of rust he has to work on. When your nuts look like popcorn you know your in the salt belt.
Like your garage cat “Motor”. Found your newest video an hour before the New Year. Nice way to bring in 2022 with you and your Son wrenching on the Ford. I say power wash the exterior. Thanks Derek for another adventure
Not even 2 minutes in, and I am loving what I am hearing about what the plans are for this truck! Love those late '70s Fords!
I like the way you think. It doesn't need to be high dollar full on show truck just cleaned up and made a very solid rig to be on the road for another 40 years.
VGG has to be one of my most favorite and enjoyed youtube channels to watch, and I am subscribed to a LOT of different car channels. Great video Derek, cant wait to see what's in store for the rest of this rustoration!
I really didn't want to be alone on New Years but when I saw that VGG uploaded a new video, it made my night so much better. thank you guys
You and me both
As a dad to a 5-year-old son, this video makes me want to spend more time with him. Thank you for sharing your time with the kiddo. It's going to mean so much to him.
I love it that you decided to just restore what you have and not do a full blown restoration. I love your channel and how you work. Your channel is awesome and your videos are so comparable to what I do with my vehicles. Keep up the good work man. Happy new year
Just started watching this video, totally agree with a guys decision for budget restoration. Bring the thunder! Oh, and Happy New Year to you and your awesome family Derek. , hope it bring the best of everything you can hope for. Now, back to your video with a cold snack.
Congratulations, you win the "like lottery". lol
Great budget rebuild video Derek. I love how you have your kiddos helping you out.
I think I would like an interior redoooo. But, but, but, a guy thinks you do what you doo.
Thanks for the great content. 👍
You should have hand washed it in the rain it cuts the tree sap and grime pretty good just a trick my GRANDFATHER showed me poor man car wash!!! HAPPY NEW YEAR 💯🇺🇸🔥✌✌
I like that old ford! My buddy had one in high school with a “fresh” bench seat out of a junkyard Caddy, we rode in style.
@@travo5050 I had two 3/4 ton 73 model and 73 f100 short wide with a 6in a row not enough Hp to tow the 300 6 you had to stop and check the gas fill up on oil 🤣🤣wish I had half the old vehicles back that I just gave away basically 🤦♂️💯🇺🇸🔥✌✌
Really looking forward to this build series. So far my favorite rig you've had on the channel. Love these old fords.
Rewatched this one this morning. Don’t know if you look at new comments on old videos but I gotta tell ya that videos like this one are your absolute best stuff IMO. Subtly and expertly combining entertainment with rock solid education/information. Sincerely, thanks for everything you do. More vidyas like this one please!!!
Interior, engine bay, then refresh the paint. Truely appreciate your content. Wishing you and your family a great 2022.
Your approach is perfect Derek most of us have to restore just this way thank you for keeping it real.
Just keeping it running is restoration for me. If it runs correctly, it's restored.
Nice to see the camera focus is “right on” in the new shop. The one thing that always bugged me in the old shop….camera focused on the background and not on Derek. My vote is to give the truck a nice bath, makes working on it so much more fun.
I’m an old GM guy, but, nothing compares to these old fords with the ride and the reliability of those old 300 straight sixes. I’ve had a lot of Chevy and GMC pickups, with a couple of Dodges for flavor, but my 77 F150 and 84 F150 are still favorites of mine. Just nice, simple, honest pickups that are a blast to drive and enjoy. Thank you for all your videos, always looking forward to your next rescue!
Absolutely loving this series. I am "restoring" my grandfather's 79 with the 6 in a row, and would love to see an interior overhaul. Dash, gauges, and the storm keeper outers.
Yes! A guy gets to watch a guy do a restore on something He owns. In my price range even.
I stumbled on your channel late Christmas eve, and I was hooked. You are quietly one of the funniest people Ive watched on youtube in a long time. And obvs a very very good mechanic. Ive watched several videos, and every one Im enthralled. Thanks for the hours of soothing phrases like 'Poverty Chrome'.
Thanks for subscribing, appreciate you watching
@Mike Hoskins totally agree, the comedy gets repetitive and predictable after a couple episodes, to the point I wish he'd drop the character totally as he's still interesting to listen to when being serious - but damn it's great watching the work and skills on show here.
I'll 2nd that,,, It;s muckin futch
Love the exploring Tennessee, beautiful country
I'd love to see the exterior pressure washed. I suspect it's going to be pretty satisfying.
our Guy is staying true to his channel’s mission (on a budget), but I’m very happy & proud that it’s shot in a new shop. It’s a great lesson in hard work, opportunity & being BadAss in general. Happy New Year, Bieris & the entire VGG Community. let’s all get it in 2022.
Lol! The 2-lift, 13-car-garage budget! :)
@@shawngrenaud - that’s what VGG success looks like to me: cars parked indoors under not-so-rusty cars, a shop cat, a handful of piston-powered rides for the boys…and flannel.
I like where a feller is going with this build. I would want to keep it a worker, daily drive able. Maybe a little internal refresh on the old 6. Maybe some light upgrades that will make her a tickle more peppy. Since you're aiming the finished product to potentially be a first vehicle for an offspring, a guy can't go too crazy with big blocks, sushi slicers, or laughing gas, but maybe a mild cam or better ability to inhale and exhale the go juice. I'm excited to see where you go with it and I respect your idea to make it where the average feller can put one like it on the street and head to town in it.
You know - anybody that can teach me about Sparkolaters and Lightning Hoses deserves my attention and respect. I think I'll keep watching fellers...
Brings back a lot of memories for me. I was two years old when my dad purchased a 1978 Ford 250. Big old 460 automatic. Spend a ton of years inside that truck on every adventure you can think of. Two tone metallic green supercab.
Really enjoyed this video on the old Ford. Reminds me of the time when we were teenagers working on our first vehicles. Getting it running good first, then interior and clean up exterior. No body or paint work, no money in the budget for that. Glad you're keeping looking like a survivor. Does not matter which direction you take first, just happy you are inspiring a new generation of young people.
I've read some of these comments and the VGG community is amazing. Incredibly supportive and very kind. I am so glad to be a part of this community and I can't wait to see what happens next with this truck. I hope 2022 is an amazing year for us all, and I wish you all the best. :)
That's awesome. My dad had that pickup in doo-doo brown
love these longer episodes, gives it a true TV feel. great job!
Awesome part one! Can’t wait to see the rest, bring that old Ford right back to life!
This video has a slightly different flavor than the usual and it is very good! It’s really good to see progress on a simple vehicle and as usual you do a bang up job of explaining the reasoning and method for what you are doing! Amazes me on how you absolutely convince me in every video to pick up and save on another old vehicle by just showing love to the poor old rigs. I love the content and keep on reasonably rejuvenating on this truck! Keep cleaning up the parts that eyes can easily see !
Dad was a mechanic. Thanks for bringing back those happy memories of being a little feller helping Dad bleed brakes. Pump it up. Down. Up. How she feel?
SWEET JOB ON THE MASTER CYL. BENCH BLEED
Maybe an actual temperature gauge would be a good addition. Making the interior a nice place to be can be an incentive to make the outside look good.
Well I'll be dipped, we got ourselves a vidjea to ring the new year in with! Thanks brother, we appreciate all your hard work this year. We are proud of how far you have come in your journey! We are also SUPER excited to see what 2022 holds in store. God bless you and your family!
Vgg coming out clutch with an awsome new years eve video!!! Thanks Derek, hope you and the family have a great new year, 2021 was a great year for you, can't wait to see what 2022 brings!!
Happy new year Derek n family I'm enjoying ur content may all ya be bless
Also in TN and just picked up a 71 F100 Ranger as my first restoration. Thank you for this content - as I hardly know what I'm doing, it's taught me a lot!
A guy can see Mortske Repair rocking back and forth on the floor right now because of the flexi-hose install. I love it. Happy and best New Year to you fellas and fellet’s
Setting off fireworks 15 mins ago for new year here in the UK, now watching a new Vice Grip.. 2022 has started well..👌🏻👌🏻👌🏻
My wife and I wait for these videos here in Yarmouth, Nova Scotia. It’s refreshing that you’ve kept the ‘realness’ of the channel. I’m more of a Chevy guy but all of these old vehicles are heads above what’s out there today. I hope you don’t have a blow by issue… you did make it back though and nice ice cube hose too, jerry rigging at it’s finest!
I'm in Yarmouth too lol. Small world.
The heater core issue may be that Ford in pickup trucks and Broncos they offered high output and standard heaters, either core would work but one may be a high output heater core. Love your videos made me a big fan.
Time to clean it up, exterior/ engine bay clean up and then focus on the interior. I hope that my son grows up like bently, love seeing him in the videos and helping, getting into shenanigans. Love the videos brother happy new year!
Looks like you got a new addition to the garage... a Kitty!! He or Her will help keep those pesky meeces away! Great to see you back in the shop wrenching Derek, my vote is for that oh so satisfying pressure wash of the Exterior. A very happy new year to you and your family, and may God bless you with a safe, fun, and prosperous new year !
I just love you!! We decided to binge watch VGG for bringing in the new year. Happy new year to you and your family!!
FORD First On Race Day!!! Hotrod 6 with a 3 on the tree Build. Nothing like driving an old simple honest basic pick-up!!!! What a beauty!! Thanks for all the great content!!!!.
I would probably move on to steering and suspension next. And then, if there's time, a bit of electrical normalization. But go with your gut! Thoroughly enjoying this!