@@nealbeard1 Yes of course, he deserves to go to school and be surrounded by a very good teacher (in mechanics if he likes this field), he is intelligent
Чо-то перебор даже для меня... 1)Нафиг этот карбид, когда у них на заднем фоне компрессор гудит? Штуцер сделали бы в крышке и дали бы бара 3 не больше. А сколько там этот карбид давил? 2) Если они знали, что направляйки и сёдла менять не будут, может не стоило клопы обезличивать и в общий таз валить? Я понимаю, что фрез для прирезки нету или клиент не заказывал замену направляек, но неужели и фломика у них нет, чтоб цифорки на тарелках проставить? Всё таки приработаны уже клопы к направляйкам.
Exactly, those 3rd world places totally have better schools and equipment for mechanics to accomplish their work with a high standard of craftsmanship. Mechanics that can afford a 25,000$ toolbox, plus the cost of tools must be complete shade-tree hacks that can't get work. You don't need any diagnostic tools or anything like torque wrenches to work on modern equipment that cost many hundreds of thousands of dollars, in America our large scale farming is done all by hand because the mechanics are useless when it comes to fixing equipment.......
They say if you're old enough to hold a tool you're going to work. No school or childhood for this kid. He's gonna be a good mechanic one day. Not a professional or proper mechanic but a good mechanic by their standards. 😆
We don't know what can be happen to this boy,,, maybe he will be a very professional mechanic,,but i have learn something from this video,,,we Don't need a good tool but we need a good idea n we must use our brain not only just talk but nothing to do,,,
@@anokkelantan3870 working on a cylinder head on the dirty ground isn't professional. Using a mallet and socket by banging on the valve springs to get the keepers out isn't professional either. If he doenst change how he does things or where he does things he will never be considered a professional. Professionals never work on engines or cylinder heads on the dirty ground where you can do more damage than good. Even if youre just tearing the engine down you wouldn't do it in the dirt. You always work in a clean environment. Its seems like in alot of these videos they dont care and are just trying to make a quick buck.
Sam nie wiem co lepsze, czy turlanie głowicy w piachu po betonie, czy dobijanie młotkiem zaworów w gnieździe, gdzie i tak trzonek opiera się o beton na którym leży 🤦♂️ Ciapacka robota 👍👍🤣🤣
That's how to get things done. Let nothing stop you. The young man looks like the apprentice who is learning every day, carrying on the knowledge of experience from the master mechanic.
That little boy has a bright future ahead I'm sure he won't be waiting on a welfare check when he's 21yrs old nor killing and robbing if that was in the U.S. cps would call that child abuse but other countries knows the values of teaching kids to work I admire these people reminds me of my childhood days
Ah, no, he should be in school, instead of getting poisoned. Also it's odd that they are pressure testing with costly carbide, when one can hear an air compressor in the background that would do pressure testing for like free and without chemicals.
@@nealbeard1 I agree but sometimes what you learn outside of school help to build your future I grew up on a farm I had constant work to do I went on to college too now I'm a welder something I learned before college and it paid my way through school
Returning worn-in parts to the original location is important for something like a rocker arm that's been rubbed by a certain cam lobe and wear-matched steel-on-steel. There's no-such concern for the end of the valve that's almost entirely only pushed on. The shaft is as far as engines go is 'loosely' bushed by the valve guide - no wear-matching, and the valve sealing surfaces are all lapped and inspected for contact.
A 220 volt, ungrounded, un-GFI'ed, not double-insulated, metal cased drill!! Used on a dirt floor!! Thrilling!!!!! Someone should inform them that random wire-brushing of valve seats just makes them look prettier but doesn't help them seal much. Also one wonders why they don't make a "hot tank", it's just a tray with an electric heating element and some cheap lye.
The problem in the US and Europe is electronics on cars. Gas milage has replaced reliability, durability and ease of service. Those massive tool boxes contain more diagnostic crap than actual tools. Sad state when you have technicians instead of mechanics. Go to a machine shop, that’s still pretty cool.
لماذا دائمن بلتعليقات اشاهد من يحاول ان يصور انه في امريكيا تطور احسن وان في معامله لاصحاب المهن احسن من عند المسلمين وان امريكا راعية الانسانيه وتحافظ علئ قواعد السلامه احنه بلعراق مو شفناهم قمة الوحشيه ولا انسانيه كله كذب حبهم لنهب وسرقة الثروات اكثر شي
Right, their parents send them. Or they do it by their own will. They belong from very poor families to support their family they start learning & working at age of 12 or 15. Also they get very little pay like $3 or $5. But they don't beg & prefer to work.
Havent these peaple herd of a bench its all scratching on the floor seeing this i dont think I would be using thete services And why are they dressed in rags
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Ого,у них там даже электричество есть?
That little boy, has man hands! No fun filled childhood, for him! Thanks from. St. Paul Minnesota.
Howdy, neighbor.
Thank you so much guys, most of the workshops have kids working & learning here. Most of them are very poor & they are supporting their families ❤️❤️
I used to stay in woodberry
That little boy should be learning in school. That is how people improve their conditions.
@@nealbeard1 He is, enrolled in trade school.
I grew up in my father's rural garage in the 1960's. I learned enough that I was able to do car restorations over the years.
❤️
This little boy makes you want to have him in our workshop, he deserves to learn a lot and in good conditions, he is already very strong
Ah, no, he should be in school, instead of getting poisoned.
That little boy should be learning in school. That is how people improve their conditions.
@@nealbeard1 Yes of course, he deserves to go to school and be surrounded by a very good teacher (in mechanics if he likes this field), he is intelligent
injector tubes are leaking
Чо-то перебор даже для меня...
1)Нафиг этот карбид, когда у них на заднем фоне компрессор гудит? Штуцер сделали бы в крышке и дали бы бара 3 не больше. А сколько там этот карбид давил?
2) Если они знали, что направляйки и сёдла менять не будут, может не стоило клопы обезличивать и в общий таз валить? Я понимаю, что фрез для прирезки нету или клиент не заказывал замену направляек, но неужели и фломика у них нет, чтоб цифорки на тарелках проставить? Всё таки приработаны уже клопы к направляйкам.
I guess a $25,000 Matco tool box is not needed in any country other then in America where the mechanics are useless. 💪
The tool guys wait outside the trade schools and get the new graduates to sign a contract for 50 thousand in tools.
They fix nothing, just throw parts at it until it runs again.
Exactly, those 3rd world places totally have better schools and equipment for mechanics to accomplish their work with a high standard of craftsmanship. Mechanics that can afford a 25,000$ toolbox, plus the cost of tools must be complete shade-tree hacks that can't get work. You don't need any diagnostic tools or anything like torque wrenches to work on modern equipment that cost many hundreds of thousands of dollars, in America our large scale farming is done all by hand because the mechanics are useless when it comes to fixing equipment.......
Tools can't replace common sense and good worth ethics
If it wasn't for Western tech these guys would just be using a rock to hit another rock.
That young man will b an excellent mechanic and he’s already got all these American kids beat by a mile good job young man
Лайк. Судя по лицам, то момент затяжки определяется, именно по ним. С какой силой нужно затянуть, такое лицо и зовут.)))
Пацан м8-м10 ток крутит.Ступицы кабаны.
Опрессовка ГБЦ карбидом вот это технология!
Паренёк молодец. Толковый растёт.
И с образованием тема закрыта....Моторист.
Интересная идея проверять герметичность головы карбидом.
They say if you're old enough to hold a tool you're going to work. No school or childhood for this kid. He's gonna be a good mechanic one day. Not a professional or proper mechanic but a good mechanic by their standards. 😆
Q
We don't know what can be happen to this boy,,, maybe he will be a very professional mechanic,,but i have learn something from this video,,,we Don't need a good tool but we need a good idea n we must use our brain not only just talk but nothing to do,,,
@@anokkelantan3870 working on a cylinder head on the dirty ground isn't professional. Using a mallet and socket by banging on the valve springs to get the keepers out isn't professional either. If he doenst change how he does things or where he does things he will never be considered a professional. Professionals never work on engines or cylinder heads on the dirty ground where you can do more damage than good. Even if youre just tearing the engine down you wouldn't do it in the dirt. You always work in a clean environment. Its seems like in alot of these videos they dont care and are just trying to make a quick buck.
Minute 7:42 the man in blue on the left! It couldn't be better.
@@BBQandStreetCars professionals get paid to do something.
Момент затяжки измеряется в силу подростка. 🤷♂️
Good job brother... Alhamdulillah..
You had to mark each valve and put it in same place where it was, unless whey are new.
Look at you Mr fancy pants...
even if they are new you still have to match them with the proper location...but shitholia
nice job my friend
А дядька в синем платье походу директор СТО!
Poor man's magnafluxing.
god job👍
Uauuu non avevo mai visto fare la prova idraulica con la acetilene , bravissimi
I love watching these guys work, they are awesome.
Thank you so much David ❤️
Muito bom mesmo gosto muito do trabalho de vocês Deus abençoe a todos 👏👏👏👏👏👏👏👏❤❤👍
Pensei que era só eu que via esses vídeos no Brasil 🤣
Sam nie wiem co lepsze, czy turlanie głowicy w piachu po betonie, czy dobijanie młotkiem zaworów w gnieździe, gdzie i tak trzonek opiera się o beton na którym leży 🤦♂️
Ciapacka robota 👍👍🤣🤣
😆😍🤣😂😂🤑🤪🤪
That's how to get things done. Let nothing stop you. The young man looks like the apprentice who is learning every day, carrying on the knowledge of experience from the master mechanic.
Right, thanks for your comments ❤️
That little boy should be learning in school. That is how people improve their conditions.
@@nealbeard1 maybe 100 years ago better off today with actual skills and common sense.
Карбидом опрессовывают😳
Немцам есть чему получится. А то возомнили себя … 😊
@@Jivi_vecno я их уважаю. Умные они
Minute 7:42 the man in blue on the left! It couldn't be better.
10:20 Новая раскоксовка от лавр 😂😂😂😂
What is the substance they crushed up with the hammer and put in the cooling jacket with hot water to create the hi-pressure?
carbide, used to make gas for welding in the old days
@@sandrakemkers3158 its still use today, in asia
@@sandrakemkers3158 as children we used carbide to shoot for the New Year
Bom trabalho 👍👍👍👍🇧🇷
❤️❤️
I guess its better than having a work table to work on
They like this position evidently.
OAMENI CU MÎINI DE AUR 👍
Прогресу их не победить
اگر شرایط کار باشه میایید تهران؟
А я к пасте притирочной "жидкий ключ" чуть брызгаю
Vsetka robota na zemi v piesku oni ani nevedia pracovat na nohach na cistych stoloch je to des🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰
I don't see any action against the cracks
What di they put in there to make the pressure?
It was carbide, makes acetylene gas and causes pressure, don't know how safe it is
@@loosehandle1 odorless(the bottled stuff is odorized), toxic as frig, and highly flammable perfectly safe... what could possibly go wrong?
Goed werk! ouderwets maar degelijk, continue ;-))
man wat is hier goed aan?. lekker ongeïnteresseerd knoeien.
Have these people never heard of a work bench? I've never seen so much crawling around in the dirt.
It's a crazy culture when no one in the family business invests for the future.
Oque vcs mistura na água pra cria pressão dentro do cabeçote?
Карбид
11:09 ты что творишь, диверсант Хренов 🤦
Я так понял кинули карбид?!!!
Good job 👍 👍👏👏👏👏
Thanks ❤️
Esses sao da hora
Esse motor vai fica bao kkkkk
малі діти працюють , а наші за юбку держаться.
Why are they doing a valve job on a head that has multiple cracks?
Its not cracked just bad injector cups. They are replaceable
@@crperformancetucker5065 I thought the injectors were to be installed and torqued down on a pressure test
@@Ricky-mouser not always
Slm allah kolaylik versin insallah
Did they fix the mofo or not?
Excelentes mecánicos con herramientas precarias i mucha inteligencia en sus x cabezas
That little boy has a bright future ahead I'm sure he won't be waiting on a welfare check when he's 21yrs old nor killing and robbing if that was in the U.S. cps would call that child abuse but other countries knows the values of teaching kids to work I admire these people reminds me of my childhood days
Thanks for your comments ❤️
Ah, no, he should be in school, instead of getting poisoned.
Also it's odd that they are pressure testing with costly carbide, when one can hear an air compressor in the background that would do pressure testing for like free and without chemicals.
That little boy should be learning in school. That is how people improve their conditions.
@@nealbeard1 I agree but sometimes what you learn outside of school help to build your future I grew up on a farm I had constant work to do I went on to college too now I'm a welder something I learned before college and it paid my way through school
@@georgegonzalez2476 What is this "carbide" you speak of ?
Немцы отдыхают. 🤦♂️
Am I the only one wondering about how he doesn't number the valves. They just collect them in a bundle and of they go 😵
Returning worn-in parts to the original location is important for something like a rocker arm that's been rubbed by a certain cam lobe and wear-matched steel-on-steel. There's no-such concern for the end of the valve that's almost entirely only pushed on. The shaft is as far as engines go is 'loosely' bushed by the valve guide - no wear-matching, and the valve sealing surfaces are all lapped and inspected for contact.
Bad injector cups?
Bagus
Workbench? never heard of it.
ну и рукожопы, клапана разсухарили и некоторые сухарики выпали на пол
Это карбит ?
waste oil is poisonous, good on children's hands
бедные дети--у моего смартфон из рук не вырвеш ь
good job man ;-)
Thanks ❤️
работает ребёнок. как так ? в школе должен же быть.
Poor folks got poor ways but hey it works.
A 220 volt, ungrounded, un-GFI'ed, not double-insulated, metal cased drill!! Used on a dirt floor!! Thrilling!!!!!
Someone should inform them that random wire-brushing of valve seats just makes them look prettier but doesn't help them seal much.
Also one wonders why they don't make a "hot tank", it's just a tray with an electric heating element and some cheap lye.
Эти люди как-будто после мировой катостроффы, пользуются остатками цивилизации!
Зато если будет катастрофа им похер все будет,дальше то уже куда хуже...
эти люди показывают тебе, что вслуч чего и вам свет отключат, в с голоду подохните. Ой, как прав тов. Лавров. Ой прав то как.
Дааа это 21век или 50 прошлого😞🤔
Малодец!!!
good work👍
Шо за камішки кидають в голову шо создать давление?
Зачем камни в гбц?
4valve per cyl.its strange to se
Это Подмосковье.
Карбид закинули?
они карбида наложили?
Скорее
The problem in the US and Europe is electronics on cars. Gas milage has replaced reliability, durability and ease of service. Those massive tool boxes contain more diagnostic crap than actual tools. Sad state when you have technicians instead of mechanics. Go to a machine shop, that’s still pretty cool.
Right thanks for your comments ❤️
Yes but modern cars are so much better because of electronics.
Alaa es pequeño yashua es grande
I use coca cola and drop in a few mentos right before in close it up.
ребенок лысый, жестьяки)
I think you are the hardest working people on the planet✅👍🧑🔧🧑🔧
Thank you so much ❤️
ان العمل عبادة. الله يكون في عونكم. احترمكم كثيرا من المغرب 🇲🇦
لماذا دائمن بلتعليقات اشاهد من يحاول ان يصور انه في امريكيا تطور احسن وان في معامله لاصحاب المهن احسن من عند المسلمين وان امريكا راعية الانسانيه وتحافظ علئ قواعد السلامه احنه بلعراق مو شفناهم قمة الوحشيه ولا انسانيه كله كذب حبهم لنهب وسرقة الثروات اكثر شي
It makes me wonder why this country is so poor. That little kid is likely an orphan just works for table scraps.
Нужно было спичку поднести
До Пасхи далеко ещё.
Why do children work?
hard work for kids
Right, their parents send them. Or they do it by their own will. They belong from very poor families to support their family they start learning & working at age of 12 or 15.
Also they get very little pay like $3 or $5. But they don't beg & prefer to work.
ПАКИСТАН переводиться как чистая страна *-+++
А какжэ трещины ?????
Это не трещина, стаканы дули. Он их потом развальцевал
Look at that kid, he will be master at 25, experience is better than college
Watching this made me feel silly for wasting me time with things like torque wrenches and plastic gasket scrapers.
This child labour is unacceptable!!! 😡😡😡😡😡😡😡
Minute 7:42 the man in blue on the left! It couldn't be better.
I don't understand what they are doing, but it looks awesome whatever it is 😊
Thanks 😊❤️
Highest I.Q. amongst this lot = 25
Still allot More than Biden 🥴
их надо в свалку в ГЕРМАНИИ устроит /*-+++
Havent these peaple herd of a bench its all scratching on the floor seeing this i dont think
I would be using thete services
And why are they dressed in rags
old school heads were the best .. modern day shite is not worth messing on with ... this is recycling at its best ... modern day just throw it away ,,
Халтура . Клапана и втулки старые .
- какие старые ? им еще 50 лет не стукнуло !поработают еще !
Quand j'ai entendu (Allah akbar) à la fin du film j ai eu de la pitié pour ces pauvres gens.
24v fuk that lap them your self lol