How to Replace Knock Sensor 1997-2003 Ford F-150
HTML-код
- Опубликовано: 22 янв 2023
- Buy Now!
New Engine Knock Sensor from 1AAuto.com 1aau.to/ib/1AEKS00035
This video shows you how to install a new knock sensor in your 1997-2003 Ford F-150. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.
This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa58/1AXAA00013
• Pocket Screwdriver
• 8mm Wrench 1aau.to/ogA/1AXAA00011
• 10mm Deep Socket
• 19mm Socket 1aau.to/o5b/1AXAA00043
• 7mm Socket 1aau.to/oaQC/1AXAA00017
• 8mm Socket 1aau.to/oaQC/1AXAA00017
• Fuel Line Disconnect Tool 1aau.to/oG/1AXAA00041
• Pliers
• Ratchet 1aau.to/obiY/1AXAA00016
• Socket Extensions 1aau.to/oa8e/1AXAA00015
• Razor Blade / Gasket Scraper 1aau.to/ohq/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
On the 5.4 fords 2 valve . You don’t need to do all that . Just get a ratchet and extension and you can reach it from the top behind the alternator. Easy peasy
Wow alot of work for one sensor. Probably around $1000 to $1500 job cost.
What’s the name of the sensor that plugs at the end of the coil and injector harness? It looks like a grayish “C” shape. Thank you.
Gracias amigo por sacarme de dudas
On a 2003 f 150 4.6 is there only one knock sensor, and if I saw correctly, the plug end of the new sensor is a female? I my research shows both male and female ends on the replacement knock sensor. I need to make sure which one I need. Thank you
Will a faulty knock sensor cause a knocking sound only when the engine is warm after driving it for a bit
Would this apply to a 1997 Ford Explorer (V6 SOHC 4.0) also ?
This is the only way to get to the knock sensor on a NPI 97 5.4 2valve. on the PI 2000 engine there is an easier way. A non PI motor has both heater hoses at RR of engine. The PI has one on the RF and one on RR.
Why didn't you tell us what size the motor is
Mechanics still use air tools? Make sure you wear hearing protection