Sterling | King Pin Replacement

[@mesquitaautoeletrica1368]

In my opinion the best heavy mechanics channel on RUclips.
A big hug from Brasil

[@SemiWorkin]

Thanks for watching and commenting!!

[@바람꽃-b1b]

You're a good mechanic, aren't you? You are the best!

[@SemiWorkin]

Thanks for watching!!

[@redmesa2975]

I made a simple king pin puller with b7 allthread and 2- 2" thick steel blocks. Looks similar to the OTC tool.
B7 alltread, 5/8" diameter has something like 30K lbs tensile strength. Used with a short porta power press, it works great. Didn't cost much to make. The 2" steel blocks were in a scrap bin, at the local steel supply yard.

[@SemiWorkin]

Thanks for watching!!

[@armandooliveira3302]

Muito bom trabalho, só que aqui no Brasil a gente lava todas as Peças, antes de montar!

[@cameronmoroney1657]

Thanks for the video mate appreciate how in depth it is. Keep it up 👍

[@IndianTruckWorkshop]

Great work buddy 👍👍

[@JoederixPalay]

Ka toolsd2 aq baguio pero slamat at marami aq natutunan syo.
Call ka messenger ko if d2 ka a part of benguet hehe

[@neilobao10]

Na minha caminhonete, não deixava da essas marretadas! Foltou os sacas pivôs para isso! Agreste demais!

[@albertooropeza1843]

Buen trabajo. Que tolerancia manejan en juego axial y en juego radial?

[@juanpabloespinozamamani4014]

Exelente video

[@mbarkiahmed5181]

Bon travail et bon mécanicien

[@edenfieldjared0]

I am going to check mine in a few if you happen to see this were you using a tire iron to check for movement or? Thanks in advance

[@rogerlopez7830]

Dios te bendiga y muchas Gracias por tu en señansas

[@oseaslarosa242]

Excelente!! Solo falto lavar pero al dueño del camión no le gusta lo limpio.

[@PAT111]

What were you hitting at 9:30?

[@paulinorodriguez1388]

Muy buen trabajo

[@scottanderson5290]

I assume you replaced the bushings it would have been nice to see that

[@SemiWorkin]

Thanks for watching!! Check out my other videos.

[@jesussolorio8221]

En México hay buenos mecánicos que no golpean la rosca de los tornillos, golpean el otro fierro hasta que caiga el tornillo solito por gravedad.

[@Nico-iv1cq]

No me gosta trabalhar com mazo, você uma herramienta una herramienta para quitar las puntas articuladas de las barras de dirección.

[@ronnygarzon5708]

Cuando no sale y se pone duro si. Pero eso pasa más en las costas donde hay mar 🌊

[@drishy94303]

Twenty sledges to break that tie rod end!

[@johncone9516]

Are the king pin bushes pre sized or do you have to line ream them please?

[@SemiWorkin]

Thanks for watching!! Yes they are no ream kits from stemco.

[@danieln6450]

Las lainas de ajuste causan mucho desgaste en la parte superior...

[@HondaRedneck16]

Do you have to replace wheel seal pulling tires off that way? I have never done it that way

[@SemiWorkin]

Thanks for watching!!

[@JavierRodriguez-pp8ci]

Muy buen mecánico. Pero lo único malo es que no limpia nada.

[@7382jmjh]

Si, le falta aplicar la limpieza. Tampoco me gustó cómo ajustó el balero del perno

[@АртурМалыхин-ъ9б]

Спасибо, тоже шкворня меняю.

[@Невторойканал]

Почему замену втулок шкварней не показал?

[@gurvindersingh6021]

Helo sir bush m gress nahi lgai

[@JoohyeonIm]

it's really king

[@Vertikala-pc5ig]

Do you have video for Columbia?

[@SemiWorkin]

Thanks for watching!!

[@yeffersonmontanez158]

buenas tardes amigos montar taquetes sobre rolin motor renaut E 330 mack eletronico grasia

[@hansenghong5029]

Ok thank

[@AgustinVeiga]

O certo e lavar todas as peças

[@bornikrodrigo7544]

Nice very imptessive

[@SemiWorkin]

Thanks for watching!!

[@damanjitgakhal5958]

What air gun do you use

[@SemiWorkin]

Thanks for watching! I use 1/2” Chicago Pneumatic and 3/4” Chicago Pneumatic.

[@임정빈-p9w]

허브가 무엇인지?

[@notyou6950]

If it was me, I be high pressure washing this this thing first. You know, asbestos dust and all, but thats just me.

[@SemiWorkin]

Thanks for watching!!

[@transporteseconstrucoes945]

Muito ruim não mostrou se tirou mesmo a folga pois só trocou os pinos teria que ter trocado as buxas internas.

[@dehsouza3767]

Algo me diz que vai dar folga rápido nessa manga de eixo 😟

[@JT-qf4it]

I would have cleaned the backing plate assembly. Bur that's me.

[@SemiWorkin]

Thanks for watching!!

[@Nico-iv1cq]

The num to protect the thread, also adopt this procedure.😐😑😐

[@SemiWorkin]

Thanks for watching!!

[@victorandrade8563]

👍🏻👍🏻🇧🇷

[@sergioperlman8295]

Mal sacada las rotulas tendrían q tratar de no golpear tanto

[@cesargoncalvesmoreira2578]

Dade saca pivo seu picareta

[@bobcat8439]

Glad I didn't buy a split rim truck get a flat tire and ur screwed

[@nilst1003]

Hillbilly Style.