International | Front Suspension Rebuild | Front Springs + King Pins

Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
Replacing Front springs and king pins on an International truck.
Please check out my other videos: / @semiworkin
Check out some Semi Workin apparel: teespring.com/...
Tools Used:
OTC Tire Dolly: amzn.to/3uRQEZW
1/2" Air Impact Wrench: amzn.to/2M1bV2l
3/4" Air Impact Wrench: amzn.to/3nW2ZcN
Pneumatic Bottle Jacks: amzn.to/3nKxyBR
3/4" Axle Nut Socket Set: amzn.to/35eFdRW
As an Amazon Associate I earn from qualifying purchases.

[@winstonspratt5556]

This video is off the charts... It's is unquestionably one of, if not the best video I have very seen.

[@donmunro144]

You make that look so easy. I've never had a kingpin come out that easy. I usually end up cutting them out with the airarc.

[@SemiWorkin]

Thanks for watching!!

[@wvhillbilly2818]

That tool you were using to evenly clean down the bushing for king pins is awesome, I’ve fought for hours trying to get them out and properly clean those down for good and tightness out of them , at least you got all the correct tools you need to do the job there , most places don’t . I’ve been a diesil mechanic for 17 yrs mobile for 5 and never had stuff come apart that easy

[@SemiWorkin]

Thanks for watching!! Stemco bushing driver: amzn.to/3u89lsK

[@nicolmaster5568]

Hola, usted es un mago en su trabajo, lo felicito.
Atte. JM desde Rep. Dominicana

[@noeunkim7451]

There nothing that a little hammer can't solve. Love the video!

[@SemiWorkin]

Thanks for watching!!

[@angelgustavoacevedo1464]

Muy útil. Gracias por compartir sus grandes conocimientos. Saludos desde Argentina. Me suscribo ya mismo a su canal.

[@isaaccharles1189]

Great video semi working l am learning a lot keep the videos coming

[@SemiWorkin]

Thanks, will do!

[@winstonspratt5556]

Awesome video.. Excellent and hugely informative.

[@robertwootton2161]

All that new stuff and still put back that old Ball joint with the torn boot

[@blashyrkhification]

Good job buddy

[@rajgill3482]

Superbly done!!

[@SemiWorkin]

Thanks for watching!!

[@hotdognonesky3766]

I'm wondering what the cost was for the job. You have all the right tools, I'm rolling around in gravel with all the wrong ones. It's probably worth my time to just have it done for me.

[@SemiWorkin]

Thanks for watching!! Hard to say how much because each job is different but the right tools always help.

[@jeffphelps2080]

Just wondering where you guys are located? Great videos love watching

[@SemiWorkin]

Thanks for watching!!

[@moviemania1137]

Pakistan

[@antoniovazquez-ty6dc]

TODO MUY NORMAL Y BIEN HECHO PERO ME PREGUNTO PORQUE HUBO QUE CORTAR LOS ENGANCHES DEL ELÁSTICO SI SE PUEDEN UTILIZAR LOS MISMOS YA QUE ESO NO TIENE DESGASTE .

[@MrShanghai34]

There are 2 down thumbs, What do they not like about it? Bless their hearts................ Great video

[@SemiWorkin]

Thanks for watching!!

[@truckerman-01]

Great job

[@SemiWorkin]

Thanks for watching!!

[@dinhpha]

Kích lấy vỏ đó bên ấy bán nhiêu thế anh

[@jimjones1678]

Should kingpins be greased with the wheels off the ground?

[@usmcraid5332]

I would

[@benzogabe7121]

🐐

[@jesussolorio8221]

¿Qué hacen las muelles que quitaron?

Hay quá

[@geraldomiranda5412]

Muito bom.servico de primeira

[@MikhaelEvgenyevich]

А что шкворневой палец должен так легко руками всовываться?

[@alejandragarduzahernandez2434]

Como cuanto cobran por aser ese trabajo

[@hasensuintai8841]

👍👍

[@SemiWorkin]

Thanks for watching!!

[@СергейЧистяков-з7ы]

Перчатки для чего изобрели?

[@laureanolaureano5086]

🖒🖒

[@christinabutts32]

So crazy I used to set the springs too. I love working for IH

[@SemiWorkin]

Thanks for watching!!

[@danieldonnelly3602]

we don't need no stinking torque wrench or specifications, we measured it with our eyes.

[@ReneValenzuela-u2k]

Yo traigo internacional ProStar 20009 el problema k traigo es k baila mucho y se mueve para los lados k pudaser la fala

[@shakeelkhan3689]

Bhai aap kam se Ham sahmat Hain Kyunki company ka kam aapane karaya Gadi ke andar Kyunki koi bhi aadami company ke kam ko interfere Karega to vah nuksan uthaega is per Koi shak Nahin Har Waqt gadi nuksan hi deti rahti hai Hamari

[@shakeelkhan3689]

Yah Hota Hai Sahi tarike ka kam Yahan to pata hai bhai Ham Saudi mein hain Yahi dopate wali gadi hai gadi uske andar तीन-तीन Patti kar Diye Hain logon Mein Hawa wale gadi Aisi Chalti Hai Jaise Ghoda chal raha ho

[@nageshpalakurla6834]

Please explain that

[@юрийфадеев-о3я]

Через год будет болтаться и в балке и во втулках

[@batterpm11]

I’m guessing this is not your first time.

[@SemiWorkin]

Thanks for watching!!

[@christinabutts32]

I build these trucks every day was on axle line now im on fuel lines. Lol

[@SemiWorkin]

Thanks for watching and commenting!!

[@shakeelkhan3689]

Bhai aap kam se Ham sahmat Hain Kyunki company ka kam aapane karaya Gadi ke andar Kyunki koi bhi aadami company ke kam ko interfere Karega to vah nuksan uthaega is per Koi shak Nahin Har Waqt gadi nuksan hi deti rahti hai Hamari