@DonnDIY is a genunine master of engineering and building his own vehicles from scratch. Check out all his mind-bloqing projects on his channel! www.youtube.com/@DonnDIY
Унас в россии в архангельске в частности подобные и даже гораздо круче вездеходы и плавающие и болотоходы делают в гаражах многие любители для северов и не только колёсные но и гусеничные тоже
Привет любителям я из 29региона Россия если интересно могу скинуть фото и не только гораздо более крутых самодельных вездеходов у нас целая индустрия в области снего и болотоходов как колёсных так и гусеничных с потрясающими возможностями включая водоплавающие 😅😊😊
I’ve seen many, many DIY guys on UT, but there is only one DONN DIY. That young man is quite famous in his native Estonia, but no doubt he will soon be famous all over the world!
Jaa, kuskil miskit toimub... Eestlased. Btw we are all kind of like that in Estonia. Near my fifties now I grew up there appreciating a few what we had. We built our own toys all the time.
Sensational, it's people like this that humanity needs, the guy is a scientist, mechanical engineer, electrician, turner, manufactures parts, the guy does everything, NASA needs to know this man.
Not trying to take anything away from the guy but I haven't seen any engineering in this video. I didn't see him once sitting down at a computer or with pen and paper doing math.
@@RoonMian There were numerous parts cut on a plasma cutter. Now, these are not done by hand. You DO NEED to operate a CAD software that works with the plasma steel cutter. So, there's the math, the computer and the design.
Well done son. This old man (75) would love to have a cup of coffee with you while you walked me through this video. This kind of project keeps the mind alive.
The prolonged hours of work can exert significant physical and mental strain on an individual, posing health risks and negatively impacting overall well-being.
That is simply amazing work that you did. So many diverse talents that you have in order to look at, figure out and then build it. Steering, axles, instrumentation, exhaust, motor, clutching & that fantastic frame work. I'm in awe and jealous.
У этого дол6ойо6а есть ПЛАЗМОРЕЗ! А он хуинёй занимается, делая этого багги-переростка из тяжеленных профилей! Эта дура полторы тонны небось весит теперь! А мог бы весь корпус сделать несущим из тонкой стали. Полтонны сэкономил бы.
"Гарри, а давай сделаем монтаж" (к/ф Человек с бульвара Капуцинов). Потрясающее видео, где все гладко и четко. А за кулисами его монтажа стоит просто титанических труд измерений, подгонок, переделок и др. Я в шоке. Десять лайков❤
Не потратил 1000 часов, а со знанием дела проделал хорошую работу приобретая от жизни бесценный опыт всего-то за 1.000 часов. Когда что-то делаешь для себя то и делаешь это с удовольствием и это не считается что ты что-то потратил.
Во первых в видео ролике не показана инженерная работа. Все детали как бы сами собой делаются по выкройке. В кадре даже штангенциркуль не разу не показали. Еще у парня слишком чистые руки, как будто он их специально моет после каждой операции с деталью.) Если вся сборка делалась по чьим-то чертежам, то времени 1000 часов может и хватит, в противном случае это чистое надувательство одного из автослесарей.)
Там мотор рядом, не холодно, можно сделать от мотора подогрев сиденья и кокпита - не помешает. Отлично снято и смонтировано - можно смотреть для поднятия настроения - чистый позитив. 👍👍👍
Hello from Norway.🙂 This must be the best DIY 4 wheel drive vehicle I have seen made. Craftsmanship and the way donor parts are used, took this build to a very high level. I believe this nice build will last for many years, since quality of parts used, and welding work of the thick steel used, makes this build super strong. I liked how you used the plastic and rubber to form the shielding and the roof. In the end you made it look like a fabric build from a famous brand. The power from the large donor engine, looked awesome. I liked watching the build video a lot. Thank you.👍
However, I had to laugh when reading how much attention was given to the environmental impact in the subtitles. It's not as if everyone is going to take on projects like this.
I am sure this was not done in just 30 minute. But the amount of talent and skill that you demonstrate in this build up, is out of imagination. No talk, No BS and just pure skills. Job well done mate.
Building a vehicle over an extended period can incur substantial costs, potentially straining financial resources without a guaranteed return on investment.
Однозначно этому парню надо работать в конструкторском бюро, все очень грамотно собиралось чувствуется, что все тщательно обдумывалось. Молодец удачи тебе парень.
Awesome! Using OEM car parts saves time, money and engineering headaches. Plus, they last a really long time and are very strong. I like the way you think. That UTV looks bulletproof! Great job.
A designer, engineer, mechanic, fabricator, welder, auto-electrician, film producer and editor ......... if that isn't an impressive range of skills, I don't know what is! Really enjoyed watching this.
Dude! You are my hero! I am way beyond the suitable years to go do this sort of thing myself but after watching you, I am content to just sit back and enjoy your outstanding ability. Good on you and keep the videos coming!
Wow! I am impressed! I really enjoyed watching the video from start to finish. Knowledge, skills, and experience that he has. Keep it up Donn! Greetings from Arizona.
Congratulations. Huge patience, excellent knowledge on the car and a video documenting the build in detail and explaining exactly what parts were needed to complete the new vehicle. The video has been seen over 2,000,000 million and only 16 thousand likes. If it was any chick it would have likes as many views. This is everyone's right, but you are doing injustice to the video and especially to the protagonist who, in my opinion, is more than entitled to it. Well done to you!!!
I have seen several other builds on his own channel, he is a phenomenal fabricator and the best part is that he does it all without detailed plans and drawings, he visualises everything in his head, then measures it and makes it as he goes.
Crafting a vehicle without professional expertise raises safety concerns, as structural integrity, stability, and other critical factors may be compromised.
Perhaps this is the best idea I've ever seen on RUclips! The way you executed it and brought such profound meaning is truly admirable. Thank you for your dedication!"
Clearly that chunky little buggy was the perfect match to the different surrounding terrain. Probaby has very good carrying and towing capacity too. Fun to watch it take shape. Thsnk you 👍👍
Hello DonnDIY, you are a real HERO for all youngsters and the way you created this vehicle is really awesome. in your hands, an unused vehicle has been given a new life. congrats to your hard & smart work...👌👌👌
Well done, mightyly impressed, not only in design but also very well proportioned. Not a stone left unturned. And the repurposing of materials, alas, the cuts and placements, so economicaI and not overdone. I can almost bow to this man like a King.
ike this that humanity needs, the guy is a scientist, mechanical engineer, electrician, turner, manufactures parts, the guy does everything, NASA needs to know this man. 37
Even if I had the tools, which I don't, and the skill, which I don't, and the imagination, which I don't, you would still need the discipline to finish it, which I don't :P Great Job
Individuals without prior experience in automotive engineering may lack the knowledge needed to address complex issues, increasing the likelihood of errors.
Sustaining motivation and focus over 1000 hours may lead to project fatigue, diminishing the quality of work and increasing the likelihood of mistakes.
did the original creator give permission to you to download all of the episodes of him making the 4x4 and allow you to put it into 1 video and upload it for you to make free money from his 1000 hours of work on his build and videos? i doubt he did.
The extensive hours spent crafting a vehicle may contribute to environmental concerns, especially if the materials and processes used are not eco-friendly.
Да уж, этот момент действительно приводит в ступор. Но когда понимаешь, что это покраска, прям слеза подкатывает. Парень перфекционист без компромиссов.
@@shastjemojo о да, я даже подумал что он просто решил прокрутить видео назад с самого начала, а потом так круто, я даже думал что он раму побольше хочет сделать и поставить на неё машину, сделать Бигфут!!! Но это тоже круто!!!!
Хорошая работа! Для покатушек самое то. Мастер на все руки! И сварщик (в том числе TIG), и слесарь, и маляр, и разработчик (AutoCAD, SolidWorks, Kompas...), и электрик, и оператор плазменного раскройщика... И, похоже, фермер!) Возникло несколько вопросов: 1. Геометрическая проходимость? Была такая задумка или создавал из того, что было? Дорожный просвет мал, ходы подвески малы, диаметр колёс мал. Для такого веса проходимость хороша. А будь снега побольше, даже при таких узких колёсах и при таком малом весе думаю, закопается. Глубина преодолеваемого брода очень мала. 2. Рычаг переключения передач поместил в крайне узкую нишу. 3. Видны просветы в моторном щите. Грязи налетит. А в целом!!! Супер!!!
Ролик хороший.....но с таким оборудованием как у вас...можно было сделать ракету....я в свое время делал баггги в гараже имея только сварку и болгарку ....
My first view of this channel. My grandfather would have loved this channel. During the last years of his life he made sawmills and woodlathes from junk. He made the first cotton picker. It was wicked looking.
ну а еще ход подвески маловат и блокировок нет никаких (но понижение достойное вышло). Но для задач, показанных на видео, в России проще Ниву использовать)
Salmos 42:11 NVI Por que está tão triste, ó minha alma? Por que se perturba dentro de mim? Ponha a sua esperança em Deus, pois eu ainda o louvarei. Ele é o meu Salvador e o meu Deus!
The practical buggy turned out to be just super! You did a great job. Engineering works very well. It also turned out beautifully and neatly. It was interesting to watch. Thanks for the high-quality video!👍
@DonnDIY is a genunine master of engineering and building his own vehicles from scratch. Check out all his mind-bloqing projects on his channel! www.youtube.com/@DonnDIY
The man actually replaced the factory body with a homemade one. Uncle, you're obviously not very smart.
Q@@blackstorm2919
Унас в россии в архангельске в частности подобные и даже гораздо круче вездеходы и плавающие и болотоходы делают в гаражах многие любители для северов и не только колёсные но и гусеничные тоже
Привет любителям я из 29региона Россия если интересно могу скинуть фото и не только гораздо более крутых самодельных вездеходов у нас целая индустрия в области снего и болотоходов как колёсных так и гусеничных с потрясающими возможностями включая водоплавающие 😅😊😊
@@АлексейПолегенько-г5х ...И я уверен, на него можно даже поставить красивую 125-мм пушку, верно? 😉😎😂
I’ve seen many, many DIY guys on UT, but there is only one DONN DIY. That young man is quite famous in his native Estonia, but no doubt he will soon be famous all over the world!
Уже 👍👍👀
Get f*cked
This isn't a religious channel.@RepentandbelieveinJesusChrist0
Um idoso kkkk
Jaa, kuskil miskit toimub... Eestlased. Btw we are all kind of like that in Estonia. Near my fifties now I grew up there appreciating a few what we had. We built our own toys all the time.
Estonia?
What the fucking shit?
Where is it?
Sensational, it's people like this that humanity needs, the guy is a scientist, mechanical engineer, electrician, turner, manufactures parts, the guy does everything, NASA needs to know this man.
why? Maybe he doesn't give a shit about NASA. Also, this is the worst thing for humanity
Not trying to take anything away from the guy but I haven't seen any engineering in this video. I didn't see him once sitting down at a computer or with pen and paper doing math.
@@RoonMian There were numerous parts cut on a plasma cutter.
Now, these are not done by hand. You DO NEED to operate a CAD software that works with the plasma steel cutter. So, there's the math, the computer and the design.
@@RoonMianAlso i seen crazier stuff on the DDE channel or other car channels! Not that what this dude does inst impressive...
@@SoloBench it is not. jack-ass
Вот это золотые руки супер😊👍золотым рукам цены нет долгих лет этому человеку .
And £250k lying around in the bank!
Well done son. This old man (75) would love to have a cup of coffee with you while you walked me through this video. This kind of project keeps the mind alive.
youtube.com/@donndiy?si=ZfZX4Q7ebuMDJN-O
Unfortunately the guy that posted this is not the original creator. This guy just rips off other people’s videos to make money off their hard work !!
Великолепная работа! Мастерство на высшем уровне! Да и сам ролик снят мастерски. Смотрится на одном дыхании. Браво, Мастер!
а что тут великолепного? Чел сделал низкую багги. Крч та же машина без обшивки... С таким же успехом машина проедет.
@@бЛИН-г3рUmělče a ty si někdy něco takového postavil???
The prolonged hours of work can exert significant physical and mental strain on an individual, posing health risks and negatively impacting overall well-being.
Один вопрос, почему в профессиональных "багги" труба применяется круглая, а здесь прямоугольная? Разница есть в жесткости конструкции?
@@vladimirivanov7832 да, квадратный профиль на ровной стороне будет рваться
this man is a real automobile factory, he is also left-handed, well done dude and respect.
My grandma said NEVER trust a left handed person.
That is simply amazing work that you did. So many diverse talents that you have in order to look at, figure out and then build it. Steering, axles, instrumentation, exhaust, motor, clutching & that fantastic frame work. I'm in awe and jealous.
Не завидуй,тк зависть это грех....😢
This video was taken from Donn DIY channel, nobody here did any of this work.
Вызывает удивление количество разнообразного оборудования, в простом с виду гараже. Не на каждом производстве все это есть. А вообще МОЛОДЕЦ.
Это Америка,чувак!
У этого дол6ойо6а есть ПЛАЗМОРЕЗ! А он хуинёй занимается, делая этого багги-переростка из тяжеленных профилей! Эта дура полторы тонны небось весит теперь! А мог бы весь корпус сделать несущим из тонкой стали. Полтонны сэкономил бы.
@@user-nl2vc2mw5v the guy is in Europe (Estonia I believe).. the Peugeot vehicle shouldve been give away, we don't get those in the US
@@user-nl2vc2mw5v нет, это Эстония. Смотрю его третий год 👍👍👍🔥🔥🔥
@@user-nl2vc2mw5v, Эстоннияаа, чуваак !😂
I have built or restored about twenty vehicles in my lifetime. But my hat is off to this man. He has some crazy skills.
....一一一..一..'广一※…鬯**逍※返rd?y":璷※飚濔轓谜遯※*博「
一域蜘c/*爀:搬.…
-_'凼粸:
#❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤？
...Молодчик!!!👍👍👍
Респект Мастеру-золотые руки....и,конечно,светлая голова...
А хейтеры,пускай идут лесом...
Молодчик здесь не у места.
"Гарри, а давай сделаем монтаж" (к/ф Человек с бульвара Капуцинов). Потрясающее видео, где все гладко и четко. А за кулисами его монтажа стоит просто титанических труд измерений, подгонок, переделок и др. Я в шоке. Десять лайков❤
Не потратил 1000 часов, а со знанием дела проделал хорошую работу приобретая от жизни бесценный опыт всего-то за 1.000 часов.
Когда что-то делаешь для себя то и делаешь это с удовольствием и это не считается что ты что-то потратил.
Супер, Молодец, Мастер от бога, таких мало, Браво!!!
таких много
@@koro_navi_rus, даже в России есть чуть-чуть !
А тут - Эстония !!!😂😂😂
Во первых в видео ролике не показана инженерная работа. Все детали как бы сами собой делаются по выкройке. В кадре даже штангенциркуль не разу не показали. Еще у парня слишком чистые руки, как будто он их специально моет после каждой операции с деталью.) Если вся сборка делалась по чьим-то чертежам, то времени 1000 часов может и хватит, в противном случае это чистое надувательство одного из автослесарей.)
@@АндрейСоболев-о8у иди ты там же где русский военный корабль
@@tekknoratИди нюхай сраку Байдена💨!😆🤣😂
Оооочень достойная работа проведена,да с таким качеством! Мастеру респект!
Мужик просто молодец!!!Настоящий мастер,собрал вездеход один....Золотые руки!!!!Таких вот инженеров нужно привлекать на производство.....
Там мотор рядом, не холодно, можно сделать от мотора подогрев сиденья и кокпита - не помешает.
Отлично снято и смонтировано - можно смотреть для поднятия настроения - чистый позитив. 👍👍👍
H100 motoruda sofor koltugunun altinda titresim ve yazin sicak olmasi disinda sorun yok. Off road aracinda titresimde sorun olmaz zaten
Hello from Norway.🙂 This must be the best DIY 4 wheel drive vehicle I have seen made. Craftsmanship and the way donor parts are used, took this build to a very high level. I believe this nice build will last for many years, since quality of parts used, and welding work of the thick steel used, makes this build super strong. I liked how you used the plastic and rubber to form the shielding and the roof. In the end you made it look like a fabric build from a famous brand. The power from the large donor engine, looked awesome. I liked watching the build video a lot. Thank you.👍
I'd like to see him do something like a 6 wheeled offroad vehicle
I looks like you haven't seen normal diy offroad cars.
Что-то я не увидел красоты в этом багги !🤨😒
However, I had to laugh when reading how much attention was given to the environmental impact in the subtitles. It's not as if everyone is going to take on projects like this.
@@pavelbaukin213
Потому что праворукая
I am sure this was not done in just 30 minute. But the amount of talent and skill that you demonstrate in this build up, is out of imagination. No talk, No BS and just pure skills. Job well done mate.
you're right, he actually did it in 48 minutes which is a lot less impressive if you ask me
it was made in 6 months =1000 and some more time editing the video
@@Peacfull dude.... never mind
I enjoyed this DIY far beyond any that I have seen before. What a vehicle and what an amazing use of resources!!!
Building a vehicle over an extended period can incur substantial costs, potentially straining financial resources without a guaranteed return on investment.
DIY may never be a return of investment :D @@NationalFarmingDocumentary
@@NationalFarmingDocumentary dude you are really weird with all your negative comments. you must be the blast of the party. why are you so envious.
@@itstheotherwhitemeatYes!!! That Go Tech is a very negative sorry arse. What a Loser.
@@NationalFarmingDocumentarylồn
Однозначно этому парню надо работать в конструкторском бюро, все очень грамотно собиралось чувствуется, что все тщательно обдумывалось. Молодец удачи тебе парень.
You are a master of engineering!!!
I respect such people!!!
With regards, Alex from Ukraine!
так он же из России, чего ты по-английски пишешь)
Awesome! Using OEM car parts saves time, money and engineering headaches. Plus, they last a really long time and are very strong. I like the way you think. That UTV looks bulletproof! Great job.
Besides the incredible engineering, I can't applaud your video coverage enough. Took the right angles and makes it easy to follow
A designer, engineer, mechanic, fabricator, welder, auto-electrician, film producer and editor ......... if that isn't an impressive range of skills, I don't know what is! Really enjoyed watching this.
Not designers , sorry ! 😒😞
@@pavelbaukin213 Why do you think that there are no elements of design work in this project?
Доброго времени суток!С искренним удовольствием посмотрел Ваше творчество!Вы реально молодец!Здоровья и благополучия желаю Вам!
Dude! You are my hero! I am way beyond the suitable years to go do this sort of thing myself but after watching you, I am content to just sit back and enjoy your outstanding ability. Good on you and keep the videos coming!
Wow! I am impressed! I really enjoyed watching the video from start to finish. Knowledge, skills, and experience that he has. Keep it up Donn! Greetings from Arizona.
good work and great art. thank you for showing a good example to young people around the world that if we want we can. a big thank-you
And older young people 😊👍
Этот мужик просто гений,мастер своего дела,отличный инженер.🤝💪👍
What a vision to build such a thing. If the apocalypse ever happened without people like this who survive we are doomed.
Congratulations. Huge patience, excellent knowledge on the car and a video documenting the build in detail and explaining exactly what parts were needed to complete the new vehicle. The video has been seen over 2,000,000 million and only 16 thousand likes. If it was any chick it would have likes as many views. This is everyone's right, but you are doing injustice to the video and especially to the protagonist who, in my opinion, is more than entitled to it. Well done to you!!!
update after 14 hours: 23k likes
Прекрасная работа, респект мастеру !!!!!!!
I have seen several other builds on his own channel, he is a phenomenal fabricator and the best part is that he does it all without detailed plans and drawings, he visualises everything in his head, then measures it and makes it as he goes.
Awesome skills ! Great project. Congratulatin Donn !!!
Crafting a vehicle without professional expertise raises safety concerns, as structural integrity, stability, and other critical factors may be compromised.
@@NationalFarmingDocumentaryobsess much ? Loser Finkle is Einhorn
Perhaps this is the best idea I've ever seen on RUclips! The way you executed it and brought such profound meaning is truly admirable. Thank you for your dedication!"
Заряженный специалист! Ручная сборка аппарата,, даст покурить любому заводу изготовителю. Качество👍
как котлету для покатушек сделать - куча инфы есть более грамотной в разы!
Excellent work. You are a genius man who deserves appreciation and respect. We wish you more progress and success.
Clearly that chunky little buggy was the perfect match to the different surrounding terrain. Probaby has very good carrying and towing capacity too. Fun to watch it take shape.
Thsnk you 👍👍
Donn, you are indisputably the best - what a build!
Hello DonnDIY, you are a real HERO for all youngsters and the way you created this vehicle is really awesome. in your hands, an unused vehicle has been given a new life.
congrats to your hard & smart work...👌👌👌
To see a man creating with such diverse talents is a thing of beauty. Amazing work, extremely satisfying. Well done Donn!
Не просто Супер мастер! Я думаю, если наберёт команду, они все смогут очень хорошо зарабатывать и дарить людям радость! Удачи тебе Мастер!
Он , походу , и так не плохо зарабатывает , судя по его инструменталке !😅😊
Для сельпо самое то.
kotllf
Лучшее, что я видел за последнее время.
Золотые руки ❤
Well done, mightyly impressed, not only in design but also very well proportioned. Not a stone left unturned. And the repurposing of materials, alas, the cuts and placements, so economicaI and not overdone. I can almost bow to this man like a King.
Самодостаточный Человек !!!
Смотрел на одном дыху !!!
Он опять доказал, что для человека нет ничего невозможного !!!
Пожалуй одна из лучших конструкций! Понравилась прочность в каркасе и шикарные колеса от трактора 👍.
Супер!
This man is genius
The commitment of significant time and resources to a single project may hinder the pursuit of other valuable opportunities and personal growth.
Go tech18..you are a complete idiot!🤮 go back to la la land where you belong!!🤮🤧😵
ike this that humanity needs, the guy is a scientist, mechanical engineer, electrician, turner, manufactures parts, the guy does everything, NASA needs to know this man.
37
👌👌👌👌👌👌👌👌👌👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Genius, I'm a little jealous of his abilities. Amazing stuff.
Well done young man. What a fantastic build. and having all the tools. and the knowledge. I'm looking forward to see what you do next.
Este video es robado y resumido
Нет слов. Прекрасная работа и светлая голова. Жму руку!
👍👍👍👍👍💯🌷
Oh man, this is the best job I've seen. You're a genius, congrats
Even if I had the tools, which I don't, and the skill, which I don't, and the imagination, which I don't, you would still need the discipline to finish it, which I don't :P Great Job
Eu amei sou do Rio de Janeiro Brasil
الله يعطيك الصحة
He understands Arabic 😅
As they say: "when things go bad..." With Noraly everything ends with a big smile!!!😄😄👍👍👍
You're commenting on the wrong video! 😀 Noraly's story about Alaska swimming in Congo is the previous one..
😄
As an engineer I´m deeply impressed. Keep on going!
Pekalongan, Central Java, Indonesia... Success for "Quantum... ".... 👍
Donn asal nya org indonesia .. Mari kita claim donn bersama..🤝 Done claim!
Great Build...? I enjoyed every minute of the video, and can hardly wait for your next build.. Cheers...!
This film makes me something start over…thanks guys ❤
Wow .......finally someone on utube who knows how to fabricate & weld 🎉🎉
Individuals without prior experience in automotive engineering may lack the knowledge needed to address complex issues, increasing the likelihood of errors.
A very talented Guy!
Sustaining motivation and focus over 1000 hours may lead to project fatigue, diminishing the quality of work and increasing the likelihood of mistakes.
This guy has amazing knowledge and abilities .
did the original creator give permission to you to download all of the episodes of him making the 4x4 and allow you to put it into 1 video and upload it for you to make free money from his 1000 hours of work on his build and videos? i doubt he did.
RUclips allows that.
@@skanderchida9174 yeah well it shouldn’t be allowed. It’s theft and it should be treated as it
@@UnwellGaming
🤫
@@bigdog2084😁🤣 it is what it is at least the content is getting out.🫣
Just take this video and post it on your channel and wait for the 15million views and profit
sometime words aren't need. beautiful work
Extremely well built quite a bit of attention to details .Very nice work. Such a satisfying video.
Thank you for the update, Quantum Tech HD..!! Amazing transformation..!!
Incredibly gifted young man.
On my time in Eastern Europe most men are as capable as an experienced car mechanic in the UK by far 💯
هذا لاقالولك يعرف يرهّم ويشتغل صح وكل الوسائل متوفره عنده ماشاء الله والمخ شغل ولا غلطه 🇸🇦
I envy this pure skill and complete workshop.
The extensive hours spent crafting a vehicle may contribute to environmental concerns, especially if the materials and processes used are not eco-friendly.
Go tech 18..go take your Cafe latte nonsense elsewhere you muppet🤮😵
Baştan sona izledim tebrik ederim bravo 👏👏👏
Не плохая Багги получилась. Не хуже заводских экземпляров.
Жесть, когда ты всё сделал с машиной и начал её разбирать: у меня чуть сердце не остановилось! Не пугай так больше!🫡🫡🫡🫡🫡🫡
حتى أنا احسست بالفشل مكانه ....لكن هو يظهر عليه العزيمة والشجاعة
Да уж, этот момент действительно приводит в ступор. Но когда понимаешь, что это покраска, прям слеза подкатывает. Парень перфекционист без компромиссов.
@@shastjemojo о да, я даже подумал что он просто решил прокрутить видео назад с самого начала, а потом так круто, я даже думал что он раму побольше хочет сделать и поставить на неё машину, сделать Бигфут!!! Но это тоже круто!!!!
Absolutely perfect engineering. Perfect.
Two things..
1. You should leave bigger clearance
2. You should put some stronger engine (wv tdi for example)
Number 3. You should butt out
Кучу нервов И 100000 рублей на его запчасти! Браво!
Хорошая работа! Для покатушек самое то. Мастер на все руки! И сварщик (в том числе TIG), и слесарь, и маляр, и разработчик (AutoCAD, SolidWorks, Kompas...), и электрик, и оператор плазменного раскройщика... И, похоже, фермер!) Возникло несколько вопросов: 1. Геометрическая проходимость? Была такая задумка или создавал из того, что было? Дорожный просвет мал, ходы подвески малы, диаметр колёс мал. Для такого веса проходимость хороша. А будь снега побольше, даже при таких узких колёсах и при таком малом весе думаю, закопается. Глубина преодолеваемого брода очень мала. 2. Рычаг переключения передач поместил в крайне узкую нишу. 3. Видны просветы в моторном щите. Грязи налетит. А в целом!!! Супер!!!
Это проект для видоса и не более)
U r professional man
للأمانة أنه معلم ومبدع 💪👍
Ролик хороший.....но с таким оборудованием как у вас...можно было сделать ракету....я в свое время делал баггги в гараже имея только сварку и болгарку ....
This is Donn DIY's video. This isn't the original upload
We work the same way.. oldskool angle grinder and oldskool welding machine!!.. free vodka for you my friend!!..
Зделайте лучше и покажите)))
Еще вал прямой передачи! Для прицепа с приводом?
My first view of this channel. My grandfather would have loved this channel. During the last years of his life he made sawmills and woodlathes from junk. He made the first cotton picker. It was wicked looking.
Молодец Дон!
Молодец , что скажешь! Руки золотые!!! Но тяжёлый получился "трактор", думаю пахать на нем хорошо будет! По бездорожью тяжёл он!
А зачем в топь лезть ,
ну а еще ход подвески маловат и блокировок нет никаких (но понижение достойное вышло). Но для задач, показанных на видео, в России проще Ниву использовать)
massive respect to this guy,i would love to do something like this but wouldnt know where to start
Приятно что молодой парень из эстонии может утереть нос даже некоторым автопроизводителям! 😂💪👌✌️💥
Гениально!браво мастер🙏👍☝️🤝✊️✌️🇷🇺🙌
Salmos 42:11 NVI
Por que está tão triste, ó minha alma? Por que se perturba dentro de mim? Ponha a sua esperança em Deus, pois eu ainda o louvarei. Ele é o meu Salvador e o meu Deus!
Xe đẹp và ngầu quá
Absolutely brilliant best video yet
This man’s work is impeccable!
I always learn something new from your channel. Your step-by-step guides are so helpful for beginners like me!
It’s wonderful to see such talent in the next generation. Very nicely done
You have come a long way since I first watched you build that sawmill in your old shop before the renovation. Great!
OMG...WHAT A BRILLIANT MEMORY THIS PERSON HAS
Your The Man! No Doubt 👍👍👍Thanks!!!
exeptional skill in all fields of the build,one of the best and enjoyable videoes ive seen . genious
This is an example of a amazing design and workmanship.
He obviously has an insane level of skill, and I love what he put together. Excellent video…Thankyou!
The practical buggy turned out to be just super! You did a great job. Engineering works very well. It also turned out beautifully and neatly. It was interesting to watch. Thanks for the high-quality video!👍