Painted Hit & Miss Fence & Gate construction VLOG #2 | Bacren Fencing
HTML-код
- Опубликовано: 10 июл 2024
- (VLOG #2) Another fencing VLOG, this time a fully painted 6ft Hit & Miss style timber fence with Gate. Here I show the basic process of building and painting a Hit & Miss / Shadow Board fence. This is a typical day in the life type video when working within my fencing business - Bacren Fencing.
I hope the video is of some interest and if it is and you would like to see more of this type of content, please let me know in the comments and I will produce more of the same content going forward.
Thanks for watching !
timestamps
00:00 Introduction
00:59 Getting posts in
02:05 Explaining the painting process
04:42 Completed job and run through of final fence
06:30 Outro
Disclaimer - The Amazon link is an affiliate link and I may receive a very small commission if the item is purchased through the link, but it does not cost you anything. This helps support my channel and enables me to keep posting free content on a weekly basis.
LINKS To all the production equipment that I use -
MOVAVI Editing software that I use - store.movavi.com/order/produc...
RODE Smartlav+ AUDIO Lavalier Microphone for smartphone - amzn.to/3dSLN2h
RODE SC1 Microphone extension lead - amzn.to/366jrih
DJI OSMO 3 GIMBAL - amzn.to/3bAM4VX
JOBY GRIPTIGHT phone holder - amzn.to/2z6Hj9x
70" Camera tripod - amzn.to/2z35qpx
Epidemic sound music and sound effects - www.epidemicsound.com/referra...
Tubebuddy software for new youtubers - www.tubebuddy.com/BACREN73
You can Donate to the channel here if any of my videos helped you in any way, this would be highly appreciated and also help me grow the channel in future paypal link paypal.me/bacrenproperty?loca...
- Thank you !
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
#bacrenfencing #hitandmissfence #fenceinstallation #fencebuild #buildingfence #woodenfence #cuprinolducksback #paintingafence #fencingbusiness #gardenfence
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com 
Хобби
Just starting to film some selected fencing VLOGS as I go about my business. It is not always possible to film but I will film as many as I can going forward. Hopefully it is of some interest and here is the first one I done - link to FENCING VLOG #1 - ruclips.net/video/z79HQO0GD5g/видео.html As always, thanks for watching ! Take it easy !
Thanks again for the video - I've watched the video before when you attached a 4 x 4 to a wall. The back of the bottom fence looked very well in the sunshine, ironic after the downpour...
Thanks Ian, yes the fence paint turned out well considering the weather, but it was actually quite warm, so the paint was drying fairly quickly. That thunderstorm only lasted a few minutes thankfully ! Thanks for the comment 👍
👍👍👍
Thanks Pete 👍
I just paint all the wood first before constructing the fence and I use creocote, much better protection
My original plan was to do that, but always struggle for time due to other projects, so had no option but to do it whilst on the job in this case. Also saves double handling to some extent. The client specifically asked for Cuprinol Forest Oak on this particular job as that is what the rest of the fencing and garden furniture was coated with. I have not used the new style Creocote before - is it any good now that all the nasty chemicals have been banned from standard cresote ? Thanks for the comment 👍
Double handling is a good point. If you're running a business it's not the most efficient method. Creocote is still messy, stinky, sticky stuff but it soaks into the wood rather than forming a layer like the water based crap that pervades the market. It means you don't have to repaint every year or two.
Nice job. Do you ratio of slat width to gap or do you just use a fixed gap width?
Must admit I creosote all my fencing, old skool lol.
Thanks, I always use a set gap for the face of the fence (i.e the side with no posts) in this case it was a 32mm gap (old bit of fence rail that I use as a spacer). On the rear side of the fence I just centralise the slats by eye because if you use a spacer again, you can end up getting "creep" where by the time you get to the end of the fence, slats can end up way off centre.
It is rare that I paint fences for clients but in this case it was an elderly lady who lied alone, so I felt obligated ! Thanks for the comment
Cracking video! What Dewalt reciprocating saw model do you use?
Thanks Stuart, I use the Flexvolt 54v DCS388 model - it is awesome. I have the 18v version as well, but the 54v is SO much more powerful and perfect for fencing. Thanks for the comment 👍