2020 - 2022 Ford Explorer 2.3L Oil Change & Air Filter
HTML-код
- Опубликовано: 19 янв 2022
- Work was performed on a 2020 Ford Explorer with a 2.3L 4-Cylinder EcoBoost.
Tools needed:
15 & 7mm sockets
Oil Filter wrench
Wheel ramps or jack stands
Oil Drain pan
Supplies:
5w-30 Full or Synthenic Blend motor oil (or 0w-30 for Cold Climate) 5.2qts or 4.9L
Motorcraft oil filter #FL910S
WIX Air filter #46935
Oil Plug if needed - Dorman Drain Plug #65430
Don't for get to check for leaks under the vehicle from the drain plug or Oil filter after install. - Авто/Мото
Good video, appreciate you making it for another first oil change on a new car. I am more worried about the Walmart brand oil you are using. As long as it is your car and not a customer’s, I’m all for it. Thanks man.
Oh, the plug is looks the same as my GMC. The specs on my GMC is 20 Ft lbs, for anyone wondering.
Good video. I needed wrench sizes and sound proofed removal info. Thanks again!!😀
Thanks! First oil change on my 2022 Explorer. Now I know what to expect.
Super easy
Great Video. Thanks for posting!
Do you recommend an oil separator for the 2.3 EcoBoost? I know someone who has one on theirs and they get quite a bit out of it.
Anything boosted or with high compression should run a oil separator. Especially anything with direct injection.
@@nicklldoit ....Thank you!!
I've seen it recommended that you remove the catch can in the winter if you live in a cold climate.
@@andyd5492 .....Good to know....thank you!!!
Finally picking up my 22 on Monday!! How much oil did you put in? Supposed to be 5.1 quarts I believe.
How many miles in between oil changes?
I personally have a 5k rule, you can go up to 10k. But I would check the level and condition of your oil between 5k to 10k. Must use full synthetic oil.