Chelsea was one of my best friends. We went to college together and happened to both discover a love of climbing separately in the years after. She climbed so beautifully and effortlessly - I was always simultaneously jealous and in awe of her. I usually made her lead. In addition to being stronger and more graceful, she was braver. Too brave. She’d lost her mother to lung cancer the year before and climbing was how she dealt with the grief. She would have been 35 a few weeks ago. There were so many trips we wanted to take, Red Rocks, Smith Rock, Squamish... I’ll miss her always. Climb safe everyone.
It is worth pointing out that cord is a lot less problematic than slings. Cord has the core protected by the sheath, therefore the core is not exposed to UV. Slings are thin, do not have a sheath and every strand is exposed, making them degrade a lot faster.
That’s why I just don’t understand people who are against bolts for these specific reasons. How are a couple tiny bomber bolts that will last for years and years “more impactful” than rat nests of literal garbage that looks worse over time and degrades in the elements on top of being maintained by random people adding more material over time in a completely random and hard to keep track of way. How anyone can look at bolts and think “That’s unnatural and looks terrible!” and then look at big piles of degrading plastic tat and think “Ahhh much better” is beyond me.
@@moonti6820 Unpopular opinion from a clean ethics person. (Me) Decades, even if it's 50 years as a bomber anchor, doesn't take into account that in 300 years people will still be climbing. What are future generations going to say about our allowing people to "pave the vertical world"? It's a double edge sword because while yes, ima clip some bolts if they are there, but if they aren't then maybe I shouldn't be climbing the route if I don't have the skillset to protect myself properly or the huevos grandes to make it all happen. (Source: Climbed @ Whiteside Mtn NC for years)
The accident basically happened because they did not understand how climbing gear degrades. Teaching the limitations of gear is why I like this channel and would recommend to anyone starting out to do some kind of proper course rather than just learn from a friend who lacks knowledge or may do things wrong.
I don't understand how they didn't know if they were "experienced"... that was one of the first things I learned from this channel, and you'd think it would be common knowledge in the community even if they didn't watch this channel.
I think there's a lot to say about how soft gear is harder to visually inspect than hard gear. I was fully expecting that webbing to be white webbing, not green. And if I didn't see any fading or tears in "white" webbing, I would trust it.
@@StayCHilL24does any reputable manufacturer actually make white webbing for climbing use? I dont think ive ever seen it. Seems like that would be one of the reasons they wouldnt. If no one made white(ish) webbing, if you saw it, youd know its bad.
the thing is is that the sling when wet looked a lot more supple and strong too. that said i’m never rapping off one sling of dubious age and strength if i have one to leave.
@@StayCHilL24that’s what I’m saying. I would have thought that was a white sling, inspected it as such, and probably met the same fate. Whenever inspecting soft gear my first thought is “how fuckin old is this thing?”
Yes, RIP to those two climbers, who were young and had their whole lives ahead of them, but thank God that divine rock wasn't defaced with a 1/2" diameter steel bolt, making some crusty old f$%ks on Mountain Project upset because people can now safely repeat a heroic first ascent from (checks notes) 1936.
@@YetAnotherAaron I looked it up - a 4-pitch 5.4, so they probably just ran it out. MP suggests there's controversy on whether to descend or rap. IMO it's these beginner routes that need proper anchors - tons of traffic, people not ready for every situation, easy to get over-confident.
@@IronJohn755 They were on a 5.8-5.9, not the trough. The issue is it's not a rappel station, it's a place to bail from (just as if you had to leave some nuts to bail mid pitch). And you don't even belay from that tree on the way up, you belay about 10-15 feet left. I totally agree that if it's a rap station, it's probably better to put two bolts in. But I can't advocate for putting bolts in everywhere you could possibly belay/rap. The tat should've been removed long before they got there
In Tree climbing, we use retrievable ring on ring friction savers that would be basically the same as what you are using for slings. Consists of a large anchor ring on one end and a small anchor ring on the other. Put the rings together then put your rope through. You can either lower yourself using moving rope system / doubled rope technique, or you can put an alpine butterfly to stop against the small ring, put a carabiner in the loop so it doesn't close, then repel on single rope technique / stationary system. Have to make sure you have enough rope on the butterfly end to touch the spot you are repelling to in order to retrieve. To retrieve the friction saver, either put a stopper knot or a retrieval ball on one end of the rope and pull the rope down. The knot or retrieval ball goes through the big ring but catches the small ring and it pulls the friction saver out. For controlled retrieval, we use throw line by tieing it to the stopper knot / retrieval ball end. The throwline follows the path of the large ring, which is pulled around the backside of the trunk / limb. Have to pay attention to whether or not the big ring fits through the union on the tree you are using so it doesn't get stuck. For Stationary rope there is a variety of different ways to do a choker around the tree with your climbing line that are retrievable, as simple as a butterfly fly knot by it self, or a bit more complex as a floating ring with a midline stopper knot. Probably too much friction for anchoring to a boulder, but might be useful for anchoring to trees, depending on how far you are repelling / lowering yourself.
I am a tree climber, rock climber, and SAR tech. I built my own cambium saver out of two differently sized forged aluminum rings, some 1" tubular webbing, and a champagne cork w/ a bit of cord for the retrieval ball. It works great, cost nearly nothing, and can be made to whatever length you need it. Now I can rappel down on DdRT and retrieve the anchor with the cork if I have enough rope, or rappel down on a blocked SRT and retrieve the anchor with my throw line. TLDR: buy or make an arborist cambium saver, and carry that along with some throw line in a chalk bag.
I am old and I no longer climb but my younger family members do. They are all super environmentalist and when I tell them that back in the day bolting a route was considered pretty criminal they just don’t get it. They ask me how did you climb long run outs. Well those routes were reserved for people who climbed at a completely different level. The words “ sport climbing” were never used. You either top roped or you led the climb. We never left all kinds of crap around a tree and I would have never clipped into anyway. It’s common knowledge how the sun damages synthetic fibers and any fibers for that matter. It’s the same reason you avoid setting your tent up in the direct sunlight. I wish I still was young and climbing. I think I would really enjoy just clipping in and using all the new gear. It looks great. Safety is always priority number one or it is for me. It really good that there are channels like this that can spread the knowledge. You actually may have saved a few lives. Take care
well 61 here and I'd say i haven't stopped climbing yet but also totally agree with what you said about "either top roped or led" I have seen so many people try climbing on the rock like they climb in the gym LOL, usually with some consequences of falling all over the place.
At Seneca Rocks in West Virginia where I learned to climb the guides would maintain the rap stations with trees and would use 11m static rope run through black tubular webbing with two rap rings. When the black webbing lost its color it was time to replace the anchor. I wonder how strong the rope under the webbing would be? The idea being the webbing would take the UV damage and protect the rope.
Very sensible solution, to only upgrade to that system I would recommend is including a date tag possibly inside or just attached to the webbing. That way anyone could inspect it and replace at set intervals of Xyears rather than relying on visual inspection.
Is the entire rope encased in the webbing and then tied off, webbing and rope together? Or does the webbing protect most of the rope but the knot is exposed?
Former SAR high angle guy here…good video. Also good to hear that people are starting to pay attention to this, the fact it’s trash in the environment. It’s easy to confuse left gear with trash.
I lost my best friend to this in the Alps. He was a phenomenal climber, well known and very experienced, but three old sun baked pieces of tat failed and he fell several hundred meters. In the alps and in the US Ive often come across thick wedges with multiple sun baked slings - I normally cut away the oldest and replace with new. As an amusing aside, about 12 years ago I removed a shoelace and titanium rap ring that was on a shrub from from Officers Gulch (near fresco), I was bimbling about on the ice during a drive home and it melted my brain in so many ways… a shoelace. Well it makes me laugh
A critical bit of info about both of those accidents is that they both happened when the slings were wet. This probably didn’t decrease their strength but it DEFINITELY made the slings look newer. Read the American Alpine Club summary of the JTree accident
I know nothing about climbing, caving, or canyoning. As someone who enjoys watching content related to these things, this has opened my eyes much more to the ideas of safety, redundancy, and environmental impact of many people tying off to the same points for their journeys through nature. Thank you!
Frankenjura: cutting slings if they look too bad. Take the shit you don't trust with you and leave good stuff or rappel with nothing left behind. I hate leaving stuff behind. As i don't trust other peoples slings and so i don't want anybody to trust mine.
Agreed. In Norway, where I climb, we are taught to cut slings and ropes that are left behind (and throw it in the trash) as we do not know how bad they are. Only steel anchors (not your own) are used for the rappels. If you have tobail and rappel on ropes or slings then you sacrifice your own gear that you know the history of. No way I will trust my own life to some random sling when 5$ worth of gear can be sacrificed.
It really depends on your style of climbing. Here in the Alps, there are plenty of bolted climbs and rappel routes. However, when mountaineering and alpine climbing, these rat nests of a bunch of old slings and cords are pretty standard, even on most popular 4000ers. Leaving behind one of your own slings/cords on every rappel is not really feasible when rappelling 10 times in a row. Also consider the amount of trash created when everybody cuts the sling of the previous parties. However, that does not mean that I would just rappel off any sling I find in the mountains. If there are many pieces, they will hold. After all, 5 slings with 3kN is still more than enough for rappelling. Also, cord will be a lot safer than slings as the core is protected. If there is only a single piece, it should be backed up by your own gear. And even if you do not want to leave anything behind, create a cold (non-weighted) backup and have the heaviest guy in the party go first and thoroughly bounce test it. If there is any doubt left, leave your backup piece as well.
@@foobar9220 5 slings @ 3kN each is hilarious to me hahaha, sorry. I am a caver in the USA, and it is very rare that we find old nylon anchors underground, but not uncommon that we find permanently rigged ropes attached to (hopefully) all stainless steel hardware. Since there is no UV underground, some of these ropes are decades old and still pull test to 50% MBS (50% of 30-40kN is amazing for our forces). But what happens in our community is that permanently bolted anchors can be really bad- galvanic corrosion is incredibly fast underground, and sometimes you find really shitty bolted routes. Like you should never rappel/climb on a single bolt, and some people don't understand how to bolt in caves because we use static ropes, meaning you can shock load the entire system if a bolt blows out. So even with bolts, I've learned to be very skeptical- but it seems its not exactly the case in mountaineering/rock climbing?
And the biggest issue with this is that nobody truly knows what tat is trustworthy so people sometimes remove perfectly safe gear. A few years ago I built a bomber rappel station on a popular alpine route with a cordalette and 2 rappel rings, came back a week later and it was gone so either somebody took it for themselves or thought it was old and threw it away. Wasteful either way. That route fortunately now has some bolted rap stations.
Hey Ryan great video. My takeaways when making judgement calls when rappelling off of tat: 1. Check for discoloration of the webbing. If it’s cord, look for desheating and softness to indicate if the cord is coreshot. 2. If it’s webbing, check for crustyness/stiffness in the material. 3. Generally metal is okay. But look for obvious signs of distress and if there is a massive groove. Is there anything else I missed?
I love the emphasis on how we're semantically defining "impacting the environment," in terms of whether it's e.g. 2 secure bolts into a rock, or e.g. loads of old plastic (nylon etc.) cordage being left to dissolve into microplastics into the waterways and atmosphere. Great points.
So I come from a technical rescue background, I understand that the safety factors we use are way way above what sport climbers use. That being said, I look at it as if the protection should be replaced with new webbing, rope, whatever, every time. Your life is worth far more than it cost to replace sketchy gear. I can buy 100’ of tubular webbing for $40. If it were me, I’d cut the old stuff out and place new every single time if it was not literally witnessed being places. The other thought would be to sharpie a date on it. But again how long is too long? I don’t have the answers but it would give some idea.
In my brief expert google search the sharpie thing hasn't been debunked.. In 2002 Tests by UIAA was confirmed. UV is bad but unavoidable. @@Rancourt762
I've done some commercial rope access work too, and in every course they tell you not to use any marker pens on your gear or it won't be passed in the obligatory recurring safety checks, but of course you knew that right?@@Rancourt762
6:25 There's a strong chance that black cord from the Gunks was put there by me! Obviously I don't have the monopoly on black technora cord, but that was my leaver cord for a few years, a few years back.
One of my dear friends Bryson Allen was killed during a rappel anchor failure on thw mendenhall towers. I really appreciate you helping keep climbers a little safer during equipment critical moments. Bryson was 23, he was an incredible person and a joy to climb with. I hope all of you climb for many more years. ❤️
Years ago I found an old sling in a canyon in northern Spain. It looked OK except it was a little faded and the stitch block had been wrapped and covered with duct tape. I used to take it to classes, I was training vertical adventure guides, and would randomly throw it on the table along with a selection of various slings, some proprietary, some knotted, then ask people on the course to sort out what they would or would not use. Most people rejected a couple of knotted slings, tape with a tape knot and cord with a double fisherman's knot only on the basis they were knotted and were quite happy to include the old Spanish sling, even though it was faded and the duct tape made it impossible to check the stitch block, or even if there was a stitch block! When they asked me what I'd choose I would reply, if I didn't know their age and history, none of them!
I can’t believe the gear from the gunks was still strong because it looked so old. I’m new to trad climbing and seeing those slings always makes me nervous so I opt for bolted rappels but I’m glad to hear there are people trying to keep it safe.
I moved to the West Coadt just as the Gunks were starting to add rappel stations. The amount of tat that uses to be everywhere, rapped around trees, was truly frightening.
Sling from tape is the worst material to use, the way it weaves there is no part protected from the sun. Rope sling is far better as the core *should* never be in daylight, and if it is visible you can see there's a problem I installed a "sling" on a tree for others, I used heavy stainless steel cable and 2 stainless steel mooring rings on the cable so people can retrieve their rope (cable passed through some old hose pipe where it contacted the tree), I don't have to worry that someone will die because of an old sling I left, but it's expensive and a hassle to go and put it there.
Thank you for sharing as always! I’m part of a rebolting team in Belgium. We always keep safety aspects in mind when maintaining an area or when we’re developing a new one. Two small fixed anchors definitely do not stand out and are highly recommended
This is very common in the U.K. where bolt anchors on trad climbs are exceedingly rare. The BMC (British Mountaineering Council) volunteers do a great job of installing and replacing static rope anchors (around tree trunks) and have installed steel cable anchors at some popular crags. Nevertheless there are still lots of tat nests at the top of some climbs (e.g. on sea stacks).
Yeah I imagine I have rappeled off of some of those slings you were showing from the gunks. We are taught to check the quality of the webbing, mainly on crustiness/stiffness. Aside from the increased plastic, you can also see the wear and tear on the trees. Some routes have been replaced with bolt anchors, but it's a work in progress. I for sure prefer bolts and chains when possible.
I once noticed a frayed leg strap on a parachute that another jumper was putting on. After I commented how it didn't look good, he reached down and tore it in two with his fingers. Don't underestimate how material can weaken over time.
I would bet in the real world you're only really loading up 1 piece at a time because nobody is getting them all of equal length. So 1 breaks, you're on the next longest, it holds until it fails, and you're now on the 3rd longest etc
Yes, I’d like to see 3, or 4, or 5 tat pieces EQUALIZED for a test; call this the “best possible” (but unlikely ) situation. Then do another test of 3, or 4 or 5 pieces not equalized (typical) in which 1 at a time would get loaded and fail and load the next longer sling, etc (as detailed by @evangatehouse).
I've had to set up an emergency rappel one day, to get down the mountain before a thunderstorm would catch us out in the open. I'm sorry to have to admit that I did leave some rope and one carabiner out there. They were definitely not my newest and bestest. I can imagine leaving crap that's already old exposed to the elements and the UV rays at 3000 metres is indeed quite dangerous. I do hope the cabin keeper found someone to clean up my stuff, after I explained to them where I had left it.
Leaving stuff when in need isn't the issue. The issue is that these stations are expected and normal, but not always treated with the suspicion and care that they deserve.
I have a collection of shit gear that I've pulled off canyons and climbs. The shit gear isn't really the problem. The problem is that many climbers and canyoners aren't factoring in carrying replacement gear / sacrificial gear. A length of 6mm power-cord that could be used for 3 or 4 anchors is negligible in terms of weight, but most people don't have the experience to know they should be carrying it. We need to normalise the attitude of carrying spare, lightweight anchor material to replace or enhance the anchors used by the community. It may cost you $20 to replace the anchors on a multi-pitch climb, or a multi-abseil canyon, but it may save someone's life.
My rules of thumb: If I add a piece of tat, I cut out the oldest pieces of tat until there's only 3-4 pieces total If there's only one or two pieces, always add a fresh piece
Hey Ryan. Thanks for providing amazing content. Nerding out on this topic and virtually everything you’re up to is high quality information. Keep it up.
In the northeast USA, the ethics go something like this: if the first ascensionists put in bolts or pitons, it’s totally fine and they can even be replaced when they wear out (including the pitons!!!). If they didn’t, then you’re SOOL even if 2 nice anchor bolts would be way less impactful than the layers of tat on the dead or dying tree a 10 ft risky scramble away 🤷.
I've been behind on your videos. But this one really hits home. I'm a climbing instructor for the Boy Scouts and the three areas my team support are Tahquitz, Joshua Tree and Sawtooth Canyon all three that you just mentioned. We definitely explain the importance of not trusting any soft goods left there when it comes to supporting your life. I'd rather leave some gear up top if I know I get to go home.
Many years ago I cut away a rats nest of faded slings from a pair of rappel rings in Joshua tree. I threw the mess down to rest of our party who was waiting at the bottom of the climb, laced up the rings and rapped down. When I reached the bottom I was confronted by a very well known and quite angry climber who berated me for decreasing the safety of the route by removing the redundant slings. I was dumbfounded by the response I received for my action to increase safety and aesthetics.
So I hear the argument that bolts are a permanent change whereas slings around a tree are able to be removed, and yeah that sort of makes sense. But really, I have to wonder if the main reason we're still regularly putting slings on frequently used rappel stations is that it's just more convenient to carry a sling than a drill? Is this an effort thing, and what really needs to be done is someone just needs to put in the work?
That's probably a little location dependent. I have come across so many trees like this in Eldorado Canyon, CO, where there's a pretty strong no-bolt ethic (even though there are bolts all over the canyon by now), and the willpower to install them would absolutely be there. But because the history of the place was firmly "no bolts", there is resistance. Elsewhere, it's probably more because it requires work to put them in and people can't be bothered.
Thing is though, editing the rock with a hole or two seems like a smaller permanent change than the damage you do to the trees, especially considering the trees are alive (and, because it’s a fucking mountain, it’s not like trees have an easy life there anyway). And sure, one anchor sroundnthem once, that’s nit gonna harm the tree much, probably nit even rub away any bark. But a nest like those, staying in there for years, used regularly? That’s a different matter, potentially.
Keep up the great content and advocating for safer cliffs. I live in Australia and we have some great challenges with land managers and bolts. Some people get nostalgic about tat, but its ugly and dangerous. Some are getting replace by a big chain, which is better but 2 discreet bolts is still safer and more astetic.
Nearly did this once. Many decades ago. My mentor applied some audio physical association. So I never made a critical mistake. That's why you use some sacrificial new climbing tape ,that you take along for the purpose. Stay safe people. 💚 👍 👌
For tree work we use adjustable and retrievable cambium/friction savers. If you know you're going to repel of a tree, then why not use a cambium/friction saver and then retrieve it when you're done? You won't see tree workers leaving slings in tree's for the next guy. Retrievable tree anchors are cheap and lightweight. Why don't you just use these instead?
Have the same issues at Devil's lake here in WI. 90% you can walk off so you dont necessarily need a rap anchor but ik a few spots where there is decades old tat but everybody loses their goddamn mind when you mention that a 2 bolt anchor would save me from down soloing off the frigate past a wasp nest
Regarding impact at Devils Lake, the trees are really suffering - not from wear on the bark, but erosion and trampling of their roots. I just visited one crag where I last climbed 5 years ago - the erosion was startling. The cedar tree anchors will only bear a couple more years of increased traffic and abuse. A couple parties per year was maybe not too much stress, but multiple groups all week long from May through October is killing trees. Maybe it’s time for Wis DNR to consider a slight modification of the no-bolts Eric at DLSP - strategic anchor bolts to save trees.
In my local area, there are often tree anchors like discussed. Instead of rope or webbing, they have been replaced with metal wire strops around the tree (often in a plastic tube for abrasion??)
This guy makes a good point about bolts, in some cases, actually being less impactful to the environment than temporary solutions such as slings. It is also interesting how all of the bands did not break at the knot.
That anchor in the thumbnail is fine. I’ve rapped off some sketchy anchors. The one pictured is bomber. Already has webbing so I don’t need to leave any. 🤟🏼
As someone who did both climbing and working with trees, i can tell that if the tree roots are stable and the overall tree is stable, is better than a gear in a rock. If it's a dead tree... Well, it depends. I had no chance once to use it as a safing point and everything was good. Sometimes you just have to trust
Had a friend that would do a loose back up for all but the last person rappeling (looser than other tat). The idea being the test and inspection of the tat before 1 person uses and removes back up that didn't get weighted.
In lieu of stainless bolts, I think the climbing / canyoning community should adopt a "take one, leave one" approach. If you're doing a canyon or route which falls into the "not many people do this, and it's possibly dodgy" category, then you should carry some spare sling / rope. Whenever you come across an anchor, look at it and count the slings. If it only has one, then add another one and use both. If it has two, then remove the worse looking one, add your own, and use both. It's terrible for waste of plastics, and I feel bad about that, but it's a drop in the ocean compared to other plastic waste, and it could save a life. If you're a regular canyoner / climber, I highly recommend this practice. It could save a life.
Fortunately most popular climbing regions here in Europe have drilled in bolts, chains and rings on the top. I have never seen such UV degraded slings around blocks or trees here, however I have repelled with he rope directly around a tree and had no problem pulling off the rope later.
There are retrievable bark saver straps used by arborists for tree climbing in drt setup that can then be retrieved. You just have to remember well which of two ropes has to be pulled.
We pulled many old slings from Eldorado canyon and then abused the crap out of them, none of which broke in our torture tests under human body weight. Even a heavy climber weighs maybe 250lbs and repelling usually doesn't create much force. We finally had to use a truck to break the slings. These slings were sun faded to white from their original color and still impressively strong
I have some 7mm cord with a whole ecosystem growing out of it that I recently took down. It was anchored on some vegetation at the top of an ice climb, and it’s definitely been through some freeze thaw ice cycles inside of it as well for extra spice .
Something I was taught at a very young age, "The only rope and webbing that you can rely on, is one you purchased new and know the history of." Just as true today in 2024 as it was the first time rappelled down a face in 1981.
My rule on anchors is never rely on just one hard point, if it's trees, I prefer to have three anchors each to a separate tree and at the base or as close to the base as possible. 1" military grade webbing, 3 or more raps on each anchor, and tied off with a square knot and two hitches. But that's just me.
Lol, at the delaware water gap we call an anchor like that.... an ok anchor. Now it's when you get a tangle like that on a dead tree, and there's nothing else to rap off of.... that's when we start to sweat.
Would absolutely love to see this applied to the crags of North Carolina. Places like Ship Rock are bomber, well maintained, camo two bolt anchors. Other crags not so much. I would love to send you some old slings to test if possible. #makeanchorsgreatagain
That's why you just have to carry a knife and enough gear in case you have to replace some dodgy UV blasted gear. Maybe (and we've done plenty) to set bolts- yeah it might take an extra hour in crap weather etc but if set properly they won't fail. The crap slings i've seen people rap off canyoning where the wear and tear is ginormous due to abrasive particles in the streams, it's just crazy to scab on gear.
Bolts are fine, but I think it would be better to normalize removing bad gear. Leave the best looking piece and add a new one to back it up. Leave it better than you found it.
8 месяцев назад+1
I'm surprised noboty mentioned that if in doubt just put up a backup for the first person rappelling (let the backup a little loose) and see how the anchor works. If its fine the second person takes the backup off and rappels ...
I'm not sure what message you were planning to send by this video, but I think I have the opposite takeaway. Most of that tat broke at 8-12 kN. Remember 1 kN is 224 lbs. What kind of weight does a careful rappeler put on a rappel with good geometry? Answer? Less than body weight and sometimes as little as 30-50 lbs. How do I know? Because I also canyoneer and rappel off all kinds of anchors most climbers would turn their nose up at, like cairns, deadmen, sandtraps, and waterpockets. 8 kN is basically a ton. 2000 lbs. You've really got to have crappy rappelling technique (and 4 friends hanging from your harness) to get up to a ton of weight on the anchor. Remember that your typical 3 piece ERNEST anchor is not designed to rappel on, it's designed to hold a factor 2 leader fall. You don't need anywhere near that much strength for a rappelling anchor. So the bottom line is that it's just fine to rappel off the vast majority of the tat you find out there. That said, I still think it's best practice to cut the 8 old pieces of webbing away and replace it with a fresh new piece of black webbing when there is obvious visual degradation. No need to replace the hardware of course as demonstrated by the video. Thanks for doing the testing.
I’ve dabbled in climbing over the last 35 years, so I am by no stretch of the imagination an expert. Yet never once in that time would it have occurred to me as OK to use any left behind gear I saw on site. It is bewildering to me that anyone would even entertain the thought of doing that. Use your own, well maintained, well inspected gear, and understand that gear has a best before date.
Seems pretty consistent that sun-bleached webbing is unsafe but if it isnt bleached it is probably strong enough for rappelling? If i ever see white tat im definitely gonna back it up
Cool video ! Recently also rapped off old tat. I have done a lot of multipitch trad routes and you encounter these belays all the time. we usually always carry our own webbing and knife and we cut and clean 🧼 as we go, yet sometimes in certain scenarios you just end up having to decide , leave a lot more gear than you want OR rap on questionable tat. I use caution and even though I’m a pirate 🏴☠️ I’ll leave booty for someone else and keep me and my party safe .
IMHO community bolts/chains for popular stations seem like the way to go. Would be nice if more people cut and carried old slings from the stations at which they just placed new ones. Similar to packing out the mylar balloons that show up in the strangest places . Anyways, thanks for another great video to think about👍👍
south face of the tooth is also a climb of historical significance in the area so that's my understanding of why it hasn't gotten bolted anchors. also high traffic and lots of guiding means the cord tends to stay pretty fresh up there
IMO - If not sure on the age/history of the sling/cordage. Remove the old sling and replace with a brand new sling. Then take the old sling and dispose of it correctly instead of leaving them their. Adding more slings/cordage to the tree/rocks simply looks bad and telling everyone else is ok to leave old stuff behind. Replacing with new items and removing old items would greatly reduce accidents that could easily had been prevented.
In a sport that emphasizes safety to such a high degree I am genuinely surprised weatherproof labels on webbing indicating when it's manufactured are not always left in place.
Unless you have climbed on Taquitz; especially its north side; perhaps you should consider the risk of dozens of parties rappelling it; or setting up multiple pitch top ropes; with all the loose rock on it. A kid I had talked to a day before died when on a ledge you could camp on; and one most can get to without the need of a rope; had a rock come loose and off he went. With bolts at the top of every pitch; people could go out and rappel into the routes below; pretty sure some people would die. Pretty sure there would be some collosal tagging done.
UV damage and wet rot is always something to look at even your own gear. If it's a place that is used often and rock anchors are not able to be used. A 6 foot hand dug anchor rod and bust plate used in powerline construction put in properly will hold a vehicle if you wanna drop it off a canyon. Even put in with an auger I have pulled them with a boom winch to set them and it would stall the overloads on the hydraulics on a 15 ton boom. Just something to consider instead of using a tree.
So I've only now gotten into trad climbing in the UK, and I love it. Most of our climbing here is accessible from one or both ends, so stripping an abseil isn't that difficult. however, on sea stacks and more difficult climbs where access to the top isn't possible, I've learned that a LOT of tattered gear piles up over years of addition. as someone who also freedives and regularly cleans fishing gear from beaches, the trad ethos of not bolting the trop of a route, but instead ending up with a pile of harmful plastic tat makes no sense to me. you could argue that if you clean the route it has no visible impact, but at what point is a regularly used climb ever going to end up completely clear?
Seeing differently faded parts of the same sling fail is fascinating. I'm sure it wasn't a surprise to you? Does anybody sell a pure white sling? My DMM slings have only edges coloured... I'm reminded of how when learning to drive, I was taught that seatbelt's patterns change when "used". Feels like there's an opportunity for standardisation for manufacturers around colour and warnings... but not sure what?
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
Chelsea was one of my best friends. We went to college together and happened to both discover a love of climbing separately in the years after. She climbed so beautifully and effortlessly - I was always simultaneously jealous and in awe of her. I usually made her lead. In addition to being stronger and more graceful, she was braver. Too brave. She’d lost her mother to lung cancer the year before and climbing was how she dealt with the grief. She would have been 35 a few weeks ago. There were so many trips we wanted to take, Red Rocks, Smith Rock, Squamish... I’ll miss her always. Climb safe everyone.
Oh man I'm so sorry
I'm so sorry for the loss of your beautiful friend.
It is worth pointing out that cord is a lot less problematic than slings. Cord has the core protected by the sheath, therefore the core is not exposed to UV. Slings are thin, do not have a sheath and every strand is exposed, making them degrade a lot faster.
And when the core *is* exposed, through abrasion or sheath failure, it is visibly so.
@@thegoodtom1718No, they are not.
This is a good point.
Hugely significant point you made.
Yes, a bolt that lasts for years, is less impact than a ton of plastic slings.
It can also help to divert traffic away from trees that can be killed by soil compaction and erosion on popular routes.
Decades if done well.
That’s why I just don’t understand people who are against bolts for these specific reasons. How are a couple tiny bomber bolts that will last for years and years “more impactful” than rat nests of literal garbage that looks worse over time and degrades in the elements on top of being maintained by random people adding more material over time in a completely random and hard to keep track of way. How anyone can look at bolts and think “That’s unnatural and looks terrible!” and then look at big piles of degrading plastic tat and think “Ahhh much better” is beyond me.
Amen
@@moonti6820 Unpopular opinion from a clean ethics person. (Me) Decades, even if it's 50 years as a bomber anchor, doesn't take into account that in 300 years people will still be climbing. What are future generations going to say about our allowing people to "pave the vertical world"? It's a double edge sword because while yes, ima clip some bolts if they are there, but if they aren't then maybe I shouldn't be climbing the route if I don't have the skillset to protect myself properly or the huevos grandes to make it all happen. (Source: Climbed @ Whiteside Mtn NC for years)
The accident basically happened because they did not understand how climbing gear degrades. Teaching the limitations of gear is why I like this channel and would recommend to anyone starting out to do some kind of proper course rather than just learn from a friend who lacks knowledge or may do things wrong.
I don't understand how they didn't know if they were "experienced"... that was one of the first things I learned from this channel, and you'd think it would be common knowledge in the community even if they didn't watch this channel.
I think there's a lot to say about how soft gear is harder to visually inspect than hard gear. I was fully expecting that webbing to be white webbing, not green. And if I didn't see any fading or tears in "white" webbing, I would trust it.
@@StayCHilL24does any reputable manufacturer actually make white webbing for climbing use? I dont think ive ever seen it. Seems like that would be one of the reasons they wouldnt. If no one made white(ish) webbing, if you saw it, youd know its bad.
the thing is is that the sling when wet looked a lot more supple and strong too. that said i’m never rapping off one sling of dubious age and strength if i have one to leave.
@@StayCHilL24that’s what I’m saying. I would have thought that was a white sling, inspected it as such, and probably met the same fate. Whenever inspecting soft gear my first thought is “how fuckin old is this thing?”
Yes, RIP to those two climbers, who were young and had their whole lives ahead of them, but thank God that divine rock wasn't defaced with a 1/2" diameter steel bolt, making some crusty old f$%ks on Mountain Project upset because people can now safely repeat a heroic first ascent from (checks notes) 1936.
which was probably Piton aid
@@YetAnotherAaron I looked it up - a 4-pitch 5.4, so they probably just ran it out. MP suggests there's controversy on whether to descend or rap. IMO it's these beginner routes that need proper anchors - tons of traffic, people not ready for every situation, easy to get over-confident.
@@IronJohn755 Absolutely.
@@IronJohn755
They were on a 5.8-5.9, not the trough. The issue is it's not a rappel station, it's a place to bail from (just as if you had to leave some nuts to bail mid pitch). And you don't even belay from that tree on the way up, you belay about 10-15 feet left. I totally agree that if it's a rap station, it's probably better to put two bolts in. But I can't advocate for putting bolts in everywhere you could possibly belay/rap.
The tat should've been removed long before they got there
@@shawnrezendes1165 Thanks for the clarification.
In Tree climbing, we use retrievable ring on ring friction savers that would be basically the same as what you are using for slings. Consists of a large anchor ring on one end and a small anchor ring on the other. Put the rings together then put your rope through. You can either lower yourself using moving rope system / doubled rope technique, or you can put an alpine butterfly to stop against the small ring, put a carabiner in the loop so it doesn't close, then repel on single rope technique / stationary system. Have to make sure you have enough rope on the butterfly end to touch the spot you are repelling to in order to retrieve. To retrieve the friction saver, either put a stopper knot or a retrieval ball on one end of the rope and pull the rope down. The knot or retrieval ball goes through the big ring but catches the small ring and it pulls the friction saver out. For controlled retrieval, we use throw line by tieing it to the stopper knot / retrieval ball end. The throwline follows the path of the large ring, which is pulled around the backside of the trunk / limb. Have to pay attention to whether or not the big ring fits through the union on the tree you are using so it doesn't get stuck. For Stationary rope there is a variety of different ways to do a choker around the tree with your climbing line that are retrievable, as simple as a butterfly fly knot by it self, or a bit more complex as a floating ring with a midline stopper knot. Probably too much friction for anchoring to a boulder, but might be useful for anchoring to trees, depending on how far you are repelling / lowering yourself.
I am a tree climber, rock climber, and SAR tech. I built my own cambium saver out of two differently sized forged aluminum rings, some 1" tubular webbing, and a champagne cork w/ a bit of cord for the retrieval ball. It works great, cost nearly nothing, and can be made to whatever length you need it. Now I can rappel down on DdRT and retrieve the anchor with the cork if I have enough rope, or rappel down on a blocked SRT and retrieve the anchor with my throw line.
TLDR: buy or make an arborist cambium saver, and carry that along with some throw line in a chalk bag.
I am old and I no longer climb but my younger family members do. They are all super environmentalist and when I tell them that back in the day bolting a route was considered pretty criminal they just don’t get it. They ask me how did you climb long run outs. Well those routes were reserved for people who climbed at a completely different level. The words “ sport climbing” were never used. You either top roped or you led the climb. We never left all kinds of crap around a tree and I would have never clipped into anyway. It’s common knowledge how the sun damages synthetic fibers and any fibers for that matter. It’s the same reason you avoid setting your tent up in the direct sunlight. I wish I still was young and climbing. I think I would really enjoy just clipping in and using all the new gear. It looks great. Safety is always priority number one or it is for me. It really good that there are channels like this that can spread the knowledge. You actually may have saved a few lives. Take care
well 61 here and I'd say i haven't stopped climbing yet but also totally agree with what you said about "either top roped or led" I have seen so many people try climbing on the rock like they climb in the gym LOL, usually with some consequences of falling all over the place.
At Seneca Rocks in West Virginia where I learned to climb the guides would maintain the rap stations with trees and would use 11m static rope run through black tubular webbing with two rap rings. When the black webbing lost its color it was time to replace the anchor. I wonder how strong the rope under the webbing would be? The idea being the webbing would take the UV damage and protect the rope.
Like this
That's an excellent alternative. Plus you get extra abrasion resistance.
Man if only there was a more permanent solution that required less maintenance, was more safe, allowed better rappels and abused trees less 🤔
Very sensible solution, to only upgrade to that system I would recommend is including a date tag possibly inside or just attached to the webbing.
That way anyone could inspect it and replace at set intervals of Xyears rather than relying on visual inspection.
Is the entire rope encased in the webbing and then tied off, webbing and rope together? Or does the webbing protect most of the rope but the knot is exposed?
It's mind blowing how crazy the impact of extended UV exposure on the same piece of gear is in those examples!
Former SAR high angle guy here…good video. Also good to hear that people are starting to pay attention to this, the fact it’s trash in the environment. It’s easy to confuse left gear with trash.
I lost my best friend to this in the Alps. He was a phenomenal climber, well known and very experienced, but three old sun baked pieces of tat failed and he fell several hundred meters. In the alps and in the US Ive often come across thick wedges with multiple sun baked slings - I normally cut away the oldest and replace with new. As an amusing aside, about 12 years ago I removed a shoelace and titanium rap ring that was on a shrub from from Officers Gulch (near fresco), I was bimbling about on the ice during a drive home and it melted my brain in so many ways… a shoelace. Well it makes me laugh
I want a shoelace break tested stat, lol.
Same here. If it's bad enough to add a backup then cut away the rubbish
Must have been an Alaskan. They get their thrills rapping off thumb size alders.
@@NotTheRealRustyShackleford that’s a good idea
@@NotTheRealRustyShackleford @hownot2
Don’t add. Replace
A critical bit of info about both of those accidents is that they both happened when the slings were wet. This probably didn’t decrease their strength but it DEFINITELY made the slings look newer. Read the American Alpine Club summary of the JTree accident
5:37 Thanks for giving that material one last ride! 😆😁
5 days old comment on a video posted 30 minutes ago
wat
@@bobrobe7121 It was probably uploaded and set to only be viewed with the proper link and not set to public for a week
YOU'RE AWESOME CHAD! LOVE YOU
Thank you Chad, for consistently improving rap stations around The Gunks!
Thank you Chad for what you’re doing at the Gunks
I know nothing about climbing, caving, or canyoning. As someone who enjoys watching content related to these things, this has opened my eyes much more to the ideas of safety, redundancy, and environmental impact of many people tying off to the same points for their journeys through nature. Thank you!
Frankenjura: cutting slings if they look too bad. Take the shit you don't trust with you and leave good stuff or rappel with nothing left behind.
I hate leaving stuff behind. As i don't trust other peoples slings and so i don't want anybody to trust mine.
Agreed. In Norway, where I climb, we are taught to cut slings and ropes that are left behind (and throw it in the trash) as we do not know how bad they are. Only steel anchors (not your own) are used for the rappels. If you have tobail and rappel on ropes or slings then you sacrifice your own gear that you know the history of. No way I will trust my own life to some random sling when 5$ worth of gear can be sacrificed.
@@vegardjotenandersen90 New to the sport. I would have though this is standard operations for all climbers. Its wild what people will hang off of.
It really depends on your style of climbing. Here in the Alps, there are plenty of bolted climbs and rappel routes. However, when mountaineering and alpine climbing, these rat nests of a bunch of old slings and cords are pretty standard, even on most popular 4000ers. Leaving behind one of your own slings/cords on every rappel is not really feasible when rappelling 10 times in a row. Also consider the amount of trash created when everybody cuts the sling of the previous parties.
However, that does not mean that I would just rappel off any sling I find in the mountains. If there are many pieces, they will hold. After all, 5 slings with 3kN is still more than enough for rappelling. Also, cord will be a lot safer than slings as the core is protected.
If there is only a single piece, it should be backed up by your own gear. And even if you do not want to leave anything behind, create a cold (non-weighted) backup and have the heaviest guy in the party go first and thoroughly bounce test it. If there is any doubt left, leave your backup piece as well.
@@foobar9220 5 slings @ 3kN each is hilarious to me hahaha, sorry. I am a caver in the USA, and it is very rare that we find old nylon anchors underground, but not uncommon that we find permanently rigged ropes attached to (hopefully) all stainless steel hardware. Since there is no UV underground, some of these ropes are decades old and still pull test to 50% MBS (50% of 30-40kN is amazing for our forces). But what happens in our community is that permanently bolted anchors can be really bad- galvanic corrosion is incredibly fast underground, and sometimes you find really shitty bolted routes. Like you should never rappel/climb on a single bolt, and some people don't understand how to bolt in caves because we use static ropes, meaning you can shock load the entire system if a bolt blows out. So even with bolts, I've learned to be very skeptical- but it seems its not exactly the case in mountaineering/rock climbing?
And the biggest issue with this is that nobody truly knows what tat is trustworthy so people sometimes remove perfectly safe gear. A few years ago I built a bomber rappel station on a popular alpine route with a cordalette and 2 rappel rings, came back a week later and it was gone so either somebody took it for themselves or thought it was old and threw it away. Wasteful either way. That route fortunately now has some bolted rap stations.
Hey Ryan great video.
My takeaways when making judgement calls when rappelling off of tat:
1. Check for discoloration of the webbing. If it’s cord, look for desheating and softness to indicate if the cord is coreshot.
2. If it’s webbing, check for crustyness/stiffness in the material.
3. Generally metal is okay. But look for obvious signs of distress and if there is a massive groove.
Is there anything else I missed?
4 look for fluffyness on the tat, as that's another good indicator of wear
I love the emphasis on how we're semantically defining "impacting the environment," in terms of whether it's e.g. 2 secure bolts into a rock, or e.g. loads of old plastic (nylon etc.) cordage being left to dissolve into microplastics into the waterways and atmosphere.
Great points.
So I come from a technical rescue background, I understand that the safety factors we use are way way above what sport climbers use. That being said, I look at it as if the protection should be replaced with new webbing, rope, whatever, every time. Your life is worth far more than it cost to replace sketchy gear. I can buy 100’ of tubular webbing for $40. If it were me, I’d cut the old stuff out and place new every single time if it was not literally witnessed being places. The other thought would be to sharpie a date on it. But again how long is too long? I don’t have the answers but it would give some idea.
Sharpie ink isn't great for webbing
Neither is UV. But I am fairly certain that the sharpie thing has been debunked.
In my brief expert google search the sharpie thing hasn't been debunked.. In 2002 Tests by UIAA was confirmed. UV is bad but unavoidable. @@Rancourt762
I've done some commercial rope access work too, and in every course they tell you not to use any marker pens on your gear or it won't be passed in the obligatory recurring safety checks, but of course you knew that right?@@Rancourt762
it hasn't@@Rancourt762
6:25 There's a strong chance that black cord from the Gunks was put there by me! Obviously I don't have the monopoly on black technora cord, but that was my leaver cord for a few years, a few years back.
One of my dear friends Bryson Allen was killed during a rappel anchor failure on thw mendenhall towers. I really appreciate you helping keep climbers a little safer during equipment critical moments. Bryson was 23, he was an incredible person and a joy to climb with. I hope all of you climb for many more years. ❤️
Years ago I found an old sling in a canyon in northern Spain. It looked OK except it was a little faded and the stitch block had been wrapped and covered with duct tape. I used to take it to classes, I was training vertical adventure guides, and would randomly throw it on the table along with a selection of various slings, some proprietary, some knotted, then ask people on the course to sort out what they would or would not use. Most people rejected a couple of knotted slings, tape with a tape knot and cord with a double fisherman's knot only on the basis they were knotted and were quite happy to include the old Spanish sling, even though it was faded and the duct tape made it impossible to check the stitch block, or even if there was a stitch block!
When they asked me what I'd choose I would reply, if I didn't know their age and history, none of them!
I can’t believe the gear from the gunks was still strong because it looked so old. I’m new to trad climbing and seeing those slings always makes me nervous so I opt for bolted rappels but I’m glad to hear there are people trying to keep it safe.
I was pleasantly surprised as well!
I moved to the West Coadt just as the Gunks were starting to add rappel stations. The amount of tat that uses to be everywhere, rapped around trees, was truly frightening.
Some credit may be due to the orientation of the cliffs. The south-easterly aspect means that the sun isn't beating on things all day long.
East facing cliffs maybe limited sun expo?
Sling from tape is the worst material to use, the way it weaves there is no part protected from the sun. Rope sling is far better as the core *should* never be in daylight, and if it is visible you can see there's a problem
I installed a "sling" on a tree for others, I used heavy stainless steel cable and 2 stainless steel mooring rings on the cable so people can retrieve their rope (cable passed through some old hose pipe where it contacted the tree), I don't have to worry that someone will die because of an old sling I left, but it's expensive and a hassle to go and put it there.
Thank you for sharing as always!
I’m part of a rebolting team in Belgium. We always keep safety aspects in mind when maintaining an area or when we’re developing a new one. Two small fixed anchors definitely do not stand out and are highly recommended
This is very common in the U.K. where bolt anchors on trad climbs are exceedingly rare. The BMC (British Mountaineering Council) volunteers do a great job of installing and replacing static rope anchors (around tree trunks) and have installed steel cable anchors at some popular crags. Nevertheless there are still lots of tat nests at the top of some climbs (e.g. on sea stacks).
Yeah I imagine I have rappeled off of some of those slings you were showing from the gunks. We are taught to check the quality of the webbing, mainly on crustiness/stiffness. Aside from the increased plastic, you can also see the wear and tear on the trees. Some routes have been replaced with bolt anchors, but it's a work in progress. I for sure prefer bolts and chains when possible.
I once noticed a frayed leg strap on a parachute that another jumper was putting on. After I commented how it didn't look good, he reached down and tore it in two with his fingers. Don't underestimate how material can weaken over time.
I was hoping you would test 2 or more pieces of tat together. Agree with the advantages of a well placed bolted anchor.
I would bet in the real world you're only really loading up 1 piece at a time because nobody is getting them all of equal length. So 1 breaks, you're on the next longest, it holds until it fails, and you're now on the 3rd longest etc
Yes, I’d like to see 3, or 4, or 5 tat pieces EQUALIZED for a test; call this the “best possible” (but unlikely ) situation. Then do another test of 3, or 4 or 5 pieces not equalized (typical) in which 1 at a time would get loaded and fail and load the next longer sling, etc (as detailed by @evangatehouse).
I've had to set up an emergency rappel one day, to get down the mountain before a thunderstorm would catch us out in the open.
I'm sorry to have to admit that I did leave some rope and one carabiner out there.
They were definitely not my newest and bestest. I can imagine leaving crap that's already old exposed to the elements and the UV rays at 3000 metres is indeed quite dangerous. I do hope the cabin keeper found someone to clean up my stuff, after I explained to them where I had left it.
Leaving stuff when in need isn't the issue. The issue is that these stations are expected and normal, but not always treated with the suspicion and care that they deserve.
I have a collection of shit gear that I've pulled off canyons and climbs. The shit gear isn't really the problem. The problem is that many climbers and canyoners aren't factoring in carrying replacement gear / sacrificial gear. A length of 6mm power-cord that could be used for 3 or 4 anchors is negligible in terms of weight, but most people don't have the experience to know they should be carrying it.
We need to normalise the attitude of carrying spare, lightweight anchor material to replace or enhance the anchors used by the community. It may cost you $20 to replace the anchors on a multi-pitch climb, or a multi-abseil canyon, but it may save someone's life.
@Intermernet
I agree. I never leave the ground without the means to get back down safely.
Chad is a fitting name consideing the work he is putting in cleaning up anchors, and putting in new ones!
My rules of thumb:
If I add a piece of tat, I cut out the oldest pieces of tat until there's only 3-4 pieces total
If there's only one or two pieces, always add a fresh piece
Hey Ryan. Thanks for providing amazing content. Nerding out on this topic and virtually everything you’re up to is high quality information. Keep it up.
Chad is one my favorite people and it's so fucking cool to see him on this channel. 🎉❤
Duude that framing with the mountain at the start. Gold. I love WA.
In the northeast USA, the ethics go something like this: if the first ascensionists put in bolts or pitons, it’s totally fine and they can even be replaced when they wear out (including the pitons!!!). If they didn’t, then you’re SOOL even if 2 nice anchor bolts would be way less impactful than the layers of tat on the dead or dying tree a 10 ft risky scramble away 🤷.
I've been behind on your videos. But this one really hits home. I'm a climbing instructor for the Boy Scouts and the three areas my team support are Tahquitz, Joshua Tree and Sawtooth Canyon all three that you just mentioned. We definitely explain the importance of not trusting any soft goods left there when it comes to supporting your life. I'd rather leave some gear up top if I know I get to go home.
Many years ago I cut away a rats nest of faded slings from a pair of rappel rings in Joshua tree. I threw the mess down to rest of our party who was waiting at the bottom of the climb, laced up the rings and rapped down. When I reached the bottom I was confronted by a very well known and quite angry climber who berated me for decreasing the safety of the route by removing the redundant slings. I was dumbfounded by the response I received for my action to increase safety and aesthetics.
As soon as I saw the thumbnail I thought "oh yeah, anchors at the Gunks all look like that." Cool to see you test some!!
The crackling sound of old webing breaking!
thank you for making these videos. you literally save lives by education
Always bring some webbing and a quicklink at least! Half a pound in weight go be the difference between a smooth operator or a sketchy/deadly rap
So I hear the argument that bolts are a permanent change whereas slings around a tree are able to be removed, and yeah that sort of makes sense. But really, I have to wonder if the main reason we're still regularly putting slings on frequently used rappel stations is that it's just more convenient to carry a sling than a drill? Is this an effort thing, and what really needs to be done is someone just needs to put in the work?
That's probably a little location dependent. I have come across so many trees like this in Eldorado Canyon, CO, where there's a pretty strong no-bolt ethic (even though there are bolts all over the canyon by now), and the willpower to install them would absolutely be there. But because the history of the place was firmly "no bolts", there is resistance. Elsewhere, it's probably more because it requires work to put them in and people can't be bothered.
Thing is though, editing the rock with a hole or two seems like a smaller permanent change than the damage you do to the trees, especially considering the trees are alive (and, because it’s a fucking mountain, it’s not like trees have an easy life there anyway). And sure, one anchor sroundnthem once, that’s nit gonna harm the tree much, probably nit even rub away any bark. But a nest like those, staying in there for years, used regularly? That’s a different matter, potentially.
The piranha is a tiny but great climbing knife for clearing tat.
Same thing happened in Mexico a few days ago, a touring company was doing a canyon in they anchor to a tree just one webbing one loop and it broke :(
If we don’t want folks to link unlinked anchor bolts (3:30) we shouldn’t leave single links oriented to ensure rope twisting on the pull.
Keep up the great content and advocating for safer cliffs. I live in Australia and we have some great challenges with land managers and bolts. Some people get nostalgic about tat, but its ugly and dangerous. Some are getting replace by a big chain, which is better but 2 discreet bolts is still safer and more astetic.
Nearly did this once. Many decades ago. My mentor applied some audio physical association. So I never made a critical mistake. That's why you use some sacrificial new climbing tape ,that you take along for the purpose. Stay safe people. 💚 👍 👌
For tree work we use adjustable and retrievable cambium/friction savers. If you know you're going to repel of a tree, then why not use a cambium/friction saver and then retrieve it when you're done? You won't see tree workers leaving slings in tree's for the next guy. Retrievable tree anchors are cheap and lightweight. Why don't you just use these instead?
I'll be replacing the tat at the top of the 2nd pitch of Wasp (Gunks) this spring, if someone else does not get to it first.
I had my first anchor failure after 27 years and was lucky enough to walk away with no injuries. Be safe out there.
What was the context, was it slings, uv damage etc?
Have the same issues at Devil's lake here in WI. 90% you can walk off so you dont necessarily need a rap anchor but ik a few spots where there is decades old tat but everybody loses their goddamn mind when you mention that a 2 bolt anchor would save me from down soloing off the frigate past a wasp nest
Regarding impact at Devils Lake, the trees are really suffering - not from wear on the bark, but erosion and trampling of their roots. I just visited one crag where I last climbed 5 years ago - the erosion was startling. The cedar tree anchors will only bear a couple more years of increased traffic and abuse. A couple parties per year was maybe not too much stress, but multiple groups all week long from May through October is killing trees. Maybe it’s time for Wis DNR to consider a slight modification of the no-bolts Eric at DLSP - strategic anchor bolts to save trees.
In my local area, there are often tree anchors like discussed. Instead of rope or webbing, they have been replaced with metal wire strops around the tree (often in a plastic tube for abrasion??)
Dogtags with the month and year of installation might be a good idear.
I like this idea.
This guy makes a good point about bolts, in some cases, actually being less impactful to the environment than temporary solutions such as slings.
It is also interesting how all of the bands did not break at the knot.
I’ve never climbed anything that didn’t have an improved trail, however, I love these climbing videos.
That anchor in the thumbnail is fine. I’ve rapped off some sketchy anchors. The one pictured is bomber. Already has webbing so I don’t need to leave any. 🤟🏼
As someone who did both climbing and working with trees, i can tell that if the tree roots are stable and the overall tree is stable, is better than a gear in a rock.
If it's a dead tree... Well, it depends.
I had no chance once to use it as a safing point and everything was good.
Sometimes you just have to trust
Had a friend that would do a loose back up for all but the last person rappeling (looser than other tat). The idea being the test and inspection of the tat before 1 person uses and removes back up that didn't get weighted.
In lieu of stainless bolts, I think the climbing / canyoning community should adopt a "take one, leave one" approach. If you're doing a canyon or route which falls into the "not many people do this, and it's possibly dodgy" category, then you should carry some spare sling / rope. Whenever you come across an anchor, look at it and count the slings. If it only has one, then add another one and use both. If it has two, then remove the worse looking one, add your own, and use both.
It's terrible for waste of plastics, and I feel bad about that, but it's a drop in the ocean compared to other plastic waste, and it could save a life.
If you're a regular canyoner / climber, I highly recommend this practice. It could save a life.
As a canoyneer I have a good sense of what is good or bad.
But my friends did die from bad stuff....
Very sorry to hear that
I'm not climber, but for god sake, thank you for that video!
Fortunately most popular climbing regions here in Europe have drilled in bolts, chains and rings on the top. I have never seen such UV degraded slings around blocks or trees here, however I have repelled with he rope directly around a tree and had no problem pulling off the rope later.
There are retrievable bark saver straps used by arborists for tree climbing in drt setup that can then be retrieved. You just have to remember well which of two ropes has to be pulled.
Great episode. Super important topic. Well demonstrated.
NOT a climber but vid caught my eye - Blimey this is eye-opening and scary. I have wondered about how secure the bolts/tethers are when rappelling...
We pulled many old slings from Eldorado canyon and then abused the crap out of them, none of which broke in our torture tests under human body weight. Even a heavy climber weighs maybe 250lbs and repelling usually doesn't create much force. We finally had to use a truck to break the slings. These slings were sun faded to white from their original color and still impressively strong
Ah, the infamous ``wrap 3, pull to your death`` on sun bleached webbing.
Wrap many pull few
On the weight load rating tag, maybe add a date to it if you can
That's what we do in commercial rigging. I was just going through some cables and slings today checking tags for dates.
Most of these are just tubular webbing by the foot and don't have a rating tag, if they even have a rating at all.
@@williambrennan7794 thats how i kn0w. im an ironworker/cell tower guy
I've rapped off the tree at the top is Captain Hook (Suicide Rocks) many times. Gotta use good judgement, nylon webbing weathers fast in full sun.
I have some 7mm cord with a whole ecosystem growing out of it that I recently took down.
It was anchored on some vegetation at the top of an ice climb, and it’s definitely been through some freeze thaw ice cycles inside of it as well for extra spice .
Something I was taught at a very young age, "The only rope and webbing that you can rely on, is one you purchased new and know the history of." Just as true today in 2024 as it was the first time rappelled down a face in 1981.
My rule on anchors is never rely on just one hard point, if it's trees, I prefer to have three anchors each to a separate tree and at the base or as close to the base as possible. 1" military grade webbing, 3 or more raps on each anchor, and tied off with a square knot and two hitches. But that's just me.
Lol, at the delaware water gap we call an anchor like that.... an ok anchor. Now it's when you get a tangle like that on a dead tree, and there's nothing else to rap off of.... that's when we start to sweat.
Would have loved to see the 3 worst one pulled at same time
Would absolutely love to see this applied to the crags of North Carolina. Places like Ship Rock are bomber, well maintained, camo two bolt anchors. Other crags not so much. I would love to send you some old slings to test if possible.
#makeanchorsgreatagain
That's why you just have to carry a knife and enough gear in case you have to replace some dodgy UV blasted gear. Maybe (and we've done plenty) to set bolts- yeah it might take an extra hour in crap weather etc but if set properly they won't fail. The crap slings i've seen people rap off canyoning where the wear and tear is ginormous due to abrasive particles in the streams, it's just crazy to scab on gear.
Bolts are fine, but I think it would be better to normalize removing bad gear. Leave the best looking piece and add a new one to back it up. Leave it better than you found it.
I'm surprised noboty mentioned that if in doubt just put up a backup for the first person rappelling (let the backup a little loose) and see how the anchor works. If its fine the second person takes the backup off and rappels ...
I'm not sure what message you were planning to send by this video, but I think I have the opposite takeaway. Most of that tat broke at 8-12 kN. Remember 1 kN is 224 lbs. What kind of weight does a careful rappeler put on a rappel with good geometry? Answer? Less than body weight and sometimes as little as 30-50 lbs. How do I know? Because I also canyoneer and rappel off all kinds of anchors most climbers would turn their nose up at, like cairns, deadmen, sandtraps, and waterpockets. 8 kN is basically a ton. 2000 lbs. You've really got to have crappy rappelling technique (and 4 friends hanging from your harness) to get up to a ton of weight on the anchor. Remember that your typical 3 piece ERNEST anchor is not designed to rappel on, it's designed to hold a factor 2 leader fall. You don't need anywhere near that much strength for a rappelling anchor. So the bottom line is that it's just fine to rappel off the vast majority of the tat you find out there. That said, I still think it's best practice to cut the 8 old pieces of webbing away and replace it with a fresh new piece of black webbing when there is obvious visual degradation. No need to replace the hardware of course as demonstrated by the video. Thanks for doing the testing.
I’ve dabbled in climbing over the last 35 years, so I am by no stretch of the imagination an expert. Yet never once in that time would it have occurred to me as OK to use any left behind gear I saw on site. It is bewildering to me that anyone would even entertain the thought of doing that. Use your own, well maintained, well inspected gear, and understand that gear has a best before date.
Seems pretty consistent that sun-bleached webbing is unsafe but if it isnt bleached it is probably strong enough for rappelling? If i ever see white tat im definitely gonna back it up
This same thing happened in 2008 in the Red River Gorge. Ben and Laura were simultaneously rapping when the tat broke.
They both died.
Lovely video!! 😍 Thank you sir!
Cool video ! Recently also rapped off old tat. I have done a lot of multipitch trad routes and you encounter these belays all the time. we usually always carry our own webbing and knife and we cut and clean 🧼 as we go, yet sometimes in certain scenarios you just end up having to decide , leave a lot more gear than you want OR rap on questionable tat. I use caution and even though I’m a pirate 🏴☠️ I’ll leave booty for someone else and keep me and my party safe .
Who would win:
•A sling
•Years of UV exposure, temperature swings, moisture, freeze/thaw cycles, debris, and hard falls
IMHO community bolts/chains for popular stations seem like the way to go. Would be nice if more people cut and carried old slings from the stations at which they just placed new ones. Similar to packing out the mylar balloons that show up in the strangest places . Anyways, thanks for another great video to think about👍👍
south face of the tooth is also a climb of historical significance in the area so that's my understanding of why it hasn't gotten bolted anchors. also high traffic and lots of guiding means the cord tends to stay pretty fresh up there
IMO - If not sure on the age/history of the sling/cordage. Remove the old sling and replace with a brand new sling. Then take the old sling and dispose of it correctly instead of leaving them their. Adding more slings/cordage to the tree/rocks simply looks bad and telling everyone else is ok to leave old stuff behind. Replacing with new items and removing old items would greatly reduce accidents that could easily had been prevented.
"These things will never break down in a landfill!"
-Breaks down on a rock instead...
In a sport that emphasizes safety to such a high degree I am genuinely surprised weatherproof labels on webbing indicating when it's manufactured are not always left in place.
Unless you have climbed on Taquitz; especially its north side; perhaps you should consider the risk of dozens of parties rappelling it; or setting up multiple pitch top ropes; with all the loose rock on it.
A kid I had talked to a day before died when on a ledge you could camp on; and one most can get to without the need of a rope; had a rock come loose and off he went. With bolts at the top of every pitch; people could go out and rappel into the routes below; pretty sure some people would die.
Pretty sure there would be some collosal tagging done.
I, and many others I know, usually cut away old rappel slings when coming over them, before leaving a fresh one on our own rappel.
All the money for the gunks goes straight to buying alcohol
Trusting a single sling is hardcore even if they’re brand new
yeah it doesn't take much to at least double it, not even dirtbag climbers should be THAT cheapskate
UV damage and wet rot is always something to look at even your own gear. If it's a place that is used often and rock anchors are not able to be used. A 6 foot hand dug anchor rod and bust plate used in powerline construction put in properly will hold a vehicle if you wanna drop it off a canyon. Even put in with an auger I have pulled them with a boom winch to set them and it would stall the overloads on the hydraulics on a 15 ton boom. Just something to consider instead of using a tree.
So I've only now gotten into trad climbing in the UK, and I love it.
Most of our climbing here is accessible from one or both ends, so stripping an abseil isn't that difficult.
however, on sea stacks and more difficult climbs where access to the top isn't possible, I've learned that a LOT of tattered gear piles up over years of addition.
as someone who also freedives and regularly cleans fishing gear from beaches, the trad ethos of not bolting the trop of a route, but instead ending up with a pile of harmful plastic tat makes no sense to me.
you could argue that if you clean the route it has no visible impact, but at what point is a regularly used climb ever going to end up completely clear?
Seeing differently faded parts of the same sling fail is fascinating. I'm sure it wasn't a surprise to you?
Does anybody sell a pure white sling? My DMM slings have only edges coloured...
I'm reminded of how when learning to drive, I was taught that seatbelt's patterns change when "used". Feels like there's an opportunity for standardisation for manufacturers around colour and warnings... but not sure what?
i'm not even actually there and my heart rate spikes watching this
that hill you are on is higher than anything within 1000km of me 😄 and then there is an even bigger volcano in the background😨 what a place to live !
I always bring extra new sling, clean it and make it better! Only if u know what your doing ofcourse.