I don't prefer one hitch over another as a rule. I find which hitch works best for the application, hitch cord, and line I'm going with. I like your videos... well done. Thank you for making and sharing them.
Sometimes it's a combination of the climbing rope and the prusik cord used that makes one friction hitch grab better then the other. The Prusik is easy to tie although it's sometimes a bit tricky to get the ends aligned when using an eye to eye prusik cord. In my experience the prusik can also be a bit difficult to advance after it has been loaded.
Same goes for me when it comes to the Distel Hitch (not in this video). I use that one a lot because I personally find it a very easy to tie hitch and it is pretty fool proof. The Prusik can be a bit difficult to advance after it has been load heavily.
Yes sometimes it bites. It gives a bit more grip on the rope which makes it easier to tie the knots. Also it's a bit clearer to see and easier to edit.
I've never heard of this. I can't give you any useful advice as I personally never tried that. Hope it's not for climbing because I doubt it will work reliably due to chain being slippery and not compressable. You probably will get hung up on each link as well.
Maybe with the normal prusik hitch (ruclips.net/video/WC9IBgA-iMw/видео.html), that's a symmetrical friction hitch ideal when loading can occur from both directions. You can add or remove wraps when needed. In my sailing days I never attached the anchor with a chain but I used a rope and an anchor hitch. That's the advantage of having no rocks on the bottom of a lake. An issue with knots and hitches is that they often start to react differently when tied in wet rope.
I usually use an 8mm prusik cord on an 11mm climbing line. But the Schwabisch, klemheist and also the Blake's hitch work in general well if you use the same diameter prusik cord as the climbing line. It also depends on the material of the climbing line.
@@WoodenShoesHomestead I'm not using this knot for climbing .I'm using it on paracord cause the smaller cord is a pain to deal with on the prusik knot.
Oh, like that. Paracord is indeed a bit different. I also use the Blake's hitch with paracord, for example to tighten the lines on a tarp. The advantage with the Blake's hitch (ruclips.net/video/Md0xh7SXbU0/видео.html) is that you can tie it in the tail end of the rope, creating an adjustable loop.
Nice clear demonstration. Do both working ends have to be loaded? Equally? How is that accomplished? What problems are solved by moving to each hitch? What limitations of each? What diameter lines are compatible?
Thank you, glad you liked it! You can attach a carabiner through the spliced eyes to generated a balanced load on both strands and that will also prevent the hitch from becoming undone. If you want a hitch that works well with one strand you should look into the Blakes hitch: ruclips.net/video/Md0xh7SXbU0/видео.html The Klemheist works very well with the secured foot lock technique when climbing. Prusik cord diameter depends on the material of the Prusik cord being used. Some are more flexible then others. This can easily be tested by folding the cord and checking the loop that forms when doing so. The smaller the loop the more flexible the cord, the bigger the loop the stiffer the cord. Flexible Prusik cord grabs easier and can therefore be thicker compared to less flexible cord. In the video I use 8mm Prusik cord with an 11mm climbing line. For me that works very well. When secured foot locking on a double rope I use 11mm Prusik cord.
The prusik is a very reliable friction hitch for this. It is very easy to tie as well. The backup knot should be tied below your rappel device. For easy access, nothing is more frustrating than the friction hitch being just out of reach. (Been there) And for load sharing with the rappel device.
That is not necessary, but a more advanced setup will make life easier. Body thrusting up a tree with only a prusik is doable but very hard on the body. Climbing aids like a rope wrench and a foot ascender will make climbing much easier.
That is also an option. I use them mostly for climbing but of course they are not limited to that. The Prusik for example can also be used when hanging a tarp and you want to rig it tight.
Schwäbisch is the adjective for describing things from Schwabia, a region in Southern Germany. I suppose that knot came from that region. Prusik is from Austria, not far away. Klemheist sounds pretty Germanic too.
Yes I have the same experience with the Prusik it can be very hard to break especially when wet. The Machard is indeed easier to advance, I also use the Distel hitch often. That one is a bit more advanced then those three easy friction hitches but it has an easier release.
The standard prusik is indeed very safe and easy to tie. The disadvantage is that the prusik hitch can be difficult to advance and it sometimes doesn't release very well.
In my opinion the Klemheist is the best friction hitch in this TOP 3, Do you agree?
I don't prefer one hitch over another as a rule. I find which hitch works best for the application, hitch cord, and line I'm going with. I like your videos... well done. Thank you for making and sharing them.
Just wondering why one is any better than the others?
Of course you can’t tie the middle one with a loop / bight in the cord.
Sometimes it's a combination of the climbing rope and the prusik cord used that makes one friction hitch grab better then the other. The Prusik is easy to tie although it's sometimes a bit tricky to get the ends aligned when using an eye to eye prusik cord. In my experience the prusik can also be a bit difficult to advance after it has been loaded.
I like the prusik only because I'm so used to it! Until I practice the other 2. I like the michocaan!
Same goes for me when it comes to the Distel Hitch (not in this video). I use that one a lot because I personally find it a very easy to tie hitch and it is pretty fool proof.
The Prusik can be a bit difficult to advance after it has been load heavily.
Great video thanks for the explanations and demos !
Thank you! Good to hear that you found it useful.
Thank you, this is very interesting. I'm familiar with the prussik but I must try the other two
Thank you! Another favourite of mine is the distel hitch. ruclips.net/video/ZIlMc6492JA/видео.html
I prefer the midshipman's hitch, perhaps with additional wraps. It provides much more friction and is still easily adjusted.
For climbing? Think it's related to the Blake's hitch. But that's out of the scope of this video. Those are closely related simple friction hitches.
Nice but why you waring gloves ,are you affraid of the rope.😄
Yes sometimes it bites. It gives a bit more grip on the rope which makes it easier to tie the knots. Also it's a bit clearer to see and easier to edit.
Borrowed rope had to return in like new condition .
Times are tough
@@WoodenShoesHomesteadit bights.
If you tie them right, they bite. 😬
Klemheist works well with flat dyneema slings.
I use it with the secured foot lock technique.
What length of prusik cord you are demonstrating with. Thanks for sharing.
I use an 8mm×80cm prusik cord on a 11m climbing rope.
@@WoodenShoesHomestead Thx
Thank you
Your welcome glad it was useful to you. Which of the friction hitches do you prefer?
What would be the best friction hitch to attach rope to chain?
I've never heard of this. I can't give you any useful advice as I personally never tried that. Hope it's not for climbing because I doubt it will work reliably due to chain being slippery and not compressable. You probably will get hung up on each link as well.
@@WoodenShoesHomesteadThanks for your response. It's to secure a boat bridle to an anchor chain.
Maybe with the normal prusik hitch (ruclips.net/video/WC9IBgA-iMw/видео.html), that's a symmetrical friction hitch ideal when loading can occur from both directions. You can add or remove wraps when needed. In my sailing days I never attached the anchor with a chain but I used a rope and an anchor hitch. That's the advantage of having no rocks on the bottom of a lake. An issue with knots and hitches is that they often start to react differently when tied in wet rope.
My sisters favorite knot is what I call a gravity knot. About 12 or more half hitches and the sheer weight of the knot holds it together.
If you cannot tie a knot, tie a lot.
What the best hitch for drt climbing with dmm pulley on your opinion?
I use this setup with a distel hitch and a foot ascender: ruclips.net/video/joXYz4p28ug/видео.html
But then you need a rope wrench as well.
@@WoodenShoesHomestead why distel, not vt?
Personal preference. Distel is a bit compacter and has less creep with my combination of rope and prusik cord, but the VT works as well.
I tried these an the last 2 work very well on the same size rope not like the first one the rope has to he smaller.
I usually use an 8mm prusik cord on an 11mm climbing line. But the Schwabisch, klemheist and also the Blake's hitch work in general well if you use the same diameter prusik cord as the climbing line. It also depends on the material of the climbing line.
@@WoodenShoesHomestead I'm not using this knot for climbing .I'm using it on paracord cause the smaller cord is a pain to deal with on the prusik knot.
Oh, like that. Paracord is indeed a bit different. I also use the Blake's hitch with paracord, for example to tighten the lines on a tarp. The advantage with the Blake's hitch (ruclips.net/video/Md0xh7SXbU0/видео.html) is that you can tie it in the tail end of the rope, creating an adjustable loop.
Nice clear demonstration. Do both working ends have to be loaded? Equally? How is that accomplished? What problems are solved by moving to each hitch? What limitations of each? What diameter lines are compatible?
Thank you, glad you liked it!
You can attach a carabiner through the spliced eyes to generated a balanced load on both strands and that will also prevent the hitch from becoming undone. If you want a hitch that works well with one strand you should look into the Blakes hitch: ruclips.net/video/Md0xh7SXbU0/видео.html
The Klemheist works very well with the secured foot lock technique when climbing.
Prusik cord diameter depends on the material of the Prusik cord being used. Some are more flexible then others. This can easily be tested by folding the cord and checking the loop that forms when doing so. The smaller the loop the more flexible the cord, the bigger the loop the stiffer the cord. Flexible Prusik cord grabs easier and can therefore be thicker compared to less flexible cord.
In the video I use 8mm Prusik cord with an 11mm climbing line. For me that works very well.
When secured foot locking on a double rope I use 11mm Prusik cord.
which one is best for backing up a rapell ?
The prusik is a very reliable friction hitch for this. It is very easy to tie as well. The backup knot should be tied below your rappel device. For easy access, nothing is more frustrating than the friction hitch being just out of reach. (Been there) And for load sharing with the rappel device.
Do u need a zigzag or any fancy equipment attached to it if u use a prusik
That is not necessary, but a more advanced setup will make life easier. Body thrusting up a tree with only a prusik is doable but very hard on the body. Climbing aids like a rope wrench and a foot ascender will make climbing much easier.
good
Thank you, which of the three do you prefer?
Great way of showcasing how to make them, but I'm missing some demonstration of the properties that each hitch.
Thanks for the feedback. We will make some separate video's on that topic in the future.
Cool very cool
I know and very practical as well 🧗
I use these all the time tying down aircraft.
That is also an option. I use them mostly for climbing but of course they are not limited to that. The Prusik for example can also be used when hanging a tarp and you want to rig it tight.
😊Thanks😊
Glad you liked it and found it useful.
Tali warna coklat apa namanya dan diameternya berapa
It's an 8mm tendon timber prusik cord. I use it on an 11mm climbing line
Schwäbisch is the adjective for describing things from Schwabia, a region in Southern Germany. I suppose that knot came from that region. Prusik is from Austria, not far away. Klemheist sounds pretty Germanic too.
The prusik is usually very tight. I prefer the simple machard (there are variations)
Yes I have the same experience with the Prusik it can be very hard to break especially when wet. The Machard is indeed easier to advance, I also use the Distel hitch often. That one is a bit more advanced then those three easy friction hitches but it has an easier release.
whereis tauntline???
ruclips.net/video/cCtjEafxjNw/видео.html
Exselant
I only use the first one, I just trust it more
The standard prusik is indeed very safe and easy to tie. The disadvantage is that the prusik hitch can be difficult to advance and it sometimes doesn't release very well.
It looks like a hand grabbing the cord.
Better the rope grabbing the rope then your bare hand. You might be in for a serious rope burn 😄
The schwabisch hitch looks like a taut line hitch, but with one extra loop.
Those friction hitches have a lot in common. But the details affect how well they grip in certain situations and want purpose they serve.