Would it be possible to connect the XT16 Trigger to the V1 flash? I set up the V1 on channel 1, A on Manual. The XT16 on the same settings will not fire the flash…
Hi. I got the speedlight Godox V1 Canon Mount. But now i decided to change to Sony Camera. May i know can i connect the speedlight godox canon mount to the sony camera using the godox trigger sony mount wirelessly? Does it work simultaneously?
Is there any limitation of power the flash can go upto with Trigger when in TTL mode? For example- I am shooting in little dark scene, with TTL mode it is going only till 1/32 not higher like 1/4 and result is too under-exposed. Whereas when I attach the flash itself with the camera it is going till 1/4 or even higher with the same scene and with the right exposer. Not sure my trigger is having some issue, or does it work like that only? It must go till 1/1 in TTL too I believe not only till 1/32.
Hi :) I have a quick question: I got the xPro Trigger and the TT-685SII, but I'm having trouble setting the flash to slave mode. I can't seem to switch the mode from Rx to slave on the flash. Do you have any ideas about what I might be doing wrong? Thank you!
Flashes with the term "slave" have old firmware. They changed the wording because of political correctness. If I remember correctly the r in rx stands for receiver and the x no idea
The pairing itself is the same regardless of camera used. I don't have the R50, but Godox flashes work well with my R7 and R6 so I can only assume they will also work with R50. Just make sure you buy Godox made for Canon.
Part 2 of this video is here: ruclips.net/user/shortsz8wOr0--TYg
It's not easy to get the link can please write down again in a link form tnx
@@selameyezelku4010 when you click on the link it doesn't take you to the second video?
@@selameyezelku4010 Please put: Godox Xpro trigger. How to pair second flash [ Part2 ] in the RUclips search and it will show you the second video
Best tutorial on the Godox trigger EVER!! I have had this thing in my bag for over 2 years and now I can finally use it. Thank you!
You're welcome. Please consider subscribing.
Very helpful, your tutorial helped me end my frustration at the user manuals. Thank you 🙏
Your welcome. Thank you for your comment.
OMG THANK YOU!!! The best and shortest video ever.
You're welcome. Please consider subscribing!
Would it be possible to connect the XT16 Trigger to the V1 flash? I set up the V1 on channel 1, A on Manual. The XT16 on the same settings will not fire the flash…
Thank you! Your instructions were simple, short and to the point!
Thank you for your comment.
How do I pair my Godox tt685 with the x-Pro II if I can’t get my flash to the ‘rx’ mode?
If you have an old firmware the RX may be displayed as "slave"
Hi. I got the speedlight Godox V1 Canon Mount. But now i decided to change to Sony Camera. May i know can i connect the speedlight godox canon mount to the sony camera using the godox trigger sony mount wirelessly? Does it work simultaneously?
Yes, the godox speed light for Canon will work with godox trigger for sony as off camera flash. Please consider subscribing.
@@juliankrakow ouh i see, as long as i set it into the same channel and group should be no problem right?
Yes, I am using Canon flash with Panasonic godox trigger.
@@juliankrakow alright! Thank you so much! Done subscribed!
Is there any limitation of power the flash can go upto with Trigger when in TTL mode?
For example- I am shooting in little dark scene, with TTL mode it is going only till 1/32 not higher like 1/4 and result is too under-exposed.
Whereas when I attach the flash itself with the camera it is going till 1/4 or even higher with the same scene and with the right exposer.
Not sure my trigger is having some issue, or does it work like that only? It must go till 1/1 in TTL too I believe not only till 1/32.
@@Vicky-il5yv I only shoot in manual mode so unfortunately I can’t help you with TTL issues.
@@juliankrakow oh.. ok! I need to check it from a different trigger from someone else then.
Hi :) I have a quick question: I got the xPro Trigger and the TT-685SII, but I'm having trouble setting the flash to slave mode. I can't seem to switch the mode from Rx to slave on the flash. Do you have any ideas about what I might be doing wrong? Thank you!
@@felipeibarjeppesen226 with the new firmware the word “slave” was replaced by “rx” but it’s the same thing
@@juliankrakow Thank you for taking the time to reply to my question. You just saved me from spending another 4 hours looking for the answer. lol 🫡
Hi! Do you know if it is the same process to connect to a sony's flash?
Thank you for the video!
Do you mean Godox for Sony or original Sony flash?
@@juliankrakow original Sony flash
@@rafaelauarek1803 The Godox trigger will not work with Sony flash. I am not familiar with Sony triggers and flashes so I can't help you. Sorry.
You've already helped me a lot! Thank you so much! Cheers from Brazil! Haha
@@rafaelauarek1803 Obrigado. Please consider subscribing to my channel.
I'm using the Canon Speedlite EL-1 wiht hte XPROII C, but it isn't working. I am not sure what's wrong.
I don't think you can use Godox trigger with original Canon lights. You need to match Godox trigger with Godox flash for Canon.
@@juliankrakow thanks. This explains why it isn't working. I spent my whole day trying to get it to work - to no avail.
My transmitter says "slave" and it won't change to "rx". What can I do???
It's the same thing. RX came with a new firmware to introduce politically correct term.
@@juliankrakow thanks! Then I really have no idea why the flash isn't working remotely! 🤷
hey, i have the same flash, do you know what the rx actually means?? ive seen slave written on some other flashes insted of the word rx
Flashes with the term "slave" have old firmware. They changed the wording because of political correctness. If I remember correctly the r in rx stands for receiver and the x no idea
@@juliankrakow ohh thanks
@@ryan__dcosta Please consider subscribing.
So, is that the Canon R7 that you paired that trigger with?
Yes, it is.
Will this work with the EOS R50?
The pairing itself is the same regardless of camera used. I don't have the R50, but Godox flashes work well with my R7 and R6 so I can only assume they will also work with R50. Just make sure you buy Godox made for Canon.
@@juliankrakow Thank you! This is much appreciated. I am looking in to the market planning to buy Godox Xpro C and pair it with TT350C.
@@JoeeeBoyPlays Please consider subscribing.
does it have to be godox flash??
Yes, you need both the trigger and the flash to be from Godox.
Life saver, thank you!!
You're welcome. Please consider subscribing.
Thank you!! Your video helped.
You’re welcome, please consider subscribing.
Thank you!! So simple
Please consider subscribing.
What’s the name of the flash
Godox TT685 II for Canon. Link in the description.
Thank you very helpful
I'm glad I could help. Please consider subscribing.
Thank you so much!
You're welcome. Please consider subscribing!
Nice bro❤
Cheers! Please consider subscribing.
excellent video.
Thank you. Please consider subscribing.
Thank you cause I was confused lol
You’re welcome. Please consider subscribing.
Thank you.
You're welcome. Please consider subscribing.
Thank you!!
You’re welcome. Please consider subscribing.
Thank you
Thank you for watching.
Obrigado
You’re welcome. Please consider subscribing.
I didn’t work on your video ….
Lasy effort, not helpful.
Use manual is near useless, way too many icons and settings to quickly get comfortable with.
Hope you found my explanation useful. Please consider subscribing.
Slow down!!! I get it you not teaching but slow down!!
@@ryanhinton8842 Sorry, it’s difficult to fit all the info into this short reel
Thank you!!
@@sfphoto1726 please consider subscribing