Excellent - like a lot of photographers, I'm just getting over my fear of off-camera flash and I have the same kit. Will try this and post a follow up comment.
Great Video 👍, I have 2 Flashes, SB 700 (Nikon) and Godox TT600 (Universal), My Camera is Nikon D7100, I want to use both Flashes for Studio Photo, which Trigger shoud I buy that compatible to both Flashes mentioned in Nikon D7100 Camera ?
Thanks for watching ... You have to olace the tranceiver of Nikon flash on the X2T trigger which will be mounted on the hot shoe of the camera... Otherwise you place both speedlights off camera and make the godox triggered when the Nikon will be triggered...
Good review, thanks! I took 2 pcs tt600 + X2t. Everything is fine, BUT! SOS! how can I turn off the constant flashing of the A/F backlight on the risers in sync mode? I looked through everything and didn't find any information.
could you please give me more details for the setup that you need ? If i understand correct you have 2 speedlights , one Neewer and one Godox and you have a Neewer trigger .. For this setup make the Godox to get triggered from the Neewer flash . This means that when the Neewer speedlights flashes the Godox will flash as well
EXCELLENT! QUESTION: How to activate the TT600 (attached to camera hotshoe) when pressing the shutter button - when "radio" or "optical" sync is not used. IOW, without a GODOX (or other brand) radio "trigger", and without any remote flash units acting as "master". I thought that by using "optical" sync, I could use the onboard pop up flash on my camera, but it doesn't fully open since it collides with the TT600. PLEASE ADVISE, thanks!
PLEASE ASSIST TT600 arrived today, and I've tried it on both my Canon 7D Mark II and my Canon T3, in Manual, and with power ON, yet, both cameras displayed the same message: "External flash func. settings ! This menu cannot be displayed. Incompatible flash or flash's power is turned off". What's the problem? How does one fix that? MANY thanks in advance!
On the camera's [Flash function settings] or [External flash func. setting] screen, you can configure normal shooting, radio transmission wireless shooting, or optical transmission wireless shooting settings.. try to change these options and see if it works
Hi everyone, is any possibility to connect tt600 by power wire? Not to camera, just to power adapter/charger or something. To stop using battery at home, and use power from the wall socket (of course by adapter) Ps: This is my first light, and is amazing. Thanks
So both of the flash need to be in Slave mode only? What if i want to make one of the flash as master, attach on body & another one as slave? Just change to master?
No, the TT600 speedlights do not support TTL auto flash exposure operation. They are manual power control only. You can adjust the TT600 power level from the trigger and when the TT600 will also operate in HSS mode when off-camera
Excuse me if this is silly, I’m just a noob 😊 In the video, the transmitter showed TTL as an option for both speedlites. So… I thought the Transmitter does the evaluation and sends the correct values to the speedlites. Right? If not, what do the speedlites do when TTL is turned on in the transmitter?
Check this video ruclips.net/video/RJczK0Sq22I/видео.html if you want to connect without trigger . If you problem is that trigger doesnt connect with speedlights,follow the video from scratch,replace batteries and let me know
i will make a video on this .... for now follow the below Attach everything. Turn everything on. On camera , set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS. On the X2T, press MENU to enter the custom function menu. Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD. Press MENU again to exit the C.Fn menu (I think). Make sure the TT600 and X2T are set to the same channel. Assign a group on the TT600. On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off. Press the Group button again, and turn the wheel to set the power level/FEC for the group. Set the shutter speed on your camera into the HSS/FP range.
Thank you, and Yes, I mean to place the speedlight on the trigger, it works separately but as soon as I mount it in the X2T all the set up is not working, including the adjusted power of the flash light.
i will make a video on this ... for now follow the below and let me know Attach everything. Turn everything on. On the camera, set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS. On the X2T, press MENU to enter the custom function menu. Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD. Press MENU again to exit the C.Fn menu (I think). Make sure the TT600 and X2T are set to the same channel. Assign a group on the TT600. On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off. Press the Group button again, and turn the wheel to set the power level/FEC for the group. Set the shutter speed on your camera into the HSS/FP range.
sir godox tt685 aur x2 trigger hai , flash camera me attach karane pr high sync hota hai .lekin trigger se high sync nahi hota hai black ata hai .trigger me high sync option ata hai lekin flash high sync nahi hota hai ye kam kaise kare? reply jarur derna
i will make a video on this ... for now follow the below Attach everything. Turn everything on. On camera, set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS. On the X2T, press MENU to enter the custom function menu. Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD. Press MENU again to exit the C.Fn menu (I think). Make sure the TT600 and X2T are set to the same channel. Assign a group on the TT600. On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off. Press the Group button again, and turn the wheel to set the power level/FEC for the group. Set the shutter speed on your camera into the HSS/FP range.
If you put a flash on the trigger's hot shoe will all three then go off? I need a flash on the camera at parties where it's dark and I'm moving around but want 2 other flashes to go off mounted on stands around the room.
The TT600 is not compatible with the id setting (not the channel/group). Go into the x2t scorll down to "ID", choose set and scroll the wheel until you see "OFF". Choose "OFF" then . With the flash set to wireless [S], and the same GROUP and CH the x2t should trigger the flash that worked for me. The key is to set the ID in the X2T to "OFF" as the TT600 does not support ID. Hope this helps it took me awhile to figure that out. The TTL functions will still not work as the TT600 is not compatible with TTL.
I can't understand why they would put a hotshoe on the X2t when you can use a master and slave flash setup with the built-in receivers of Godox flashes. .. Any idea why the hotshoe?
allows the pass-through feature allowing you to attach a flashgun to the top and trigger other flash far away that master slave mode wouldnt trigger visually
The TT600 can achieve 1/8000s High-Speed Sync functions when used in combination with high-speed triggers e.g. Godox Cells II transceiver, X1 TTL wireless flash trigger, etc. Note: HSS triggering mode is not available when the TT600 is mounted onto the camera . Hit H button icon until you see an H and a thunder on the screen
@@MyPhotoVideoLab you know exposure simulation. When you put trigger or flash with TTL. Your exposure on screen give you preview that not exactly with your setting. I usually using manual flash & manual trigger that my exposure i can control if i put shutter 1/80 preview will be white if i put shutter 1/200 preview will be dark. I brought new X2T just now and the exposure give me preview whenever i put shutter 1/10 or 1/200 it give me standard preview before i snap
Thanks for your comment..i had to make it short but easy to follow... pause the video to make it at your needs..or slow the speed of the video .click at the gear sign and select speed
@@silentsniperfx6849 once oyu set the channels and groups it connects.. You can verify by pressing manual the trigger and check if the speedlight flashes
Is there a problem with adding audio instructions so we don’t have to keep pausing the video and trying to figure out what button you pushed. This is ridiculous.
If you find this video useful say thank with a coffee buymeacoffee.com/myphotovideolab
Sure
To the point video ... This coffee is from me my friend
Thank you for a short, easy to understand and follow guide. Absolutely perfect!
Thanks my friend!!!
Thanks, that was painless and to the point! This thing looked complicated as soon as I put the batteries and turned it on!!!
I happy you liked the video..Cheers
Thanks a lot for your video. Exactly I bought recently this combination and save me time for the first test.
Glad i helped you!Happy new year!
Excellent - like a lot of photographers, I'm just getting over my fear of off-camera flash and I have the same kit. Will try this and post a follow up comment.
Thanks!
Thanks for this. Amazingly simple to follow.
Thanks for watching
Great Video 👍, I have 2 Flashes, SB 700 (Nikon) and Godox TT600 (Universal), My Camera is Nikon D7100, I want to use both Flashes for Studio Photo, which Trigger shoud I buy that compatible to both Flashes mentioned in Nikon D7100 Camera ?
Thanks for watching ... You have to olace the tranceiver of Nikon flash on the X2T trigger which will be mounted on the hot shoe of the camera... Otherwise you place both speedlights off camera and make the godox triggered when the Nikon will be triggered...
@@MyPhotoVideoLab Thanks ☺
That was helpful.....but I still can't get my trigger to talk to my flash. Both are set to group A channel 1, radio slave, M. Ugh.
did u figure it out?
💥 Thank You 😊 you coveted all of the functions and straight to the point 😊
Thanks for watching
thanks bro. does it work with nikon as your's one is cannon? also don't I need to create any ID for the flash sunc?
Good review, thanks! I took 2 pcs tt600 + X2t. Everything is fine, BUT! SOS! how can I turn off the constant flashing of the A/F backlight on the risers in sync mode? I looked through everything and didn't find any information.
Unfortunately you cant
@@MyPhotoVideoLab Lamps shine in the face of customers, I'll have to use scotch tape
After the research i have done many others use this solution
Just the video I needed...thanks!
Thanks for watching
Can u sync tt560 with tt600 ? With a 560 trigger or I need x2t trigger ?
could you please give me more details for the setup that you need ? If i understand correct you have 2 speedlights , one Neewer and one Godox and you have a Neewer trigger .. For this setup make the Godox to get triggered from the Neewer flash . This means that when the Neewer speedlights flashes the Godox will flash as well
Thank you. Very easy to follow.
Thanks for watching !!!
EXCELLENT!
QUESTION: How to activate the TT600 (attached to camera hotshoe) when pressing the shutter button - when "radio" or "optical" sync is not used. IOW, without a GODOX (or other brand) radio "trigger", and without any remote flash units acting as "master".
I thought that by using "optical" sync, I could use the onboard pop up flash on my camera, but it doesn't fully open since it collides with the TT600.
PLEASE ADVISE, thanks!
Is there any option for extenral flash at the menu?
how do you set it on your camera to use the trigger? thanks
Just attach the trigger on the hot shoe of the camera
Perfect guide, thank you.
Thanks for watching !!!
Thank you so much, keeping it short
Thanks !!!
Lovely. THANK YOU!
Thanks for watching!!!
PLEASE ASSIST TT600 arrived today, and I've tried it on both my Canon 7D Mark II and my Canon T3, in Manual, and with power ON, yet, both cameras displayed the same message: "External flash func. settings ! This menu cannot be displayed. Incompatible flash or flash's power is turned off". What's the problem? How does one fix that?
MANY thanks in advance!
On the camera's [Flash function settings] or [External flash func. setting] screen, you can configure normal shooting, radio transmission wireless shooting, or optical transmission wireless shooting settings.. try to change these options and see if it works
@@MyPhotoVideoLab Thank you
Thanks for sharing! Good tutorial!
Thanks for watching !!!
Hi everyone, is any possibility to connect tt600 by power wire? Not to camera, just to power adapter/charger or something.
To stop using battery at home, and use power from the wall socket (of course by adapter) Ps: This is my first light, and is amazing.
Thanks
I want to use a third flash on camera. Is there a video on using 3 flashes instead of just 2?
The proccess is the same like using 2 speedlights..
@@MyPhotoVideoLab so the flash that will be on the camera is the C channel?
@@tunderwood9928 Speedlights must be at different groups but on same channel
@@tunderwood9928 if you mean C on the trigger yes that correct
So both of the flash need to be in Slave mode only? What if i want to make one of the flash as master, attach on body & another one as slave? Just change to master?
Yes you can try this ... 😜 I will make a video for this subscribe for more
I cant get the red light from the flash to turn off. Help please
sirbe el xt2 para mi canon m50?
Yes
When you use the trigger, can you use TTL with TT600 by either placing it on top of the trigger / off camera flash?
No, the TT600 speedlights do not support TTL auto flash exposure operation. They are manual power control only. You can adjust the TT600 power level from the trigger and when the TT600 will also operate in HSS mode when off-camera
@@MyPhotoVideoLab Thanks. I was hoping the trigger can send the relevant info to a manual mode and it will change accordingly :D
Excuse me if this is silly, I’m just a noob 😊
In the video, the transmitter showed TTL as an option for both speedlites. So… I thought the Transmitter does the evaluation and sends the correct values to the speedlites. Right? If not, what do the speedlites do when TTL is turned on in the transmitter?
The transmitter supports ttl but not the speedlights..if you use o other model of Godox with ttl then it should work
I've connected mine before but lately it doesn't want to connect with each other I'm using similar devices. What could be the problem?
Check this video ruclips.net/video/RJczK0Sq22I/видео.html if you want to connect without trigger . If you problem is that trigger doesnt connect with speedlights,follow the video from scratch,replace batteries and let me know
Howzit mate, I kept working on it until I realised that it wanted me to turn off the ID. I did and it worked and never gave me problems.
@@saahhomeboy1863 thanks for the feedaback!
Please help. I bought a TT600 flashlight for my Canon 800d camera and it did not work for me. What is the problem? Please help.
Did you contact Godox support ?
Do you know why Speedlight is not working HSS when it is attached to the trigger?
You mean that you placed the speedlight on the trigger ?
i will make a video on this .... for now follow the below
Attach everything. Turn everything on.
On camera , set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS.
On the X2T, press MENU to enter the custom function menu.
Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD.
Press MENU again to exit the C.Fn menu (I think).
Make sure the TT600 and X2T are set to the same channel.
Assign a group on the TT600.
On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off.
Press the Group button again, and turn the wheel to set the power level/FEC for the group.
Set the shutter speed on your camera into the HSS/FP range.
Thank you, and Yes, I mean to place the speedlight on the trigger, it works separately but as soon as I mount it in the X2T all the set up is not working, including the adjusted power of the flash light.
@@morozco85 ok let me try this and i will reply to you asap
i did follow the steps but mine still not connecting . mt x2Tc can't connect to my TT600 what should i do?
What's your camera ? Have you placed the trigger switched off on your hot shoe mount ?
i will make a video on this ... for now follow the below and let me know
Attach everything. Turn everything on.
On the camera, set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS.
On the X2T, press MENU to enter the custom function menu.
Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD.
Press MENU again to exit the C.Fn menu (I think).
Make sure the TT600 and X2T are set to the same channel.
Assign a group on the TT600.
On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off.
Press the Group button again, and turn the wheel to set the power level/FEC for the group.
Set the shutter speed on your camera into the HSS/FP range.
Why does the camera icon not pop up on my x2t? How do I fix that
What camera do you use ?
sir godox tt685 aur x2 trigger hai , flash camera me attach karane pr high sync hota hai .lekin trigger se high sync nahi hota hai black ata hai .trigger me high sync option ata hai lekin flash high sync nahi hota hai ye kam kaise kare? reply jarur derna
i will make a video on this ... for now follow the below
Attach everything. Turn everything on.
On camera, set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS.
On the X2T, press MENU to enter the custom function menu.
Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD.
Press MENU again to exit the C.Fn menu (I think).
Make sure the TT600 and X2T are set to the same channel.
Assign a group on the TT600.
On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off.
Press the Group button again, and turn the wheel to set the power level/FEC for the group.
Set the shutter speed on your camera into the HSS/FP range.
@@MyPhotoVideoLab my camera model nikon d7200 ..
Hago todos los pasos y no logro sincronizar, la luz roja del flash no deja de estar intermitente 😢
Thanks for watching !
How many volts of AA battery is applicable for this trigger? 1.2 or 1.5? which one
The trigger takes 2 AAA batteries... 1.5 V
@@MyPhotoVideoLab you may use 1.2 V and battery for use will be 2 AA batteries
If you put a flash on the trigger's hot shoe will all three then go off? I need a flash on the camera at parties where it's dark and I'm moving around but want 2 other flashes to go off mounted on stands around the room.
Try placing the trigger on camera and on the trigger place the speedlight.the other 2 place them on stands
In slave mode the red light keep flashing. Do you know how to stop that ??
Newer models let you update the firmware and let you turn the light off, but not the TT600. It's possible to cover with gaffer tape/etc
Thank you… seriously.
Thanks a lot!!!
I have godox tt600 , combine with wireless trigger can I shoot beyond 1/250th ? without seeing the blackbar
i have the tt600, if i ll buy the x2t does the ttl will work ? or also the flash needs to have ttl ?
Ese flash no tiene ttl, necesitas un flash con ttl
I was triying to changfe the zoom setting of tt600 onm my sx2t trigger but its not adjusting.. is it normal?
Do you have such option on the trigger ? Send me a screenshot
How can i set my godox tt600 for 2 light setup without slave. Cuz everytime i fire 1 speedlight the other fires too
If I've my camera drive in "burst" (multiple exposures) mode, (Canon 7D Mark II), will the flash flash each and every time a shot is taken?
Sooooo...... I just got a TT600 & X2T Trigger. Neither are working with my Canon Rebel T6i. Can someone help??? Thanks in advance
I have the same issue with my eos60D. i don't think the x2t is compatible
@@Jack87504 same with my m50 mark ii and their not commenting back to help us
Its compatible guys..
@@MyPhotoVideoLab Then why doesn't it work?
The TT600 is not compatible with the id setting (not the channel/group). Go into the x2t scorll down to "ID", choose set and scroll the wheel until you see "OFF". Choose "OFF" then . With the flash set to wireless [S], and the same GROUP and CH the x2t should trigger the flash that worked for me. The key is to set the ID in the X2T to "OFF" as the TT600 does not support ID. Hope this helps it took me awhile to figure that out. The TTL functions will still not work as the TT600 is not compatible with TTL.
Show me how to auto iso with camera
OK
Thank you so much!!!
Thanks for watching !!!
High speed sync is there ?
Yes,it supports High sync speed
Is the x2t compatible with canon m50 mark ii?? I’m having trouble with it connecting with my camera can someone help
As far as i know is compatible.. could you plz describe the issue?
I can't understand why they would put a hotshoe on the X2t when you can use a master and slave flash setup with the built-in receivers of Godox flashes. .. Any idea why the hotshoe?
allows the pass-through feature allowing you to attach a flashgun to the top and trigger other flash far away that master slave mode wouldnt trigger visually
I tried, but maximum Shutter Speed was 1/250 only. How to increase more?
The TT600 can achieve 1/8000s High-Speed Sync functions when used in combination with high-speed triggers e.g. Godox Cells II transceiver, X1 TTL wireless flash trigger, etc. Note: HSS triggering mode is not available when the TT600 is mounted onto the camera . Hit H button icon until you see an H and a thunder on the screen
Thank you very much
Thabks for watching
On screen after i put trigger on hotshoe i see flash icon appear. I cant set exposure manually. Can i set manually my exposure?
Yes you can set your exposure manually..Do you follow the unstructions? Give me more info plz
@@MyPhotoVideoLab you know exposure simulation. When you put trigger or flash with TTL. Your exposure on screen give you preview that not exactly with your setting. I usually using manual flash & manual trigger that my exposure i can control if i put shutter 1/80 preview will be white if i put shutter 1/200 preview will be dark. I brought new X2T just now and the exposure give me preview whenever i put shutter 1/10 or 1/200 it give me standard preview before i snap
I did every step and still can’t connect them.
same problem....maybe someone has a solution
Try setting ID value to OFF from settings.
@@josuem1072 Thanks. Your suggestion works. 🤩
My flash will not go off and I do not understand why
Could you please more info ?
Excelente explicação, muito obrigado 👌👍🇧🇷
I am glad that helped you...
Tnxx❤️
Thanks for watching !!!
MAKASII BANG MY PHOTO LAB,, KVI JADI BISA FOTO
For some reason, I'm still not getting it to work
Follow the instructions step by step my friend.do you gwt an error on the speedlight or something?
They work in sync with each other. But not while using my camera 😭😭😭😭😭
Saaameeee
I'm slower and the presentations too quick for me.
Thanks for your comment..i had to make it short but easy to follow... pause the video to make it at your needs..or slow the speed of the video .click at the gear sign and select speed
How to fix camera icon in the trigger? ..
Make sure you turn on the camera and afterwards the trigger ... let me chwck the manual
Camera icon means camera connection...
How do you make sure it's connected to the camera?
@@silentsniperfx6849 once oyu set the channels and groups it connects.. You can verify by pressing manual the trigger and check if the speedlight flashes
@@stmusicGR I got it figured out. Hot & cold shoe weren’t getting a good connection due to my cameras cage. Thanks!
Eos rp???
Yeap
SO THE FLASHES HAVE TO BE IN SLAVE MODE!!!!!! I WISH YOU WOULD HAVE EXPLAINED THAT BRO :( FAIL!
isn't it already explained with the S mode
Pde nakong bumili pera nalang kulang HAHA
Is there a problem with adding audio instructions so we don’t have to keep pausing the video and trying to figure out what button you pushed. This is ridiculous.
In my case,i prefer watching videos with subtitles sometimes , so dont be mean...