Видео

It has to do with GPU ... Recently o got new laptop with 8gb dedicated ram for graphics and I get no errors

Thanks for watching!

Check this video as well ruclips.net/video/RJczK0Sq22I/видео.html&ab_channel=MyPhotoVideoLab

I checked dji store and at this moment is unavailable. But as far as I know soon it will be available again for a while

Thanks for watching !!!

Following video will answer your question..stay tuned...

Thanks for watching !!

Thanks for watching

This trick may be ok for simple setup , if you need to make more "pro" setups and results then you have to go with the V1 , X2t or X3

@@davejsy1 sorry to hear that ... Unfortunately older laptops can't keep up with the newer softwares . There is high CPU and GPU need ...

Let me check this and I will let you know

Thanks for watching !

Sure yes!!!

Thanks for watching!!!

Turn Flash on Press 2 center buttons on top row, just below the screen. One button on each side of RST. Hold both buttons down at the same time. The flash will beep and screen will say reset

@@MyPhotoVideoLab gonna try it

Definitely EOS M6 mark ii ... It's a fantastic camera .. light portable combined with the 22mm canon lens it's super ... 32.5 MP sensor ... I had the M100 once upon a time it's good but M6 is better ...

Thanks for watching and for your comment ! Cheers !

Thank you so much! I'm thrilled to hear that you loved the review! It was a pleasure working with your product !

"S1" and "S2" typically refer to two different slave modes. These modes allow the speedlight to be triggered wirelessly by another flash. S1 Mode (Manual Slave Mode): In S1 mode, the speedlight is triggered by the first flash it detects. This mode is used when the master flash is set to manual mode and does not emit any pre-flash. The S1 mode ensures that the slave flash fires simultaneously with the master flash. S2 Mode (Pre-Flash Cancel Slave Mode): In S2 mode, the speedlight is designed to ignore the pre-flash emitted by the master flash and only fire in sync with the main flash. This is useful when the master flash is set to TTL (Through The Lens) mode, which typically involves a pre-flash for metering purposes. S2 mode ensures the slave flash does not fire prematurely due to the pre-flash, resulting in correct exposure.

@@MyPhotoVideoLabim using the strob mode. And after a minute or two the flash is off and says SL in the center after the screen. And i press pilot and it on again. Is there something i can do to keep it on the whole event?

@@moufitsa1985 could you please sent me a photo of the screen?

Check this video ruclips.net/video/RJczK0Sq22I/видео.html if you want to connect without trigger . If you problem is that trigger doesnt connect with speedlights,follow the video from scratch,replace batteries and let me know

Howzit mate, I kept working on it until I realised that it wanted me to turn off the ID. I did and it worked and never gave me problems.

@@saahhomeboy1863 thanks for the feedaback!

@@kenaustria3125 which settings actually do you need? I have on the sample photos the aperture and shutter settings if you mean that

@@MyPhotoVideoLab The settings from the camera in general. Manual mode to be specific. not the three exposure settings.

Basically i try not to shoot under 1/250 to avoid shaky photos.if there is need for more light i increase iso and keep aperture wide open .. at the camera i have not changed any other settings or profile pictures...are the default ..

@@MyPhotoVideoLab thank you

@kenaustria3125 welcome

Windows or apple?

Thanks for watching !

Indeed..very budget friendly

Thanks for watching

Just attach the trigger on the hot shoe of the camera

I agree ... But we prefer original products for many reasons.. support . Warranty ...

Thanks for watching! enjoy

You can put aftermarket straps as well , but that is your choice of course ...

Thanks!

Yes you can try this ... 😜 I will make a video for this subscribe for more

I am afraid that you cant do that

Unfortunately you cant

@@MyPhotoVideoLab Lamps shine in the face of customers, I'll have to use scotch tape

After the research i have done many others use this solution

Thanks for watching ... You have to olace the tranceiver of Nikon flash on the X2T trigger which will be mounted on the hot shoe of the camera... Otherwise you place both speedlights off camera and make the godox triggered when the Nikon will be triggered...

@@MyPhotoVideoLab Thanks ☺

H

What's your camera ? Have you placed the trigger switched off on your hot shoe mount ?

i will make a video on this ... for now follow the below and let me know Attach everything. Turn everything on. On the camera, set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS. On the X2T, press MENU to enter the custom function menu. Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD. Press MENU again to exit the C.Fn menu (I think). Make sure the TT600 and X2T are set to the same channel. Assign a group on the TT600. On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off. Press the Group button again, and turn the wheel to set the power level/FEC for the group. Set the shutter speed on your camera into the HSS/FP range.

Yes indeed

You mean that you placed the speedlight on the trigger ?

i will make a video on this .... for now follow the below Attach everything. Turn everything on. On camera , set custom function e1 to one of the Auto FP settings (page 305 of the user manual). FP = focal plane sync = high-speed sync/HSS. On the X2T, press MENU to enter the custom function menu. Use the SET button and wheel to select the SYNC function, and set it to HSS. The H/lightning bolt icon should now show on the LCD. Press MENU again to exit the C.Fn menu (I think). Make sure the TT600 and X2T are set to the same channel. Assign a group on the TT600. On the X2T, press the Group button (A/B/C, etc.) for the group you assigned to the TT600, and repeatedly press MODE to set that group to TTL, M, or off. Press the Group button again, and turn the wheel to set the power level/FEC for the group. Set the shutter speed on your camera into the HSS/FP range.

Thank you, and Yes, I mean to place the speedlight on the trigger, it works separately but as soon as I mount it in the X2T all the set up is not working, including the adjusted power of the flash light.

@@morozco85 ok let me try this and i will reply to you asap

Sad to hear that my friend :( .I will make it lower at the next videos ...

Hi. I know it's not in the compatibility list but since it is a Mirrorless, can it fit well in an Olympus EM-10 MARK IV?

@CretanTraveller I cannot guarantee that you will face issues ... The only that I can think is that you will not be able to connect it with the cable to control the camera,recording etc,from the gimbal...

@@MyPhotoVideoLab Hm thanks!

@CretanTraveller thanks for watching

Sure

To the point video ... This coffee is from me my friend

Thanks !!!

Thanks for the comment

Thanks for the comment

Thanks