Godox X3 Trigger: amzn.to/3P2A3zo Godox AD600 Pro: amzn.to/4bQNPil Godox V860 III: amzn.to/4bTL1AX Get your Doubt Me merch at DoubtMe.com/Apparel Follow @TheHyphenate & @DoubtMeTech on social platforms
Hi, as I am into real estate photography, I am mainly concerned about one thing: Nobody mention it, is the "square" icon at the bottom middle clickable? Does it "pause" the controller so the camera thinks there is no flash attached? Is there a way to make camera think there is no flash attached apart from turning off and on the controller (pain in the a..). I need that to be able to tell if exposure for e.g. windows is correct or not...
My camera is not detecting the trigger. Any idea on what could be happening? The camera settings are set for flash, I can connect the flash and it works, but it does not detect the trigger... The camera icon does not appear on the trigger, nor the flash icon in the camera...
I can not get my v860 II to fire not even as a slave when im using wireless trigger. My godox200 pro easy and I can use my Neewer speedlite as a slave but my V 860 only on the top of my camera What am I not getting 😅 Thanks for sharing ❤
Thanks for this video. Quick question: does the sync mode works across all the battery load in the camera or it has to be on a minimum % so that it works?
Hey very nice go to the point video 🎉. Have you been experiencing issues with HSS ? I normally used ss320, 400 SS the nano only allows me to take one or two shots then the HSS disconnected from nowhere. Please let me know if you know anything about it.
Godox X3 Trigger: amzn.to/3P2A3zo
Godox AD600 Pro: amzn.to/4bQNPil
Godox V860 III: amzn.to/4bTL1AX
Get your Doubt Me merch at DoubtMe.com/Apparel
Follow @TheHyphenate & @DoubtMeTech on social platforms
2nd time that I need to see this video to pair my Godox X3, great explanation ✌️
Happy to help. Thanks for watching 🙏🙏
as a beginner with trigger and flash, thank you so much for this video.
Happy to help. Thanks for watching 🙏🙏
you've saved me. Trigger was misfiring so bad and then I changed it to channel 7 as you mentioned and it's working great again :) thanks
Happy to help. Thanks for watching 🙏🙏
This was super helpful! Thank you!
Happy to help. Thanks for watching 🙏🙏
Helpfully. thank you!
Happy to help. Thanks for watching 🙏🙏
🙌🏼🙌🏼 thank you
Happy to help. Thanks for watching 🙏🙏
Is this trigger u using fit to sony a7iv. Because other godox trigger xpro bit tight on hot shoe
it works a lot better than the old trigger.
Hi, as I am into real estate photography, I am mainly concerned about one thing:
Nobody mention it, is the "square" icon at the bottom middle clickable? Does it "pause" the controller so the camera thinks there is no flash attached?
Is there a way to make camera think there is no flash attached apart from turning off and on the controller (pain in the a..). I need that to be able to tell if exposure for e.g. windows is correct or not...
Necesito ayuda con la sincronización de este disparador pero con el flash godox tt685s ¿Alguien puede ayudarme?
My camera is not detecting the trigger. Any idea on what could be happening? The camera settings are set for flash, I can connect the flash and it works, but it does not detect the trigger... The camera icon does not appear on the trigger, nor the flash icon in the camera...
I can not get my v860 II to fire not even as a slave when im using wireless trigger. My godox200 pro easy and I can use my Neewer speedlite as a slave but my V 860 only on the top of my camera
What am I not getting 😅
Thanks for sharing ❤
How's the fit with the hot shoe. Is it ready tight? My X pro is really tight on the sony a7iv
Yeah. It feels nice and snug
@DoubtMeTech when you say snug, does that mean you have to really push and pull to put on the Xnano or does that mean it slips in nicely?
@@marcusmurray5440 not really. It shouldn't be that hard. Make sure to take off the lock.
Do you know if it works for a tt600?
Thank you so much for this video. Insert baby reading book gif before I clicked on this video.
Happy to help. Thanks for watching 🙏🙏
It's so hard for me to get compatibility information. I want to use the 860iii with the X3-S on my A7iv but i need to know that it will work 😭
Yes it does. I use that exact setup
What if you don’t want it on TTL? Like the flash settings not the trigger settings
Put flash on M, not TTL
Thank you for the video! One quick question: can I use it with x1r+canon speedlight 580 ii?
Thanks for this video. Quick question: does the sync mode works across all the battery load in the camera or it has to be on a minimum % so that it works?
Great fast explanation thank you so much for sharing 🎭
Happy to help. Thanks for watching 🙏🙏
I was not able to connect to V850 ii, can you help me?
I have the same problem with V860ii 😢
Thank you very much
Happy to help. Thanks for watching 🙏🙏
can u do a video for bowens xmt500?
Hey very nice go to the point video 🎉. Have you been experiencing issues with HSS ? I normally used ss320, 400 SS the nano only allows me to take one or two shots then the HSS disconnected from nowhere.
Please let me know if you know anything about it.
THANK U
Happy to help. Thanks for watching 🙏🙏
My x3 with my z8 is overexposes by almost an entire stop when using tcm
Channel settings in a group of changing the mode to be activated on defaulted
🙏🙏
@@DoubtMeTech No problem bro
Great video. Have you tried TCM while in TTL mode?
I tried it with my z8 and it is off by an entire stop. Overexposes by 1 stop
My x3 overexposes by almost an entire stop when using tcm
Do you know if it works with flash godox V860ii?