Get a TopDon Phoenix Elite Here! www.topdon.us/collections/professional-series/products/phoenix-elite?ref=DKOii7zD3k5PUe Check out my Amazon Store! www.amazon.com/shop/advancedleveldiagnostics Godiag GT100+ OBD CAN Breakout Box amzn.to/3Nk2Fmv Digital Oscilloscope with 2 Channels amzn.to/3sll63d
Super job!! My hats off to you,when something doesn't start, that what separates the great mechanics from the average mechanic!!! Keep up the great work,5 years from now you'll have 100000 subscribers,ill probably have 2000,lol!!!!
Actually the term is mechanic from technicians. As a master tech we deal with technical things instead of just parts changing. There’s a difference. But as a tech myself I enjoy seeing other colleagues like yourself take pride in our craft and I’m not the only one. Hats off to you!!!!
Wow, I couldn't stop watching this, I got this video randomly from youtube, and was fascinated to see how a real professional mechanic works. I Subscribed immoderately.
Crazy Camry! Don't see PCM failures too often on Asian cars...except Nissan trucks LOL I've seen one Corolla bad PCM after it sat for months...was definitely hesitant to call the PCM but the data doesn't lie!
This was my first time on this age Camry finding a bad computer, I guess that's why they were $18 on eBay. I was really not confident it was the problem, that's why I checked it on the bench.
If you connect the Godiag to the ECM and the blue LEDs from pin 6 and pin 14 aren't flashing, you do not need to check it anymore. It is simply dead. On some GM ECM models, you have to connect the accessory pin to 12V also on the bench. Nice video by the way.
Can you do a little video explaining the little jumper tool from Jarhead diagnostics and what its purposes? Thanks brother. And is it a Toyota thing or work on all vehicles?
I'll make a video later, It's pretty much just a jumper for pn 13 to pin 4 on the DLC. It is for Toyota and Lexus. When you leave those pins Jumped it syncs the Immo of the car with the Module that was replaced.
I like your problem solving pace and your ability to not stumble at dead ends. You should be a dad or a mentor. More kids need to learn from people like you
Wow i got completley lost half eay through but thats soke serious skill can you give me any pointers as im starting intot he world of diagnostics where do i start very good video my man !!! 😊
It jumps pin 13 to pin 4 on the data link connector. (which is just grounding pin 13) The only cars I know that need this Immo sync are Toyota & Lexus.
Did this car come with an immobilizer? I’m having the same problem. I put the key in, car won’t crank or anything. I checked all relays and fuses and they are reading within spec no blown fuses. The cars radio, clock, a/c, power seats, and turn signals aren’t working, but the fuses are fine. Now the car won’t communicate through obd2 port with scanner and obd fuse is functioning. Do you think this could be the ECU/ECM? It’s a 2007 Camry.
@advancedleveldiagnostics what was the little orange box you used to reset the computer, I am fixing a 04 with the same issues but I can’t find the name of the little box you used to do the reset with. My girls car been broke down for 6 months so if I can get that thing running again with a simple computer swap and reset we’d be golden, cus my Mazda has a busted head gasket. I’d rather spend 2 hours fooling with a computer then 4 days fooling with a engine strip down and reseal 😭😭
It just jumps pin 13 to pin 4 on the OBD connector. It syncs the Immo data. It is from jarhead diagnostics, it is not necessary you can jump it with a wire or paper clip. I'm not sure if an 04 camry requires it to be jumped or not.
That is power for the Throttle, that fuse blows many times when you boost it backwards. I've seen many times that fuse blown and the PCM communicates. Thanks for watching!
The only part got confused on is when you said that the control side of the relay that turns on first EFI2 is coming from the computer, then why further checks if the constant and ignition powers and grounds and comm to pcm are good? That should be enough to call a computer?
You are correct, I was getting thrown off by the clicking in the fuse box and the aftermarket wiring. Also I've never seen a bad computer on this year camry.
So fast on providing site final conclusion, with fully equipped tools and knowledge. Thanks for thr videos, last 15 days we haven't get any videos from your end. Waiting
Hi at 10:30 timesacale, you are using an adapter to ATC mini fuse to power the line manuallly, what is this called please and where can i buy it.. basically you removed ATC mini fuse and put an adapter inpalce of that fuse and powered it manually, i am looking to get one .. appreciate your help.
They are from Aeswave, they came in the uTest terminal kit, Here is a link for them by themselves www.aeswave.com/Fuse-Amp-Loop-with-Voltage-Tap-p9653.html
I have a similar breakout box. It sure is handy I sometimes use it to catcha module that wont go to sleep/ parasitic draw.I just put it on and I check it occaisionally while working on other cars. Takes 2 seconds and you dont have to babaysit it. At least it will Identify which network it is on
Super job dude! Helped me find the problem with my girls 04 Camry simple fuses n shit. Was having the same cranking no start. But what’s the coolent puddle at the bottom of the engine on ur vid there about 5 mins into video
I really like your setup. You just taught me about wire piercing probe. Thanks so much I’m gonna have to get them. Who taught you all this btw? You seem like you got a phd 😂
Is it correct to say u r using an external power and ground supply to c if the computer powers up and communicates? If so, why don’t u use the car battery to do the same thing? I will watch again and c what u did. Thank u!!
If your using it for on the bench work it's fantastic. If you want to use it as a regular break out box in the vehicle, it's a little cumbersome for that. I would use a cheap amazon one for that.
@@advancedleveldiagnostics it looks like it would also be a great way to confirm a bad computer when we are not 100% convinced that it has failed. I ordered one off the Canadian Amazon site. Pretty reasonable imo. Thanks for the video.
I'm using Pico leads which I got from Jarhead Diagnostics, They are kind of pricey. www.jarheaddiag.com/shop/p/premium-test-lead-bnc-to-4-mm-3-m Hantek makes very affordable leads amzn.to/4ap0dFd
Your videos are becoming INTERESTING days after days. The secret behind it is you are showing full wiring diagram showing the WIRING DIAGRAMS very clearly. That is what personally interested me in your video. Good work bro!
In my years of diagnostics I believe that jump seem to be more like a flash/ type hard reset thus making to be factory settings. Just years doing so on the Jap vehicles I’ve done had to do so.
Get a TopDon Phoenix Elite Here!
www.topdon.us/collections/professional-series/products/phoenix-elite?ref=DKOii7zD3k5PUe
Check out my Amazon Store!
www.amazon.com/shop/advancedleveldiagnostics
Godiag GT100+ OBD CAN Breakout Box
amzn.to/3Nk2Fmv
Digital Oscilloscope with 2 Channels
amzn.to/3sll63d
Super job!! My hats off to you,when something doesn't start, that what separates the great mechanics from the average mechanic!!! Keep up the great work,5 years from now you'll have 100000 subscribers,ill probably have 2000,lol!!!!
Thanks for your support Jeff! Your channels doing great too, love all the reviews!
Actually the term is mechanic from technicians. As a master tech we deal with technical things instead of just parts changing. There’s a difference. But as a tech myself I enjoy seeing other colleagues like yourself take pride in our craft and I’m not the only one. Hats off to you!!!!
Wow, I couldn't stop watching this, I got this video randomly from youtube, and was fascinated to see how a real professional mechanic works. I Subscribed immoderately.
Thank you so much!
More os a Professional automotive diagnostician than a mechanic
Damn bro. You went thru that schematic like a boss!
Thanks for watching!
Now thats some advanced level diagnostic right there. Thanks for sharing the knowledge.
Glad to help!
Crazy Camry! Don't see PCM failures too often on Asian cars...except Nissan trucks LOL
I've seen one Corolla bad PCM after it sat for months...was definitely hesitant to call the PCM but the data doesn't lie!
This was my first time on this age Camry finding a bad computer, I guess that's why they were $18 on eBay. I was really not confident it was the problem, that's why I checked it on the bench.
New subscriber here. Diffenitely some next level diagnostics! I will bench watch all your videos. Cheers!
Thanks you, I appreciate it!
Wow this guy is pretty sharp on Electrical Diagnostic probably the Best I've seen on RUclips.
Thought this was advanced level auto.... ooops
Love the way you explained what direction you are taking for diagnosis. Another awesome job
If you connect the Godiag to the ECM and the blue LEDs from pin 6 and pin 14 aren't flashing, you do not need to check it anymore. It is simply dead.
On some GM ECM models, you have to connect the accessory pin to 12V also on the bench.
Nice video by the way.
Can you do a little video explaining the little jumper tool from Jarhead diagnostics and what its purposes? Thanks brother. And is it a Toyota thing or work on all vehicles?
I'll make a video later, It's pretty much just a jumper for pn 13 to pin 4 on the DLC. It is for Toyota and Lexus. When you leave those pins Jumped it syncs the Immo of the car with the Module that was replaced.
@@advancedleveldiagnostics sweet
What kind of scope is that little blue 1 you use bro? If you don't mind me asking. Thanks in advance
amzn.to/4afP2OB
Thanks bro you are the best amigo G bless you
The moment that I saw missing battery I knew right away it was a bad ECU…
They fried it while trying to mess with the dead battery …
I like your problem solving pace and your ability to not stumble at dead ends. You should be a dad or a mentor. More kids need to learn from people like you
Thanks! I don't know about a mentor but I am a dad.
Wow i got completley lost half eay through but thats soke serious skill can you give me any pointers as im starting intot he world of diagnostics where do i start very good video my man !!! 😊
I would recommend @ScannerDanner. Try his Scanner Danner premium; that's how I got started. For $11 a month, I don't think you can beat that.
This is called step by step checking until you reach the fault.
He is superb.
Thanks!
well done, took a lot to narrow down the problem, but one plug in module and vin reset and its running again. nice job.
Thanks! I got a little off track because I didn't stick with my process, at least I got there in the end.
Unplug relays one at the time until the clicking stops. 16:39
السلام وعليكم عندي نفس المشكله تويوتا كامري موديل 2008 وارد أمريكي أربعه سلندر اريد حل وشكرا
Question, what does that adapter from jarhead diagnostics actually do and is that just for toyotas?
It jumps pin 13 to pin 4 on the data link connector. (which is just grounding pin 13) The only cars I know that need this Immo sync are Toyota & Lexus.
@@advancedleveldiagnostics so just reading down through the comments so when it grounds pin 13 for 30 minutes what exactly does that do?
@@advancedleveldiagnostics Thanks. Good video!
when all the fuse was good. i knew it was a bad computer
105K and already needed a computer. Sad
Did this car come with an immobilizer? I’m having the same problem. I put the key in, car won’t crank or anything. I checked all relays and fuses and they are reading within spec no blown fuses. The cars radio, clock, a/c, power seats, and turn signals aren’t working, but the fuses are fine. Now the car won’t communicate through obd2 port with scanner and obd fuse is functioning. Do you think this could be the ECU/ECM? It’s a 2007 Camry.
What you figure out? I have the same problem
@advancedleveldiagnostics what was the little orange box you used to reset the computer, I am fixing a 04 with the same issues but I can’t find the name of the little box you used to do the reset with. My girls car been broke down for 6 months so if I can get that thing running again with a simple computer swap and reset we’d be golden, cus my Mazda has a busted head gasket. I’d rather spend 2 hours fooling with a computer then 4 days fooling with a engine strip down and reseal 😭😭
It just jumps pin 13 to pin 4 on the OBD connector. It syncs the Immo data. It is from jarhead diagnostics, it is not necessary you can jump it with a wire or paper clip. I'm not sure if an 04 camry requires it to be jumped or not.
job is professional
Lol cant fix it without an expense scanner
So what was wrong? bad internal computer? and what does the jumper do? Im not a mechanic haha just pure curiosity.
Yes the computer was bad. The jumper was to sync the immobilizer data to the new computer.
What is the model # of that tester kit?
You were in alldata.. I don't understand why you didn't look up where that relay was. That threw me off
I tried for about 10 min off camera and couldn't find it.
greetings , can that leolov scope be use to check injector voltage waveforms ( with attenuations of course)
I never actually tried it, But I don't see why it shouldn't
Why not just first check the relay.instead of pinching the wire .
I was not able to find the relay easily, It's integrated in the box.
Thanks for your effort...
Was it intentionally you ignored pin 3 light green?
That is power for the Throttle, that fuse blows many times when you boost it backwards. I've seen many times that fuse blown and the PCM communicates. Thanks for watching!
@@advancedleveldiagnostics I did not know that. Thanks for the tip. 👌
The only part got confused on is when you said that the control side of the relay that turns on first EFI2 is coming from the computer, then why further checks if the constant and ignition powers and grounds and comm to pcm are good? That should be enough to call a computer?
You are correct, I was getting thrown off by the clicking in the fuse box and the aftermarket wiring. Also I've never seen a bad computer on this year camry.
Well explanation, what's the name of that machine that you used to test power
It's an H11 light bulb the case is from Jarhead Diagnostics.
www.jarheaddiag.com/shop/p/highamptestlight
So fast on providing site final conclusion, with fully equipped tools and knowledge.
Thanks for thr videos, last 15 days we haven't get any videos from your end.
Waiting
Hi, I need all the tools you used. How can I get
There are links in the description of the video.
Good video , but to get to the results faster,
start @ 14 mins in
Thanks 👍 u save 10 mins
Thanks for watching. The point of my channel is the process of diagnosing the issue, not just the fix at the end.
All that research just to realize it jumped timeing u need a new motor
you would still need to get it to start, if you put a new motor in it.
Try to talk clearly mate
You are chowing your words
Thanks for the feedback.
Hi at 10:30 timesacale, you are using an adapter to ATC mini fuse to power the line manuallly, what is this called please and where can i buy it.. basically you removed ATC mini fuse and put an adapter inpalce of that fuse and powered it manually, i am looking to get one .. appreciate your help.
They are from Aeswave, they came in the uTest terminal kit, Here is a link for them by themselves
www.aeswave.com/Fuse-Amp-Loop-with-Voltage-Tap-p9653.html
@@advancedleveldiagnostics Thanks so much, just bought it. you should set some affiliate lnk with Aeswave and get some % ..
Wow where can i learn how to do this im like a B level diagnostic i wanna get to this level
I started with @ScannerDanner, He teaches the fundamentals really well!
nice job
all you need is a factory service manual or at least a wiring diagram of the exact year/model car. no need for an expensive scanner
I have a similar breakout box. It sure is handy
I sometimes use it to catcha module that wont go to sleep/ parasitic draw.I just put it on and I check it occaisionally while working on other cars. Takes 2 seconds and you dont have to babaysit it. At least it will Identify which network it is on
Where did you get that bench test setup?
amzn.to/4cd9e5a
Lol i was just watching and i lost my patience i can only imagine you !
What is you don t like at this little scope or wish something to have ? Thanks !
I'm sorry I don't understand your question, can you rephrase it please?
@@advancedleveldiagnostics Like what could be better than it is : screen , battery life , etc ?
what the name of the obd jumper tool
Toyota Sync Tool
www.jarheaddiag.com/shop/p/toyota-sync-tool
“I’m Indian” . . . Yea, we can tell
???
Hi. Thanks for this great video.
What does pin 14 and 3 jumping do? And where do you get like this specific instructions from?
It syncs the Immo data. I've seen it in Service Info.
Super job dude! Helped me find the problem with my girls 04 Camry simple fuses n shit. Was having the same cranking no start. But what’s the coolent puddle at the bottom of the engine on ur vid there about 5 mins into video
I couldn't find what you were referring to, but the car was in pieces so its possible coolant leaked out.😀
I really like your setup. You just taught me about wire piercing probe. Thanks so much I’m gonna have to get them. Who taught you all this btw? You seem like you got a phd 😂
Thank you! after you pierce the wire cover it with liquid electric tape or clear nail polish so corrosion doesn't get in.
When all else fails replace the computer!
What does OBD pin 13 do? Is that Toyota specific only? Grounding it puts ECM is a diagnostic state?
It's for Toyota & Lexus only, as far as I know. It syncs the Immobilizer to the PCM.
Is it correct to say u r using an external power and ground supply to c if the computer powers up and communicates? If so, why don’t u use the car battery to do the same thing? I will watch again and c what u did. Thank u!!
Yes I was supplying power, ground and communication directly to the Computer. The tool I am using doesn't have an option to connect to cars battery.
Great video.
I used your link to amazon to buy a topdon scan tool and amp clamp to add to my collection, just for good measure.
Awesome, thank you!
Wow, I'm actually learning from this. love it👏👏👏
Glad it was helpful!
What's jumper? How it helps to start engine? Thanks a lot.
It syncs the immobilizer data when you change a PCM.
Where did you get you re experience and or schooling to get this diagnostics skills?
I have no formal training, I got started watching @scannerdanner.
Great video. I saw you in Schrodinger's box cs. 👍🏻
Cool, thanks!
Alot of tools u have that i need. Thanks bro.
Experience diagnosis master mi respect para ustes
Thanks!
So was the old ECU broken? What did you do on the end?
Yes it was broken, replaced with a used one.
I show you using wiring diagram in the scanner does this scanner have that drawing in it
No the diagram is on a computer, it's from AllData.
New to the channel. Nice diag!
Thanks appreciate it!
"I hate after market stuff"! How true it is and I was saying that 45 yrs. ago. lol Nothing has changed when it comes to after market sh%t!
💯!
I'm thinking of buying one of those Godiag breakout boxes. Are you happy with yours or would you recommend something else?
If your using it for on the bench work it's fantastic. If you want to use it as a regular break out box in the vehicle, it's a little cumbersome for that. I would use a cheap amazon one for that.
@@advancedleveldiagnostics Thanks!
What do you call that orange tool where you used to jump pins 13 and 4? From Jar high???
It's from Jarhead Diagnostics
www.jarheaddiag.com/shop/p/toyota-sync-tool
@@advancedleveldiagnostics great videos sir. Also love your tools. Thank you.
What’s the name of the jumper 13 and 4?
www.jarheaddiag.com/shop/p/toyota-sync-tool
Did you use the original terminal wires the godiag came with to plug into the pcm or make your own with the aeswave ones?
I used the AES wave leads, they also make a connector that has banana jack ends and plugs into the go diag.
@advancedleveldiagnostics awesome..gonna order that banana jack cable..never knew about it until i saw your setup
Damn good job young man
Nice Job! Thanks for taking us along for the ride.
Thanks Brian! I'm a long time premium member on your website.
@@advancedleveldiagnostics I appreciate the support! Let me know if you ever want to chat/ live stream.
New sub. Amazing work. 👏
Thank you!
Love the DIY light bulb cover ha
Great approach! I am interested in that breakout box...
Thanks for watching! It works great for bench work.
@@advancedleveldiagnostics it looks like it would also be a great way to confirm a bad computer when we are not 100% convinced that it has failed. I ordered one off the Canadian Amazon site. Pretty reasonable imo. Thanks for the video.
Nice one 👍🏼 ! Thanks for teaching us !!
Nice that is an amazing display of knowledge and use of an amazing tool.
Thanks 👍
Wow sr great work
Nice video!!!! I have the same little 2 channel scope. I need to upgrade the leads. Where did you buy the leads for the scope?
I'm using Pico leads which I got from Jarhead Diagnostics, They are kind of pricey. www.jarheaddiag.com/shop/p/premium-test-lead-bnc-to-4-mm-3-m
Hantek makes very affordable leads amzn.to/4ap0dFd
Thank You for your response. I appreciate it.
great work Amigo htks for sharing
Thanks 👍
Your the man
Thank you , new subscriber
Appreciate it!
Really enjoyed watching this video. Thanks.
Glad you enjoyed it!
Your videos are becoming INTERESTING days after days.
The secret behind it is you are showing full wiring diagram showing the WIRING DIAGRAMS very clearly.
That is what personally interested me in your video.
Good work bro!
Thanks!
@@advancedleveldiagnostics is it bad PCM ?
You're in the top 1% of real mechanics.
Thanks!
Thanks❤
Good job🎉
Very nice
Good work 👍
x10 another great video always ✌
Thanks again!
Thanks for posting.
Great Job buddy, i like your diagnosis approach. Thanks for sharing your knowledge
Thanks for watching!
I didn’t know you can just plug in ground to set diagnostic mode and it will reset Toyota new computer 😱 sooo cool
It works until the new system which started in around 2020, Then you need Techstream and do the ECU security key.
@@advancedleveldiagnostics ahhh of course. Thanks man . I ordered that tool from jarhead I’ve ordered from him before but missed the Toyota plug diag
@@advancedleveldiagnostics so insure it is basically programming the computer to the vehicle?
🔧✌️🔧nice job
Excellent new subscribers
Thank you!
Nice work!!
Thanks!
Crazy! Thanks for sharing this!
Thanks for watching!
How does jumping the OBD2 for half an hour, reprogram or recalibrate the ECM? Thank you.
It doesn't reprogram it. It syncs the Immo data. I don't know how it works, but that's what service info says to do. Thanks for watching!
Isn't it fun when engineers design stuff to slow techs down with repairs?@@advancedleveldiagnostics
In my years of diagnostics I believe that jump seem to be more like a flash/ type hard reset thus making to be factory settings. Just years doing so on the Jap vehicles I’ve done had to do so.