👍🤚Steve great build I was so glad you did not paint it left the pretty wood. Looks great. Some people use word rustic but the paint it antique white. Great music to tap my feet to while watching you build. You have great speaking voice and excellent step by step how to. Couldn’t ask for a better job except for the fact the toy box isn’t being delivered to my house lol heeee. Have a great week until next time take care from Florida 💕
No matter the content, I always enjoy a video from you, Steve! 🏆 I really enjoyed your use of a material that many would have otherwise deemed unusable or people new to the hobby would not have felt comfortable using. Total win!!!
Great project idea, Steve! Simple & rustic, inexpensive, plus quick & easy to build. This type of chest and variations in a variety of sizes would sell easily here in Maine. I always enjoy your videos. Thanks for another great one!
Nope, I bought the ones I have, except I won the nailer from one of their Instagram contests. Finally replaced all my old 90s black and decker cordless stuff.
I like them. They work fine for what I do. I haven't had to use the lifetime warranty yet. Registering them was easy. I think any of the cordless tool families would be fine. I chose Ridgid because of the warranty, they had tools I wanted like the nailer and router, plus with patience I got most of them on sale or on clearance. Also, I tend to get home depot gift cards as presents, so I can use those to add tools.
Steve great looking toy box. I would support the bottom with some cross braces however because I'm sure someone will get inside that eventually. I know I can't keep my kids out of the toy box.
Thanks! The cross braces are a good idea. I attached the bottom with screws to the cleats around the perimeter, but didn't get a clip of that since I was practically in the box myself. lol Someone else suggested using more furring strip pieces for the bottom too.
Steve, Good to see you in the shop again! Nice work building the toy box! Whoever your relative is giving that toy box to, must have some tall kids. The stain over sanding sealer worked out really well. Nice finish! That was a lot of wood you had to pick through to get some decent pieces. I would have asked for a chair to sit on for the time it would take finding some good ones - haha.
Hey Mac! I had to double check the picture I followed because it did seem tall. I'm sure the kids will grow like weeds anyway. I haven't built anything from furring strips before and it was a challenge to find usable ones. I briefly thought about making my own out of 1x12s, but then they wouldn't have that rustic flavor.
Hi Steve! I enjoyed your video very much. I appreciate the quality of your videos and your organization. You make it easy to follow along. Your toy box turned out well. Thank you for the video. Take care.
Seems like a row of those wood strips for the bottom would not only be sturdier (toys are heavy) but would be consistent with the quality of the rest of the build.
That was my initial plan, but then I thought that small toys like Lego pieces would either get stuck or slip through the gaps in the boards. Maybe put the strips down, then smooth hardboard on top. I'll do that if I make another one sometime.
That was a great looking toybox/toolbox!👍 Why do you use wood condition before staining? I've never seen that product before and I'm curious about the how&why.
Hey David, thanks! I always use the wood conditioner when I stain pine. It makes more of a difference on the nicer 1x boards when they are sanded smooth. These furring strips were so rough that it didn't didn't really make much difference.
Is that hardboard going to be sturdy enough for toys? I have 2 boys so I know that particular bottom will not withstand what they will throw at it (literally) or in it. Cool build though!
Hi Janie - Yeah it will be fine. I screwed it in around the edges, but since I was practically in the box while putting in the screws, I couldn't get a good video clip of that. 1/4" plywood would be a stronger choice if needed.
The bottom needs to be strong enough to support all of the children because they WILL get into it (willingly or not). You might attach a block in the middle of the bottom panel to keep the panel from flexing. It will only be seen when the little darlings turn the box over.
First off I know nothing about woodworking so I'm curious about why you chose the base material you did. Is there a reason you wouldn't just use more strips?
Hi Mike - It's the 18 gauge nailer. I used 1-1/4" and 2" nails on this one. I really like the cordless nailer for convenience and no hose attached, but it it slower and heavier than an air nailer. When you pull the trigger, it does a little wind-up before it shoots the nail. The air nailer is more instant when you pull the trigger.
Thanks! I picked through a lot of twisted ones and got the straightest ones I could find. I bought a couple extra just in case but didn't have any problems with that luckily. They were all a little cupped though, but still went together ok.
necesito hacerte la pregunta ... como puedo adquirir el aluminio estructural anodizado color negro que utilizan en el X-CARVE aquí en mi país PERÚ ,es muy complicado conseguirlo ...gracias
Yeah, I screwed the bottom in but didn't show it. 1/4" plywood would be good too. I thought about using the furring strips but though small toys like legos would get stuck or fall through the cracks.
Yes, I always put a link in the video description to more info. You can find all that info here - www.thecarmichaelworkshop.com/2019/02/how-to-make-rustic-toy-box.html
@@SteveCarmichael WOW! that was fast. You're the man. I really loved this video and your extreme enthusiasm. I'm making two of these for my grandchildren :)
What a fun video Steve. They’re sure to like that...best part, no pinched fingers!
Good job Steve. I always enjoy your videos and your way too much energy.
The right thing in Steve's household!
Happiest guy on youtube🤙🏼👊🏻
👍🤚Steve great build I was so glad you did not paint it left the pretty wood. Looks great. Some people use word rustic but the paint it antique white.
Great music to tap my feet to while watching you build. You have great speaking voice and excellent step by step how to. Couldn’t ask for a better job except for the fact the toy box isn’t being delivered to my house lol heeee. Have a great week until next time take care from Florida 💕
Love the hammer
No matter the content, I always enjoy a video from you, Steve! 🏆 I really enjoyed your use of a material that many would have otherwise deemed unusable or people new to the hobby would not have felt comfortable using. Total win!!!
Great project idea, Steve! Simple & rustic, inexpensive, plus quick & easy to build. This type of chest and variations in a variety of sizes would sell easily here in Maine. I always enjoy your videos. Thanks for another great one!
Loved the musical edit on this. Got the tools sounding like part of the song. Nice build Steve.
came out great
Again a great project !!!
Fun project and a simple smart build. That might be fun to use old pallet wood for a rustic look. Thanks.
As usual, nice work Steve.
Thanks Tom!
I hope Ridgid is sponsoring your videos. Just got my first Ridgid tools this past Christmas. Looking forward to putting them to good use soon.
Nope, I bought the ones I have, except I won the nailer from one of their Instagram contests. Finally replaced all my old 90s black and decker cordless stuff.
@@SteveCarmichael They need to sponsor you then. How do you like the tools?
I like them. They work fine for what I do. I haven't had to use the lifetime warranty yet. Registering them was easy. I think any of the cordless tool families would be fine. I chose Ridgid because of the warranty, they had tools I wanted like the nailer and router, plus with patience I got most of them on sale or on clearance. Also, I tend to get home depot gift cards as presents, so I can use those to add tools.
Steve great looking toy box. I would support the bottom with some cross braces however because I'm sure someone will get inside that eventually. I know I can't keep my kids out of the toy box.
Thanks! The cross braces are a good idea. I attached the bottom with screws to the cleats around the perimeter, but didn't get a clip of that since I was practically in the box myself. lol Someone else suggested using more furring strip pieces for the bottom too.
Great video. I absolutely enjoy all your videos.
Thank you very much!
Nice simple project Steve!
Hey Keith, thanks!
Looks good! Thanks.
Thanks Steve. Might do one of these myself soon!
Great video! Turned out nice
Great Video ! I Always Look Forward To Projects Coming Out Of The Carmichael Workshop !
Hey man! Thanks! Good to finally get a video done after a long break.
Great idea for a gift project and one that would work well using recycled material like pallet wood. Good Job.
Thanks Tom, yeah, it would be good for pallet wood as long as it wasn't poisonous. lol
Steve, Good to see you in the shop again! Nice work building the toy box! Whoever your relative is giving that toy box to, must have some tall kids. The stain over sanding sealer worked out really well. Nice finish! That was a lot of wood you had to pick through to get some decent pieces. I would have asked for a chair to sit on for the time it would take finding some good ones - haha.
Hey Mac! I had to double check the picture I followed because it did seem tall. I'm sure the kids will grow like weeds anyway. I haven't built anything from furring strips before and it was a challenge to find usable ones. I briefly thought about making my own out of 1x12s, but then they wouldn't have that rustic flavor.
Awesome project , looks great
Thanks Shaun!
Good job.
Great video, thanks for sharing.
Thank you!
Great to see a new video brother! Fun project. Cheers, Chris.
Really fun project. Did a great job. I'll need to try it
Hi Steve! I enjoyed your video very much. I appreciate the quality of your videos and your organization. You make it easy to follow along. Your toy box turned out well. Thank you for the video. Take care.
nicely done young steve
Nice project Steve! Thanks for sharing the video.👍😎JP
Great video steve awesome easy too follow along video thanks buddy
Great project Steve. Enjoyed the build a lot.
Great project Steve, you make it look so easy!!!
Another great video. I was hoping you were going to add the hinge to stop it from falling on little fingers.
He did at 06.00
@@cliffcarlo180 Yep. I worded my comment poorly. "I was hoping and glad to see he did it" is how I should have worded it.
@@BronkBuilt No worries @BronkBuilt
Nice one Steve it looks great, well done.
Barry (ENG)
Hey Barry, thanks!
Awesome project Steve! Someone is going to get a lot of use out of that. Well done.........
Thanks! Yeah, from what I hear there are toys everywhere at their house. lol
Love this project! Thank You for sharing, I appreciate all that you do.
Hey Steve another nice project. Well done.
Thanks Tommy!
Great project Steve...👍
Seems like a row of those wood strips for the bottom would not only be sturdier (toys are heavy) but would be consistent with the quality of the rest of the build.
That was my initial plan, but then I thought that small toys like Lego pieces would either get stuck or slip through the gaps in the boards. Maybe put the strips down, then smooth hardboard on top. I'll do that if I make another one sometime.
Nice job. I might have to try this one. :)
That was a great looking toybox/toolbox!👍 Why do you use wood condition before staining? I've never seen that product before and I'm curious about the how&why.
With pine it helps the stain soak in evenly to avoid dark blotches.
Great video Steve!!
Thank you very much!
Great project. What did you think about that pre-stain wood conditioner stuff? I’ve never used any.
Hey David, thanks! I always use the wood conditioner when I stain pine. It makes more of a difference on the nicer 1x boards when they are sanded smooth. These furring strips were so rough that it didn't didn't really make much difference.
Well done Steve! Are you going to woodworking show in March?
Thanks John! Yes, I will be at the Atlanta show probably on Sat/Sun. Haven't decided if I want to take a vacation day off work to go on Friday.
Great Steve, share on Facebook 👍👏👏👏👏👏👏💓
Is that hardboard going to be sturdy enough for toys? I have 2 boys so I know that particular bottom will not withstand what they will throw at it (literally) or in it. Cool build though!
Hi Janie - Yeah it will be fine. I screwed it in around the edges, but since I was practically in the box while putting in the screws, I couldn't get a good video clip of that. 1/4" plywood would be a stronger choice if needed.
The bottom needs to be strong enough to support all of the children because they WILL get into it (willingly or not). You might attach a block in the middle of the bottom panel to keep the panel from flexing. It will only be seen when the little darlings turn the box over.
I like the block idea.
First off I know nothing about woodworking so I'm curious about why you chose the base material you did. Is there a reason you wouldn't just use more strips?
Great project could you tell me what gauge your nail gun is your using on this build please
Hi Mike - It's the 18 gauge nailer. I used 1-1/4" and 2" nails on this one. I really like the cordless nailer for convenience and no hose attached, but it it slower and heavier than an air nailer. When you pull the trigger, it does a little wind-up before it shoots the nail. The air nailer is more instant when you pull the trigger.
@@SteveCarmichael Thanks for replying
That is a very nice, but still simple, project.
Did you have any problems with the firring strips twisting on you?
Thanks! I picked through a lot of twisted ones and got the straightest ones I could find. I bought a couple extra just in case but didn't have any problems with that luckily. They were all a little cupped though, but still went together ok.
@@SteveCarmichael Even when I pick straight lumber, it tends to twist once I get it home.
necesito hacerte la pregunta ... como puedo adquirir el aluminio estructural anodizado color negro que utilizan en el X-CARVE
aquí en mi país PERÚ ,es muy complicado conseguirlo ...gracias
Order it here - www.inventables.com/categories/machine-components/extrusions?ref=CarmichaelWorkshop
Did you use a router to do a round over it anything
I don't think I did. The boards are already rounded over like 2x4s.
Great job but I need to work outside the box haha . Had to say it .
Thanks Frank! Keep staying outside the box. There will be plenty of time to think in a box later. lol
anyone wondering if the bottom will hold just add a cross brace in the center since its got the other pieces that the bottom sits on.
Yeah, I screwed the bottom in but didn't show it. 1/4" plywood would be good too. I thought about using the furring strips but though small toys like legos would get stuck or fall through the cracks.
I always add air holes. We don’t want accidents.
Good idea! There are lots of gaps between the strips and top, as long as you don't edge glue them all together.
do you have links for the hinge parts?
Yes, I always put a link in the video description to more info. You can find all that info here - www.thecarmichaelworkshop.com/2019/02/how-to-make-rustic-toy-box.html
@@SteveCarmichael WOW! that was fast. You're the man. I really loved this video and your extreme enthusiasm. I'm making two of these for my grandchildren :)
Awesome work Steve! 👍🏻👊🏻