You can get by with using a table saw in place of a jointer if you know what you're doing. For a DIY just building your own you won't need a planer either if you're getting your wood from a box store. This guy is probably making them to sell.
I love it. I'd use wood screws and wood glue in place of those brad nails but it was a quick effective build. I see some guys complaining about the jointer and planer but if your getting your wood from a big box store you really don't need them. Looks like he's refurbishing wood that may be warped or a bit damaged. You can use a table saw in place of a jointer if need be. Believe it or not people used to do that by hand. They still sell those exact hand tools at any box store and are affordable.
Looks great, I just noticed your lock was installed incorrectly, Screws should be behind the metal. Otherwise anyone can remove 3 screws and open chest apart. I like that you used planer and sander to make the wood looking perfect. Good way to repurpose the pallets. I will definitely try it and recycle my pallets
Careful with your selection of pallet wood, not all is equal, pallets painted should be avoided as they contain chemicals in the material. Also pay attention to stamps on the outside of the pallets, avoid those labelled MB, MBL or MLB as they contain methyl bromide
I agree with you it looks great, but I think the bottom is not strong enough. The bottom is only held by some nails. Any more weight in that storage chest and the bottom will come off.
That's the least of his worries, the bottom will drop out as soon as anything is stored in it, also would have been nice to see a bit of glue used, the large screws concealed, and sprayed behind the catch. 👍
I want this to be my first project. I love how you did the sides not too sure on the top and bottom though I might want to reinforce the bottom part and the top sharper cuts so they fit tight up against each other over all this is the easiest way I've seen it done.
Love this. Waiting for my wood work shop to arrive soon. Can’t wait to get started on a new hobby. Going to definitely try this. Only problem is that it is very hard to find pallet wood in my area.
It’s one of the best pallet wood projects I’ve seen in a while. Thank you for sharing. However, no glue and no screws? I can’t see that box lasting long.
I like the concept, but if you are planning on keeping anything heavy in it for any length of time, your bottom is going to fall out. The bottom needs to be reinforced with something other than staples or brad nails.
It's a brilliant box and great to watch. I'm still looking forward to seeing these types of things being done with minimal tools coz the fancy expensive power tools are out of reach for a lot of people.
Thank You for sharing!! It is really awesome work and come back to it to build one just like it. It would be perfect for right by my bed for linens and things.
I made a foot locker box for my nephew using all sorts of scrap wood that came from a wood bed, part of my brother in law's garage he tore down, some came from a pallet. I made it work and it came out great. From a guy that didn't know what he was doing. Now I have a air nailer the next box I made came out even better. I don't have a planer so all my box's look ruststic looking.
It looks pretty neat, but the handles on the side are not able to be used to lift it. But the jointer makes the roughness go away, I used my handplaner just last week for the first time and I was baffled how beautiful wood turns out after you plane it. Doing it 'yourself' is really an experience ;)
Sloe wine is delicious! We have an abundance of them here in Ireland, and I generally wait until after the first frost to pick them, as it's supposed to turn some of the harsh starches into sugar. I have 2 recipes, one which includes a home made red wine, so I try to save some sloe wine for this. Dangerously nice!
I love drinking wine during a project using power tools! I don't get to do it so much anymore. Might have something to do with the reason people call me "lefty" now.... 🙂
Guy has an awful lot of faith in a brad nailer and doesn't like glue, evidently. I would have stained it before attaching the hardware, but that's just me.
You're taking them apart wrong. You gotta use leverage to lift them off the nails. You'll get a number of split ends, but if you cut those off you have mostly usable wood.
I watch a lot of these videos and it never fails, they don't fill in the mail holes with wood filler, I would take a little more pride in my work and do that! To me it's like they are more interested in making them fast than nice!
I would say this man here looks like he takes pride in his work and think the project looks really nice. Just because someone doesn’t use your methods doesn’t mean there’s no pride taken.
I love it when the pallet recycling videos start out with, "First, put the wood through your professional grade joiner and planer!"
I've seen people do it with cheap jointers and planers and it looks good too
Me too everyone has these tool don’t they?
You can do the same thing with a sander or use just sanding paper. 🤣
Ho pensato la stessa cosa, e lo stavo scrivendo. Tutto troppo facile.
You can get by with using a table saw in place of a jointer if you know what you're doing. For a DIY just building your own you won't need a planer either if you're getting your wood from a box store. This guy is probably making them to sell.
Alot of hateraide on here- It's pallet wood. The man took trash and repurposed it into something that can be used.
Right! People acting like they want that chest to hold a dying sun in there 😂
Love it, I would've used glue along with your fasteners for a more sturdy and long lasting build. Ty for the upload.
Yup! My kind of project! No words needed in this video! Perfect!
It’s nice to hear people explain what they’re doing and how to do it.
Nice project. I like how you used so many wood jointing techniques. It gives us hope that we too can build a wood chest.
i'm just jealous coz you make a wonderfull job bravoooooooooo beautifull , good job
عمل رايع ونا سويته في المنزل. طلع شغل مرتب شغل نضيف نضيف 👌👌♥️🥰🥰
Cool box. Liked the chisel wobble technique for hinge recesses and all of the other techniques.
Very Nice Chest and Makes a Great Heirloom for a Family to pass on.
It’s pretty and decorative . It won’t last long though if you actually use it.
@@TeddyR_Official if wood glue was used, maybe a bit longer.
But with using all brad nails I was thinking just the same.
Bravissimo falegname ! complimenti e un cordiale saluto da Luciano il perugino (Italia) 😀🍀
I love it. I'd use wood screws and wood glue in place of those brad nails but it was a quick effective build. I see some guys complaining about the jointer and planer but if your getting your wood from a big box store you really don't need them. Looks like he's refurbishing wood that may be warped or a bit damaged. You can use a table saw in place of a jointer if need be. Believe it or not people used to do that by hand. They still sell those exact hand tools at any box store and are affordable.
Looks great, I just noticed your lock was installed incorrectly, Screws should be behind the metal. Otherwise anyone can remove 3 screws and open chest apart. I like that you used planer and sander to make the wood looking perfect. Good way to repurpose the pallets. I will definitely try it and recycle my pallets
Careful with your selection of pallet wood, not all is equal, pallets painted should be avoided as they contain chemicals in the material. Also pay attention to stamps on the outside of the pallets, avoid those labelled MB, MBL or MLB as they contain methyl bromide
I agree with you it looks great, but I think the bottom is not strong enough. The bottom is only held by some nails. Any more weight in that storage chest and the bottom will come off.
That's the least of his worries, the bottom will drop out as soon as anything is stored in it, also would have been nice to see a bit of glue used, the large screws concealed, and sprayed behind the catch. 👍
I want this to be my first project. I love how you did the sides not too sure on the top and bottom though I might want to reinforce the bottom part and the top sharper cuts so they fit tight up against each other over all this is the easiest way I've seen it done.
Love this. Waiting for my wood work shop to arrive soon. Can’t wait to get started on a new hobby. Going to definitely try this. Only problem is that it is very hard to find pallet wood in my area.
Felicitaciones, muy práctico y elegante, trataré de hacerme uno igual. Gracias y que Dios lo colme de sabiduría. 🙏🙏💪💪
Very nice project. Very inspirational. I can think of a hundred ways to utilize and change this project. Thanks for you idea and inspiration.
It’s one of the best pallet wood projects I’ve seen in a while. Thank you for sharing. However, no glue and no screws? I can’t see that box lasting long.
I thought the same so trawled the comments to see if anyone else agreed, Glue, Glue, Glue !
كلش حلو وشغل مرتب وبسيط و رائع 👏 👏
I like the concept, but if you are planning on keeping anything heavy in it for any length of time, your bottom is going to fall out. The bottom needs to be reinforced with something other than staples or brad nails.
Should have at least used glue
@@jameschester3986 Exactly. I was thinking the same thing throughout the build. Nice box though.
I think atleast some screws and glue would add alot more strength to the project, but the build was good.
It's a brilliant box and great to watch. I'm still looking forward to seeing these types of things being done with minimal tools coz the fancy expensive power tools are out of reach for a lot of people.
Semplicemente stupendo!!!! complimenti bravissimo!!!👏👏👏
Thank You for sharing!! It is really awesome work and come back to it to build one just like it. It would be perfect for right by my bed for linens and things.
Complimenti!!! Molto bella, vedrò di copiare il progetto!!
Precioso👏👏👏👏me enamoro el cofre de mis sueños 😍
Fantastic good job! Greetings from México
You make a lot of interesting furniture that i have seen out pallets you are the best.
ROCCO
Simple and beautiful 🇵🇸❤️🕊
I love it
Respect and love from Jerusalem Palestine 🇵🇸
Increíble que buen trabajo Amigo.. saludos desde Argentina
Best DIY video I’ve seen
Thank you
beautiful job i hope i can make one as good as yours
Super brawo 👋👋👋👍👍👍
WOW that's beautiful 😍
Nice job & fun project.
This is a great video to base projects off of
it seems like some one already had an encounter with a saw -- woow -- keep up the good work congrats
I can't finish any project whatsoever until I baptise it in my blood. :-(
Excelent video
Direct like from România
This was helpful thank you
simple, just what Ive been looking for
Belíssimo 🎉🇧🇷
Çok güzel oldu sandık halika 👏👏👏👍👍👍🇹🇷🇹🇷🇹🇷
I made a foot locker box for my nephew using all sorts of scrap wood that came from a wood bed, part of my brother in law's garage he tore down, some came from a pallet. I made it work and it came out great. From a guy that didn't know what he was doing. Now I have a air nailer the next box I made came out even better.
I don't have a planer so all my box's look ruststic looking.
It looks pretty neat, but the handles on the side are not able to be used to lift it. But the jointer makes the roughness go away, I used my handplaner just last week for the first time and I was baffled how beautiful wood turns out after you plane it. Doing it 'yourself' is really an experience ;)
Excelente trabajo !!! Un saludo de uruguay🇺🇾
Darling oak and more furniture would be nice too
Really impressive! Nice decorative piece
I like it! Good Job.
Parabéns ótimo trabalho....grande abraço do Brasil 🇧🇷
This is nice. Just what i was thinking of making and now i see how to do it .
mil likes, good job
Sloe wine is delicious! We have an abundance of them here in Ireland, and I generally wait until after the first frost to pick them, as it's supposed to turn some of the harsh starches into sugar. I have 2 recipes, one which includes a home made red wine, so I try to save some sloe wine for this. Dangerously nice!
I love drinking wine during a project using power tools! I don't get to do it so much anymore. Might have something to do with the reason people call me "lefty" now.... 🙂
Excellent work 👍👍👍
very nice project. I might give this one a try.
鍵の下、ステイン塗れていないけれどもニッコニコなところに民族性が伺えてほっこり。
Kaunis arkku. 👍👏
I wouldn't trust putting much weight in it with those finish nails holding the bottom boards on.
Great job must make my own version of your design Greetings fae Scotland 🏴
Good job. Spray paint / dye before adding the hardware & hasp fixings need to be behind the plate for security.👍
Very nice work 😎
Nice! 🙂
Very creative,nice job
Awesome. Now you just need to fill it with treasure and bury it on an island😀
Viendo sus videos e aprendido mucho más de carpinteria, e guardado muchos de sus videos para hacerlos
I love it, great job and thank you so much for the wonderful upload........🇦🇺👍🏽👍🏽
Great video and finished product. Most people don't have a jointer or a planer.
You can just use a hand planer, it won’t come out perfectly square but I’ve just finished making one and it’s identical
Gracias felicitaciones y siempre adelante
สวยงาม
Good job
You are excellent
i like it looks good. i think il take some inspiration from this and make a few for some storage
Simple & looks great. Nice work.
Awesome 👏👏👏👏
he is eyeballing everything:)
That is so good
Wow, free handing the curved rabbet like a boss! good work, like it a lot but why no glue?
Guy has an awful lot of faith in a brad nailer and doesn't like glue, evidently. I would have stained it before attaching the hardware, but that's just me.
Nice build
Lindo demais amigão meus parabéns.
Se fosse para mim eu pediria na cor envelhecida esse é meu gosto 👍
Muy bueno, gracias.
I have always wanted to make a trunk, i guess its time i do it. Thanks for sharing.
Idekekkk
Excelente MAESTRO !!
Lindo trabalho parabéns
Great Job. You got it perfect made. Thanks for share.
Yes, it is great work. You must be happy with the results.
Never point a nail gun towards yourself when useing an air nailer otherwise good craftsman ship cool build
Great job! Love it 💚💚
With most pallets you'd be lucky to get four usable pieces of wood.
You're taking them apart wrong. You gotta use leverage to lift them off the nails. You'll get a number of split ends, but if you cut those off you have mostly usable wood.
great work! im going to start wood working soon..what size are the nails?
It's beautiful
AMAIZING!!!!
I LOVE
I kept watching thinking it would get better. This is a great beginners project for sure. Not very good skills, but A for effort.
I love the concept. And i will definitely build one, but ill do it much better! This is some shoddy craftsmanship
so nice very good
Quedo bien hecho el cajón. Saludo de New Jersey.
Hat off to you sir
Lo isiste con mucho Cariño y te quedo muy bonito
I watch a lot of these videos and it never fails, they don't fill in the mail holes with wood filler, I would take a little more pride in my work and do that! To me it's like they are more interested in making them fast than nice!
I would say this man here looks like he takes pride in his work and think the project looks really nice. Just because someone doesn’t use your methods doesn’t mean there’s no pride taken.
@@bodyrot2794 I just feel it would be more appealing to someone purchasing it if there were no nail or screw holes!
@@yourhuckleberry3733 build your own box the way you want. Wtf
Muy bonito baul
Me puedes facilitar las medidas
I like it thanks 👍🏻
Molto bello 💯 👍👍
Good thank you
Muy chulo, y con una pegatina de pirata 👌( es broma ) 👌👍🇪🇸