I love your replacement basepads! The 15rd basepads for the 365 are life changing. I never knew how much I missed that extra grip in the back of the mag until tacticaldev made it whole. Lol. Flat is where it's at!
Just found your site today. Ordered the 10 round 365 conversion to xl length. Saved me a shit ton of money compared to replacing 5 magazines. Can’t wait to get them. Thank you
your 12 & 15 round baseplates for my p365. are Awesome!!! Thank you so much. I just came from the range and tested both out. The pinky 12 round feels nice pulling out of my Vedder! I’m sure matching the proprietary grip texture would have been difficult, but yours is fine for the bottom of my hand. 🎯🔫👈🏾
I ordered two 12-round mags for the P365 ... directly from Sig. I expected Sig quality, meaning that I would get what I ordered, but only ONE of the two came with the sleeve. Obviously I've lodged a complaint and expect them to send me what I am owed for the second mag. BUT ... I also was miffed that there were no instructions in the Sig box ... not even a URL for a video to watch, so I found this one. And now I am about to order two of your sleeves. I'm pretty sure it will be the straight as well. Looks VERY good, and I agree that at least on the one Sig sent the pinky extension doesn't really do much. Shouldn't be putting too much pressure on the pinky anyway. (Might get one of each and then order a second of the one I prefer, keeping the third in reserve.) But I'm not ordering from you because of the straight option (nice as that is). It's because your fit looks so tight and right. Terrible gaps on the factory Sig sleeve. I am SO glad I found you!
Just ordered a flat 12 round base plate, a good idea. I usually carry with just the flat or small pinky extension. The point of the p365 is to be as small as possible.
Excellent video. I'd call attention to your comments from 2:50 to 2:55. You knew folks might not ensure that the 'metal part' was not contacting the extension as you say. I goofed that myself because I focused on compressing the spring and forgot that the metal part has to be seated so that the bottom part will slide on and catch properly. I did catch it (not fully) and then I noticed when I loaded the magazine the gap was a bit too wide. Redid it and paid attention and then the magazine was solid and when inserted the gap was very small. You made a great point, thanks.
Yeah I bought the sig 12 round and put the pinky attachment on. It literally pulled off after install multiple times. My 15 didn’t do that, I switched it back to the flat 12rd base pad. I’ll have to order these next
I bought the straight 12 round base pad and love it. I don't like the curved based pads. They are too far forward and push the mags back causing the mag to move in the gun too much. I'd recommend the straight one to anyone who has a 12 rounder. And it looks way better too.
Can you please make a compatible version of this for the magguts +2 kit for the 12 round P365 mags. As well as a version of the pro ledge for the magguts +2 kit for the og 10 round mags?
Has anyone here tried both the pinky and the straight versions and found a difference? Too much pinky pressure sends me low and left (found after doing those right-hand-only two-finger drills with the middle and ring fingers). I'm thinking that straight isn't just an option to look better, but to shoot better as well. Any experiences out there to share?
There is no wiggle in the factory one if you install it right. I had wiggle in mine and then realized I didn't have it mounted quite right. Reinstalled it and it doesn't move at all now.
sir, i had troubles with mine in that the mag fell out and disassembled when shooting. 2 other times had problems. in seeing these i guess the spring caught like you were saying, but when i called sig about it they said no one else has ever had trouble. now i feel i was given the run around.
Sheepdog Gun Armory in North Las Vegas NV has a few in stock as of today. You can call them at 725-735-4832 and see if they still have any. Great people there.
I feel your pain. I have strong hands, but I still needed to get a Speed Beez loader to make it happen and then follow the advice to just let it sit for a while. They do eventually loosen up.
You comment is very vague. The OEM one wiggles, yes. If you saying basepad you bought from us wiggles please contact our support on the website and we can fix it
Useless - you couldn't even tell if the base pad was seated correctly when YOU installed it so how is a customer supposed to know OR trust it not to 'walk off' for that matter? Doesn't instill much confidence, bro. With a magazine, no surprise is a GOOD surprise. If you're just a range junkie rock out, otherwise don't waste your for something that's not 100% when it HAS to work!
Развлечения
I love your replacement basepads! The 15rd basepads for the 365 are life changing. I never knew how much I missed that extra grip in the back of the mag until tacticaldev made it whole. Lol. Flat is where it's at!
Just found your site today. Ordered the 10 round 365 conversion to xl length. Saved me a shit ton of money compared to replacing 5 magazines. Can’t wait to get them. Thank you
Thx, you answered all of the questions I had in upgrading to the 12 round mag. Great help.
your 12 & 15 round baseplates for my p365. are Awesome!!! Thank you so much. I just came from the range and tested both out. The pinky 12 round feels nice pulling out of my Vedder!
I’m sure matching the proprietary grip texture would have been difficult, but yours is fine for the bottom of my hand.
🎯🔫👈🏾
I ordered two 12-round mags for the P365 ... directly from Sig. I expected Sig quality, meaning that I would get what I ordered, but only ONE of the two came with the sleeve. Obviously I've lodged a complaint and expect them to send me what I am owed for the second mag.
BUT ...
I also was miffed that there were no instructions in the Sig box ... not even a URL for a video to watch, so I found this one. And now I am about to order two of your sleeves. I'm pretty sure it will be the straight as well. Looks VERY good, and I agree that at least on the one Sig sent the pinky extension doesn't really do much. Shouldn't be putting too much pressure on the pinky anyway. (Might get one of each and then order a second of the one I prefer, keeping the third in reserve.)
But I'm not ordering from you because of the straight option (nice as that is). It's because your fit looks so tight and right. Terrible gaps on the factory Sig sleeve. I am SO glad I found you!
I liked the look of the straight option. ordered 2 of them. thanks for getting this video out.
Oh man, I love the flat one! Thank you Reddit for a heads up about you guys!
Just ordered a flat 12 round base plate, a good idea. I usually carry with just the flat or small pinky extension. The point of the p365 is to be as small as possible.
Just picked up 2 of the straight extensions. Thank you for the video
Excellent video. I'd call attention to your comments from 2:50 to 2:55. You knew folks might not ensure that the 'metal part' was not contacting the extension as you say. I goofed that myself because I focused on compressing the spring and forgot that the metal part has to be seated so that the bottom part will slide on and catch properly. I did catch it (not fully) and then I noticed when I loaded the magazine the gap was a bit too wide. Redid it and paid attention and then the magazine was solid and when inserted the gap was very small. You made a great point, thanks.
Digging that flat design
Yeah I bought the sig 12 round and put the pinky attachment on. It literally pulled off after install multiple times. My 15 didn’t do that, I switched it back to the flat 12rd base pad. I’ll have to order these next
Good instructional video. I like the flat front better.
Jut ordered two. I had quit using the two 12 round mags for my P365 as a direct result of the wiggle with the stock mag sleeve.
I bought the straight 12 round base pad and love it. I don't like the curved based pads. They are too far forward and push the mags back causing the mag to move in the gun too much. I'd recommend the straight one to anyone who has a 12 rounder. And it looks way better too.
Can you please make a compatible version of this for the magguts +2 kit for the 12 round P365 mags. As well as a version of the pro ledge for the magguts +2 kit for the og 10 round mags?
I really like the Flat!
Will you guys PLEASE make the Straight Extenders for the 365XL 12 round mags and frame!
Are these basepads compatible with magguts +2s for 10rd mags
Has anyone here tried both the pinky and the straight versions and found a difference? Too much pinky pressure sends me low and left (found after doing those right-hand-only two-finger drills with the middle and ring fingers). I'm thinking that straight isn't just an option to look better, but to shoot better as well. Any experiences out there to share?
where are the interchangeable pads for pinky extention you promised in the video and we need a pad for the magguts
Hi. This is new to me. What is the purpose of the Sleeve? Why use it? What advantage over the factory Sig mag does it have? Thanks.
Do they make mag clamps for this gun?
When do you plan to have the pinky version back in stock?
Can the straight sleeve work on the 10rnd mags ? I really want the flat
There is no wiggle in the factory one if you install it right. I had wiggle in mine and then realized I didn't have it mounted quite right. Reinstalled it and it doesn't move at all now.
I have two and they both came from the factory with the wiggle.
i think they all wiggle man, I talked to sig and they even say the wiggle. What you do to get yours nice and flush and tight
Do you have something similar for the wilson combat grip
Mag guts 12 round p365 compatible?
Will this work on a 12rd mag for the P365 in .380?
Thank you!
Does this work with
Mag guts
These are fucking bad ass. I personally like the flat sleeves
sir, i had troubles with mine in that the mag fell out and disassembled when shooting. 2 other times had problems. in seeing these i guess the spring caught like you were saying, but when i called sig about it they said no one else has ever had trouble. now i feel i was given the run around.
Can not get base to stay did it just like you did. Over and over bottom would shoot off mag.
The flat looks best
Let's do it.
Very cool, if only I could lay hands on a 365.
Sheepdog Gun Armory in North Las Vegas NV has a few in stock as of today. You can call them at 725-735-4832 and see if they still have any. Great people there.
what is your grip module? the flat looks really good!
Standard grip module
I usually carry with the 10 rounder , and use a 12 as backup , the 12 & especially the 15 rounder defeat the purpose of the 365, discreet carry
These don’t work with the 365X correct?
I bought one but it won’t fit my X.
The p365x has the xl frame so no they do not. We make several others that do
Anyone know if you can use these with the mag guts mag extension
no,base plates are different
Does not work with magguts and they did not make the pinky extention like promised
Dude I CANNOT fit that 12th round in
You should try the new 17 round mags…I had to use the provided mag loader…so stiff. Put rounds in and let it sit for a bit sig mags are crazy tight
@@TacticalDev I got the 12th in on like the 7th try lol
I feel your pain. I have strong hands, but I still needed to get a Speed Beez loader to make it happen and then follow the advice to just let it sit for a while. They do eventually loosen up.
Yea the one I just bought wiggles
Really disappointed Sig
You comment is very vague. The OEM one wiggles, yes. If you saying basepad you bought from us wiggles please contact our support on the website and we can fix it
@@TacticalDev No no I mean the one that came from Sig wiggles. I ordered your sleeve to fix it. It’s on its way
@@stephengreico504 all good thanks just wasn’t sure what you where saying: but yeah the OEM one wiggles
Why is almost everything on your website for the P365 sold out???????? You going out of business or what???
Flat
Sig is the Down syndrome of gun
pitiful Sig couldn't make these wtf smh
Useless - you couldn't even tell if the base pad was seated correctly when YOU installed it so how is a customer supposed to know OR trust it not to 'walk off' for that matter? Doesn't instill much confidence, bro. With a magazine, no surprise is a GOOD surprise. If you're just a range junkie rock out, otherwise don't waste your for something that's not 100% when it HAS to work!
Make some more fu*kin rails please, SOLD OUT development should be your name
Yeah sold out 2 days ago more back in stock Friday.
Excellent video. Thank you. I will check you out on insta