Hate to admit it sir, I usually make all my purchases from ose, zippkits, or gizmo. Nobody had the cable I needed. One of your subscribers mentioned seducer. Low and behold they had what I needed. Thanks to you and your subscribers. thanks sir. You are awesome.
My son wanted a rc boat I order the boat and I saw your videos after lol holey !! Jesus Christ he is only 9 yrs old having fun together great hobby for both and Tks for the mod info I’ll send you a video of it soon😉
Good luck with the maiden. She runs excellent stock on 4s...... 6s she gets warm proboat recommends 4s operation 6s capable, best on 4s. Plenty fast. Oh yea WELCOME to the "BOAT GANG "
What I have done for years is after placing your prop onto the drive dog cut a small peace of fuel line the length of the drive dog teeth next up to the back of the prop then the nut to just touching the fuel line. Holds the prop onto the drive dog but it disengages if you hit anything with that expensive nicely sharp pend balanced prop u put on. Then it reengages right after by the fuel line. I have saved a lot of props doing it this way. on your shorter props no shims needed or moving drive dog back. like 5.52 min mark. Just what i do. but good video.
Zipp has the cable in stock. I like your flat spot wood block holder. Im still looking for your video that shows it, how do you remove the Teflon tube?
I use a pic tool with a curved tip reach in there puncture the Teflon liner and pull it out or you could put the flex cable in use the shaft to pull it out, from the inside
Good timing, getting ready to do the same swap out on my ul19. Any tips on getting that stuffing tube out? I feel like you said it in another vid, but cant remember which one lol.
I usually cut ST as close to the hull as possible then use a drill bit that fits perfectly inside the ST drill the tube until the tube heats up the glue, usually when the glue heats up it will break the stuffing tube loose so you can pull it out the boat
@@IRONCLADRC Thanks for the reply, but I have to make a correction to my question. Do you have any tips on removing the stuffing tube liner? Really sorry about that
I use a extra long pick tool that has a rounded off tip kinda like a tiny hook that I use to grab onto the liner from the inside it will hook the liner at the end or press it into the liner mid way and pull out
Hello how you been question? I broke my shaft cable stock first run on 6s should have known better same thing plasik straw melted lol. OSE is out of stock on 187 do you know sny other olace online yo get one thank you i learned alot from you
Hit something and broke my steering servo in my 19. Are your upgrades for more speed or holeshot. All I've done is split the cooling and dual return cooling lines
Thanks for the offer brother. I really need some one to make badges and emojis for memberships and supers? I don't know how to do it. If you want to make an intro I'd be glad to take a look at it. My email is ironcladedout@gmail.com. email me any time so we can talk about it
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
Hate to admit it sir, I usually make all my purchases from ose, zippkits, or gizmo. Nobody had the cable I needed. One of your subscribers mentioned seducer. Low and behold they had what I needed. Thanks to you and your subscribers. thanks sir. You are awesome.
I learned a lot here... never had to cut a drive dog notch,but now if i need to i feel it will be very simple...thanks
My son wanted a rc boat I order the boat and I saw your videos after lol holey !! Jesus Christ he is only 9 yrs old having fun together great hobby for both and Tks for the mod info I’ll send you a video of it soon😉
Good luck with the maiden. She runs excellent stock on 4s......
6s she gets warm proboat recommends 4s operation 6s capable, best on 4s. Plenty fast.
Oh yea WELCOME to the "BOAT GANG "
"Stick around guys, you might as well... you're here!" I like that 😄 Cool video BTW!
What I have done for years is after placing your prop onto the drive dog cut a small peace of fuel line the length of the drive dog teeth next up to the back of the prop then the nut to just touching the fuel line. Holds the prop onto the drive dog but it disengages if you hit anything with that expensive nicely sharp pend balanced prop u put on. Then it reengages right after by the fuel line. I have saved a lot of props doing it this way. on your shorter props no shims needed or moving drive dog back. like 5.52 min mark. Just what i do. but good video.
Thanks for the tip brother
I used to buy my cables at OSE but many times they are out of stock, now I buy cable at Seaducers boat and I do it myself loke you did
Glad to see you finally got the U-19. I have had my about a year. It's super fast boat
As I keep saying, you ROCK, Bro. Learning tons from you, Sir. Thanks
Nice info brother , I know the feeling from one shop and then going to the house your not alone lol great video B !!!
I learned so much! Thank you for all these kick ass videos.
Nice one 👌🏻 Super keen to get the blackjack in the water. Waiting on my speedy to arrive from the states and she'll be ready to rip. Love your work
Have a nice day man, 🤣🤣☺️🤣☺️☺️ after your happy meter and funny drill
Zipp has the cable in stock. I like your flat spot wood block holder. Im still looking for your video that shows it, how do you remove the Teflon tube?
I use a pic tool with a curved tip reach in there puncture the Teflon liner and pull it out or you could put the flex cable in use the shaft to pull it out, from the inside
Thank you very much.
I use a chuck I took off a dead drill to make my cable cuts
I might steel your idea. Lol.
That's a good idea!
Hahaha dude when the blade broke I was like ahh hell 🤣🤣🤣
Just got mine, almost scared to open the box. Jitters. 😂😂😂 lol
You'll love it brother trust me
Very Informative. To bad you purchased the last 3/16 cable.....ROFL....
He should restock shortly
Good timing, getting ready to do the same swap out on my ul19. Any tips on getting that stuffing tube out? I feel like you said it in another vid, but cant remember which one lol.
I usually cut ST as close to the hull as possible then use a drill bit that fits perfectly inside the ST drill the tube until the tube heats up the glue, usually when the glue heats up it will break the stuffing tube loose so you can pull it out the boat
@@IRONCLADRC Thanks for the reply, but I have to make a correction to my question. Do you have any tips on removing the stuffing tube liner? Really sorry about that
I use a extra long pick tool that has a rounded off tip kinda like a tiny hook that I use to grab onto the liner from the inside it will hook the liner at the end or press it into the liner mid way and pull out
@@IRONCLADRC Thanks B
Hello how you been question? I broke my shaft cable stock first run on 6s should have known better same thing plasik straw melted lol. OSE is out of stock on 187 do you know sny other olace online yo get one thank you i learned alot from you
I got mine from zippkits.com or wholts rc boat supply
Hit something and broke my steering servo in my 19. Are your upgrades for more speed or holeshot. All I've done is split the cooling and dual return cooling lines
Great tips thx mate
ps you need to file down flat that yellow piece on your tape measure..lol
I DIDENT SEE YOU SOLDER THE END OF THE DRIVE SHAFT ? DID I MISS SOMETHING ?
I didn't solder it yet. Actually slipped my mind
Sweet man bad ass
This boat is nut have to upgrade everything lol
Not really. If you run her on 4s she's ironclad stock. But I'd you wanna run 6s yes she needs alot of work. Worth it in the long run.
What happened to the fins?
Broke off in a flip. They don't float lol.
Do you have a 160 amp on the sonic wake?
No the v2 is 100% stock only thing I've upgraded is the stinger
I got 160 amp for it .. will it work?
Hey just curious if you would be interested in me make you a intro for your vid’s I’ll do it 100% free let me know PS love the videos
Thanks for the offer brother. I really need some one to make badges and emojis for memberships and supers? I don't know how to do it. If you want to make an intro I'd be glad to take a look at it. My email is ironcladedout@gmail.com. email me any time so we can talk about it
Remember Big b , Jesus Christ is not a swear word! 🚤💯