Find your Harley security password
HTML-код
- Опубликовано: 10 сен 2016
- Must see for Harley owners. Find and record your bike's security password in case your key fob battery goes dead or you lose it. Don't get caught away from home with no way to start your bike.
Авто/Мото
Finally! It worked! I tried other channels instructions but it didn’t work. Yours did. Thanks man!!!
Thank you sir, bought a bike from a private owner and didn’t know the pin. Great info.
Thanks for video! Your the man
Thanks, this process worked on my 2013 Road Glide Custom.... I put my PIN in my "vault".
thank you sir very helpful I tried other suggestions yours was right on the money🎉
works like a charm, thank you
Thanks, works fine on my fat bob 08.😉😎
Thanks a lot
Didn't work on my Australian delivered 2010 heritage softail... May be different
Haha thanks alot! Saved me from a nice headache!
The Sequence is different on older models of the Dyna, this doesn't work on my 08 Dyna. Even the Owners manual says to do the same thing this video shows but still doesn't work.
worked on my 2012 CVO EG
Thanks
How would I do this on an 07 Dyna Street Bob if I dont have the switch in the center?
I would have thought this method would work on the 07. Maybe google it. Sorry.
What year or series bike is this, in the last video I watched , the guy said
press left signal twice in step two, not 3 times.
Which is it for a 2009 Electra Glide Ultra?
Thanks.
2008 Road King Classic
@@MarionBlair Thanks..
Well done video
Thank you
Thank you so much!
I came home and tried it a few times and it didn’t come up. I do have a pin set. Does it matter if your bike has factory alarm? Can’t get my bike going lol
i've tried this so many times on my 2012 dyna fat bob, and still no pin numbers appear. It's so frustrating!!!!
What if signals dont blink
Not to doubt what you say, but I have tried this on my 2006 Electra Ultra and it doesn't work. Any ideas?
No sorry it doesn't work on your bike, apparently some bikes have a different procedure
What years does this video cover.
Does anyone have a link or youtube title for the 2009 procedure?
Should be same procedure
ruclips.net/video/cmcsA2jr4yU/видео.html
@@MarionBlair qqqq why I have lost my keyboard problem I can't find it and I can't get my bike to start
Will this work on an 09 Softail or just touring bikes? It does have a key FOB as well. Thanks for posting.
Hi I'm pretty sure it will work on the Softail they're very similar
@@MarionBlair what if I dont have the key fob and no code? Bought the bike at an auction. How can I get the code?
That happened to me and had to get the dealer to reset. Sorry.
This is for 2013 and older HD's... 2014 and newer is different
Why couldn't he just tell us that in the title, people seem to
be afraid to be concise.
If this procedure is for 2013, how far back do you think it goes?
I have a 2009.
In a previous vid I watched, it was a 2019 , he said for step
two , to press left turn sig twice , not three times like in this video.
Thanks……thanks A+
So how do u start it from there? My husband passed and we can't find the keys to his 2000 or his 2012 fatbob.
Sorry to hear that. I think I would contact the dealer and ask that question. They may have to disable it for you which they can easily do.
Why wont a 16 cvo start w fobs after battery swap.... or lock saddlebags only aaks for pin that i dont have.
it's likely due to the security system being triggered. Here are some things you can try:
If the fob battery is low or dead, the motorcycle might not recognize it.
Default PIN: If you haven't set a custom PIN, it might be the default factory PIN. Check your owner's manual for the default code or contact the dealer.
Follow these steps to enter the PIN:
Turn the ignition key to the "On" position.
Hold the left turn signal button until you see "Enter PIN" on the display.
Use the turn signal buttons to enter your PIN. The left button changes the digit, and the right button moves to the next digit.
Battery Connections: Double-check the battery connections.
System Reset: Sometimes, resetting the security system can help. This can often be done by disconnecting the battery again for a few minutes, then reconnecting it and trying the start sequence again.
If all else fails, contact your Harley-Davidson dealer. They can help you.
Interesting but your video does not tell how to use the code once you know it
Does not work on my 2020 RoadKing.
Would you happen to know if the security system on my 2009 Softail Custom will "forget" my code because the battery has been out of it for a while or will it fire right up as soon as I put a new battery in it?
No, mine did that also and the dealer has to reset it for you as far as I know.
Always use a battery tender if your ride is parked more than few days or if you drive short distances
Will this work if you don’t have the fob? I’m tryin to figure out why my bikes not getting any spark ?
Probably not. Take it to Harley and let them reset the fob and bike.
Works on my FLHXSE3....but, not on my Wife's '15 FLD
I don't get why 'presenters' don't tell us what year their bikes are,
it matters.
sorry, 2008, I'm an amateur, is that a good enough excuse, ha.
why doesn't it work on Dyna 2007?
04 Dyna glide
This doesn't work. I have the fob
Sorry, apparently it doesn't work the same on all bikes.
This does not work on a 2013 Ultra Classic … now what ?
my battery of harley sportster went dead, i tried to jump it but my alarm started when i try to remove battery, now it's asking for a pin number which i never had a pin number what can i do to start my engine,i have my key fobs but i don't know my pin number
If you've never changed the code or pin the factory pin should be 11111. Or 12345 or last 5 digits of vin. If one of the last 5 #s is 0 use 1 instead.
Didnt work for me. My mileage came up. No PIN number. What am I doing wrong, anyone....thanks.
Do you need the key fob while you look for your pin? What’s to stop anyone from doing this?
Yes, you need the Fob to find the pin.
Is this the same for all harely ? I have a 03 utra classic....
I think so
2001 classic does the lights but dont show. Me any code
@@boordbelsj you ever figure it out? I have the same bike
@@jameskappes9893 nope unfortunally i say get rid of it and buy a newer one. Parts will be more rear than common.
Little example
Camshaft crankshaft bolts not available, need new ones every camchain tensioner job.(or when you loosen them for what reason so ever)
Fuelfilter not available
Camplate not available if need new buy a se, s&s or fuehling know the costs
Cutsom airfilters only 5 different if you have luck they will fitt or else buy new housing with it.
Or go back to stock.
Tuning is also not really possible because of the magnetti mirelli.
Its very limited.
@@boordbelsj what type of tuner were you trying to use?
any idea for a 2014 softail deluxe???
No sorry. Might be a video on it?
This doesn't work on my 2002 Road King
Doesn’t work on a 2010 road king
00:30 ''Leave it on on the last time'' , I hope you mean turn it back on
after the last cycle.
ON OFF
ON OFF
ON OFF
ON.
Incorrect. ON-OFF ON-OFF ON. Leave it on the third time you turn it.
@@Robb0h Thanks man, yeah I've
done this a bunch of times now,
and showed someone else how
to do it for their bike, thanks...
This won’t work on my 2011 softail
You dont say how to start it with the code.
This does not work for my 2012 FLSTC... :(
How did you find it?
What year bike won't work on my 2009, now I was able get my own pin in now how do I start it
2008
@@MarionBlair now I have my own pin in there how do I start it ,
Did not work on my 2011 Road King
Same. What does work for a road king
What do you do if you don’t have your FOB and you have forgotten your password?
Unless you put in your own password previously it should be the generic password I believe I mentioned
To retrieve your pass you needed to have your fob with you?
I see mentioned that the factory pass is 3_1_3_1_3 is this right?
@@markgiles8527 yeah I think so. I don't have that motorcycle anymore
Hey, is it true that if I take my bike to a Harley-Davidson dealer that they can connect my bike to a computer and the pass for the security can be read? I purchased a bike without a key, fob and the pass is unknown. It’s an insurance case. But they don’t tell me or provide any information. Now I am left trying to figure out what I can do to get my bike to start.
buon giorno grazie del video interessante esemplice da capire ,chiedo ho un fat boy il coperchio qudro non sichiude con il solito scatto (si chiude ma non bene ) cosa bisogna fare grazie ancora
Why doesn't this work for 2017 rk
I'm not sure. I guess they changed the procedure. It is a pain in the ass.
But if you don’t have fob at at how dose it start what do you have to do
Expect you need the Dealer's help in that case
Does not work
I did this and nothing came up.
might mean a PIN hasn't been set yet. Follow the instructions in the owner's manual to set one.
On my 04 Harley road king I held the trip button on the side and turned the switch/knob to the run position at the same time and it popped up not sure if it’s the correct numbers but seems to be
Now how do you enter the code?
Did you ever find out how to enter the code?
Ya I was thinking the same , ya you got code and now what ??
How to enter it ?
Not yet.
@@courtman11 I found it , gotta use turn signal buttons
@@shadowsgarage6801Yes, but what are the inputs?
05 Road King you need your FOB. off ON off ON off ON, left turn twice, FOB twice. Code shows on odometer.
Lol a a
This does not work.